| * Qualcomm MSM Watchdog |
| |
| Watchdog timer is configured with a bark and a bite time. |
| if the watchdog is not "pet" at regular intervals, the system |
| is assumed to have become non responsive and needs to be reset. |
| A warning in the form of a bark timeout leads to a bark interrupt |
| and a kernel panic. if the watchdog timer is still not reset, |
| a bite timeout occurs, which is an interrupt in the secure mode, |
| which leads to a reset of the SOC via the secure watchdog. The |
| driver needs the petting time, and the bark timeout to be programmed |
| into the watchdog, as well as the bark and bite irqs. |
| |
| The device tree parameters for the watchdog are: |
| |
| Required properties: |
| |
| - compatible : "qcom,msm-watchdog" |
| - reg : offset and length of the register set for the watchdog block. |
| - reg-names : names corresponding to each reg property value. |
| "wdt-base" - physical base address of watchdog timer registers |
| "wdt-absent-base" - physical base address of watchdog absent register |
| - interrupts : should contain bark and bite irq numbers |
| - qcom,pet-time : Non zero time interval at which watchdog should be pet in ms. |
| - qcom,bark-time : Non zero timeout value for a watchdog bark in ms. |
| |
| Optional properties: |
| |
| - qcom,ipi-ping : (boolean) send keep alive ping to other cpus if present |
| |
| Example: |
| |
| qcom,wdt@f9017000 { |
| compatible = "qcom,msm-watchdog"; |
| reg = <0xf9017000 0x1000>; |
| reg-names = "wdt-base"; |
| interrupts = <0 3 0>, <0 4 0>; |
| qcom,bark-time = <11000>; |
| qcom,pet-time = <10000>; |
| qcom,ipi-ping; |
| }; |
