arch/arm64/boot/dts/qcom/atoll-idp.dtsi - kernel/msm.git - Git at Google

 /* Copyright (c) 2019, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/iio/qcom,spmi-vadc.h>
 #include <dt-bindings/input/input.h>
 #include "atoll-camera-sensor-idp.dtsi"
 #include "atoll-sde-display.dtsi"
 #include "sdmmagpie-thermal-overlay.dtsi"

 &soc {
 	mtp_batterydata: qcom,battery-data {
 		qcom,batt-id-range-pct = <15>;
 		#include "qg-batterydata-alium-3600mah.dtsi"
 	};
 };

 &pm6150l_vadc {
 	pa_therm1 {
 		reg = <ADC_AMUX_THM3_PU2>;
 		label = "pa_therm1";
 		qcom,ratiometric;
 		qcom,hw-settle-time = <200>;
 		qcom,pre-scaling = <1 1>;
 	};
 };

 &pm6150l_adc_tm {
 	io-channels = <&pm6150l_vadc ADC_AMUX_THM1_PU2>,
 			<&pm6150l_vadc ADC_AMUX_THM2_PU2>,
 			<&pm6150l_vadc ADC_AMUX_THM3_PU2>,
 			<&pm6150l_vadc ADC_GPIO1_PU2>;

 	pa_therm1 {
 		reg = <ADC_AMUX_THM3_PU2>;
 		qcom,ratiometric;
 		qcom,hw-settle-time = <200>;
 	};
 };

 &usb0 {
 	extcon = <&pm6150_pdphy>, <&pm6150_charger>, <&eud>;
 };

 &usb_qmp_dp_phy {
 	extcon = <&pm6150_pdphy>;
 };

 &ufsphy_mem {
 	compatible = "qcom,ufs-phy-qmp-v3";

 	vdda-phy-supply = <&pm6150_l4>; /* 0.9v */
 	vdda-pll-supply = <&pm6150l_l3>; /* 1.2v */
 	vdda-phy-max-microamp = <62900>;
 	vdda-pll-max-microamp = <18300>;

 	status = "ok";
 };

 &ufshc_mem {
 	vdd-hba-supply = <&ufs_phy_gdsc>;
 	vdd-hba-fixed-regulator;
 	vcc-supply = <&pm6150_l19>;
 	vcc-voltage-level = <2960000 2960000>;
 	vcc-max-microamp = <600000>;
 	vccq2-supply = <&pm6150_l12>;
 	vccq2-voltage-level = <1750000 1950000>;
 	vccq2-max-microamp = <600000>;

 	qcom,vddp-ref-clk-supply = <&pm6150l_l3>; /* PX10 */
 	qcom,vddp-ref-clk-max-microamp = <100>;

 	status = "ok";
 };

 &sdhc_1 {
 	vdd-supply = <&pm6150_l19>;
 	qcom,vdd-voltage-level = <2960000 2960000>;
 	qcom,vdd-current-level = <0 570000>;

 	vdd-io-supply = <&pm6150_l12>;
 	qcom,vdd-io-always-on;
 	qcom,vdd-io-lpm-sup;
 	qcom,vdd-io-voltage-level = <1800000 1800000>;
 	qcom,vdd-io-current-level = <0 325000>;

 	pinctrl-names = "active", "sleep";
 	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
 	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;

 	status = "ok";
 };

 &sdhc_2 {
 	vdd-supply = <&pm6150l_l9>;
 	qcom,vdd-voltage-level = <2960000 2960000>;
 	qcom,vdd-current-level = <0 800000>;

 	vdd-io-supply = <&pm6150l_l6>;
 	qcom,vdd-io-voltage-level = <1800000 2950000>;
 	qcom,vdd-io-current-level = <0 22000>;

 	pinctrl-names = "active", "sleep";
 	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
 	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;

 	cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;

 	status = "ok";
 };

 &thermal_zones {
 	pa-therm1 {
 		polling-delay-passive = <0>;
 		polling-delay = <0>;
 		thermal-governor = "user_space";
 		thermal-sensors = <&pm6150l_adc_tm ADC_AMUX_THM3_PU2>;
 		wake-capable-sensor;
 		trips {
 			active-config0 {
 				temperature = <125000>;
 				hysteresis = <1000>;
 				type = "passive";
 			};
 		};
 	};

 	quiet-therm-step {
 		status = "disabled";
 	};
 };

 &pm6150a_amoled {
 	status = "ok";
 };

 &pm6150_qg {
 	qcom,battery-data = <&mtp_batterydata>;
 	qcom,qg-iterm-ma = <100>;
 	qcom,hold-soc-while-full;
 	qcom,linearize-soc;
 	qcom,cl-feedback-on;
 };

 &pm6150_charger {
 	io-channels = <&pm6150_vadc ADC_USB_IN_V_16>,
 		      <&pm6150_vadc ADC_USB_IN_I>,
 		      <&pm6150_vadc ADC_CHG_TEMP>,
 		      <&pm6150_vadc ADC_DIE_TEMP>,
 		      <&pm6150_vadc ADC_AMUX_THM3_PU2>,
 		      <&pm6150_vadc ADC_SBUx>,
 		      <&pm6150_vadc ADC_VPH_PWR>;
 	io-channel-names = "usb_in_voltage",
 			   "usb_in_current",
 			   "chg_temp",
 			   "die_temp",
 			   "conn_temp",
 			   "sbux_res",
 			   "vph_voltage";
 	qcom,battery-data = <&mtp_batterydata>;
 	qcom,auto-recharge-soc = <98>;
 	qcom,step-charging-enable;
 	qcom,sw-jeita-enable;
 	qcom,fcc-stepping-enable;
 	qcom,suspend-input-on-debug-batt;
 	qcom,sec-charger-config = <3>;
 	qcom,thermal-mitigation = <4200000 3500000 3000000
 			2500000 2000000 1500000 1000000 500000>;
 	dpdm-supply = <&qusb_phy0>;
 	qcom,charger-temp-max = <800>;
 	qcom,smb-temp-max = <800>;
 	qcom,fcc-step-delay-ms = <100>;
 	qcom,fcc-step-size-ua = <100000>;
 	qcom,disable-sw-thermal-regulation;
 	qcom,disable-fcc-restriction;
 	qcom,smb-internal-pull-kohm = <0>;
 };

 &pm6150l_gpios {
 	key_vol_up {
 		key_vol_up_default: key_vol_up_default {
 			pins = "gpio2";
 			function = "normal";
 			input-enable;
 			bias-pull-up;
 			power-source = <0>;
 		};
 	};
 };

 &soc {
 	gpio_keys {
 		compatible = "gpio-keys";
 		label = "gpio-keys";

 		pinctrl-names = "default";
 		pinctrl-0 = <&key_vol_up_default>;

 		vol_up {
 			label = "volume_up";
 			gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>;
 			linux,input-type = <1>;
 			linux,code = <KEY_VOLUMEUP>;
 			linux,can-disable;
 			debounce-interval = <15>;
 			gpio-key,wakeup;
 		};
 	};
 };

 &qupv3_se7_i2c {
 	status = "ok";

 	synaptics_tcm@20 {
 		compatible = "synaptics,tcm-i2c";
 		reg = <0x20>;
 		interrupt-parent = <&tlmm>;
 		interrupts = <9 0x2008>;
 		pinctrl-names = "pmx_ts_active","pmx_ts_suspend",
 			"pmx_ts_release";
 		pinctrl-0 = <&ts_active>;
 		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
 		pinctrl-2 = <&ts_release>;
 		vdd-supply = <&pm6150_l10>;
 		avdd-supply = <&pm6150l_l7>;
 		synaptics,pwr-reg-name = "avdd";
 		synaptics,bus-reg-name = "vdd";
 		synaptics,irq-gpio = <&tlmm 9 0x2008>;
 		synaptics,irq-on-state = <0>;
 		synaptics,reset-gpio = <&tlmm 8 0x00>;
 		synaptics,reset-on-state = <0>;
 		synaptics,reset-active-ms = <20>;
 		synaptics,reset-delay-ms = <200>;
 		synaptics,power-delay-ms = <200>;
 		synaptics,ubl-i2c-addr = <0x20>;
 	};
 };

 &dsi_rm69299_visionox_amoled_video {
 	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb_amoled>;
 	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
 	qcom,mdss-dsi-bl-min-level = <1>;
 	qcom,mdss-dsi-bl-max-level = <255>;
 	qcom,platform-te-gpio = <&tlmm 10 0>;
 	qcom,platform-reset-gpio = <&pm6150l_gpios 3 0>;
 };

 &dsi_rm69299_visionox_amoled_cmd {
 	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb_amoled>;
 	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
 	qcom,mdss-dsi-bl-min-level = <1>;
 	qcom,mdss-dsi-bl-max-level = <255>;
 	qcom,platform-te-gpio = <&tlmm 10 0>;
 	qcom,platform-reset-gpio = <&pm6150l_gpios 3 0>;
 };

 &qupv3_se0_i2c {
 	status = "ok";
 	qcom,clk-freq-out = <1000000>;
 	#address-cells = <1>;
 	#size-cells = <0>;
 	nq@28 {
 		compatible = "qcom,nq-nci";
 		reg = <0x28>;
 		qcom,nq-irq = <&tlmm 37 0x00>;
 		qcom,nq-ven = <&tlmm 12 0x00>;
 		qcom,nq-firm = <&tlmm 36 0x00>;
 		qcom,nq-clkreq = <&tlmm 31 0x00>;
 		interrupt-parent = <&tlmm>;
 		interrupts = <37 0>;
 		interrupt-names = "nfc_irq";
 		pinctrl-names = "nfc_active", "nfc_suspend";
 		pinctrl-0 = <&nfc_int_active &nfc_enable_active
 				&nfc_clk_req_active>;
 		pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend
 				&nfc_clk_req_suspend>;
 	};
 };

 &sde_dp{
 	qcom,dp-aux-switch = <&fsa4480>;
 };
	/* Copyright (c) 2019, The Linux Foundation. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <dt-bindings/gpio/gpio.h>
	#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
	#include <dt-bindings/iio/qcom,spmi-vadc.h>
	#include <dt-bindings/input/input.h>
	#include "atoll-camera-sensor-idp.dtsi"
	#include "atoll-sde-display.dtsi"
	#include "sdmmagpie-thermal-overlay.dtsi"

	&soc {
	mtp_batterydata: qcom,battery-data {
	qcom,batt-id-range-pct = <15>;
	#include "qg-batterydata-alium-3600mah.dtsi"
	};
	};

	&pm6150l_vadc {
	pa_therm1 {
	reg = <ADC_AMUX_THM3_PU2>;
	label = "pa_therm1";
	qcom,ratiometric;
	qcom,hw-settle-time = <200>;
	qcom,pre-scaling = <1 1>;
	};
	};

	&pm6150l_adc_tm {
	io-channels = <&pm6150l_vadc ADC_AMUX_THM1_PU2>,
	<&pm6150l_vadc ADC_AMUX_THM2_PU2>,
	<&pm6150l_vadc ADC_AMUX_THM3_PU2>,
	<&pm6150l_vadc ADC_GPIO1_PU2>;

	pa_therm1 {
	reg = <ADC_AMUX_THM3_PU2>;
	qcom,ratiometric;
	qcom,hw-settle-time = <200>;
	};
	};

	&usb0 {
	extcon = <&pm6150_pdphy>, <&pm6150_charger>, <&eud>;
	};

	&usb_qmp_dp_phy {
	extcon = <&pm6150_pdphy>;
	};

	&ufsphy_mem {
	compatible = "qcom,ufs-phy-qmp-v3";

	vdda-phy-supply = <&pm6150_l4>; /* 0.9v */
	vdda-pll-supply = <&pm6150l_l3>; /* 1.2v */
	vdda-phy-max-microamp = <62900>;
	vdda-pll-max-microamp = <18300>;

	status = "ok";
	};

	&ufshc_mem {
	vdd-hba-supply = <&ufs_phy_gdsc>;
	vdd-hba-fixed-regulator;
	vcc-supply = <&pm6150_l19>;
	vcc-voltage-level = <2960000 2960000>;
	vcc-max-microamp = <600000>;
	vccq2-supply = <&pm6150_l12>;
	vccq2-voltage-level = <1750000 1950000>;
	vccq2-max-microamp = <600000>;

	qcom,vddp-ref-clk-supply = <&pm6150l_l3>; /* PX10 */
	qcom,vddp-ref-clk-max-microamp = <100>;

	status = "ok";
	};

	&sdhc_1 {
	vdd-supply = <&pm6150_l19>;
	qcom,vdd-voltage-level = <2960000 2960000>;
	qcom,vdd-current-level = <0 570000>;

	vdd-io-supply = <&pm6150_l12>;
	qcom,vdd-io-always-on;
	qcom,vdd-io-lpm-sup;
	qcom,vdd-io-voltage-level = <1800000 1800000>;
	qcom,vdd-io-current-level = <0 325000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;

	status = "ok";
	};

	&sdhc_2 {
	vdd-supply = <&pm6150l_l9>;
	qcom,vdd-voltage-level = <2960000 2960000>;
	qcom,vdd-current-level = <0 800000>;

	vdd-io-supply = <&pm6150l_l6>;
	qcom,vdd-io-voltage-level = <1800000 2950000>;
	qcom,vdd-io-current-level = <0 22000>;

	pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;

	cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;

	status = "ok";
	};

	&thermal_zones {
	pa-therm1 {
	polling-delay-passive = <0>;
	polling-delay = <0>;
	thermal-governor = "user_space";
	thermal-sensors = <&pm6150l_adc_tm ADC_AMUX_THM3_PU2>;
	wake-capable-sensor;
	trips {
	active-config0 {
	temperature = <125000>;
	hysteresis = <1000>;
	type = "passive";
	};
	};
	};

	quiet-therm-step {
	status = "disabled";
	};
	};

	&pm6150a_amoled {
	status = "ok";
	};

	&pm6150_qg {
	qcom,battery-data = <&mtp_batterydata>;
	qcom,qg-iterm-ma = <100>;
	qcom,hold-soc-while-full;
	qcom,linearize-soc;
	qcom,cl-feedback-on;
	};

	&pm6150_charger {
	io-channels = <&pm6150_vadc ADC_USB_IN_V_16>,
	<&pm6150_vadc ADC_USB_IN_I>,
	<&pm6150_vadc ADC_CHG_TEMP>,
	<&pm6150_vadc ADC_DIE_TEMP>,
	<&pm6150_vadc ADC_AMUX_THM3_PU2>,
	<&pm6150_vadc ADC_SBUx>,
	<&pm6150_vadc ADC_VPH_PWR>;
	io-channel-names = "usb_in_voltage",
	"usb_in_current",
	"chg_temp",
	"die_temp",
	"conn_temp",
	"sbux_res",
	"vph_voltage";
	qcom,battery-data = <&mtp_batterydata>;
	qcom,auto-recharge-soc = <98>;
	qcom,step-charging-enable;
	qcom,sw-jeita-enable;
	qcom,fcc-stepping-enable;
	qcom,suspend-input-on-debug-batt;
	qcom,sec-charger-config = <3>;
	qcom,thermal-mitigation = <4200000 3500000 3000000
	2500000 2000000 1500000 1000000 500000>;
	dpdm-supply = <&qusb_phy0>;
	qcom,charger-temp-max = <800>;
	qcom,smb-temp-max = <800>;
	qcom,fcc-step-delay-ms = <100>;
	qcom,fcc-step-size-ua = <100000>;
	qcom,disable-sw-thermal-regulation;
	qcom,disable-fcc-restriction;
	qcom,smb-internal-pull-kohm = <0>;
	};

	&pm6150l_gpios {
	key_vol_up {
	key_vol_up_default: key_vol_up_default {
	pins = "gpio2";
	function = "normal";
	input-enable;
	bias-pull-up;
	power-source = <0>;
	};
	};
	};

	&soc {
	gpio_keys {
	compatible = "gpio-keys";
	label = "gpio-keys";

	pinctrl-names = "default";
	pinctrl-0 = <&key_vol_up_default>;

	vol_up {
	label = "volume_up";
	gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>;
	linux,input-type = <1>;
	linux,code = <KEY_VOLUMEUP>;
	linux,can-disable;
	debounce-interval = <15>;
	gpio-key,wakeup;
	};
	};
	};

	&qupv3_se7_i2c {
	status = "ok";

	synaptics_tcm@20 {
	compatible = "synaptics,tcm-i2c";
	reg = <0x20>;
	interrupt-parent = <&tlmm>;
	interrupts = <9 0x2008>;
	pinctrl-names = "pmx_ts_active","pmx_ts_suspend",
	"pmx_ts_release";
	pinctrl-0 = <&ts_active>;
	pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
	pinctrl-2 = <&ts_release>;
	vdd-supply = <&pm6150_l10>;
	avdd-supply = <&pm6150l_l7>;
	synaptics,pwr-reg-name = "avdd";
	synaptics,bus-reg-name = "vdd";
	synaptics,irq-gpio = <&tlmm 9 0x2008>;
	synaptics,irq-on-state = <0>;
	synaptics,reset-gpio = <&tlmm 8 0x00>;
	synaptics,reset-on-state = <0>;
	synaptics,reset-active-ms = <20>;
	synaptics,reset-delay-ms = <200>;
	synaptics,power-delay-ms = <200>;
	synaptics,ubl-i2c-addr = <0x20>;
	};
	};

	&dsi_rm69299_visionox_amoled_video {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb_amoled>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <255>;
	qcom,platform-te-gpio = <&tlmm 10 0>;
	qcom,platform-reset-gpio = <&pm6150l_gpios 3 0>;
	};

	&dsi_rm69299_visionox_amoled_cmd {
	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb_amoled>;
	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
	qcom,mdss-dsi-bl-min-level = <1>;
	qcom,mdss-dsi-bl-max-level = <255>;
	qcom,platform-te-gpio = <&tlmm 10 0>;
	qcom,platform-reset-gpio = <&pm6150l_gpios 3 0>;
	};

	&qupv3_se0_i2c {
	status = "ok";
	qcom,clk-freq-out = <1000000>;
	#address-cells = <1>;
	#size-cells = <0>;
	nq@28 {
	compatible = "qcom,nq-nci";
	reg = <0x28>;
	qcom,nq-irq = <&tlmm 37 0x00>;
	qcom,nq-ven = <&tlmm 12 0x00>;
	qcom,nq-firm = <&tlmm 36 0x00>;
	qcom,nq-clkreq = <&tlmm 31 0x00>;
	interrupt-parent = <&tlmm>;
	interrupts = <37 0>;
	interrupt-names = "nfc_irq";
	pinctrl-names = "nfc_active", "nfc_suspend";
	pinctrl-0 = <&nfc_int_active &nfc_enable_active
	&nfc_clk_req_active>;
	pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend
	&nfc_clk_req_suspend>;
	};
	};

	&sde_dp{
	qcom,dp-aux-switch = <&fsa4480>;
	};