| /* Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/input.h> |
| |
| #include "sm8150-pmic-overlay.dtsi" |
| #include "sm8150-sde-display.dtsi" |
| #include "sm8150-camera-sensor-mtp.dtsi" |
| #include "sm8150-thermal-overlay.dtsi" |
| |
| &qupv3_se4_i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| #include "smb1390.dtsi" |
| #include "smb1355.dtsi" |
| }; |
| |
| &qupv3_se12_2uart { |
| status = "ok"; |
| }; |
| |
| &vendor { |
| bluetooth: bt_wcn3990 { |
| compatible = "qca,wcn3990"; |
| qca,bt-vdd-core-supply = <&pm8150_l7>; |
| qca,bt-vdd-pa-supply = <&pm8150l_l2>; |
| qca,bt-vdd-ldo-supply = <&pm8150l_l11>; |
| |
| qca,bt-vdd-core-voltage-level = <1800000 1800000>; |
| qca,bt-vdd-pa-voltage-level = <1304000 1304000>; |
| qca,bt-vdd-ldo-voltage-level = <3312000 3312000>; |
| |
| qca,bt-vdd-core-current-level = <0>; /* LPM/PFM */ |
| qca,bt-vdd-pa-current-level = <0>; /* LPM/PFM */ |
| qca,bt-vdd-ldo-current-level = <0>; /* LPM/PFM */ |
| }; |
| |
| mtp_batterydata: qcom,battery-data { |
| qcom,batt-id-range-pct = <15>; |
| #include "fg-gen4-batterydata-alium-3600mah.dtsi" |
| }; |
| |
| extcon_usb1: extcon_usb1 { |
| compatible = "linux,extcon-usb-gpio"; |
| vbus-gpio = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>; |
| id-gpio = <&tlmm 101 GPIO_ACTIVE_HIGH>; |
| vbus-out-gpio = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb2_vbus_det_default |
| &usb2_id_det_default |
| &usb2_vbus_boost_default>; |
| }; |
| }; |
| |
| &qupv3_se13_4uart { |
| status = "ok"; |
| }; |
| |
| &qupv3_se3_spi { |
| status = "ok"; |
| }; |
| |
| &qupv3_se4_i2c { |
| status = "ok"; |
| }; |
| |
| &soc { |
| gpio_keys { |
| compatible = "gpio-keys"; |
| label = "gpio-keys"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&key_vol_up_default>; |
| |
| vol_up { |
| label = "volume_up"; |
| gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; |
| linux,input-type = <1>; |
| linux,code = <KEY_VOLUMEUP>; |
| gpio-key,wakeup; |
| debounce-interval = <15>; |
| linux,can-disable; |
| }; |
| }; |
| |
| qcom,qbt1000 { |
| compatible = "qcom,qbt1000"; |
| clock-names = "core", "iface"; |
| clock-frequency = <25000000>; |
| qcom,ipc-gpio = <&tlmm 118 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&key_home_default>; |
| qcom,finger-detect-gpio = <&pm8150_gpios 1 0>; |
| }; |
| }; |
| |
| &dsi_sharp_4k_dsc_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "dual_port"; |
| qcom,panel-mode-gpio = <&tlmm 7 0>; |
| qcom,platform-te-gpio = <&tlmm 8 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| }; |
| |
| &dsi_sharp_4k_dsc_video { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "dual_port"; |
| qcom,panel-mode-gpio = <&tlmm 7 0>; |
| qcom,platform-te-gpio = <&tlmm 8 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| }; |
| |
| &dsi_sim_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| }; |
| |
| &dsi_sim_vid { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| }; |
| |
| &dsi_dual_sim_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| }; |
| |
| &dsi_dual_sim_vid { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| }; |
| |
| &dsi_sim_sec_hd_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply_vdd_no_labibb>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "single_port"; |
| qcom,panel-mode-gpio = <&tlmm 7 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| qcom,panel-sec-mode-gpio = <&tlmm 77 0>; |
| qcom,platform-sec-reset-gpio = <&tlmm 66 0>; |
| }; |
| |
| &dsi_dual_nt35597_truly_video { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "dual_port"; |
| qcom,panel-mode-gpio = <&tlmm 7 0>; |
| qcom,platform-te-gpio = <&tlmm 8 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| }; |
| |
| &dsi_dual_nt35597_truly_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "dual_port"; |
| qcom,panel-mode-gpio = <&tlmm 7 0>; |
| qcom,platform-te-gpio = <&tlmm 8 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| }; |
| |
| &dsi_sim_dsc_375_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| }; |
| |
| &dsi_dual_sim_dsc_375_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs"; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| }; |
| |
| &dsi_nt35597_truly_dsc_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "single_port"; |
| qcom,panel-mode-gpio = <&tlmm 7 0>; |
| qcom,platform-te-gpio = <&tlmm 8 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| }; |
| |
| &dsi_nt35597_truly_dsc_video { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "single_port"; |
| qcom,panel-mode-gpio = <&tlmm 7 0>; |
| qcom,platform-te-gpio = <&tlmm 8 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| }; |
| |
| &dsi_nt35695b_truly_fhd_cmd { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "single_port"; |
| qcom,panel-mode-gpio = <&tlmm 7 0>; |
| qcom,platform-te-gpio = <&tlmm 8 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| }; |
| |
| &dsi_nt35695b_truly_fhd_video { |
| qcom,panel-supply-entries = <&dsi_panel_pwr_supply>; |
| qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled"; |
| qcom,mdss-dsi-bl-min-level = <1>; |
| qcom,mdss-dsi-bl-max-level = <4095>; |
| qcom,mdss-dsi-mode-sel-gpio-state = "single_port"; |
| qcom,panel-mode-gpio = <&tlmm 7 0>; |
| qcom,platform-te-gpio = <&tlmm 8 0>; |
| qcom,platform-reset-gpio = <&tlmm 6 0>; |
| }; |
| |
| &qupv3_se9_i2c { |
| status = "ok"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| nq@28 { |
| compatible = "qcom,nq-nci"; |
| reg = <0x28>; |
| qcom,nq-irq = <&tlmm 47 0x00>; |
| qcom,nq-ven = <&tlmm 41 0x00>; |
| qcom,nq-firm = <&tlmm 48 0x00>; |
| qcom,nq-clkreq = <&tlmm 113 0x00>; |
| qcom,nq-esepwr = <&tlmm 42 0x00>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <47 0>; |
| interrupt-names = "nfc_irq"; |
| pinctrl-names = "nfc_active", "nfc_suspend"; |
| pinctrl-0 = <&nfc_int_active &nfc_enable_active |
| &nfc_clk_req_active>; |
| pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend |
| &nfc_clk_req_suspend>; |
| }; |
| }; |
| |
| &ufsphy_mem { |
| compatible = "qcom,ufs-phy-qmp-v4"; |
| |
| vdda-phy-supply = <&pm8150_l5>; |
| vdda-phy-always-on; |
| vdda-pll-supply = <&pm8150l_l3>; |
| vdda-phy-max-microamp = <90200>; |
| vdda-pll-max-microamp = <19000>; |
| |
| status = "ok"; |
| }; |
| |
| &ufshc_mem { |
| vdd-hba-supply = <&ufs_phy_gdsc>; |
| vdd-hba-fixed-regulator; |
| vcc-supply = <&pm8150_l10>; |
| vcc-voltage-level = <2504000 2950000>; |
| vcc-low-voltage-sup; |
| vccq-supply = <&pm8150_l9>; |
| vccq2-supply = <&pm8150_s4>; |
| vcc-max-microamp = <750000>; |
| vccq-max-microamp = <700000>; |
| vccq2-max-microamp = <750000>; |
| |
| qcom,vddp-ref-clk-supply = <&pm8150_l9>; |
| qcom,vddp-ref-clk-max-microamp = <100>; |
| |
| status = "ok"; |
| }; |
| |
| &spmi_debug_bus { |
| status = "ok"; |
| }; |
| |
| &pm8150l_wled { |
| qcom,string-cfg= <7>; |
| qcom,leds-per-string = <6>; |
| status = "ok"; |
| }; |
| |
| &pm8150l_lcdb { |
| status = "ok"; |
| }; |
| |
| &pm8150b_fg { |
| qcom,battery-data = <&mtp_batterydata>; |
| qcom,hold-soc-while-full; |
| qcom,linearize-soc; |
| qcom,five-pin-battery; |
| qcom,cl-wt-enable; |
| /* ESR fast calibration */ |
| qcom,fg-esr-timer-chg-fast = <0 7>; |
| qcom,fg-esr-timer-dischg-fast = <0 7>; |
| qcom,fg-esr-timer-chg-slow = <0 96>; |
| qcom,fg-esr-timer-dischg-slow = <0 96>; |
| qcom,fg-esr-cal-soc-thresh = <26 230>; |
| qcom,fg-esr-cal-temp-thresh = <10 40>; |
| }; |
| |
| &sdhc_2 { |
| vdd-supply = <&pm8150l_l9>; |
| qcom,vdd-voltage-level = <2950000 2960000>; |
| qcom,vdd-current-level = <200 800000>; |
| |
| vdd-io-supply = <&pm8150l_l6>; |
| qcom,vdd-io-voltage-level = <1808000 2960000>; |
| qcom,vdd-io-current-level = <200 22000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &storage_cd>; |
| pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &storage_cd>; |
| |
| cd-gpios = <&tlmm 96 GPIO_ACTIVE_LOW>; |
| |
| status = "ok"; |
| }; |
| |
| &pm8150b_vadc { |
| vph_pwr { |
| reg = <ADC_VPH_PWR>; |
| label = "vph_pwr"; |
| qcom,pre-scaling = <1 3>; |
| }; |
| |
| wp_therm { |
| reg = <ADC_AMUX_THM1_PU2>; |
| label = "wp_therm"; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| }; |
| |
| vcoin { |
| reg = <ADC_VCOIN>; |
| label = "vcoin"; |
| qcom,pre-scaling = <1 3>; |
| }; |
| |
| conn_therm { |
| reg = <ADC_AMUX_THM3_PU2>; |
| label = "conn_therm"; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| }; |
| |
| chg_sbux { |
| reg = <ADC_SBUx>; |
| label = "chg_sbux"; |
| qcom,pre-scaling = <1 3>; |
| }; |
| |
| mid_chg_div6 { |
| reg = <ADC_MID_CHG_DIV6>; |
| label = "chg_mid"; |
| qcom,pre-scaling = <1 6>; |
| }; |
| |
| usb_in_i_uv { |
| reg = <ADC_USB_IN_I>; |
| label = "usb_in_i_uv"; |
| qcom,pre-scaling = <1 1>; |
| }; |
| |
| usb_in_v_div_16 { |
| reg = <ADC_USB_IN_V_16>; |
| label = "usb_in_v_div_16"; |
| qcom,pre-scaling = <1 16>; |
| }; |
| }; |
| |
| &pm8150_vadc { |
| vph_pwr { |
| reg = <ADC_VPH_PWR>; |
| label = "vph_pwr"; |
| qcom,pre-scaling = <1 3>; |
| }; |
| |
| vcoin { |
| reg = <ADC_VCOIN>; |
| label = "vcoin"; |
| qcom,pre-scaling = <1 3>; |
| }; |
| |
| xo_therm { |
| reg = <ADC_XO_THERM_PU2>; |
| label = "xo_therm"; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| }; |
| |
| skin_therm { |
| reg = <ADC_AMUX_THM1_PU2>; |
| label = "skin_therm"; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| }; |
| |
| pa_therm1 { |
| reg = <ADC_AMUX_THM2_PU2>; |
| label = "pa_therm1"; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| }; |
| }; |
| |
| &pm8150l_vadc { |
| vph_pwr { |
| reg = <ADC_VPH_PWR>; |
| label = "vph_pwr"; |
| qcom,pre-scaling = <1 3>; |
| }; |
| |
| camera_flash_therm { |
| reg = <ADC_AMUX_THM1_PU2>; |
| label = "camera_flash_therm"; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| }; |
| |
| skin_msm_therm { |
| reg = <ADC_AMUX_THM2_PU2>; |
| label = "skin_msm_therm"; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| }; |
| |
| pa_therm2 { |
| reg = <ADC_AMUX_THM3_PU2>; |
| label = "pa_therm2"; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| }; |
| }; |
| |
| &wil6210 { |
| status = "ok"; |
| }; |
| |
| &mhi_0 { |
| mhi,fw-name = "debug.mbn"; |
| }; |
| |
| &pm8150b_adc_tm { |
| wp_therm { |
| reg = <ADC_AMUX_THM1_PU2>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| }; |
| }; |
| |
| &pm8150_adc_tm { |
| xo_therm { |
| reg = <ADC_XO_THERM_PU2>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| }; |
| |
| skin_therm { |
| reg = <ADC_AMUX_THM1_PU2>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| }; |
| |
| pa_therm1 { |
| reg = <ADC_AMUX_THM2_PU2>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| }; |
| }; |
| |
| &pm8150l_adc_tm { |
| camera_flash_therm { |
| reg = <ADC_AMUX_THM1_PU2>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| }; |
| |
| skin_msm_therm { |
| reg = <ADC_AMUX_THM2_PU2>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| }; |
| |
| pa_therm2 { |
| reg = <ADC_AMUX_THM3_PU2>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| }; |
| }; |
| |
| &thermal_zones { |
| wp-therm { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "user_space"; |
| thermal-sensors = <&pm8150b_adc_tm ADC_AMUX_THM1_PU2>; |
| wake-capable-sensor; |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| xo-therm { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "user_space"; |
| thermal-sensors = <&pm8150_adc_tm ADC_XO_THERM_PU2>; |
| wake-capable-sensor; |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| skin-therm { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "user_space"; |
| thermal-sensors = <&pm8150_adc_tm ADC_AMUX_THM1_PU2>; |
| wake-capable-sensor; |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| pa-therm1 { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "user_space"; |
| thermal-sensors = <&pm8150_adc_tm ADC_AMUX_THM2_PU2>; |
| wake-capable-sensor; |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| camera-flash-therm { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "user_space"; |
| thermal-sensors = <&pm8150l_adc_tm ADC_AMUX_THM1_PU2>; |
| wake-capable-sensor; |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| skin-msm-therm { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "user_space"; |
| thermal-sensors = <&pm8150l_adc_tm ADC_AMUX_THM2_PU2>; |
| wake-capable-sensor; |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| |
| pa-therm2 { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-governor = "user_space"; |
| thermal-sensors = <&pm8150l_adc_tm ADC_AMUX_THM3_PU2>; |
| wake-capable-sensor; |
| trips { |
| active-config0 { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "passive"; |
| }; |
| }; |
| }; |
| }; |
| |
| &pm8150b_charger { |
| qcom,sec-charger-config = <3>; |
| qcom,auto-recharge-soc = <98>; |
| io-channels = <&pm8150b_vadc ADC_MID_CHG_DIV6>, |
| <&pm8150b_vadc ADC_USB_IN_I>, |
| <&pm8150b_vadc ADC_SBUx>, |
| <&pm8150b_vadc ADC_VPH_PWR>, |
| <&pm8150b_vadc ADC_CHG_TEMP>, |
| <&pm8150b_vadc ADC_USB_IN_V_16>; |
| io-channel-names = "mid_voltage", |
| "usb_in_current", |
| "sbux_res", |
| "vph_voltage", |
| "chg_temp", |
| "usb_in_voltage"; |
| qcom,battery-data = <&mtp_batterydata>; |
| qcom,step-charging-enable; |
| qcom,sw-jeita-enable; |
| qcom,wd-bark-time-secs = <16>; |
| qcom,suspend-input-on-debug-batt; |
| }; |
| |
| &smb1390 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&smb_stat_default>; |
| status = "ok"; |
| }; |
| |
| &smb1390_charger { |
| /delete-property/ compatible; |
| compatible = "qcom,smb1390-charger-psy"; |
| io-channels = <&pm8150b_vadc ADC_AMUX_THM2>; |
| io-channel-names = "cp_die_temp"; |
| status = "ok"; |
| }; |
| |
| &usb1 { |
| extcon = <&extcon_usb1>; |
| status = "ok"; |
| }; |
| |
| &usb2_phy1 { |
| status = "ok"; |
| }; |
| |
| &usb_qmp_phy { |
| status = "ok"; |
| }; |
| |
| &smb1355 { |
| status = "ok"; |
| }; |
| |
| &smb1355_charger { |
| io-channels = <&pm8150b_vadc ADC_AMUX_THM2>; |
| io-channel-names = "charger_temp"; |
| status = "ok"; |
| }; |
