| /* |
| * Copyright (c) 2019, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| /dts-v1/; |
| |
| #include "qcs407.dtsi" |
| #include "qcs405-csra8plus2-audio-overlay.dtsi" |
| #include "qcs405-geni-ir-overlay.dtsi" |
| #include "qcs405-linear-pca9956.dtsi" |
| |
| / { |
| model = "Qualcomm Technologies, Inc. QCS407 EVB1-4K-CSRA8 I2S-GROUPING"; |
| compatible = "qcom,qcs407-iot", "qcom,qcs407", "qcom,iot"; |
| qcom,board-id = <0x090020 0x1>; |
| }; |
| |
| &soc { |
| spi@78b5000 { |
| status = "ok"; |
| spi@0 { |
| compatible = "qcom,spi-msm-codec-slave"; |
| reg = <0>; |
| spi-max-frequency = <50000000>; |
| }; |
| }; |
| |
| gpio_keys { |
| /delete-property/ pinctrl-0; |
| /delete-node/ home; |
| }; |
| |
| usb3_extcon { |
| /delete-property/ id-gpio; |
| pinctrl-0 = <&usb3_vbus_det_default |
| &usb3_vbus_boost_default>; |
| }; |
| }; |
| |
| &sdhc_2 { |
| compatible = "qcom,sdhci-msm-v5"; |
| reg = <0x7844000 0x1000>; |
| reg-names = "hc_mem"; |
| |
| interrupts = <0 125 0>, <0 221 0>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| qcom,bus-width = <4>; |
| qcom,large-address-bus; |
| qcom,restore-after-cx-collapse; |
| |
| qcom,pm-qos-irq-type = "affine_irq"; |
| qcom,pm-qos-irq-latency = <13 651>; |
| |
| qcom,pm-qos-cpu-groups = <0x0f>; |
| qcom,pm-qos-legacy-latency-us = <13 651>; |
| |
| qcom,msm-bus,name = "sdhc2"; |
| qcom,msm-bus,num-cases = <8>; |
| qcom,msm-bus,num-paths = <1>; |
| qcom,msm-bus,vectors-KBps = <81 512 0 0>, /* No vote */ |
| <81 512 1046 3200>, /* 400 KB/s*/ |
| <81 512 52286 160000>, /* 20 MB/s */ |
| <81 512 65360 200000>, /* 25 MB/s */ |
| <81 512 130718 400000>, /* 50 MB/s */ |
| <81 512 261438 800000>, /* 100 MB/s */ |
| <81 512 261438 800000>, /* 200 MB/s */ |
| <81 512 1338562 4096000>; /* Max. bandwidth */ |
| qcom,bus-bw-vectors-bps = <0 400000 20000000 25000000 50000000 |
| 100000000 200000000 4294967295>; |
| |
| qcom,clk-rates = <400000 20000000 25000000 |
| 50000000 100000000>; |
| qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", |
| "SDR104"; |
| |
| qcom,devfreq,freq-table = <50000000 200000000>; |
| |
| clocks = <&clock_gcc GCC_SDCC2_AHB_CLK>, |
| <&clock_gcc GCC_SDCC2_APPS_CLK>; |
| clock-names = "iface_clk", "core_clk"; |
| |
| qcom,nonhotplug; |
| |
| /* VDD is an external regulator eLDO5 */ |
| vdd-io-supply = <&pms405_l6>; |
| qcom,vdd-io-voltage-level = <1800000 1800000>; |
| qcom,vdd-io-current-level = <0 24200>; |
| post-power-on-delay-ms = <100>; |
| |
| qcom,core_3_0v_support; |
| qcom,nonremovable; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; |
| pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; |
| |
| /delete-property/ qcom,devfreq,freq-table; |
| /delete-property/ cd-gpios; |
| |
| status = "ok"; |
| }; |
