arch/arm64/boot/dts/qcom/sa6155-adp-air.dtsi - kernel/msm.git - Git at Google

 /* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/qcom,gcc-sm6150.h>
 #include "sa6155-cnss.dtsi"

 &bluetooth_ext {
 	status = "ok";
 };

 &qupv3_se6_spi {
 	status = "ok";
 	can-controller@0 {
 		compatible = "qcom,nxp,mpc5746c";
 		reg = <0>;
 		interrupt-parent = <&tlmm>;
 		interrupts = <40 0>;
 		spi-max-frequency = <5000000>;
 		qcom,clk-freq-mhz = <40000000>;
 		qcom,max-can-channels = <1>;
 		qcom,bits-per-word = <8>;
 		qcom,support-can-fd;
 	};
 };

 &soc {
 	qcom,lpass@62400000 {
 		status = "ok";
 		qcom,pil-force-shutdown;
 	};

 	qcom,glink {
 		modem {
 			status = "disabled";
 		};
 	};

 	ss5_pwr_ctrl0 {
 		compatible = "gnss_sirf";
 		pinctrl-0 = <&ss5_pwr_ctrl_rst_on>;
 		ssVreset-gpio = <&tlmm 87 1>;
 		ssVonoff-gpio = <&tlmm 18 1>;
 	};

 	hsi2s: qcom,hsi2s {
 		compatible = "qcom,sa6155-hsi2s", "qcom,hsi2s";
 		number-of-interfaces = <2>;
 		reg = <0x1B40000 0x28000>;
 		reg-names = "lpa_if";
 		interrupts = <GIC_SPI 267 0>;
 		clocks = <&clock_gcc GCC_SDR_CORE_CLK>,
 			 <&clock_gcc GCC_SDR_WR0_MEM_CLK>,
 			 <&clock_gcc GCC_SDR_WR1_MEM_CLK>,
 			 <&clock_gcc GCC_SDR_WR2_MEM_CLK>,
 			 <&clock_gcc GCC_SDR_CSR_HCLK>;
 		clock-names = "core_clk", "wr0_mem_clk",
 			      "wr1_mem_clk", "wr2_mem_clk",
 			      "csr_hclk";
 		number-of-rate-detectors = <2>;
 		rate-detector-interfaces = <0 1>;

 		sdr0: qcom,hs0_i2s {
 			compatible = "qcom,hsi2s-interface";
 			minor-number = <0>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&hs0_i2s_sck_active &hs0_i2s_data0_active
 				     &hs0_i2s_data1_active>;
 			pinctrl-1 = <&hs0_i2s_sck_sleep &hs0_i2s_data0_sleep
 				     &hs0_i2s_data1_sleep>;
 			clocks = <&clock_gcc GCC_SDR_PRI_MI2S_CLK>;
 			clock-names = "pri_mi2s_clk";
 			iommus = <&apps_smmu 0x035C 0x0>;
 			qcom,smmu-s1-bypass;
 			qcom,iova-mapping = <0x0 0xFFFFFFFF>;
 			bit-clock-hz = <12288000>;
 			data-buffer-ms = <10>;
 			bit-depth = <32>;
 			spkr-channel-count = <2>;
 			mic-channel-count = <2>;
 			pcm-rate = <2>;
 			pcm-sync-src = <0>;
 			aux-mode = <0>;
 			rpcm-width = <1>;
 			tpcm-width = <1>;
 			enable-tdm = <1>;
 			tdm-rate = <32>;
 			tdm-rpcm-width = <16>;
 			tdm-tpcm-width = <16>;
 			tdm-sync-delay = <2>;
 			tdm-inv-sync = <0>;
 			pcm-lane-config = <1>;
 		};

 		sdr1: qcom,hs1_i2s {
 			compatible = "qcom,hsi2s-interface";
 			minor-number = <1>;
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&hs1_i2s_sck_active &hs1_i2s_data0_active
 				     &hs1_i2s_data1_active>;
 			pinctrl-1 = <&hs1_i2s_sck_sleep &hs1_i2s_data0_sleep
 				     &hs1_i2s_data1_sleep>;
 			clocks = <&clock_gcc GCC_SDR_SEC_MI2S_CLK>;
 			clock-names = "sec_mi2s_clk";
 			iommus = <&apps_smmu 0x035D 0x0>;
 			qcom,smmu-s1-bypass;
 			qcom,iova-mapping = <0x0 0xFFFFFFFF>;
 			bit-clock-hz = <12288000>;
 			data-buffer-ms = <10>;
 			bit-depth = <32>;
 			spkr-channel-count = <2>;
 			mic-channel-count = <2>;
 			pcm-rate = <2>;
 			pcm-sync-src = <0>;
 			aux-mode = <0>;
 			rpcm-width = <1>;
 			tpcm-width = <1>;
 			enable-tdm = <1>;
 			tdm-rate = <32>;
 			tdm-rpcm-width = <16>;
 			tdm-tpcm-width = <16>;
 			tdm-sync-delay = <2>;
 			tdm-inv-sync = <0>;
 			pcm-lane-config = <1>;
 		};
 	};

 	emac_hw: qcom,emac@20000 {
 		compatible = "qcom,emac-dwc-eqos";
 		qcom,arm-smmu;
 		reg = <0x20000 0x10000>,
 			<0x36000 0x100>;
 		reg-names = "emac-base", "rgmii-base";
 		dma-bit-mask = <32>;
 		emac-core-version = <7>;
 		interrupts-extended = <&pdc 0 660 4>, <&pdc 0 661 4>,
 			<&tlmm 121 2>, <&pdc 0 651 4>,
 			<&pdc 0 652 4>, <&pdc 0 653 4>,
 			<&pdc 0 654 4>, <&pdc 0 655 4>,
 			<&pdc 0 656 4>, <&pdc 0 657 4>,
 			<&pdc 0 658 4>, <&pdc 0 659 4>,
 			<&pdc 0 668 4>, <&pdc 0 669 4>;
 		interrupt-names = "sbd-intr", "lpi-intr",
 			"phy-intr", "tx-ch0-intr",
 			"tx-ch1-intr", "tx-ch2-intr",
 			"tx-ch3-intr", "tx-ch4-intr",
 			"rx-ch0-intr", "rx-ch1-intr",
 			"rx-ch2-intr", "rx-ch3-intr",
 			"ptp_pps_irq_0","ptp_pps_irq_1";
 		qcom,msm-bus,name = "emac";
 		qcom,msm-bus,num-cases = <4>;
 		qcom,msm-bus,num-paths = <2>;
 		qcom,msm-bus,vectors-KBps =
 			<98 512 0 0>, <1 781 0 0>,  /* No vote */
 			<98 512 1250 0>, <1 781 0 40000>,  /* 10Mbps vote */
 			<98 512 12500 0>, <1 781 0 40000>,  /* 100Mbps vote */
 			<98 512 125000 0>, <1 781 0 40000>; /* 1000Mbps vote */
 		qcom,bus-vector-names = "0", "10", "100", "1000";
 		clocks = <&clock_gcc GCC_EMAC_AXI_CLK>,
 				<&clock_gcc GCC_EMAC_PTP_CLK>,
 				<&clock_gcc GCC_EMAC_RGMII_CLK>,
 				<&clock_gcc GCC_EMAC_SLV_AHB_CLK>;
 		clock-names = "eth_axi_clk", "eth_ptp_clk",
 				"eth_rgmii_clk", "eth_slave_ahb_clk";
 		qcom,phy-reset = <&tlmm 104 GPIO_ACTIVE_HIGH>;
 		qcom,phy-intr-redirect = <&tlmm 121 GPIO_ACTIVE_LOW>;
 		gdsc_emac-supply = <&emac_gdsc>;
 		pinctrl-names = "dev-emac-mdc", "dev-emac-mdio",
 		"dev-emac-rgmii_txd0_state", "dev-emac-rgmii_txd1_state",
 		"dev-emac-rgmii_txd2_state", "dev-emac-rgmii_txd3_state",
 		"dev-emac-rgmii_txc_state",  "dev-emac-rgmii_tx_ctl_state",
 		"dev-emac-rgmii_rxd0_state", "dev-emac-rgmii_rxd1_state",
 		"dev-emac-rgmii_rxd2_state", "dev-emac-rgmii_rxd3_state",
 		"dev-emac-rgmii_rxc_state", "dev-emac-rgmii_rx_ctl_state",
 		"dev-emac-phy_intr", "dev-emac-phy_reset_state",
 		"dev-emac_pin_pps_0", "dev-emac-rgmii_rxc_suspend_state",
 		"dev-emac-rgmii_rxc_resume_state";

 		pinctrl-0 = <&emac_mdc>;
 		pinctrl-1 = <&emac_mdio>;
 		pinctrl-2 = <&emac_rgmii_txd0>;
 		pinctrl-3 = <&emac_rgmii_txd1>;
 		pinctrl-4 = <&emac_rgmii_txd2>;
 		pinctrl-5 = <&emac_rgmii_txd3>;
 		pinctrl-6 = <&emac_rgmii_txc>;
 		pinctrl-7 = <&emac_rgmii_tx_ctl>;
 		pinctrl-8 = <&emac_rgmii_rxd0>;
 		pinctrl-9 = <&emac_rgmii_rxd1>;
 		pinctrl-10 = <&emac_rgmii_rxd2>;
 		pinctrl-11 = <&emac_rgmii_rxd3>;
 		pinctrl-12 = <&emac_rgmii_rxc>;
 		pinctrl-13 = <&emac_rgmii_rx_ctl>;
 		pinctrl-14 = <&emac_phy_intr>;
 		pinctrl-15 = <&emac_phy_reset_state>;
 		pinctrl-16 = <&emac_pin_pps_0>;
 		pinctrl-17 = <&emac_rgmii_rxc_suspend>;
 		pinctrl-18 = <&emac_rgmii_rxc_resume>;

 		io-macro-info {
 			io-macro-bypass-mode = <0>;
 			io-interface = "rgmii";
 		};
 		emac_emb_smmu: emac_emb_smmu {
 			compatible = "qcom,emac-smmu-embedded";
 			iommus = <&apps_smmu 0x1C0 0x0>;
 			qcom,iova-mapping = <0x80000000 0x40000000>;
 		};
 	};

 };

 &ufsphy_mem {
 	compatible = "qcom,ufs-phy-qmp-v3-660";

 	vdda-phy-supply = <&pm6155_1_l5>; /* 0.9v */
 	vdda-pll-supply = <&pm6155_1_l12>;
 	vdda-phy-max-microamp = <30000>;
 	vdda-pll-max-microamp = <12000>;

 	status = "ok";
 };

 &ufshc_mem {
 	vdd-hba-supply = <&ufs_phy_gdsc>;
 	vdd-hba-fixed-regulator;
 	vcc-supply = <&pm6155_1_l17>;
 	vcc-voltage-level = <2950000 2960000>;
 	vccq2-supply = <&pm6155_1_s4>;
 	vcc-max-microamp = <800000>;
 	vccq2-max-microamp = <600000>;

 	qcom,vddp-ref-clk-supply = <&pm6155_1_l11>;
 	qcom,vddp-ref-clk-max-microamp = <100>;
 	qcom,vddp-ref-clk-min-uV = <1232000>;
 	qcom,vddp-ref-clk-max-uV = <1260000>;

 	status = "ok";
 };

 &sdhc_1 {
 	vdd-supply = <&pm6155_1_l17>;
 	qcom,vdd-voltage-level = <2950000 2950000>;
 	qcom,vdd-current-level = <0 570000>;

 	vdd-io-supply = <&pm6155_1_s4>;
 	qcom,vdd-io-always-on;
 	qcom,vdd-io-lpm-sup;
 	qcom,vdd-io-voltage-level = <1800000 1800000>;
 	qcom,vdd-io-current-level = <0 325000>;

 	pinctrl-names = "active", "sleep";
 	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
 	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;

 	qcom,restore-after-cx-collapse;
 	status = "ok";
 };

 &sdhc_2 {
 	vdd-supply = <&pm6155_1_l10>;
 	qcom,vdd-voltage-level = <2950000 2950000>;
 	qcom,vdd-current-level = <0 800000>;

 	vdd-io-supply = <&pm6155_1_l2>;
 	qcom,vdd-io-voltage-level = <1800000 3100000>;
 	qcom,vdd-io-current-level = <0 22000>;

 	pinctrl-names = "active", "sleep";
 	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;

 	cd-gpios = <&tlmm 99 1>;

 	qcom,restore-after-cx-collapse;
 	status = "ok";
 };

 &usb0 {
 	qcom,host-poweroff-in-pm-suspend;
 };

 &usb1 {
 	status = "ok";
 	qcom,default-mode-host;
 	qcom,host-poweroff-in-pm-suspend;
 };

 &qupv3_se0_2uart {
 	status = "ok";
 };

 &qupv3_se4_2uart {
 	status = "ok";
 };

 &qupv3_se7_4uart {
 	status = "ok";
 };
	/* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/
	#include <dt-bindings/gpio/gpio.h>
	#include <dt-bindings/clock/qcom,gcc-sm6150.h>
	#include "sa6155-cnss.dtsi"

	&bluetooth_ext {
	status = "ok";
	};

	&qupv3_se6_spi {
	status = "ok";
	can-controller@0 {
	compatible = "qcom,nxp,mpc5746c";
	reg = <0>;
	interrupt-parent = <&tlmm>;
	interrupts = <40 0>;
	spi-max-frequency = <5000000>;
	qcom,clk-freq-mhz = <40000000>;
	qcom,max-can-channels = <1>;
	qcom,bits-per-word = <8>;
	qcom,support-can-fd;
	};
	};

	&soc {
	qcom,lpass@62400000 {
	status = "ok";
	qcom,pil-force-shutdown;
	};

	qcom,glink {
	modem {
	status = "disabled";
	};
	};

	ss5_pwr_ctrl0 {
	compatible = "gnss_sirf";
	pinctrl-0 = <&ss5_pwr_ctrl_rst_on>;
	ssVreset-gpio = <&tlmm 87 1>;
	ssVonoff-gpio = <&tlmm 18 1>;
	};

	hsi2s: qcom,hsi2s {
	compatible = "qcom,sa6155-hsi2s", "qcom,hsi2s";
	number-of-interfaces = <2>;
	reg = <0x1B40000 0x28000>;
	reg-names = "lpa_if";
	interrupts = <GIC_SPI 267 0>;
	clocks = <&clock_gcc GCC_SDR_CORE_CLK>,
	<&clock_gcc GCC_SDR_WR0_MEM_CLK>,
	<&clock_gcc GCC_SDR_WR1_MEM_CLK>,
	<&clock_gcc GCC_SDR_WR2_MEM_CLK>,
	<&clock_gcc GCC_SDR_CSR_HCLK>;
	clock-names = "core_clk", "wr0_mem_clk",
	"wr1_mem_clk", "wr2_mem_clk",
	"csr_hclk";
	number-of-rate-detectors = <2>;
	rate-detector-interfaces = <0 1>;

	sdr0: qcom,hs0_i2s {
	compatible = "qcom,hsi2s-interface";
	minor-number = <0>;
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&hs0_i2s_sck_active &hs0_i2s_data0_active
	&hs0_i2s_data1_active>;
	pinctrl-1 = <&hs0_i2s_sck_sleep &hs0_i2s_data0_sleep
	&hs0_i2s_data1_sleep>;
	clocks = <&clock_gcc GCC_SDR_PRI_MI2S_CLK>;
	clock-names = "pri_mi2s_clk";
	iommus = <&apps_smmu 0x035C 0x0>;
	qcom,smmu-s1-bypass;
	qcom,iova-mapping = <0x0 0xFFFFFFFF>;
	bit-clock-hz = <12288000>;
	data-buffer-ms = <10>;
	bit-depth = <32>;
	spkr-channel-count = <2>;
	mic-channel-count = <2>;
	pcm-rate = <2>;
	pcm-sync-src = <0>;
	aux-mode = <0>;
	rpcm-width = <1>;
	tpcm-width = <1>;
	enable-tdm = <1>;
	tdm-rate = <32>;
	tdm-rpcm-width = <16>;
	tdm-tpcm-width = <16>;
	tdm-sync-delay = <2>;
	tdm-inv-sync = <0>;
	pcm-lane-config = <1>;
	};

	sdr1: qcom,hs1_i2s {
	compatible = "qcom,hsi2s-interface";
	minor-number = <1>;
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&hs1_i2s_sck_active &hs1_i2s_data0_active
	&hs1_i2s_data1_active>;
	pinctrl-1 = <&hs1_i2s_sck_sleep &hs1_i2s_data0_sleep
	&hs1_i2s_data1_sleep>;
	clocks = <&clock_gcc GCC_SDR_SEC_MI2S_CLK>;
	clock-names = "sec_mi2s_clk";
	iommus = <&apps_smmu 0x035D 0x0>;
	qcom,smmu-s1-bypass;
	qcom,iova-mapping = <0x0 0xFFFFFFFF>;
	bit-clock-hz = <12288000>;
	data-buffer-ms = <10>;
	bit-depth = <32>;
	spkr-channel-count = <2>;
	mic-channel-count = <2>;
	pcm-rate = <2>;
	pcm-sync-src = <0>;
	aux-mode = <0>;
	rpcm-width = <1>;
	tpcm-width = <1>;
	enable-tdm = <1>;
	tdm-rate = <32>;
	tdm-rpcm-width = <16>;
	tdm-tpcm-width = <16>;
	tdm-sync-delay = <2>;
	tdm-inv-sync = <0>;
	pcm-lane-config = <1>;
	};
	};

	emac_hw: qcom,emac@20000 {
	compatible = "qcom,emac-dwc-eqos";
	qcom,arm-smmu;
	reg = <0x20000 0x10000>,
	<0x36000 0x100>;
	reg-names = "emac-base", "rgmii-base";
	dma-bit-mask = <32>;
	emac-core-version = <7>;
	interrupts-extended = <&pdc 0 660 4>, <&pdc 0 661 4>,
	<&tlmm 121 2>, <&pdc 0 651 4>,
	<&pdc 0 652 4>, <&pdc 0 653 4>,
	<&pdc 0 654 4>, <&pdc 0 655 4>,
	<&pdc 0 656 4>, <&pdc 0 657 4>,
	<&pdc 0 658 4>, <&pdc 0 659 4>,
	<&pdc 0 668 4>, <&pdc 0 669 4>;
	interrupt-names = "sbd-intr", "lpi-intr",
	"phy-intr", "tx-ch0-intr",
	"tx-ch1-intr", "tx-ch2-intr",
	"tx-ch3-intr", "tx-ch4-intr",
	"rx-ch0-intr", "rx-ch1-intr",
	"rx-ch2-intr", "rx-ch3-intr",
	"ptp_pps_irq_0","ptp_pps_irq_1";
	qcom,msm-bus,name = "emac";
	qcom,msm-bus,num-cases = <4>;
	qcom,msm-bus,num-paths = <2>;
	qcom,msm-bus,vectors-KBps =
	<98 512 0 0>, <1 781 0 0>, /* No vote */
	<98 512 1250 0>, <1 781 0 40000>, /* 10Mbps vote */
	<98 512 12500 0>, <1 781 0 40000>, /* 100Mbps vote */
	<98 512 125000 0>, <1 781 0 40000>; /* 1000Mbps vote */
	qcom,bus-vector-names = "0", "10", "100", "1000";
	clocks = <&clock_gcc GCC_EMAC_AXI_CLK>,
	<&clock_gcc GCC_EMAC_PTP_CLK>,
	<&clock_gcc GCC_EMAC_RGMII_CLK>,
	<&clock_gcc GCC_EMAC_SLV_AHB_CLK>;
	clock-names = "eth_axi_clk", "eth_ptp_clk",
	"eth_rgmii_clk", "eth_slave_ahb_clk";
	qcom,phy-reset = <&tlmm 104 GPIO_ACTIVE_HIGH>;
	qcom,phy-intr-redirect = <&tlmm 121 GPIO_ACTIVE_LOW>;
	gdsc_emac-supply = <&emac_gdsc>;
	pinctrl-names = "dev-emac-mdc", "dev-emac-mdio",
	"dev-emac-rgmii_txd0_state", "dev-emac-rgmii_txd1_state",
	"dev-emac-rgmii_txd2_state", "dev-emac-rgmii_txd3_state",
	"dev-emac-rgmii_txc_state", "dev-emac-rgmii_tx_ctl_state",
	"dev-emac-rgmii_rxd0_state", "dev-emac-rgmii_rxd1_state",
	"dev-emac-rgmii_rxd2_state", "dev-emac-rgmii_rxd3_state",
	"dev-emac-rgmii_rxc_state", "dev-emac-rgmii_rx_ctl_state",
	"dev-emac-phy_intr", "dev-emac-phy_reset_state",
	"dev-emac_pin_pps_0", "dev-emac-rgmii_rxc_suspend_state",
	"dev-emac-rgmii_rxc_resume_state";

	pinctrl-0 = <&emac_mdc>;
	pinctrl-1 = <&emac_mdio>;
	pinctrl-2 = <&emac_rgmii_txd0>;
	pinctrl-3 = <&emac_rgmii_txd1>;
	pinctrl-4 = <&emac_rgmii_txd2>;
	pinctrl-5 = <&emac_rgmii_txd3>;
	pinctrl-6 = <&emac_rgmii_txc>;
	pinctrl-7 = <&emac_rgmii_tx_ctl>;
	pinctrl-8 = <&emac_rgmii_rxd0>;
	pinctrl-9 = <&emac_rgmii_rxd1>;
	pinctrl-10 = <&emac_rgmii_rxd2>;
	pinctrl-11 = <&emac_rgmii_rxd3>;
	pinctrl-12 = <&emac_rgmii_rxc>;
	pinctrl-13 = <&emac_rgmii_rx_ctl>;
	pinctrl-14 = <&emac_phy_intr>;
	pinctrl-15 = <&emac_phy_reset_state>;
	pinctrl-16 = <&emac_pin_pps_0>;
	pinctrl-17 = <&emac_rgmii_rxc_suspend>;
	pinctrl-18 = <&emac_rgmii_rxc_resume>;

	io-macro-info {
	io-macro-bypass-mode = <0>;
	io-interface = "rgmii";
	};
	emac_emb_smmu: emac_emb_smmu {
	compatible = "qcom,emac-smmu-embedded";
	iommus = <&apps_smmu 0x1C0 0x0>;
	qcom,iova-mapping = <0x80000000 0x40000000>;
	};
	};

	};

	&ufsphy_mem {
	compatible = "qcom,ufs-phy-qmp-v3-660";

	vdda-phy-supply = <&pm6155_1_l5>; /* 0.9v */
	vdda-pll-supply = <&pm6155_1_l12>;
	vdda-phy-max-microamp = <30000>;
	vdda-pll-max-microamp = <12000>;

	status = "ok";
	};

	&ufshc_mem {
	vdd-hba-supply = <&ufs_phy_gdsc>;
	vdd-hba-fixed-regulator;
	vcc-supply = <&pm6155_1_l17>;
	vcc-voltage-level = <2950000 2960000>;
	vccq2-supply = <&pm6155_1_s4>;
	vcc-max-microamp = <800000>;
	vccq2-max-microamp = <600000>;

	qcom,vddp-ref-clk-supply = <&pm6155_1_l11>;
	qcom,vddp-ref-clk-max-microamp = <100>;
	qcom,vddp-ref-clk-min-uV = <1232000>;
	qcom,vddp-ref-clk-max-uV = <1260000>;

	status = "ok";
	};

	&sdhc_1 {
	vdd-supply = <&pm6155_1_l17>;
	qcom,vdd-voltage-level = <2950000 2950000>;
	qcom,vdd-current-level = <0 570000>;

	vdd-io-supply = <&pm6155_1_s4>;
	qcom,vdd-io-always-on;
	qcom,vdd-io-lpm-sup;
	qcom,vdd-io-voltage-level = <1800000 1800000>;
	qcom,vdd-io-current-level = <0 325000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;

	qcom,restore-after-cx-collapse;
	status = "ok";
	};

	&sdhc_2 {
	vdd-supply = <&pm6155_1_l10>;
	qcom,vdd-voltage-level = <2950000 2950000>;
	qcom,vdd-current-level = <0 800000>;

	vdd-io-supply = <&pm6155_1_l2>;
	qcom,vdd-io-voltage-level = <1800000 3100000>;
	qcom,vdd-io-current-level = <0 22000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;

	cd-gpios = <&tlmm 99 1>;

	qcom,restore-after-cx-collapse;
	status = "ok";
	};

	&usb0 {
	qcom,host-poweroff-in-pm-suspend;
	};

	&usb1 {
	status = "ok";
	qcom,default-mode-host;
	qcom,host-poweroff-in-pm-suspend;
	};

	&qupv3_se0_2uart {
	status = "ok";
	};

	&qupv3_se4_2uart {
	status = "ok";
	};

	&qupv3_se7_4uart {
	status = "ok";
	};