| /* |
| * Copyright (c) 2019 The Linux Foundation. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| // |
| // DO NOT EDIT! This file is automatically generated |
| // These definitions are tied to a particular hardware layout |
| |
| |
| #ifndef _REO_ENTRANCE_RING_H_ |
| #define _REO_ENTRANCE_RING_H_ |
| #if !defined(__ASSEMBLER__) |
| #endif |
| |
| #include "rx_mpdu_details.h" |
| |
| // ################ START SUMMARY ################# |
| // |
| // Dword Fields |
| // 0-3 struct rx_mpdu_details reo_level_mpdu_frame_info; |
| // 4 rx_reo_queue_desc_addr_31_0[31:0] |
| // 5 rx_reo_queue_desc_addr_39_32[7:0], rounded_mpdu_byte_count[21:8], reo_destination_indication[26:22], frameless_bar[27], reserved_5a[31:28] |
| // 6 rxdma_push_reason[1:0], rxdma_error_code[6:2], mpdu_fragment_number[10:7], sw_exception[11], sw_exception_mpdu_delink[12], sw_exception_destination_ring_valid[13], sw_exception_destination_ring[18:14], reserved_6a[31:19] |
| // 7 reserved_7a[19:0], ring_id[27:20], looping_count[31:28] |
| // |
| // ################ END SUMMARY ################# |
| |
| #define NUM_OF_DWORDS_REO_ENTRANCE_RING 8 |
| |
| struct reo_entrance_ring { |
| struct rx_mpdu_details reo_level_mpdu_frame_info; |
| uint32_t rx_reo_queue_desc_addr_31_0 : 32; //[31:0] |
| uint32_t rx_reo_queue_desc_addr_39_32 : 8, //[7:0] |
| rounded_mpdu_byte_count : 14, //[21:8] |
| reo_destination_indication : 5, //[26:22] |
| frameless_bar : 1, //[27] |
| reserved_5a : 4; //[31:28] |
| uint32_t rxdma_push_reason : 2, //[1:0] |
| rxdma_error_code : 5, //[6:2] |
| mpdu_fragment_number : 4, //[10:7] |
| sw_exception : 1, //[11] |
| sw_exception_mpdu_delink : 1, //[12] |
| sw_exception_destination_ring_valid: 1, //[13] |
| sw_exception_destination_ring : 5, //[18:14] |
| reserved_6a : 13; //[31:19] |
| uint32_t reserved_7a : 20, //[19:0] |
| ring_id : 8, //[27:20] |
| looping_count : 4; //[31:28] |
| }; |
| |
| /* |
| |
| struct rx_mpdu_details reo_level_mpdu_frame_info |
| |
| Consumer: REO |
| |
| Producer: RXDMA |
| |
| |
| |
| Details related to the MPDU being pushed into the REO |
| |
| rx_reo_queue_desc_addr_31_0 |
| |
| Consumer: REO |
| |
| Producer: RXDMA |
| |
| |
| |
| Address (lower 32 bits) of the REO queue descriptor. |
| |
| <legal all> |
| |
| rx_reo_queue_desc_addr_39_32 |
| |
| Consumer: REO |
| |
| Producer: RXDMA |
| |
| |
| |
| Address (upper 8 bits) of the REO queue descriptor. |
| |
| <legal all> |
| |
| rounded_mpdu_byte_count |
| |
| An approximation of the number of bytes received in this |
| MPDU. |
| |
| Used to keeps stats on the amount of data flowing |
| through a queue. |
| |
| <legal all> |
| |
| reo_destination_indication |
| |
| RXDMA copy the MPDU's first MSDU's destination |
| indication field here. This is used for REO to be able to |
| re-route the packet to a different SW destination ring if |
| the packet is detected as error in REO. |
| |
| |
| |
| The ID of the REO exit ring where the MSDU frame shall |
| push after (MPDU level) reordering has finished. |
| |
| |
| |
| <enum 0 reo_destination_tcl> Reo will push the frame |
| into the REO2TCL ring |
| |
| <enum 1 reo_destination_sw1> Reo will push the frame |
| into the REO2SW1 ring |
| |
| <enum 2 reo_destination_sw2> Reo will push the frame |
| into the REO2SW2 ring |
| |
| <enum 3 reo_destination_sw3> Reo will push the frame |
| into the REO2SW3 ring |
| |
| <enum 4 reo_destination_sw4> Reo will push the frame |
| into the REO2SW4 ring |
| |
| <enum 5 reo_destination_release> Reo will push the frame |
| into the REO_release ring |
| |
| <enum 6 reo_destination_fw> Reo will push the frame into |
| the REO2FW ring |
| |
| <enum 7 reo_destination_sw5> Reo will push the frame |
| into the REO2SW5 ring |
| |
| <enum 8 reo_destination_sw6> Reo will push the frame |
| into the REO2SW6 ring |
| |
| <enum 9 reo_destination_9> REO remaps this <enum 10 |
| reo_destination_10> REO remaps this |
| |
| <enum 11 reo_destination_11> REO remaps this |
| |
| <enum 12 reo_destination_12> REO remaps this <enum 13 |
| reo_destination_13> REO remaps this |
| |
| <enum 14 reo_destination_14> REO remaps this |
| |
| <enum 15 reo_destination_15> REO remaps this |
| |
| <enum 16 reo_destination_16> REO remaps this |
| |
| <enum 17 reo_destination_17> REO remaps this |
| |
| <enum 18 reo_destination_18> REO remaps this |
| |
| <enum 19 reo_destination_19> REO remaps this |
| |
| <enum 20 reo_destination_20> REO remaps this |
| |
| <enum 21 reo_destination_21> REO remaps this |
| |
| <enum 22 reo_destination_22> REO remaps this |
| |
| <enum 23 reo_destination_23> REO remaps this |
| |
| <enum 24 reo_destination_24> REO remaps this |
| |
| <enum 25 reo_destination_25> REO remaps this |
| |
| <enum 26 reo_destination_26> REO remaps this |
| |
| <enum 27 reo_destination_27> REO remaps this |
| |
| <enum 28 reo_destination_28> REO remaps this |
| |
| <enum 29 reo_destination_29> REO remaps this |
| |
| <enum 30 reo_destination_30> REO remaps this |
| |
| <enum 31 reo_destination_31> REO remaps this |
| |
| |
| |
| <legal all> |
| |
| frameless_bar |
| |
| When set, this REO entrance ring struct contains BAR |
| info from a multi TID BAR frame. The original multi TID BAR |
| frame itself contained all the REO info for the first TID, |
| but all the subsequent TID info and their linkage to the REO |
| descriptors is passed down as 'frameless' BAR info. |
| |
| |
| |
| The only fields valid in this descriptor when this bit |
| is set are: |
| |
| Rx_reo_queue_desc_addr_31_0 |
| |
| RX_reo_queue_desc_addr_39_32 |
| |
| |
| |
| And within the |
| |
| Reo_level_mpdu_frame_info: |
| |
| Within Rx_mpdu_desc_info_details: |
| |
| Mpdu_Sequence_number |
| |
| BAR_frame |
| |
| Peer_meta_data |
| |
| All other fields shall be set to 0 |
| |
| |
| |
| <legal all> |
| |
| reserved_5a |
| |
| <legal 0> |
| |
| rxdma_push_reason |
| |
| Indicates why rxdma pushed the frame to this ring |
| |
| |
| |
| This field is ignored by REO. |
| |
| |
| |
| <enum 0 rxdma_error_detected> RXDMA detected an error an |
| pushed this frame to this queue |
| |
| <enum 1 rxdma_routing_instruction> RXDMA pushed the |
| frame to this queue per received routing instructions. No |
| error within RXDMA was detected |
| |
| <enum 2 rxdma_rx_flush> RXDMA received an RX_FLUSH. As a |
| result the MSDU link descriptor might not have the |
| last_msdu_in_mpdu_flag set, but instead WBM might just see a |
| NULL pointer in the MSDU link descriptor. This is to be |
| considered a normal condition for this scenario. |
| |
| |
| |
| <legal 0 - 2> |
| |
| rxdma_error_code |
| |
| Field only valid when 'rxdma_push_reason' set to |
| 'rxdma_error_detected'. |
| |
| |
| |
| This field is ignored by REO. |
| |
| |
| |
| <enum 0 rxdma_overflow_err>MPDU frame is not complete |
| due to a FIFO overflow error in RXPCU. |
| |
| <enum 1 rxdma_mpdu_length_err>MPDU frame is not complete |
| due to receiving incomplete MPDU from the PHY |
| |
| |
| <enum 3 rxdma_decrypt_err>CRYPTO reported a decryption |
| error or CRYPTO received an encrypted frame, but did not get |
| a valid corresponding key id in the peer entry. |
| |
| <enum 4 rxdma_tkip_mic_err>CRYPTO reported a TKIP MIC |
| error |
| |
| <enum 5 rxdma_unecrypted_err>CRYPTO reported an |
| unencrypted frame error when encrypted was expected |
| |
| <enum 6 rxdma_msdu_len_err>RX OLE reported an MSDU |
| length error |
| |
| <enum 7 rxdma_msdu_limit_err>RX OLE reported that max |
| number of MSDUs allowed in an MPDU got exceeded |
| |
| <enum 8 rxdma_wifi_parse_err>RX OLE reported a parsing |
| error |
| |
| <enum 9 rxdma_amsdu_parse_err>RX OLE reported an A-MSDU |
| parsing error |
| |
| <enum 10 rxdma_sa_timeout_err>RX OLE reported a timeout |
| during SA search |
| |
| <enum 11 rxdma_da_timeout_err>RX OLE reported a timeout |
| during DA search |
| |
| <enum 12 rxdma_flow_timeout_err>RX OLE reported a |
| timeout during flow search |
| |
| <enum 13 rxdma_flush_request>RXDMA received a flush |
| request |
| |
| <enum 14 rxdma_amsdu_fragment_err>Rx PCU reported A-MSDU |
| present as well as a fragmented MPDU. A-MSDU defragmentation |
| is not supported in Lithium SW so this is treated as an |
| error. |
| |
| mpdu_fragment_number |
| |
| Field only valid when Reo_level_mpdu_frame_info. |
| Rx_mpdu_desc_info_details.Fragment_flag is set. |
| |
| |
| |
| The fragment number from the 802.11 header. |
| |
| |
| |
| Note that the sequence number is embedded in the field: |
| Reo_level_mpdu_frame_info. Rx_mpdu_desc_info_details. |
| Mpdu_sequence_number |
| |
| |
| |
| <legal all> |
| |
| sw_exception |
| |
| When not set, REO is performing all its default MPDU |
| processing operations, |
| |
| When set, this REO entrance descriptor is generated by |
| FW, and should be processed as an exception. This implies: |
| |
| NO re-order function is needed. |
| |
| MPDU delinking is determined by the setting of field |
| SW_excection_mpdu_delink |
| |
| Destination ring selection is based on the setting of |
| the field SW_exception_destination_ring_valid |
| |
| In the destination ring descriptor set bit: |
| SW_exception_entry |
| |
| Feature supported only in HastingsPrime |
| |
| <legal all> |
| |
| sw_exception_mpdu_delink |
| |
| Field only valid when SW_exception is set. |
| |
| 1'b0: REO should NOT delink the MPDU, and thus pass this |
| MPDU on to the destination ring as is. This implies that in |
| the REO_DESTINATION_RING struct field |
| Buf_or_link_desc_addr_info should point to an MSDU link |
| descriptor |
| |
| 1'b1: REO should perform the normal MPDU delink into |
| MSDU operations. |
| |
| Feature supported only in HastingsPrime |
| |
| <legal all> |
| |
| sw_exception_destination_ring_valid |
| |
| Field only valid when SW_exception is set. |
| |
| 1'b0: REO shall push the MPDU (or delinked MPDU based on |
| the setting of SW_exception_mpdu_delink) to the destination |
| ring according to field reo_destination_indication. |
| |
| 1'b1: REO shall push the MPDU (or delinked MPDU based on |
| the setting of SW_exception_mpdu_delink) to the destination |
| ring according to field SW_exception_destination_ring. |
| |
| Feature supported only in HastingsPrime |
| |
| <legal all> |
| |
| sw_exception_destination_ring |
| |
| Field only valid when fields SW_exception and |
| SW_exception_destination_ring_valid are set. |
| |
| The ID of the ring where REO shall push this frame. |
| |
| <enum 0 reo_destination_tcl> Reo will push the frame |
| into the REO2TCL ring |
| |
| <enum 1 reo_destination_sw1> Reo will push the frame |
| into the REO2SW1 ring |
| |
| <enum 2 reo_destination_sw2> Reo will push the frame |
| into the REO2SW1 ring |
| |
| <enum 3 reo_destination_sw3> Reo will push the frame |
| into the REO2SW1 ring |
| |
| <enum 4 reo_destination_sw4> Reo will push the frame |
| into the REO2SW1 ring |
| |
| <enum 5 reo_destination_release> Reo will push the frame |
| into the REO_release ring |
| |
| <enum 6 reo_destination_fw> Reo will push the frame into |
| the REO2FW ring |
| |
| <enum 7 reo_destination_sw5> REO remaps this |
| |
| <enum 8 reo_destination_sw6> REO remaps this |
| |
| <enum 9 reo_destination_9> REO remaps this |
| |
| <enum 10 reo_destination_10> REO remaps this |
| |
| <enum 11 reo_destination_11> REO remaps this |
| |
| <enum 12 reo_destination_12> REO remaps this <enum 13 |
| reo_destination_13> REO remaps this |
| |
| <enum 14 reo_destination_14> REO remaps this |
| |
| <enum 15 reo_destination_15> REO remaps this |
| |
| <enum 16 reo_destination_16> REO remaps this |
| |
| <enum 17 reo_destination_17> REO remaps this |
| |
| <enum 18 reo_destination_18> REO remaps this |
| |
| <enum 19 reo_destination_19> REO remaps this |
| |
| <enum 20 reo_destination_20> REO remaps this |
| |
| <enum 21 reo_destination_21> REO remaps this |
| |
| <enum 22 reo_destination_22> REO remaps this |
| |
| <enum 23 reo_destination_23> REO remaps this |
| |
| <enum 24 reo_destination_24> REO remaps this |
| |
| <enum 25 reo_destination_25> REO remaps this |
| |
| <enum 26 reo_destination_26> REO remaps this |
| |
| <enum 27 reo_destination_27> REO remaps this |
| |
| <enum 28 reo_destination_28> REO remaps this |
| |
| <enum 29 reo_destination_29> REO remaps this |
| |
| <enum 30 reo_destination_30> REO remaps this |
| |
| <enum 31 reo_destination_31> REO remaps this |
| |
| |
| |
| Feature supported only in HastingsPrime |
| |
| <legal all> |
| |
| reserved_6a |
| |
| <legal 0> |
| |
| reserved_7a |
| |
| <legal 0> |
| |
| ring_id |
| |
| Consumer: SW/REO/DEBUG |
| |
| Producer: SRNG (of RXDMA) |
| |
| |
| |
| For debugging. |
| |
| This field is filled in by the SRNG module. |
| |
| It help to identify the ring that is being looked <legal |
| all> |
| |
| looping_count |
| |
| Consumer: SW/REO/DEBUG |
| |
| Producer: SRNG (of RXDMA) |
| |
| |
| |
| For debugging. |
| |
| This field is filled in by the SRNG module. |
| |
| |
| |
| A count value that indicates the number of times the |
| producer of entries into this Ring has looped around the |
| ring. |
| |
| At initialization time, this value is set to 0. On the |
| first loop, this value is set to 1. After the max value is |
| reached allowed by the number of bits for this field, the |
| count value continues with 0 again. |
| |
| |
| |
| In case SW is the consumer of the ring entries, it can |
| use this field to figure out up to where the producer of |
| entries has created new entries. This eliminates the need to |
| check where the head pointer' of the ring is located once |
| the SW starts processing an interrupt indicating that new |
| entries have been put into this ring... |
| |
| |
| |
| Also note that SW if it wants only needs to look at the |
| LSB bit of this count value. |
| |
| <legal all> |
| */ |
| |
| |
| /* EXTERNAL REFERENCE : struct rx_mpdu_details reo_level_mpdu_frame_info */ |
| |
| |
| /* EXTERNAL REFERENCE : struct buffer_addr_info msdu_link_desc_addr_info */ |
| |
| |
| /* Description REO_ENTRANCE_RING_0_REO_LEVEL_MPDU_FRAME_INFO_MSDU_LINK_DESC_ADDR_INFO_BUFFER_ADDR_31_0 |
| |
| Address (lower 32 bits) of the MSDU buffer OR |
| MSDU_EXTENSION descriptor OR Link Descriptor |
| |
| |
| |
| In case of 'NULL' pointer, this field is set to 0 |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_0_REO_LEVEL_MPDU_FRAME_INFO_MSDU_LINK_DESC_ADDR_INFO_BUFFER_ADDR_31_0_OFFSET 0x00000000 |
| #define REO_ENTRANCE_RING_0_REO_LEVEL_MPDU_FRAME_INFO_MSDU_LINK_DESC_ADDR_INFO_BUFFER_ADDR_31_0_LSB 0 |
| #define REO_ENTRANCE_RING_0_REO_LEVEL_MPDU_FRAME_INFO_MSDU_LINK_DESC_ADDR_INFO_BUFFER_ADDR_31_0_MASK 0xffffffff |
| |
| /* Description REO_ENTRANCE_RING_1_REO_LEVEL_MPDU_FRAME_INFO_MSDU_LINK_DESC_ADDR_INFO_BUFFER_ADDR_39_32 |
| |
| Address (upper 8 bits) of the MSDU buffer OR |
| MSDU_EXTENSION descriptor OR Link Descriptor |
| |
| |
| |
| In case of 'NULL' pointer, this field is set to 0 |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_1_REO_LEVEL_MPDU_FRAME_INFO_MSDU_LINK_DESC_ADDR_INFO_BUFFER_ADDR_39_32_OFFSET 0x00000004 |
| #define REO_ENTRANCE_RING_1_REO_LEVEL_MPDU_FRAME_INFO_MSDU_LINK_DESC_ADDR_INFO_BUFFER_ADDR_39_32_LSB 0 |
| #define REO_ENTRANCE_RING_1_REO_LEVEL_MPDU_FRAME_INFO_MSDU_LINK_DESC_ADDR_INFO_BUFFER_ADDR_39_32_MASK 0x000000ff |
| |
| /* Description REO_ENTRANCE_RING_1_REO_LEVEL_MPDU_FRAME_INFO_MSDU_LINK_DESC_ADDR_INFO_RETURN_BUFFER_MANAGER |
| |
| Consumer: WBM |
| |
| Producer: SW/FW |
| |
| |
| |
| In case of 'NULL' pointer, this field is set to 0 |
| |
| |
| |
| Indicates to which buffer manager the buffer OR |
| MSDU_EXTENSION descriptor OR link descriptor that is being |
| pointed to shall be returned after the frame has been |
| processed. It is used by WBM for routing purposes. |
| |
| |
| |
| <enum 0 WBM_IDLE_BUF_LIST> This buffer shall be returned |
| to the WMB buffer idle list |
| |
| <enum 1 WBM_IDLE_DESC_LIST> This buffer shall be |
| returned to the WMB idle link descriptor idle list |
| |
| <enum 2 FW_BM> This buffer shall be returned to the FW |
| |
| <enum 3 SW0_BM> This buffer shall be returned to the SW, |
| ring 0 |
| |
| <enum 4 SW1_BM> This buffer shall be returned to the SW, |
| ring 1 |
| |
| <enum 5 SW2_BM> This buffer shall be returned to the SW, |
| ring 2 |
| |
| <enum 6 SW3_BM> This buffer shall be returned to the SW, |
| ring 3 |
| |
| <enum 7 SW4_BM> This buffer shall be returned to the SW, |
| ring 4 |
| |
| |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_1_REO_LEVEL_MPDU_FRAME_INFO_MSDU_LINK_DESC_ADDR_INFO_RETURN_BUFFER_MANAGER_OFFSET 0x00000004 |
| #define REO_ENTRANCE_RING_1_REO_LEVEL_MPDU_FRAME_INFO_MSDU_LINK_DESC_ADDR_INFO_RETURN_BUFFER_MANAGER_LSB 8 |
| #define REO_ENTRANCE_RING_1_REO_LEVEL_MPDU_FRAME_INFO_MSDU_LINK_DESC_ADDR_INFO_RETURN_BUFFER_MANAGER_MASK 0x00000700 |
| |
| /* Description REO_ENTRANCE_RING_1_REO_LEVEL_MPDU_FRAME_INFO_MSDU_LINK_DESC_ADDR_INFO_SW_BUFFER_COOKIE |
| |
| Cookie field exclusively used by SW. |
| |
| |
| |
| In case of 'NULL' pointer, this field is set to 0 |
| |
| |
| |
| HW ignores the contents, accept that it passes the |
| programmed value on to other descriptors together with the |
| physical address |
| |
| |
| |
| Field can be used by SW to for example associate the |
| buffers physical address with the virtual address |
| |
| The bit definitions as used by SW are within SW HLD |
| specification |
| |
| |
| |
| NOTE: |
| |
| The three most significant bits can have a special |
| meaning in case this struct is embedded in a TX_MPDU_DETAILS |
| STRUCT, and field transmit_bw_restriction is set |
| |
| |
| |
| In case of NON punctured transmission: |
| |
| Sw_buffer_cookie[20:19] = 2'b00: 20 MHz TX only |
| |
| Sw_buffer_cookie[20:19] = 2'b01: 40 MHz TX only |
| |
| Sw_buffer_cookie[20:19] = 2'b10: 80 MHz TX only |
| |
| Sw_buffer_cookie[20:19] = 2'b11: 160 MHz TX only |
| |
| |
| |
| In case of punctured transmission: |
| |
| Sw_buffer_cookie[20:18] = 3'b000: pattern 0 only |
| |
| Sw_buffer_cookie[20:18] = 3'b001: pattern 1 only |
| |
| Sw_buffer_cookie[20:18] = 3'b010: pattern 2 only |
| |
| Sw_buffer_cookie[20:18] = 3'b011: pattern 3 only |
| |
| Sw_buffer_cookie[20:18] = 3'b100: pattern 4 only |
| |
| Sw_buffer_cookie[20:18] = 3'b101: pattern 5 only |
| |
| Sw_buffer_cookie[20:18] = 3'b110: pattern 6 only |
| |
| Sw_buffer_cookie[20:18] = 3'b111: pattern 7 only |
| |
| |
| |
| Note: a punctured transmission is indicated by the |
| presence of TLV TX_PUNCTURE_SETUP embedded in the scheduler |
| TLV |
| |
| |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_1_REO_LEVEL_MPDU_FRAME_INFO_MSDU_LINK_DESC_ADDR_INFO_SW_BUFFER_COOKIE_OFFSET 0x00000004 |
| #define REO_ENTRANCE_RING_1_REO_LEVEL_MPDU_FRAME_INFO_MSDU_LINK_DESC_ADDR_INFO_SW_BUFFER_COOKIE_LSB 11 |
| #define REO_ENTRANCE_RING_1_REO_LEVEL_MPDU_FRAME_INFO_MSDU_LINK_DESC_ADDR_INFO_SW_BUFFER_COOKIE_MASK 0xfffff800 |
| |
| /* EXTERNAL REFERENCE : struct rx_mpdu_desc_info rx_mpdu_desc_info_details */ |
| |
| |
| /* Description REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_MSDU_COUNT |
| |
| Consumer: REO/SW/FW |
| |
| Producer: RXDMA |
| |
| |
| |
| The number of MSDUs within the MPDU |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_MSDU_COUNT_OFFSET 0x00000008 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_MSDU_COUNT_LSB 0 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_MSDU_COUNT_MASK 0x000000ff |
| |
| /* Description REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_MPDU_SEQUENCE_NUMBER |
| |
| Consumer: REO/SW/FW |
| |
| Producer: RXDMA |
| |
| |
| |
| The field can have two different meanings based on the |
| setting of field 'BAR_frame': |
| |
| |
| |
| 'BAR_frame' is NOT set: |
| |
| The MPDU sequence number of the received frame. |
| |
| |
| |
| 'BAR_frame' is set. |
| |
| The MPDU Start sequence number from the BAR frame |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_MPDU_SEQUENCE_NUMBER_OFFSET 0x00000008 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_MPDU_SEQUENCE_NUMBER_LSB 8 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_MPDU_SEQUENCE_NUMBER_MASK 0x000fff00 |
| |
| /* Description REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_FRAGMENT_FLAG |
| |
| Consumer: REO/SW/FW |
| |
| Producer: RXDMA |
| |
| |
| |
| When set, this MPDU is a fragment and REO should forward |
| this fragment MPDU to the REO destination ring without any |
| reorder checks, pn checks or bitmap update. This implies |
| that REO is forwarding the pointer to the MSDU link |
| descriptor. The destination ring is coming from a |
| programmable register setting in REO |
| |
| |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_FRAGMENT_FLAG_OFFSET 0x00000008 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_FRAGMENT_FLAG_LSB 20 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_FRAGMENT_FLAG_MASK 0x00100000 |
| |
| /* Description REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_MPDU_RETRY_BIT |
| |
| Consumer: REO/SW/FW |
| |
| Producer: RXDMA |
| |
| |
| |
| The retry bit setting from the MPDU header of the |
| received frame |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_MPDU_RETRY_BIT_OFFSET 0x00000008 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_MPDU_RETRY_BIT_LSB 21 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_MPDU_RETRY_BIT_MASK 0x00200000 |
| |
| /* Description REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_AMPDU_FLAG |
| |
| Consumer: REO/SW/FW |
| |
| Producer: RXDMA |
| |
| |
| |
| When set, the MPDU was received as part of an A-MPDU. |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_AMPDU_FLAG_OFFSET 0x00000008 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_AMPDU_FLAG_LSB 22 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_AMPDU_FLAG_MASK 0x00400000 |
| |
| /* Description REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_BAR_FRAME |
| |
| Consumer: REO/SW/FW |
| |
| Producer: RXDMA |
| |
| |
| |
| When set, the received frame is a BAR frame. After |
| processing, this frame shall be pushed to SW or deleted. |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_BAR_FRAME_OFFSET 0x00000008 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_BAR_FRAME_LSB 23 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_BAR_FRAME_MASK 0x00800000 |
| |
| /* Description REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_PN_FIELDS_CONTAIN_VALID_INFO |
| |
| Consumer: REO/SW/FW |
| |
| Producer: RXDMA |
| |
| |
| |
| Copied here by RXDMA from RX_MPDU_END |
| |
| When not set, REO will Not perform a PN sequence number |
| check |
| */ |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_PN_FIELDS_CONTAIN_VALID_INFO_OFFSET 0x00000008 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_PN_FIELDS_CONTAIN_VALID_INFO_LSB 24 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_PN_FIELDS_CONTAIN_VALID_INFO_MASK 0x01000000 |
| |
| /* Description REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_SA_IS_VALID |
| |
| When set, OLE found a valid SA entry for all MSDUs in |
| this MPDU |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_SA_IS_VALID_OFFSET 0x00000008 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_SA_IS_VALID_LSB 25 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_SA_IS_VALID_MASK 0x02000000 |
| |
| /* Description REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_SA_IDX_TIMEOUT |
| |
| When set, at least 1 MSDU within the MPDU has an |
| unsuccessful MAC source address search due to the expiration |
| of the search timer. |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_SA_IDX_TIMEOUT_OFFSET 0x00000008 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_SA_IDX_TIMEOUT_LSB 26 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_SA_IDX_TIMEOUT_MASK 0x04000000 |
| |
| /* Description REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_DA_IS_VALID |
| |
| When set, OLE found a valid DA entry for all MSDUs in |
| this MPDU |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_DA_IS_VALID_OFFSET 0x00000008 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_DA_IS_VALID_LSB 27 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_DA_IS_VALID_MASK 0x08000000 |
| |
| /* Description REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_DA_IS_MCBC |
| |
| Field Only valid if da_is_valid is set |
| |
| |
| |
| When set, at least one of the DA addresses is a |
| Multicast or Broadcast address. |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_DA_IS_MCBC_OFFSET 0x00000008 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_DA_IS_MCBC_LSB 28 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_DA_IS_MCBC_MASK 0x10000000 |
| |
| /* Description REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_DA_IDX_TIMEOUT |
| |
| When set, at least 1 MSDU within the MPDU has an |
| unsuccessful MAC destination address search due to the |
| expiration of the search timer. |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_DA_IDX_TIMEOUT_OFFSET 0x00000008 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_DA_IDX_TIMEOUT_LSB 29 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_DA_IDX_TIMEOUT_MASK 0x20000000 |
| |
| /* Description REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_RAW_MPDU |
| |
| Field only valid when first_msdu_in_mpdu_flag is set. |
| |
| |
| |
| When set, the contents in the MSDU buffer contains a |
| 'RAW' MPDU. This 'RAW' MPDU might be spread out over |
| multiple MSDU buffers. |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_RAW_MPDU_OFFSET 0x00000008 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_RAW_MPDU_LSB 30 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_RAW_MPDU_MASK 0x40000000 |
| |
| /* Description REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_MORE_FRAGMENT_FLAG |
| |
| The More Fragment bit setting from the MPDU header of |
| the received frame |
| |
| |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_MORE_FRAGMENT_FLAG_OFFSET 0x00000008 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_MORE_FRAGMENT_FLAG_LSB 31 |
| #define REO_ENTRANCE_RING_2_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_MORE_FRAGMENT_FLAG_MASK 0x80000000 |
| |
| /* Description REO_ENTRANCE_RING_3_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_PEER_META_DATA |
| |
| Meta data that SW has programmed in the Peer table entry |
| of the transmitting STA. |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_3_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_PEER_META_DATA_OFFSET 0x0000000c |
| #define REO_ENTRANCE_RING_3_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_PEER_META_DATA_LSB 0 |
| #define REO_ENTRANCE_RING_3_REO_LEVEL_MPDU_FRAME_INFO_RX_MPDU_DESC_INFO_DETAILS_PEER_META_DATA_MASK 0xffffffff |
| |
| /* Description REO_ENTRANCE_RING_4_RX_REO_QUEUE_DESC_ADDR_31_0 |
| |
| Consumer: REO |
| |
| Producer: RXDMA |
| |
| |
| |
| Address (lower 32 bits) of the REO queue descriptor. |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_4_RX_REO_QUEUE_DESC_ADDR_31_0_OFFSET 0x00000010 |
| #define REO_ENTRANCE_RING_4_RX_REO_QUEUE_DESC_ADDR_31_0_LSB 0 |
| #define REO_ENTRANCE_RING_4_RX_REO_QUEUE_DESC_ADDR_31_0_MASK 0xffffffff |
| |
| /* Description REO_ENTRANCE_RING_5_RX_REO_QUEUE_DESC_ADDR_39_32 |
| |
| Consumer: REO |
| |
| Producer: RXDMA |
| |
| |
| |
| Address (upper 8 bits) of the REO queue descriptor. |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_5_RX_REO_QUEUE_DESC_ADDR_39_32_OFFSET 0x00000014 |
| #define REO_ENTRANCE_RING_5_RX_REO_QUEUE_DESC_ADDR_39_32_LSB 0 |
| #define REO_ENTRANCE_RING_5_RX_REO_QUEUE_DESC_ADDR_39_32_MASK 0x000000ff |
| |
| /* Description REO_ENTRANCE_RING_5_ROUNDED_MPDU_BYTE_COUNT |
| |
| An approximation of the number of bytes received in this |
| MPDU. |
| |
| Used to keeps stats on the amount of data flowing |
| through a queue. |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_5_ROUNDED_MPDU_BYTE_COUNT_OFFSET 0x00000014 |
| #define REO_ENTRANCE_RING_5_ROUNDED_MPDU_BYTE_COUNT_LSB 8 |
| #define REO_ENTRANCE_RING_5_ROUNDED_MPDU_BYTE_COUNT_MASK 0x003fff00 |
| |
| /* Description REO_ENTRANCE_RING_5_REO_DESTINATION_INDICATION |
| |
| RXDMA copy the MPDU's first MSDU's destination |
| indication field here. This is used for REO to be able to |
| re-route the packet to a different SW destination ring if |
| the packet is detected as error in REO. |
| |
| |
| |
| The ID of the REO exit ring where the MSDU frame shall |
| push after (MPDU level) reordering has finished. |
| |
| |
| |
| <enum 0 reo_destination_tcl> Reo will push the frame |
| into the REO2TCL ring |
| |
| <enum 1 reo_destination_sw1> Reo will push the frame |
| into the REO2SW1 ring |
| |
| <enum 2 reo_destination_sw2> Reo will push the frame |
| into the REO2SW2 ring |
| |
| <enum 3 reo_destination_sw3> Reo will push the frame |
| into the REO2SW3 ring |
| |
| <enum 4 reo_destination_sw4> Reo will push the frame |
| into the REO2SW4 ring |
| |
| <enum 5 reo_destination_release> Reo will push the frame |
| into the REO_release ring |
| |
| <enum 6 reo_destination_fw> Reo will push the frame into |
| the REO2FW ring |
| |
| <enum 7 reo_destination_sw5> Reo will push the frame |
| into the REO2SW5 ring |
| |
| <enum 8 reo_destination_sw6> Reo will push the frame |
| into the REO2SW6 ring |
| |
| <enum 9 reo_destination_9> REO remaps this <enum 10 |
| reo_destination_10> REO remaps this |
| |
| <enum 11 reo_destination_11> REO remaps this |
| |
| <enum 12 reo_destination_12> REO remaps this <enum 13 |
| reo_destination_13> REO remaps this |
| |
| <enum 14 reo_destination_14> REO remaps this |
| |
| <enum 15 reo_destination_15> REO remaps this |
| |
| <enum 16 reo_destination_16> REO remaps this |
| |
| <enum 17 reo_destination_17> REO remaps this |
| |
| <enum 18 reo_destination_18> REO remaps this |
| |
| <enum 19 reo_destination_19> REO remaps this |
| |
| <enum 20 reo_destination_20> REO remaps this |
| |
| <enum 21 reo_destination_21> REO remaps this |
| |
| <enum 22 reo_destination_22> REO remaps this |
| |
| <enum 23 reo_destination_23> REO remaps this |
| |
| <enum 24 reo_destination_24> REO remaps this |
| |
| <enum 25 reo_destination_25> REO remaps this |
| |
| <enum 26 reo_destination_26> REO remaps this |
| |
| <enum 27 reo_destination_27> REO remaps this |
| |
| <enum 28 reo_destination_28> REO remaps this |
| |
| <enum 29 reo_destination_29> REO remaps this |
| |
| <enum 30 reo_destination_30> REO remaps this |
| |
| <enum 31 reo_destination_31> REO remaps this |
| |
| |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_5_REO_DESTINATION_INDICATION_OFFSET 0x00000014 |
| #define REO_ENTRANCE_RING_5_REO_DESTINATION_INDICATION_LSB 22 |
| #define REO_ENTRANCE_RING_5_REO_DESTINATION_INDICATION_MASK 0x07c00000 |
| |
| /* Description REO_ENTRANCE_RING_5_FRAMELESS_BAR |
| |
| When set, this REO entrance ring struct contains BAR |
| info from a multi TID BAR frame. The original multi TID BAR |
| frame itself contained all the REO info for the first TID, |
| but all the subsequent TID info and their linkage to the REO |
| descriptors is passed down as 'frameless' BAR info. |
| |
| |
| |
| The only fields valid in this descriptor when this bit |
| is set are: |
| |
| Rx_reo_queue_desc_addr_31_0 |
| |
| RX_reo_queue_desc_addr_39_32 |
| |
| |
| |
| And within the |
| |
| Reo_level_mpdu_frame_info: |
| |
| Within Rx_mpdu_desc_info_details: |
| |
| Mpdu_Sequence_number |
| |
| BAR_frame |
| |
| Peer_meta_data |
| |
| All other fields shall be set to 0 |
| |
| |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_5_FRAMELESS_BAR_OFFSET 0x00000014 |
| #define REO_ENTRANCE_RING_5_FRAMELESS_BAR_LSB 27 |
| #define REO_ENTRANCE_RING_5_FRAMELESS_BAR_MASK 0x08000000 |
| |
| /* Description REO_ENTRANCE_RING_5_RESERVED_5A |
| |
| <legal 0> |
| */ |
| #define REO_ENTRANCE_RING_5_RESERVED_5A_OFFSET 0x00000014 |
| #define REO_ENTRANCE_RING_5_RESERVED_5A_LSB 28 |
| #define REO_ENTRANCE_RING_5_RESERVED_5A_MASK 0xf0000000 |
| |
| /* Description REO_ENTRANCE_RING_6_RXDMA_PUSH_REASON |
| |
| Indicates why rxdma pushed the frame to this ring |
| |
| |
| |
| This field is ignored by REO. |
| |
| |
| |
| <enum 0 rxdma_error_detected> RXDMA detected an error an |
| pushed this frame to this queue |
| |
| <enum 1 rxdma_routing_instruction> RXDMA pushed the |
| frame to this queue per received routing instructions. No |
| error within RXDMA was detected |
| |
| <enum 2 rxdma_rx_flush> RXDMA received an RX_FLUSH. As a |
| result the MSDU link descriptor might not have the |
| last_msdu_in_mpdu_flag set, but instead WBM might just see a |
| NULL pointer in the MSDU link descriptor. This is to be |
| considered a normal condition for this scenario. |
| |
| |
| |
| <legal 0 - 2> |
| */ |
| #define REO_ENTRANCE_RING_6_RXDMA_PUSH_REASON_OFFSET 0x00000018 |
| #define REO_ENTRANCE_RING_6_RXDMA_PUSH_REASON_LSB 0 |
| #define REO_ENTRANCE_RING_6_RXDMA_PUSH_REASON_MASK 0x00000003 |
| |
| /* Description REO_ENTRANCE_RING_6_RXDMA_ERROR_CODE |
| |
| Field only valid when 'rxdma_push_reason' set to |
| 'rxdma_error_detected'. |
| |
| |
| |
| This field is ignored by REO. |
| |
| |
| |
| <enum 0 rxdma_overflow_err>MPDU frame is not complete |
| due to a FIFO overflow error in RXPCU. |
| |
| <enum 1 rxdma_mpdu_length_err>MPDU frame is not complete |
| due to receiving incomplete MPDU from the PHY |
| |
| |
| <enum 3 rxdma_decrypt_err>CRYPTO reported a decryption |
| error or CRYPTO received an encrypted frame, but did not get |
| a valid corresponding key id in the peer entry. |
| |
| <enum 4 rxdma_tkip_mic_err>CRYPTO reported a TKIP MIC |
| error |
| |
| <enum 5 rxdma_unecrypted_err>CRYPTO reported an |
| unencrypted frame error when encrypted was expected |
| |
| <enum 6 rxdma_msdu_len_err>RX OLE reported an MSDU |
| length error |
| |
| <enum 7 rxdma_msdu_limit_err>RX OLE reported that max |
| number of MSDUs allowed in an MPDU got exceeded |
| |
| <enum 8 rxdma_wifi_parse_err>RX OLE reported a parsing |
| error |
| |
| <enum 9 rxdma_amsdu_parse_err>RX OLE reported an A-MSDU |
| parsing error |
| |
| <enum 10 rxdma_sa_timeout_err>RX OLE reported a timeout |
| during SA search |
| |
| <enum 11 rxdma_da_timeout_err>RX OLE reported a timeout |
| during DA search |
| |
| <enum 12 rxdma_flow_timeout_err>RX OLE reported a |
| timeout during flow search |
| |
| <enum 13 rxdma_flush_request>RXDMA received a flush |
| request |
| |
| <enum 14 rxdma_amsdu_fragment_err>Rx PCU reported A-MSDU |
| present as well as a fragmented MPDU. A-MSDU defragmentation |
| is not supported in Lithium SW so this is treated as an |
| error. |
| */ |
| #define REO_ENTRANCE_RING_6_RXDMA_ERROR_CODE_OFFSET 0x00000018 |
| #define REO_ENTRANCE_RING_6_RXDMA_ERROR_CODE_LSB 2 |
| #define REO_ENTRANCE_RING_6_RXDMA_ERROR_CODE_MASK 0x0000007c |
| |
| /* Description REO_ENTRANCE_RING_6_MPDU_FRAGMENT_NUMBER |
| |
| Field only valid when Reo_level_mpdu_frame_info. |
| Rx_mpdu_desc_info_details.Fragment_flag is set. |
| |
| |
| |
| The fragment number from the 802.11 header. |
| |
| |
| |
| Note that the sequence number is embedded in the field: |
| Reo_level_mpdu_frame_info. Rx_mpdu_desc_info_details. |
| Mpdu_sequence_number |
| |
| |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_6_MPDU_FRAGMENT_NUMBER_OFFSET 0x00000018 |
| #define REO_ENTRANCE_RING_6_MPDU_FRAGMENT_NUMBER_LSB 7 |
| #define REO_ENTRANCE_RING_6_MPDU_FRAGMENT_NUMBER_MASK 0x00000780 |
| |
| /* Description REO_ENTRANCE_RING_6_SW_EXCEPTION |
| |
| When not set, REO is performing all its default MPDU |
| processing operations, |
| |
| When set, this REO entrance descriptor is generated by |
| FW, and should be processed as an exception. This implies: |
| |
| NO re-order function is needed. |
| |
| MPDU delinking is determined by the setting of field |
| SW_excection_mpdu_delink |
| |
| Destination ring selection is based on the setting of |
| the field SW_exception_destination_ring_valid |
| |
| In the destination ring descriptor set bit: |
| SW_exception_entry |
| |
| Feature supported only in HastingsPrime |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_6_SW_EXCEPTION_OFFSET 0x00000018 |
| #define REO_ENTRANCE_RING_6_SW_EXCEPTION_LSB 11 |
| #define REO_ENTRANCE_RING_6_SW_EXCEPTION_MASK 0x00000800 |
| |
| /* Description REO_ENTRANCE_RING_6_SW_EXCEPTION_MPDU_DELINK |
| |
| Field only valid when SW_exception is set. |
| |
| 1'b0: REO should NOT delink the MPDU, and thus pass this |
| MPDU on to the destination ring as is. This implies that in |
| the REO_DESTINATION_RING struct field |
| Buf_or_link_desc_addr_info should point to an MSDU link |
| descriptor |
| |
| 1'b1: REO should perform the normal MPDU delink into |
| MSDU operations. |
| |
| Feature supported only in HastingsPrime |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_6_SW_EXCEPTION_MPDU_DELINK_OFFSET 0x00000018 |
| #define REO_ENTRANCE_RING_6_SW_EXCEPTION_MPDU_DELINK_LSB 12 |
| #define REO_ENTRANCE_RING_6_SW_EXCEPTION_MPDU_DELINK_MASK 0x00001000 |
| |
| /* Description REO_ENTRANCE_RING_6_SW_EXCEPTION_DESTINATION_RING_VALID |
| |
| Field only valid when SW_exception is set. |
| |
| 1'b0: REO shall push the MPDU (or delinked MPDU based on |
| the setting of SW_exception_mpdu_delink) to the destination |
| ring according to field reo_destination_indication. |
| |
| 1'b1: REO shall push the MPDU (or delinked MPDU based on |
| the setting of SW_exception_mpdu_delink) to the destination |
| ring according to field SW_exception_destination_ring. |
| |
| Feature supported only in HastingsPrime |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_6_SW_EXCEPTION_DESTINATION_RING_VALID_OFFSET 0x00000018 |
| #define REO_ENTRANCE_RING_6_SW_EXCEPTION_DESTINATION_RING_VALID_LSB 13 |
| #define REO_ENTRANCE_RING_6_SW_EXCEPTION_DESTINATION_RING_VALID_MASK 0x00002000 |
| |
| /* Description REO_ENTRANCE_RING_6_SW_EXCEPTION_DESTINATION_RING |
| |
| Field only valid when fields SW_exception and |
| SW_exception_destination_ring_valid are set. |
| |
| The ID of the ring where REO shall push this frame. |
| |
| <enum 0 reo_destination_tcl> Reo will push the frame |
| into the REO2TCL ring |
| |
| <enum 1 reo_destination_sw1> Reo will push the frame |
| into the REO2SW1 ring |
| |
| <enum 2 reo_destination_sw2> Reo will push the frame |
| into the REO2SW1 ring |
| |
| <enum 3 reo_destination_sw3> Reo will push the frame |
| into the REO2SW1 ring |
| |
| <enum 4 reo_destination_sw4> Reo will push the frame |
| into the REO2SW1 ring |
| |
| <enum 5 reo_destination_release> Reo will push the frame |
| into the REO_release ring |
| |
| <enum 6 reo_destination_fw> Reo will push the frame into |
| the REO2FW ring |
| |
| <enum 7 reo_destination_sw5> REO remaps this |
| |
| <enum 8 reo_destination_sw6> REO remaps this |
| |
| <enum 9 reo_destination_9> REO remaps this |
| |
| <enum 10 reo_destination_10> REO remaps this |
| |
| <enum 11 reo_destination_11> REO remaps this |
| |
| <enum 12 reo_destination_12> REO remaps this <enum 13 |
| reo_destination_13> REO remaps this |
| |
| <enum 14 reo_destination_14> REO remaps this |
| |
| <enum 15 reo_destination_15> REO remaps this |
| |
| <enum 16 reo_destination_16> REO remaps this |
| |
| <enum 17 reo_destination_17> REO remaps this |
| |
| <enum 18 reo_destination_18> REO remaps this |
| |
| <enum 19 reo_destination_19> REO remaps this |
| |
| <enum 20 reo_destination_20> REO remaps this |
| |
| <enum 21 reo_destination_21> REO remaps this |
| |
| <enum 22 reo_destination_22> REO remaps this |
| |
| <enum 23 reo_destination_23> REO remaps this |
| |
| <enum 24 reo_destination_24> REO remaps this |
| |
| <enum 25 reo_destination_25> REO remaps this |
| |
| <enum 26 reo_destination_26> REO remaps this |
| |
| <enum 27 reo_destination_27> REO remaps this |
| |
| <enum 28 reo_destination_28> REO remaps this |
| |
| <enum 29 reo_destination_29> REO remaps this |
| |
| <enum 30 reo_destination_30> REO remaps this |
| |
| <enum 31 reo_destination_31> REO remaps this |
| |
| |
| |
| Feature supported only in HastingsPrime |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_6_SW_EXCEPTION_DESTINATION_RING_OFFSET 0x00000018 |
| #define REO_ENTRANCE_RING_6_SW_EXCEPTION_DESTINATION_RING_LSB 14 |
| #define REO_ENTRANCE_RING_6_SW_EXCEPTION_DESTINATION_RING_MASK 0x0007c000 |
| |
| /* Description REO_ENTRANCE_RING_6_RESERVED_6A |
| |
| <legal 0> |
| */ |
| #define REO_ENTRANCE_RING_6_RESERVED_6A_OFFSET 0x00000018 |
| #define REO_ENTRANCE_RING_6_RESERVED_6A_LSB 19 |
| #define REO_ENTRANCE_RING_6_RESERVED_6A_MASK 0xfff80000 |
| |
| /* Description REO_ENTRANCE_RING_7_RESERVED_7A |
| |
| <legal 0> |
| */ |
| #define REO_ENTRANCE_RING_7_RESERVED_7A_OFFSET 0x0000001c |
| #define REO_ENTRANCE_RING_7_RESERVED_7A_LSB 0 |
| #define REO_ENTRANCE_RING_7_RESERVED_7A_MASK 0x000fffff |
| |
| /* Description REO_ENTRANCE_RING_7_RING_ID |
| |
| Consumer: SW/REO/DEBUG |
| |
| Producer: SRNG (of RXDMA) |
| |
| |
| |
| For debugging. |
| |
| This field is filled in by the SRNG module. |
| |
| It help to identify the ring that is being looked <legal |
| all> |
| */ |
| #define REO_ENTRANCE_RING_7_RING_ID_OFFSET 0x0000001c |
| #define REO_ENTRANCE_RING_7_RING_ID_LSB 20 |
| #define REO_ENTRANCE_RING_7_RING_ID_MASK 0x0ff00000 |
| |
| /* Description REO_ENTRANCE_RING_7_LOOPING_COUNT |
| |
| Consumer: SW/REO/DEBUG |
| |
| Producer: SRNG (of RXDMA) |
| |
| |
| |
| For debugging. |
| |
| This field is filled in by the SRNG module. |
| |
| |
| |
| A count value that indicates the number of times the |
| producer of entries into this Ring has looped around the |
| ring. |
| |
| At initialization time, this value is set to 0. On the |
| first loop, this value is set to 1. After the max value is |
| reached allowed by the number of bits for this field, the |
| count value continues with 0 again. |
| |
| |
| |
| In case SW is the consumer of the ring entries, it can |
| use this field to figure out up to where the producer of |
| entries has created new entries. This eliminates the need to |
| check where the head pointer' of the ring is located once |
| the SW starts processing an interrupt indicating that new |
| entries have been put into this ring... |
| |
| |
| |
| Also note that SW if it wants only needs to look at the |
| LSB bit of this count value. |
| |
| <legal all> |
| */ |
| #define REO_ENTRANCE_RING_7_LOOPING_COUNT_OFFSET 0x0000001c |
| #define REO_ENTRANCE_RING_7_LOOPING_COUNT_LSB 28 |
| #define REO_ENTRANCE_RING_7_LOOPING_COUNT_MASK 0xf0000000 |
| |
| |
| #endif // _REO_ENTRANCE_RING_H_ |