| /* |
| * Copyright (c) 2019 The Linux Foundation. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| // |
| // DO NOT EDIT! This file is automatically generated |
| // These definitions are tied to a particular hardware layout |
| |
| |
| #ifndef _RX_MPDU_INFO_H_ |
| #define _RX_MPDU_INFO_H_ |
| #if !defined(__ASSEMBLER__) |
| #endif |
| |
| #include "rxpt_classify_info.h" |
| |
| // ################ START SUMMARY ################# |
| // |
| // Dword Fields |
| // 0 struct rxpt_classify_info rxpt_classify_info_details; |
| // 1 rx_reo_queue_desc_addr_31_0[31:0] |
| // 2 rx_reo_queue_desc_addr_39_32[7:0], receive_queue_number[23:8], pre_delim_err_warning[24], first_delim_err[25], reserved_11[31:26] |
| // 3 pn_31_0[31:0] |
| // 4 pn_63_32[31:0] |
| // 5 pn_95_64[31:0] |
| // 6 pn_127_96[31:0] |
| // 7 epd_en[0], all_frames_shall_be_encrypted[1], encrypt_type[5:2], wep_key_width_for_variable_key[7:6], mesh_sta[9:8], bssid_hit[10], bssid_number[14:11], tid[18:15], reserved_3a[31:19] |
| // 8 peer_meta_data[31:0] |
| // 9 rxpcu_mpdu_filter_in_category[1:0], sw_frame_group_id[8:2], ndp_frame[9], phy_err[10], phy_err_during_mpdu_header[11], protocol_version_err[12], ast_based_lookup_valid[13], reserved_0a[15:14], phy_ppdu_id[31:16] |
| // 10 ast_index[15:0], sw_peer_id[31:16] |
| // 11 mpdu_frame_control_valid[0], mpdu_duration_valid[1], mac_addr_ad1_valid[2], mac_addr_ad2_valid[3], mac_addr_ad3_valid[4], mac_addr_ad4_valid[5], mpdu_sequence_control_valid[6], mpdu_qos_control_valid[7], mpdu_ht_control_valid[8], frame_encryption_info_valid[9], mpdu_fragment_number[13:10], more_fragment_flag[14], reserved_2a[15], fr_ds[16], to_ds[17], encrypted[18], mpdu_retry[19], mpdu_sequence_number[31:20] |
| // 12 key_id_octet[7:0], new_peer_entry[8], decrypt_needed[9], decap_type[11:10], rx_insert_vlan_c_tag_padding[12], rx_insert_vlan_s_tag_padding[13], strip_vlan_c_tag_decap[14], strip_vlan_s_tag_decap[15], pre_delim_count[27:16], ampdu_flag[28], bar_frame[29], raw_mpdu[30], reserved_12[31] |
| // 13 mpdu_length[13:0], first_mpdu[14], mcast_bcast[15], ast_index_not_found[16], ast_index_timeout[17], power_mgmt[18], non_qos[19], null_data[20], mgmt_type[21], ctrl_type[22], more_data[23], eosp[24], fragment_flag[25], order[26], u_apsd_trigger[27], encrypt_required[28], directed[29], amsdu_present[30], reserved_13[31] |
| // 14 mpdu_frame_control_field[15:0], mpdu_duration_field[31:16] |
| // 15 mac_addr_ad1_31_0[31:0] |
| // 16 mac_addr_ad1_47_32[15:0], mac_addr_ad2_15_0[31:16] |
| // 17 mac_addr_ad2_47_16[31:0] |
| // 18 mac_addr_ad3_31_0[31:0] |
| // 19 mac_addr_ad3_47_32[15:0], mpdu_sequence_control_field[31:16] |
| // 20 mac_addr_ad4_31_0[31:0] |
| // 21 mac_addr_ad4_47_32[15:0], mpdu_qos_control_field[31:16] |
| // 22 mpdu_ht_control_field[31:0] |
| // |
| // ################ END SUMMARY ################# |
| |
| #define NUM_OF_DWORDS_RX_MPDU_INFO 23 |
| |
| struct rx_mpdu_info { |
| struct rxpt_classify_info rxpt_classify_info_details; |
| uint32_t rx_reo_queue_desc_addr_31_0 : 32; //[31:0] |
| uint32_t rx_reo_queue_desc_addr_39_32 : 8, //[7:0] |
| receive_queue_number : 16, //[23:8] |
| pre_delim_err_warning : 1, //[24] |
| first_delim_err : 1, //[25] |
| reserved_11 : 6; //[31:26] |
| uint32_t pn_31_0 : 32; //[31:0] |
| uint32_t pn_63_32 : 32; //[31:0] |
| uint32_t pn_95_64 : 32; //[31:0] |
| uint32_t pn_127_96 : 32; //[31:0] |
| uint32_t epd_en : 1, //[0] |
| all_frames_shall_be_encrypted : 1, //[1] |
| encrypt_type : 4, //[5:2] |
| wep_key_width_for_variable_key : 2, //[7:6] |
| mesh_sta : 2, //[9:8] |
| bssid_hit : 1, //[10] |
| bssid_number : 4, //[14:11] |
| tid : 4, //[18:15] |
| reserved_3a : 13; //[31:19] |
| uint32_t peer_meta_data : 32; //[31:0] |
| uint32_t rxpcu_mpdu_filter_in_category : 2, //[1:0] |
| sw_frame_group_id : 7, //[8:2] |
| ndp_frame : 1, //[9] |
| phy_err : 1, //[10] |
| phy_err_during_mpdu_header : 1, //[11] |
| protocol_version_err : 1, //[12] |
| ast_based_lookup_valid : 1, //[13] |
| reserved_0a : 2, //[15:14] |
| phy_ppdu_id : 16; //[31:16] |
| uint32_t ast_index : 16, //[15:0] |
| sw_peer_id : 16; //[31:16] |
| uint32_t mpdu_frame_control_valid : 1, //[0] |
| mpdu_duration_valid : 1, //[1] |
| mac_addr_ad1_valid : 1, //[2] |
| mac_addr_ad2_valid : 1, //[3] |
| mac_addr_ad3_valid : 1, //[4] |
| mac_addr_ad4_valid : 1, //[5] |
| mpdu_sequence_control_valid : 1, //[6] |
| mpdu_qos_control_valid : 1, //[7] |
| mpdu_ht_control_valid : 1, //[8] |
| frame_encryption_info_valid : 1, //[9] |
| mpdu_fragment_number : 4, //[13:10] |
| more_fragment_flag : 1, //[14] |
| reserved_2a : 1, //[15] |
| fr_ds : 1, //[16] |
| to_ds : 1, //[17] |
| encrypted : 1, //[18] |
| mpdu_retry : 1, //[19] |
| mpdu_sequence_number : 12; //[31:20] |
| uint32_t key_id_octet : 8, //[7:0] |
| new_peer_entry : 1, //[8] |
| decrypt_needed : 1, //[9] |
| decap_type : 2, //[11:10] |
| rx_insert_vlan_c_tag_padding : 1, //[12] |
| rx_insert_vlan_s_tag_padding : 1, //[13] |
| strip_vlan_c_tag_decap : 1, //[14] |
| strip_vlan_s_tag_decap : 1, //[15] |
| pre_delim_count : 12, //[27:16] |
| ampdu_flag : 1, //[28] |
| bar_frame : 1, //[29] |
| raw_mpdu : 1, //[30] |
| reserved_12 : 1; //[31] |
| uint32_t mpdu_length : 14, //[13:0] |
| first_mpdu : 1, //[14] |
| mcast_bcast : 1, //[15] |
| ast_index_not_found : 1, //[16] |
| ast_index_timeout : 1, //[17] |
| power_mgmt : 1, //[18] |
| non_qos : 1, //[19] |
| null_data : 1, //[20] |
| mgmt_type : 1, //[21] |
| ctrl_type : 1, //[22] |
| more_data : 1, //[23] |
| eosp : 1, //[24] |
| fragment_flag : 1, //[25] |
| order : 1, //[26] |
| u_apsd_trigger : 1, //[27] |
| encrypt_required : 1, //[28] |
| directed : 1, //[29] |
| amsdu_present : 1, //[30] |
| reserved_13 : 1; //[31] |
| uint32_t mpdu_frame_control_field : 16, //[15:0] |
| mpdu_duration_field : 16; //[31:16] |
| uint32_t mac_addr_ad1_31_0 : 32; //[31:0] |
| uint32_t mac_addr_ad1_47_32 : 16, //[15:0] |
| mac_addr_ad2_15_0 : 16; //[31:16] |
| uint32_t mac_addr_ad2_47_16 : 32; //[31:0] |
| uint32_t mac_addr_ad3_31_0 : 32; //[31:0] |
| uint32_t mac_addr_ad3_47_32 : 16, //[15:0] |
| mpdu_sequence_control_field : 16; //[31:16] |
| uint32_t mac_addr_ad4_31_0 : 32; //[31:0] |
| uint32_t mac_addr_ad4_47_32 : 16, //[15:0] |
| mpdu_qos_control_field : 16; //[31:16] |
| uint32_t mpdu_ht_control_field : 32; //[31:0] |
| }; |
| |
| /* |
| |
| struct rxpt_classify_info rxpt_classify_info_details |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| RXOLE related classification info |
| |
| <legal all |
| |
| rx_reo_queue_desc_addr_31_0 |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Address (lower 32 bits) of the REO queue descriptor. |
| |
| |
| |
| If no Peer entry lookup happened for this frame, the |
| value wil be set to 0, and the frame shall never be pushed |
| to REO entrance ring. |
| |
| <legal all> |
| |
| rx_reo_queue_desc_addr_39_32 |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Address (upper 8 bits) of the REO queue descriptor. |
| |
| |
| |
| If no Peer entry lookup happened for this frame, the |
| value wil be set to 0, and the frame shall never be pushed |
| to REO entrance ring. |
| |
| <legal all> |
| |
| receive_queue_number |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Indicates the MPDU queue ID to which this MPDU link |
| descriptor belongs |
| |
| Used for tracking and debugging |
| |
| <legal all> |
| |
| pre_delim_err_warning |
| |
| Indicates that a delimiter FCS error was found in |
| between the Previous MPDU and this MPDU. |
| |
| |
| |
| Note that this is just a warning, and does not mean that |
| this MPDU is corrupted in any way. If it is, there will be |
| other errors indicated such as FCS or decrypt errors |
| |
| |
| |
| In case of ndp or phy_err, this field will indicate at |
| least one of delimiters located after the last MPDU in the |
| previous PPDU has been corrupted. |
| |
| first_delim_err |
| |
| Indicates that the first delimiter had a FCS failure. |
| Only valid when first_mpdu and first_msdu are set. |
| |
| |
| |
| |
| reserved_11 |
| |
| <legal 0> |
| |
| pn_31_0 |
| |
| |
| |
| |
| |
| WEP: IV = {key_id_octet, pn2, pn1, pn0}. Only pn[23:0] |
| is valid. |
| |
| TKIP: IV = {pn5, pn4, pn3, pn2, key_id_octet, pn0, |
| WEPSeed[1], pn1}. Only pn[47:0] is valid. |
| |
| AES-CCM: IV = {pn5, pn4, pn3, pn2, key_id_octet, 0x0, |
| pn1, pn0}. Only pn[47:0] is valid. |
| |
| WAPI: IV = {key_id_octet, 0x0, pn15, pn14, pn13, pn12, |
| pn11, pn10, pn9, pn8, pn7, pn6, pn5, pn4, pn3, pn2, pn1, |
| pn0}. pn[127:0] are valid. |
| |
| |
| |
| |
| pn_63_32 |
| |
| |
| |
| |
| Bits [63:32] of the PN number. See description for |
| pn_31_0. |
| |
| |
| |
| |
| pn_95_64 |
| |
| |
| |
| |
| Bits [95:64] of the PN number. See description for |
| pn_31_0. |
| |
| |
| |
| |
| pn_127_96 |
| |
| |
| |
| |
| Bits [127:96] of the PN number. See description for |
| pn_31_0. |
| |
| |
| |
| |
| epd_en |
| |
| Field only valid when AST_based_lookup_valid == 1. |
| |
| |
| |
| |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| If set to one use EPD instead of LPD |
| |
| |
| |
| |
| <legal all> |
| |
| all_frames_shall_be_encrypted |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| When set, all frames (data only ?) shall be encrypted. |
| If not, RX CRYPTO shall set an error flag. |
| |
| <legal all> |
| |
| encrypt_type |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Indicates type of decrypt cipher used (as defined in the |
| peer entry) |
| |
| |
| |
| <enum 0 wep_40> WEP 40-bit |
| |
| <enum 1 wep_104> WEP 104-bit |
| |
| <enum 2 tkip_no_mic> TKIP without MIC |
| |
| <enum 3 wep_128> WEP 128-bit |
| |
| <enum 4 tkip_with_mic> TKIP with MIC |
| |
| <enum 5 wapi> WAPI |
| |
| <enum 6 aes_ccmp_128> AES CCMP 128 |
| |
| <enum 7 no_cipher> No crypto |
| |
| <enum 8 aes_ccmp_256> AES CCMP 256 |
| |
| <enum 9 aes_gcmp_128> AES CCMP 128 |
| |
| <enum 10 aes_gcmp_256> AES CCMP 256 |
| |
| <enum 11 wapi_gcm_sm4> WAPI GCM SM4 |
| |
| |
| |
| <enum 12 wep_varied_width> WEP encryption. As for WEP |
| per keyid the key bit width can vary, the key bit width for |
| this MPDU will be indicated in field |
| wep_key_width_for_variable key |
| |
| <legal 0-12> |
| |
| wep_key_width_for_variable_key |
| |
| Field only valid when key_type is set to |
| wep_varied_width. |
| |
| |
| |
| This field indicates the size of the wep key for this |
| MPDU. |
| |
| |
| |
| <enum 0 wep_varied_width_40> WEP 40-bit |
| |
| <enum 1 wep_varied_width_104> WEP 104-bit |
| |
| <enum 2 wep_varied_width_128> WEP 128-bit |
| |
| |
| |
| <legal 0-2> |
| |
| mesh_sta |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| When set, this is a Mesh (11s) STA. |
| |
| |
| |
| The interpretation of the A-MSDU 'Length' field in the |
| MPDU (if any) is decided by the e-numerations below. |
| |
| |
| |
| <enum 0 MESH_DISABLE> |
| |
| <enum 1 MESH_Q2Q> A-MSDU 'Length' is big endian and |
| includes the length of Mesh Control. |
| |
| <enum 2 MESH_11S_BE> A-MSDU 'Length' is big endian and |
| excludes the length of Mesh Control. |
| |
| <enum 3 MESH_11S_LE> A-MSDU 'Length' is little endian |
| and excludes the length of Mesh Control. This is |
| 802.11s-compliant. |
| |
| <legal all> |
| |
| bssid_hit |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| When set, the BSSID of the incoming frame matched one of |
| the 8 BSSID register values |
| |
| |
| |
| <legal all> |
| |
| bssid_number |
| |
| Field only valid when bssid_hit is set. |
| |
| |
| |
| This number indicates which one out of the 8 BSSID |
| register values matched the incoming frame |
| |
| <legal all> |
| |
| tid |
| |
| Field only valid when mpdu_qos_control_valid is set |
| |
| |
| |
| The TID field in the QoS control field |
| |
| <legal all> |
| |
| reserved_3a |
| |
| <legal 0> |
| |
| peer_meta_data |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Meta data that SW has programmed in the Peer table entry |
| of the transmitting STA. |
| |
| <legal all> |
| |
| rxpcu_mpdu_filter_in_category |
| |
| Field indicates what the reason was that this MPDU frame |
| was allowed to come into the receive path by RXPCU |
| |
| <enum 0 rxpcu_filter_pass> This MPDU passed the normal |
| frame filter programming of rxpcu |
| |
| <enum 1 rxpcu_monitor_client> This MPDU did NOT pass the |
| regular frame filter and would have been dropped, were it |
| not for the frame fitting into the 'monitor_client' |
| category. |
| |
| <enum 2 rxpcu_monitor_other> This MPDU did NOT pass the |
| regular frame filter and also did not pass the |
| rxpcu_monitor_client filter. It would have been dropped |
| accept that it did pass the 'monitor_other' category. |
| |
| |
| |
| Note: for ndp frame, if it was expected because the |
| preceding NDPA was filter_pass, the setting |
| rxpcu_filter_pass will be used. This setting will also be |
| used for every ndp frame in case Promiscuous mode is |
| enabled. |
| |
| |
| |
| In case promiscuous is not enabled, and an NDP is not |
| preceded by a NPDA filter pass frame, the only other setting |
| that could appear here for the NDP is rxpcu_monitor_other. |
| |
| (rxpcu has a configuration bit specifically for this |
| scenario) |
| |
| |
| |
| Note: for |
| |
| <legal 0-2> |
| |
| sw_frame_group_id |
| |
| SW processes frames based on certain classifications. |
| This field indicates to what sw classification this MPDU is |
| mapped. |
| |
| The classification is given in priority order |
| |
| |
| |
| <enum 0 sw_frame_group_NDP_frame> Note: The |
| corresponding Rxpcu_Mpdu_filter_in_category can be |
| rxpcu_filter_pass or rxpcu_monitor_other |
| |
| |
| |
| <enum 1 sw_frame_group_Multicast_data> |
| |
| <enum 2 sw_frame_group_Unicast_data> |
| |
| <enum 3 sw_frame_group_Null_data > This includes mpdus |
| of type Data Null as well as QoS Data Null |
| |
| |
| |
| <enum 4 sw_frame_group_mgmt_0000 > |
| |
| <enum 5 sw_frame_group_mgmt_0001 > |
| |
| <enum 6 sw_frame_group_mgmt_0010 > |
| |
| <enum 7 sw_frame_group_mgmt_0011 > |
| |
| <enum 8 sw_frame_group_mgmt_0100 > |
| |
| <enum 9 sw_frame_group_mgmt_0101 > |
| |
| <enum 10 sw_frame_group_mgmt_0110 > |
| |
| <enum 11 sw_frame_group_mgmt_0111 > |
| |
| <enum 12 sw_frame_group_mgmt_1000 > |
| |
| <enum 13 sw_frame_group_mgmt_1001 > |
| |
| <enum 14 sw_frame_group_mgmt_1010 > |
| |
| <enum 15 sw_frame_group_mgmt_1011 > |
| |
| <enum 16 sw_frame_group_mgmt_1100 > |
| |
| <enum 17 sw_frame_group_mgmt_1101 > |
| |
| <enum 18 sw_frame_group_mgmt_1110 > |
| |
| <enum 19 sw_frame_group_mgmt_1111 > |
| |
| |
| |
| <enum 20 sw_frame_group_ctrl_0000 > |
| |
| <enum 21 sw_frame_group_ctrl_0001 > |
| |
| <enum 22 sw_frame_group_ctrl_0010 > |
| |
| <enum 23 sw_frame_group_ctrl_0011 > |
| |
| <enum 24 sw_frame_group_ctrl_0100 > |
| |
| <enum 25 sw_frame_group_ctrl_0101 > |
| |
| <enum 26 sw_frame_group_ctrl_0110 > |
| |
| <enum 27 sw_frame_group_ctrl_0111 > |
| |
| <enum 28 sw_frame_group_ctrl_1000 > |
| |
| <enum 29 sw_frame_group_ctrl_1001 > |
| |
| <enum 30 sw_frame_group_ctrl_1010 > |
| |
| <enum 31 sw_frame_group_ctrl_1011 > |
| |
| <enum 32 sw_frame_group_ctrl_1100 > |
| |
| <enum 33 sw_frame_group_ctrl_1101 > |
| |
| <enum 34 sw_frame_group_ctrl_1110 > |
| |
| <enum 35 sw_frame_group_ctrl_1111 > |
| |
| |
| |
| <enum 36 sw_frame_group_unsupported> This covers type 3 |
| and protocol version != 0 |
| |
| Note: The corresponding Rxpcu_Mpdu_filter_in_category |
| can only be rxpcu_monitor_other |
| |
| |
| |
| |
| Note: The corresponding Rxpcu_Mpdu_filter_in_category |
| can be rxpcu_filter_pass |
| |
| |
| |
| <legal 0-37> |
| |
| ndp_frame |
| |
| When set, the received frame was an NDP frame, and thus |
| there will be no MPDU data. |
| |
| <legal all> |
| |
| phy_err |
| |
| When set, a PHY error was received before MAC received |
| any data, and thus there will be no MPDU data. |
| |
| <legal all> |
| |
| phy_err_during_mpdu_header |
| |
| When set, a PHY error was received before MAC received |
| the complete MPDU header which was needed for proper |
| decoding |
| |
| <legal all> |
| |
| protocol_version_err |
| |
| Set when RXPCU detected a version error in the Frame |
| control field |
| |
| <legal all> |
| |
| ast_based_lookup_valid |
| |
| When set, AST based lookup for this frame has found a |
| valid result. |
| |
| |
| |
| Note that for NDP frame this will never be set |
| |
| <legal all> |
| |
| reserved_0a |
| |
| <legal 0> |
| |
| phy_ppdu_id |
| |
| A ppdu counter value that PHY increments for every PPDU |
| received. The counter value wraps around |
| |
| <legal all> |
| |
| ast_index |
| |
| This field indicates the index of the AST entry |
| corresponding to this MPDU. It is provided by the GSE module |
| instantiated in RXPCU. |
| |
| A value of 0xFFFF indicates an invalid AST index, |
| meaning that No AST entry was found or NO AST search was |
| performed |
| |
| |
| |
| In case of ndp or phy_err, this field will be set to |
| 0xFFFF |
| |
| <legal all> |
| |
| sw_peer_id |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| This field indicates a unique peer identifier. It is set |
| equal to field 'sw_peer_id' from the AST entry |
| |
| |
| |
| <legal all> |
| |
| mpdu_frame_control_valid |
| |
| When set, the field Mpdu_Frame_control_field has valid |
| information |
| |
| |
| |
| |
| <legal all> |
| |
| mpdu_duration_valid |
| |
| When set, the field Mpdu_duration_field has valid |
| information |
| |
| |
| |
| |
| <legal all> |
| |
| mac_addr_ad1_valid |
| |
| When set, the fields mac_addr_ad1_..... have valid |
| information |
| |
| |
| |
| |
| <legal all> |
| |
| mac_addr_ad2_valid |
| |
| When set, the fields mac_addr_ad2_..... have valid |
| information |
| |
| |
| |
| |
| |
| |
| |
| <legal all> |
| |
| mac_addr_ad3_valid |
| |
| When set, the fields mac_addr_ad3_..... have valid |
| information |
| |
| |
| |
| |
| |
| |
| |
| <legal all> |
| |
| mac_addr_ad4_valid |
| |
| When set, the fields mac_addr_ad4_..... have valid |
| information |
| |
| |
| |
| |
| |
| |
| |
| <legal all> |
| |
| mpdu_sequence_control_valid |
| |
| When set, the fields mpdu_sequence_control_field and |
| mpdu_sequence_number have valid information as well as field |
| |
| |
| |
| For MPDUs without a sequence control field, this field |
| will not be set. |
| |
| |
| |
| |
| <legal all> |
| |
| mpdu_qos_control_valid |
| |
| When set, the field mpdu_qos_control_field has valid |
| information |
| |
| |
| |
| For MPDUs without a QoS control field, this field will |
| not be set. |
| |
| |
| |
| |
| <legal all> |
| |
| mpdu_ht_control_valid |
| |
| When set, the field mpdu_HT_control_field has valid |
| information |
| |
| |
| |
| For MPDUs without a HT control field, this field will |
| not be set. |
| |
| |
| |
| |
| <legal all> |
| |
| frame_encryption_info_valid |
| |
| When set, the encryption related info fields, like IV |
| and PN are valid |
| |
| |
| |
| For MPDUs that are not encrypted, this will not be set. |
| |
| |
| |
| |
| <legal all> |
| |
| mpdu_fragment_number |
| |
| Field only valid when Mpdu_sequence_control_valid is set |
| AND Fragment_flag is set |
| |
| |
| |
| The fragment number from the 802.11 header |
| |
| |
| |
| <legal all> |
| |
| more_fragment_flag |
| |
| The More Fragment bit setting from the MPDU header of |
| the received frame |
| |
| |
| |
| <legal all> |
| |
| reserved_2a |
| |
| <legal 0> |
| |
| fr_ds |
| |
| Field only valid when Mpdu_frame_control_valid is set |
| |
| |
| |
| Set if the from DS bit is set in the frame control. |
| |
| <legal all> |
| |
| to_ds |
| |
| Field only valid when Mpdu_frame_control_valid is set |
| |
| |
| |
| Set if the to DS bit is set in the frame control. |
| |
| <legal all> |
| |
| encrypted |
| |
| Field only valid when Mpdu_frame_control_valid is set. |
| |
| |
| |
| Protected bit from the frame control. |
| |
| <legal all> |
| |
| mpdu_retry |
| |
| Field only valid when Mpdu_frame_control_valid is set. |
| |
| |
| |
| Retry bit from the frame control. Only valid when |
| first_msdu is set. |
| |
| <legal all> |
| |
| mpdu_sequence_number |
| |
| Field only valid when Mpdu_sequence_control_valid is |
| set. |
| |
| |
| |
| The sequence number from the 802.11 header. |
| |
| <legal all> |
| |
| key_id_octet |
| |
| |
| |
| |
| The key ID octet from the IV. |
| |
| |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| <legal all> |
| |
| new_peer_entry |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Set if new RX_PEER_ENTRY TLV follows. If clear, |
| RX_PEER_ENTRY doesn't follow so RX DECRYPTION module either |
| uses old peer entry or not decrypt. |
| |
| <legal all> |
| |
| decrypt_needed |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Set if decryption is needed. |
| |
| |
| |
| Note: |
| |
| When RXPCU sets bit 'ast_index_not_found' and/or |
| ast_index_timeout', RXPCU will also ensure that this bit is |
| NOT set |
| |
| CRYPTO for that reason only needs to evaluate this bit |
| and non of the other ones. |
| |
| <legal all> |
| |
| decap_type |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Used by the OLE during decapsulation. |
| |
| |
| |
| Indicates the decapsulation that HW will perform: |
| |
| |
| |
| <enum 0 RAW> No encapsulation |
| |
| <enum 1 Native_WiFi> |
| |
| <enum 2 Ethernet> Ethernet 2 (DIX) or 802.3 (uses |
| SNAP/LLC) |
| |
| <enum 3 802_3> Indicate Ethernet |
| |
| |
| |
| <legal all> |
| |
| rx_insert_vlan_c_tag_padding |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Insert 4 byte of all zeros as VLAN tag if the rx payload |
| does not have VLAN. Used during decapsulation. |
| |
| <legal all> |
| |
| rx_insert_vlan_s_tag_padding |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Insert 4 byte of all zeros as double VLAN tag if the rx |
| payload does not have VLAN. Used during |
| |
| <legal all> |
| |
| strip_vlan_c_tag_decap |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Strip the VLAN during decapsulation. Used by the OLE. |
| |
| <legal all> |
| |
| strip_vlan_s_tag_decap |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Strip the double VLAN during decapsulation. Used by |
| the OLE. |
| |
| <legal all> |
| |
| pre_delim_count |
| |
| The number of delimiters before this MPDU. |
| |
| |
| |
| Note that this number is cleared at PPDU start. |
| |
| |
| |
| If this MPDU is the first received MPDU in the PPDU and |
| this MPDU gets filtered-in, this field will indicate the |
| number of delimiters located after the last MPDU in the |
| previous PPDU. |
| |
| |
| |
| If this MPDU is located after the first received MPDU in |
| an PPDU, this field will indicate the number of delimiters |
| located between the previous MPDU and this MPDU. |
| |
| |
| |
| In case of ndp or phy_err, this field will indicate the |
| number of delimiters located after the last MPDU in the |
| previous PPDU. |
| |
| <legal all> |
| |
| ampdu_flag |
| |
| When set, received frame was part of an A-MPDU. |
| |
| |
| |
| |
| <legal all> |
| |
| bar_frame |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| When set, received frame is a BAR frame |
| |
| <legal all> |
| |
| raw_mpdu |
| |
| Consumer: SW |
| |
| Producer: RXOLE |
| |
| |
| |
| RXPCU sets this field to 0 and RXOLE overwrites it. |
| |
| |
| |
| Set to 1 by RXOLE when it has not performed any 802.11 |
| to Ethernet/Natvie WiFi header conversion on this MPDU. |
| |
| <legal all> |
| |
| reserved_12 |
| |
| <legal 0> |
| |
| mpdu_length |
| |
| In case of ndp or phy_err this field will be set to 0 |
| |
| |
| |
| MPDU length before decapsulation. |
| |
| <legal all> |
| |
| first_mpdu |
| |
| See definition in RX attention descriptor |
| |
| |
| |
| In case of ndp or phy_err, this field will be set. Note |
| however that there will not actually be any data contents in |
| the MPDU. |
| |
| <legal all> |
| |
| mcast_bcast |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| |
| ast_index_not_found |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| |
| ast_index_timeout |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| |
| power_mgmt |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| |
| non_qos |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 1 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| |
| null_data |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| |
| mgmt_type |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| |
| ctrl_type |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| |
| more_data |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| |
| eosp |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| |
| fragment_flag |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| |
| order |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| |
| |
| <legal all> |
| |
| u_apsd_trigger |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| |
| encrypt_required |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| |
| directed |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| |
| amsdu_present |
| |
| Field only valid when Mpdu_qos_control_valid is set |
| |
| |
| |
| The 'amsdu_present' bit within the QoS control field of |
| the MPDU |
| |
| <legal all> |
| |
| reserved_13 |
| |
| <legal 0> |
| |
| mpdu_frame_control_field |
| |
| Field only valid when Mpdu_frame_control_valid is set |
| |
| |
| |
| The frame control field of this received MPDU. |
| |
| |
| |
| Field only valid when Ndp_frame and phy_err are NOT set |
| |
| |
| |
| Bytes 0 + 1 of the received MPDU |
| |
| <legal all> |
| |
| mpdu_duration_field |
| |
| Field only valid when Mpdu_duration_valid is set |
| |
| |
| |
| The duration field of this received MPDU. |
| |
| <legal all> |
| |
| mac_addr_ad1_31_0 |
| |
| Field only valid when mac_addr_ad1_valid is set |
| |
| |
| |
| The Least Significant 4 bytes of the Received Frames MAC |
| Address AD1 |
| |
| <legal all> |
| |
| mac_addr_ad1_47_32 |
| |
| Field only valid when mac_addr_ad1_valid is set |
| |
| |
| |
| The 2 most significant bytes of the Received Frames MAC |
| Address AD1 |
| |
| <legal all> |
| |
| mac_addr_ad2_15_0 |
| |
| Field only valid when mac_addr_ad2_valid is set |
| |
| |
| |
| The Least Significant 2 bytes of the Received Frames MAC |
| Address AD2 |
| |
| <legal all> |
| |
| mac_addr_ad2_47_16 |
| |
| Field only valid when mac_addr_ad2_valid is set |
| |
| |
| |
| The 4 most significant bytes of the Received Frames MAC |
| Address AD2 |
| |
| <legal all> |
| |
| mac_addr_ad3_31_0 |
| |
| Field only valid when mac_addr_ad3_valid is set |
| |
| |
| |
| The Least Significant 4 bytes of the Received Frames MAC |
| Address AD3 |
| |
| <legal all> |
| |
| mac_addr_ad3_47_32 |
| |
| Field only valid when mac_addr_ad3_valid is set |
| |
| |
| |
| The 2 most significant bytes of the Received Frames MAC |
| Address AD3 |
| |
| <legal all> |
| |
| mpdu_sequence_control_field |
| |
| |
| |
| |
| The sequence control field of the MPDU |
| |
| <legal all> |
| |
| mac_addr_ad4_31_0 |
| |
| Field only valid when mac_addr_ad4_valid is set |
| |
| |
| |
| The Least Significant 4 bytes of the Received Frames MAC |
| Address AD4 |
| |
| <legal all> |
| |
| mac_addr_ad4_47_32 |
| |
| Field only valid when mac_addr_ad4_valid is set |
| |
| |
| |
| The 2 most significant bytes of the Received Frames MAC |
| Address AD4 |
| |
| <legal all> |
| |
| mpdu_qos_control_field |
| |
| Field only valid when mpdu_qos_control_valid is set |
| |
| |
| |
| The sequence control field of the MPDU |
| |
| <legal all> |
| |
| mpdu_ht_control_field |
| |
| Field only valid when mpdu_qos_control_valid is set |
| |
| |
| |
| The HT control field of the MPDU |
| |
| <legal all> |
| */ |
| |
| |
| /* EXTERNAL REFERENCE : struct rxpt_classify_info rxpt_classify_info_details */ |
| |
| |
| /* Description RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_REO_DESTINATION_INDICATION |
| |
| The ID of the REO exit ring where the MSDU frame shall |
| push after (MPDU level) reordering has finished. |
| |
| |
| |
| <enum 0 reo_destination_tcl> Reo will push the frame |
| into the REO2TCL ring |
| |
| <enum 1 reo_destination_sw1> Reo will push the frame |
| into the REO2SW1 ring |
| |
| <enum 2 reo_destination_sw2> Reo will push the frame |
| into the REO2SW2 ring |
| |
| <enum 3 reo_destination_sw3> Reo will push the frame |
| into the REO2SW3 ring |
| |
| <enum 4 reo_destination_sw4> Reo will push the frame |
| into the REO2SW4 ring |
| |
| <enum 5 reo_destination_release> Reo will push the frame |
| into the REO_release ring |
| |
| <enum 6 reo_destination_fw> Reo will push the frame into |
| the REO2FW ring |
| |
| <enum 7 reo_destination_sw5> Reo will push the frame |
| into the REO2SW5 ring |
| |
| <enum 8 reo_destination_sw6> Reo will push the frame |
| into the REO2SW6 ring |
| |
| <enum 9 reo_destination_9> REO remaps this <enum 10 |
| reo_destination_10> REO remaps this |
| |
| <enum 11 reo_destination_11> REO remaps this |
| |
| <enum 12 reo_destination_12> REO remaps this <enum 13 |
| reo_destination_13> REO remaps this |
| |
| <enum 14 reo_destination_14> REO remaps this |
| |
| <enum 15 reo_destination_15> REO remaps this |
| |
| <enum 16 reo_destination_16> REO remaps this |
| |
| <enum 17 reo_destination_17> REO remaps this |
| |
| <enum 18 reo_destination_18> REO remaps this |
| |
| <enum 19 reo_destination_19> REO remaps this |
| |
| <enum 20 reo_destination_20> REO remaps this |
| |
| <enum 21 reo_destination_21> REO remaps this |
| |
| <enum 22 reo_destination_22> REO remaps this |
| |
| <enum 23 reo_destination_23> REO remaps this |
| |
| <enum 24 reo_destination_24> REO remaps this |
| |
| <enum 25 reo_destination_25> REO remaps this |
| |
| <enum 26 reo_destination_26> REO remaps this |
| |
| <enum 27 reo_destination_27> REO remaps this |
| |
| <enum 28 reo_destination_28> REO remaps this |
| |
| <enum 29 reo_destination_29> REO remaps this |
| |
| <enum 30 reo_destination_30> REO remaps this |
| |
| <enum 31 reo_destination_31> REO remaps this |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_REO_DESTINATION_INDICATION_OFFSET 0x00000000 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_REO_DESTINATION_INDICATION_LSB 0 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_REO_DESTINATION_INDICATION_MASK 0x0000001f |
| |
| /* Description RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_LMAC_PEER_ID_MSB |
| |
| If use_flow_id_toeplitz_clfy is set and lmac_peer_id_'sb |
| is 2'b00, Rx OLE uses a REO desination indicati'n of {1'b1, |
| hash[3:0]} using the chosen Toeplitz hash from Common Parser |
| if flow search fails. |
| |
| If use_flow_id_toeplitz_clfy is set and lmac_peer_id_msb |
| 's not 2'b00, Rx OLE uses a REO desination indication of |
| {lmac_peer_id_msb, hash[2:0]} using the chosen Toeplitz hash |
| from Common Parser if flow search fails. |
| |
| This LMAC/peer-based routing is not supported in |
| Hastings80 and HastingsPrime. |
| |
| <legal 0> |
| */ |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_LMAC_PEER_ID_MSB_OFFSET 0x00000000 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_LMAC_PEER_ID_MSB_LSB 5 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_LMAC_PEER_ID_MSB_MASK 0x00000060 |
| |
| /* Description RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_USE_FLOW_ID_TOEPLITZ_CLFY |
| |
| Indication to Rx OLE to enable REO destination routing |
| based on the chosen Toeplitz hash from Common Parser, in |
| case flow search fails |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_USE_FLOW_ID_TOEPLITZ_CLFY_OFFSET 0x00000000 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_USE_FLOW_ID_TOEPLITZ_CLFY_LSB 7 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_USE_FLOW_ID_TOEPLITZ_CLFY_MASK 0x00000080 |
| |
| /* Description RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_UCAST_DATA |
| |
| Filter pass Unicast data frame (matching |
| rxpcu_filter_pass and sw_frame_group_Unicast_data) routing |
| selection |
| |
| |
| |
| 1'b0: source and destination rings are selected from the |
| RxOLE register settings for the packet type |
| |
| |
| |
| 1'b1: source ring and destination ring is selected from |
| the rxdma0_source_ring_selection and |
| rxdma0_destination_ring_selection fields in this STRUCT |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_UCAST_DATA_OFFSET 0x00000000 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_UCAST_DATA_LSB 8 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_UCAST_DATA_MASK 0x00000100 |
| |
| /* Description RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_MCAST_DATA |
| |
| Filter pass Multicast data frame (matching |
| rxpcu_filter_pass and sw_frame_group_Multicast_data) routing |
| selection |
| |
| |
| |
| 1'b0: source and destination rings are selected from the |
| RxOLE register settings for the packet type |
| |
| |
| |
| 1'b1: source ring and destination ring is selected from |
| the rxdma0_source_ring_selection and |
| rxdma0_destination_ring_selection fields in this STRUCT |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_MCAST_DATA_OFFSET 0x00000000 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_MCAST_DATA_LSB 9 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_MCAST_DATA_MASK 0x00000200 |
| |
| /* Description RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_1000 |
| |
| Filter pass BAR frame (matching rxpcu_filter_pass and |
| sw_frame_group_ctrl_1000) routing selection |
| |
| |
| |
| 1'b0: source and destination rings are selected from the |
| RxOLE register settings for the packet type |
| |
| |
| |
| 1'b1: source ring and destination ring is selected from |
| the rxdma0_source_ring_selection and |
| rxdma0_destination_ring_selection fields in this STRUCT |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_1000_OFFSET 0x00000000 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_1000_LSB 10 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_PKT_SELECTION_FP_1000_MASK 0x00000400 |
| |
| /* Description RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_SOURCE_RING_SELECTION |
| |
| Field only valid when for the received frame type the |
| corresponding pkt_selection_fp_... bit is set |
| |
| |
| |
| <enum 0 wbm2rxdma_buf_source_ring> The data buffer for |
| |
| <enum 1 fw2rxdma_buf_source_ring> The data buffer for |
| this frame shall be sourced by fw2rxdma buffer source ring. |
| |
| <enum 2 sw2rxdma_buf_source_ring> The data buffer for |
| this frame shall be sourced by sw2rxdma buffer source ring. |
| |
| <enum 3 no_buffer_ring> The frame shall not be written |
| to any data buffer. |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_SOURCE_RING_SELECTION_OFFSET 0x00000000 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_SOURCE_RING_SELECTION_LSB 11 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_SOURCE_RING_SELECTION_MASK 0x00001800 |
| |
| /* Description RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_DESTINATION_RING_SELECTION |
| |
| Field only valid when for the received frame type the |
| corresponding pkt_selection_fp_... bit is set |
| |
| |
| |
| <enum 0 rxdma_release_ring> RXDMA0 shall push the frame |
| to the Release ring. Effectively this means the frame needs |
| to be dropped. |
| |
| <enum 1 rxdma2fw_ring> RXDMA0 shall push the frame to |
| the FW ring. |
| |
| <enum 2 rxdma2sw_ring> RXDMA0 shall push the frame to |
| the SW ring. |
| |
| <enum 3 rxdma2reo_ring> RXDMA0 shall push the frame to |
| the REO entrance ring. |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_DESTINATION_RING_SELECTION_OFFSET 0x00000000 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_DESTINATION_RING_SELECTION_LSB 13 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_RXDMA0_DESTINATION_RING_SELECTION_MASK 0x00006000 |
| |
| /* Description RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_RESERVED_0B |
| |
| <legal 0> |
| */ |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_RESERVED_0B_OFFSET 0x00000000 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_RESERVED_0B_LSB 15 |
| #define RX_MPDU_INFO_0_RXPT_CLASSIFY_INFO_DETAILS_RESERVED_0B_MASK 0xffff8000 |
| |
| /* Description RX_MPDU_INFO_1_RX_REO_QUEUE_DESC_ADDR_31_0 |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Address (lower 32 bits) of the REO queue descriptor. |
| |
| |
| |
| If no Peer entry lookup happened for this frame, the |
| value wil be set to 0, and the frame shall never be pushed |
| to REO entrance ring. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_1_RX_REO_QUEUE_DESC_ADDR_31_0_OFFSET 0x00000004 |
| #define RX_MPDU_INFO_1_RX_REO_QUEUE_DESC_ADDR_31_0_LSB 0 |
| #define RX_MPDU_INFO_1_RX_REO_QUEUE_DESC_ADDR_31_0_MASK 0xffffffff |
| |
| /* Description RX_MPDU_INFO_2_RX_REO_QUEUE_DESC_ADDR_39_32 |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Address (upper 8 bits) of the REO queue descriptor. |
| |
| |
| |
| If no Peer entry lookup happened for this frame, the |
| value wil be set to 0, and the frame shall never be pushed |
| to REO entrance ring. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_2_RX_REO_QUEUE_DESC_ADDR_39_32_OFFSET 0x00000008 |
| #define RX_MPDU_INFO_2_RX_REO_QUEUE_DESC_ADDR_39_32_LSB 0 |
| #define RX_MPDU_INFO_2_RX_REO_QUEUE_DESC_ADDR_39_32_MASK 0x000000ff |
| |
| /* Description RX_MPDU_INFO_2_RECEIVE_QUEUE_NUMBER |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Indicates the MPDU queue ID to which this MPDU link |
| descriptor belongs |
| |
| Used for tracking and debugging |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_2_RECEIVE_QUEUE_NUMBER_OFFSET 0x00000008 |
| #define RX_MPDU_INFO_2_RECEIVE_QUEUE_NUMBER_LSB 8 |
| #define RX_MPDU_INFO_2_RECEIVE_QUEUE_NUMBER_MASK 0x00ffff00 |
| |
| /* Description RX_MPDU_INFO_2_PRE_DELIM_ERR_WARNING |
| |
| Indicates that a delimiter FCS error was found in |
| between the Previous MPDU and this MPDU. |
| |
| |
| |
| Note that this is just a warning, and does not mean that |
| this MPDU is corrupted in any way. If it is, there will be |
| other errors indicated such as FCS or decrypt errors |
| |
| |
| |
| In case of ndp or phy_err, this field will indicate at |
| least one of delimiters located after the last MPDU in the |
| previous PPDU has been corrupted. |
| */ |
| #define RX_MPDU_INFO_2_PRE_DELIM_ERR_WARNING_OFFSET 0x00000008 |
| #define RX_MPDU_INFO_2_PRE_DELIM_ERR_WARNING_LSB 24 |
| #define RX_MPDU_INFO_2_PRE_DELIM_ERR_WARNING_MASK 0x01000000 |
| |
| /* Description RX_MPDU_INFO_2_FIRST_DELIM_ERR |
| |
| Indicates that the first delimiter had a FCS failure. |
| Only valid when first_mpdu and first_msdu are set. |
| |
| |
| |
| */ |
| #define RX_MPDU_INFO_2_FIRST_DELIM_ERR_OFFSET 0x00000008 |
| #define RX_MPDU_INFO_2_FIRST_DELIM_ERR_LSB 25 |
| #define RX_MPDU_INFO_2_FIRST_DELIM_ERR_MASK 0x02000000 |
| |
| /* Description RX_MPDU_INFO_2_RESERVED_11 |
| |
| <legal 0> |
| */ |
| #define RX_MPDU_INFO_2_RESERVED_11_OFFSET 0x00000008 |
| #define RX_MPDU_INFO_2_RESERVED_11_LSB 26 |
| #define RX_MPDU_INFO_2_RESERVED_11_MASK 0xfc000000 |
| |
| /* Description RX_MPDU_INFO_3_PN_31_0 |
| |
| |
| |
| |
| |
| WEP: IV = {key_id_octet, pn2, pn1, pn0}. Only pn[23:0] |
| is valid. |
| |
| TKIP: IV = {pn5, pn4, pn3, pn2, key_id_octet, pn0, |
| WEPSeed[1], pn1}. Only pn[47:0] is valid. |
| |
| AES-CCM: IV = {pn5, pn4, pn3, pn2, key_id_octet, 0x0, |
| pn1, pn0}. Only pn[47:0] is valid. |
| |
| WAPI: IV = {key_id_octet, 0x0, pn15, pn14, pn13, pn12, |
| pn11, pn10, pn9, pn8, pn7, pn6, pn5, pn4, pn3, pn2, pn1, |
| pn0}. pn[127:0] are valid. |
| |
| |
| |
| */ |
| #define RX_MPDU_INFO_3_PN_31_0_OFFSET 0x0000000c |
| #define RX_MPDU_INFO_3_PN_31_0_LSB 0 |
| #define RX_MPDU_INFO_3_PN_31_0_MASK 0xffffffff |
| |
| /* Description RX_MPDU_INFO_4_PN_63_32 |
| |
| |
| |
| |
| Bits [63:32] of the PN number. See description for |
| pn_31_0. |
| |
| |
| |
| */ |
| #define RX_MPDU_INFO_4_PN_63_32_OFFSET 0x00000010 |
| #define RX_MPDU_INFO_4_PN_63_32_LSB 0 |
| #define RX_MPDU_INFO_4_PN_63_32_MASK 0xffffffff |
| |
| /* Description RX_MPDU_INFO_5_PN_95_64 |
| |
| |
| |
| |
| Bits [95:64] of the PN number. See description for |
| pn_31_0. |
| |
| |
| |
| */ |
| #define RX_MPDU_INFO_5_PN_95_64_OFFSET 0x00000014 |
| #define RX_MPDU_INFO_5_PN_95_64_LSB 0 |
| #define RX_MPDU_INFO_5_PN_95_64_MASK 0xffffffff |
| |
| /* Description RX_MPDU_INFO_6_PN_127_96 |
| |
| |
| |
| |
| Bits [127:96] of the PN number. See description for |
| pn_31_0. |
| |
| |
| |
| */ |
| #define RX_MPDU_INFO_6_PN_127_96_OFFSET 0x00000018 |
| #define RX_MPDU_INFO_6_PN_127_96_LSB 0 |
| #define RX_MPDU_INFO_6_PN_127_96_MASK 0xffffffff |
| |
| /* Description RX_MPDU_INFO_7_EPD_EN |
| |
| Field only valid when AST_based_lookup_valid == 1. |
| |
| |
| |
| |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| If set to one use EPD instead of LPD |
| |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_7_EPD_EN_OFFSET 0x0000001c |
| #define RX_MPDU_INFO_7_EPD_EN_LSB 0 |
| #define RX_MPDU_INFO_7_EPD_EN_MASK 0x00000001 |
| |
| /* Description RX_MPDU_INFO_7_ALL_FRAMES_SHALL_BE_ENCRYPTED |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| When set, all frames (data only ?) shall be encrypted. |
| If not, RX CRYPTO shall set an error flag. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_7_ALL_FRAMES_SHALL_BE_ENCRYPTED_OFFSET 0x0000001c |
| #define RX_MPDU_INFO_7_ALL_FRAMES_SHALL_BE_ENCRYPTED_LSB 1 |
| #define RX_MPDU_INFO_7_ALL_FRAMES_SHALL_BE_ENCRYPTED_MASK 0x00000002 |
| |
| /* Description RX_MPDU_INFO_7_ENCRYPT_TYPE |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Indicates type of decrypt cipher used (as defined in the |
| peer entry) |
| |
| |
| |
| <enum 0 wep_40> WEP 40-bit |
| |
| <enum 1 wep_104> WEP 104-bit |
| |
| <enum 2 tkip_no_mic> TKIP without MIC |
| |
| <enum 3 wep_128> WEP 128-bit |
| |
| <enum 4 tkip_with_mic> TKIP with MIC |
| |
| <enum 5 wapi> WAPI |
| |
| <enum 6 aes_ccmp_128> AES CCMP 128 |
| |
| <enum 7 no_cipher> No crypto |
| |
| <enum 8 aes_ccmp_256> AES CCMP 256 |
| |
| <enum 9 aes_gcmp_128> AES CCMP 128 |
| |
| <enum 10 aes_gcmp_256> AES CCMP 256 |
| |
| <enum 11 wapi_gcm_sm4> WAPI GCM SM4 |
| |
| |
| |
| <enum 12 wep_varied_width> WEP encryption. As for WEP |
| per keyid the key bit width can vary, the key bit width for |
| this MPDU will be indicated in field |
| wep_key_width_for_variable key |
| |
| <legal 0-12> |
| */ |
| #define RX_MPDU_INFO_7_ENCRYPT_TYPE_OFFSET 0x0000001c |
| #define RX_MPDU_INFO_7_ENCRYPT_TYPE_LSB 2 |
| #define RX_MPDU_INFO_7_ENCRYPT_TYPE_MASK 0x0000003c |
| |
| /* Description RX_MPDU_INFO_7_WEP_KEY_WIDTH_FOR_VARIABLE_KEY |
| |
| Field only valid when key_type is set to |
| wep_varied_width. |
| |
| |
| |
| This field indicates the size of the wep key for this |
| MPDU. |
| |
| |
| |
| <enum 0 wep_varied_width_40> WEP 40-bit |
| |
| <enum 1 wep_varied_width_104> WEP 104-bit |
| |
| <enum 2 wep_varied_width_128> WEP 128-bit |
| |
| |
| |
| <legal 0-2> |
| */ |
| #define RX_MPDU_INFO_7_WEP_KEY_WIDTH_FOR_VARIABLE_KEY_OFFSET 0x0000001c |
| #define RX_MPDU_INFO_7_WEP_KEY_WIDTH_FOR_VARIABLE_KEY_LSB 6 |
| #define RX_MPDU_INFO_7_WEP_KEY_WIDTH_FOR_VARIABLE_KEY_MASK 0x000000c0 |
| |
| /* Description RX_MPDU_INFO_7_MESH_STA |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| When set, this is a Mesh (11s) STA. |
| |
| |
| |
| The interpretation of the A-MSDU 'Length' field in the |
| MPDU (if any) is decided by the e-numerations below. |
| |
| |
| |
| <enum 0 MESH_DISABLE> |
| |
| <enum 1 MESH_Q2Q> A-MSDU 'Length' is big endian and |
| includes the length of Mesh Control. |
| |
| <enum 2 MESH_11S_BE> A-MSDU 'Length' is big endian and |
| excludes the length of Mesh Control. |
| |
| <enum 3 MESH_11S_LE> A-MSDU 'Length' is little endian |
| and excludes the length of Mesh Control. This is |
| 802.11s-compliant. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_7_MESH_STA_OFFSET 0x0000001c |
| #define RX_MPDU_INFO_7_MESH_STA_LSB 8 |
| #define RX_MPDU_INFO_7_MESH_STA_MASK 0x00000300 |
| |
| /* Description RX_MPDU_INFO_7_BSSID_HIT |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| When set, the BSSID of the incoming frame matched one of |
| the 8 BSSID register values |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_7_BSSID_HIT_OFFSET 0x0000001c |
| #define RX_MPDU_INFO_7_BSSID_HIT_LSB 10 |
| #define RX_MPDU_INFO_7_BSSID_HIT_MASK 0x00000400 |
| |
| /* Description RX_MPDU_INFO_7_BSSID_NUMBER |
| |
| Field only valid when bssid_hit is set. |
| |
| |
| |
| This number indicates which one out of the 8 BSSID |
| register values matched the incoming frame |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_7_BSSID_NUMBER_OFFSET 0x0000001c |
| #define RX_MPDU_INFO_7_BSSID_NUMBER_LSB 11 |
| #define RX_MPDU_INFO_7_BSSID_NUMBER_MASK 0x00007800 |
| |
| /* Description RX_MPDU_INFO_7_TID |
| |
| Field only valid when mpdu_qos_control_valid is set |
| |
| |
| |
| The TID field in the QoS control field |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_7_TID_OFFSET 0x0000001c |
| #define RX_MPDU_INFO_7_TID_LSB 15 |
| #define RX_MPDU_INFO_7_TID_MASK 0x00078000 |
| |
| /* Description RX_MPDU_INFO_7_RESERVED_3A |
| |
| <legal 0> |
| */ |
| #define RX_MPDU_INFO_7_RESERVED_3A_OFFSET 0x0000001c |
| #define RX_MPDU_INFO_7_RESERVED_3A_LSB 19 |
| #define RX_MPDU_INFO_7_RESERVED_3A_MASK 0xfff80000 |
| |
| /* Description RX_MPDU_INFO_8_PEER_META_DATA |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Meta data that SW has programmed in the Peer table entry |
| of the transmitting STA. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_8_PEER_META_DATA_OFFSET 0x00000020 |
| #define RX_MPDU_INFO_8_PEER_META_DATA_LSB 0 |
| #define RX_MPDU_INFO_8_PEER_META_DATA_MASK 0xffffffff |
| |
| /* Description RX_MPDU_INFO_9_RXPCU_MPDU_FILTER_IN_CATEGORY |
| |
| Field indicates what the reason was that this MPDU frame |
| was allowed to come into the receive path by RXPCU |
| |
| <enum 0 rxpcu_filter_pass> This MPDU passed the normal |
| frame filter programming of rxpcu |
| |
| <enum 1 rxpcu_monitor_client> This MPDU did NOT pass the |
| regular frame filter and would have been dropped, were it |
| not for the frame fitting into the 'monitor_client' |
| category. |
| |
| <enum 2 rxpcu_monitor_other> This MPDU did NOT pass the |
| regular frame filter and also did not pass the |
| rxpcu_monitor_client filter. It would have been dropped |
| accept that it did pass the 'monitor_other' category. |
| |
| |
| |
| Note: for ndp frame, if it was expected because the |
| preceding NDPA was filter_pass, the setting |
| rxpcu_filter_pass will be used. This setting will also be |
| used for every ndp frame in case Promiscuous mode is |
| enabled. |
| |
| |
| |
| In case promiscuous is not enabled, and an NDP is not |
| preceded by a NPDA filter pass frame, the only other setting |
| that could appear here for the NDP is rxpcu_monitor_other. |
| |
| (rxpcu has a configuration bit specifically for this |
| scenario) |
| |
| |
| |
| Note: for |
| |
| <legal 0-2> |
| */ |
| #define RX_MPDU_INFO_9_RXPCU_MPDU_FILTER_IN_CATEGORY_OFFSET 0x00000024 |
| #define RX_MPDU_INFO_9_RXPCU_MPDU_FILTER_IN_CATEGORY_LSB 0 |
| #define RX_MPDU_INFO_9_RXPCU_MPDU_FILTER_IN_CATEGORY_MASK 0x00000003 |
| |
| /* Description RX_MPDU_INFO_9_SW_FRAME_GROUP_ID |
| |
| SW processes frames based on certain classifications. |
| This field indicates to what sw classification this MPDU is |
| mapped. |
| |
| The classification is given in priority order |
| |
| |
| |
| <enum 0 sw_frame_group_NDP_frame> Note: The |
| corresponding Rxpcu_Mpdu_filter_in_category can be |
| rxpcu_filter_pass or rxpcu_monitor_other |
| |
| |
| |
| <enum 1 sw_frame_group_Multicast_data> |
| |
| <enum 2 sw_frame_group_Unicast_data> |
| |
| <enum 3 sw_frame_group_Null_data > This includes mpdus |
| of type Data Null as well as QoS Data Null |
| |
| |
| |
| <enum 4 sw_frame_group_mgmt_0000 > |
| |
| <enum 5 sw_frame_group_mgmt_0001 > |
| |
| <enum 6 sw_frame_group_mgmt_0010 > |
| |
| <enum 7 sw_frame_group_mgmt_0011 > |
| |
| <enum 8 sw_frame_group_mgmt_0100 > |
| |
| <enum 9 sw_frame_group_mgmt_0101 > |
| |
| <enum 10 sw_frame_group_mgmt_0110 > |
| |
| <enum 11 sw_frame_group_mgmt_0111 > |
| |
| <enum 12 sw_frame_group_mgmt_1000 > |
| |
| <enum 13 sw_frame_group_mgmt_1001 > |
| |
| <enum 14 sw_frame_group_mgmt_1010 > |
| |
| <enum 15 sw_frame_group_mgmt_1011 > |
| |
| <enum 16 sw_frame_group_mgmt_1100 > |
| |
| <enum 17 sw_frame_group_mgmt_1101 > |
| |
| <enum 18 sw_frame_group_mgmt_1110 > |
| |
| <enum 19 sw_frame_group_mgmt_1111 > |
| |
| |
| |
| <enum 20 sw_frame_group_ctrl_0000 > |
| |
| <enum 21 sw_frame_group_ctrl_0001 > |
| |
| <enum 22 sw_frame_group_ctrl_0010 > |
| |
| <enum 23 sw_frame_group_ctrl_0011 > |
| |
| <enum 24 sw_frame_group_ctrl_0100 > |
| |
| <enum 25 sw_frame_group_ctrl_0101 > |
| |
| <enum 26 sw_frame_group_ctrl_0110 > |
| |
| <enum 27 sw_frame_group_ctrl_0111 > |
| |
| <enum 28 sw_frame_group_ctrl_1000 > |
| |
| <enum 29 sw_frame_group_ctrl_1001 > |
| |
| <enum 30 sw_frame_group_ctrl_1010 > |
| |
| <enum 31 sw_frame_group_ctrl_1011 > |
| |
| <enum 32 sw_frame_group_ctrl_1100 > |
| |
| <enum 33 sw_frame_group_ctrl_1101 > |
| |
| <enum 34 sw_frame_group_ctrl_1110 > |
| |
| <enum 35 sw_frame_group_ctrl_1111 > |
| |
| |
| |
| <enum 36 sw_frame_group_unsupported> This covers type 3 |
| and protocol version != 0 |
| |
| Note: The corresponding Rxpcu_Mpdu_filter_in_category |
| can only be rxpcu_monitor_other |
| |
| |
| |
| |
| Note: The corresponding Rxpcu_Mpdu_filter_in_category |
| can be rxpcu_filter_pass |
| |
| |
| |
| <legal 0-37> |
| */ |
| #define RX_MPDU_INFO_9_SW_FRAME_GROUP_ID_OFFSET 0x00000024 |
| #define RX_MPDU_INFO_9_SW_FRAME_GROUP_ID_LSB 2 |
| #define RX_MPDU_INFO_9_SW_FRAME_GROUP_ID_MASK 0x000001fc |
| |
| /* Description RX_MPDU_INFO_9_NDP_FRAME |
| |
| When set, the received frame was an NDP frame, and thus |
| there will be no MPDU data. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_9_NDP_FRAME_OFFSET 0x00000024 |
| #define RX_MPDU_INFO_9_NDP_FRAME_LSB 9 |
| #define RX_MPDU_INFO_9_NDP_FRAME_MASK 0x00000200 |
| |
| /* Description RX_MPDU_INFO_9_PHY_ERR |
| |
| When set, a PHY error was received before MAC received |
| any data, and thus there will be no MPDU data. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_9_PHY_ERR_OFFSET 0x00000024 |
| #define RX_MPDU_INFO_9_PHY_ERR_LSB 10 |
| #define RX_MPDU_INFO_9_PHY_ERR_MASK 0x00000400 |
| |
| /* Description RX_MPDU_INFO_9_PHY_ERR_DURING_MPDU_HEADER |
| |
| When set, a PHY error was received before MAC received |
| the complete MPDU header which was needed for proper |
| decoding |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_9_PHY_ERR_DURING_MPDU_HEADER_OFFSET 0x00000024 |
| #define RX_MPDU_INFO_9_PHY_ERR_DURING_MPDU_HEADER_LSB 11 |
| #define RX_MPDU_INFO_9_PHY_ERR_DURING_MPDU_HEADER_MASK 0x00000800 |
| |
| /* Description RX_MPDU_INFO_9_PROTOCOL_VERSION_ERR |
| |
| Set when RXPCU detected a version error in the Frame |
| control field |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_9_PROTOCOL_VERSION_ERR_OFFSET 0x00000024 |
| #define RX_MPDU_INFO_9_PROTOCOL_VERSION_ERR_LSB 12 |
| #define RX_MPDU_INFO_9_PROTOCOL_VERSION_ERR_MASK 0x00001000 |
| |
| /* Description RX_MPDU_INFO_9_AST_BASED_LOOKUP_VALID |
| |
| When set, AST based lookup for this frame has found a |
| valid result. |
| |
| |
| |
| Note that for NDP frame this will never be set |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_9_AST_BASED_LOOKUP_VALID_OFFSET 0x00000024 |
| #define RX_MPDU_INFO_9_AST_BASED_LOOKUP_VALID_LSB 13 |
| #define RX_MPDU_INFO_9_AST_BASED_LOOKUP_VALID_MASK 0x00002000 |
| |
| /* Description RX_MPDU_INFO_9_RESERVED_0A |
| |
| <legal 0> |
| */ |
| #define RX_MPDU_INFO_9_RESERVED_0A_OFFSET 0x00000024 |
| #define RX_MPDU_INFO_9_RESERVED_0A_LSB 14 |
| #define RX_MPDU_INFO_9_RESERVED_0A_MASK 0x0000c000 |
| |
| /* Description RX_MPDU_INFO_9_PHY_PPDU_ID |
| |
| A ppdu counter value that PHY increments for every PPDU |
| received. The counter value wraps around |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_9_PHY_PPDU_ID_OFFSET 0x00000024 |
| #define RX_MPDU_INFO_9_PHY_PPDU_ID_LSB 16 |
| #define RX_MPDU_INFO_9_PHY_PPDU_ID_MASK 0xffff0000 |
| |
| /* Description RX_MPDU_INFO_10_AST_INDEX |
| |
| This field indicates the index of the AST entry |
| corresponding to this MPDU. It is provided by the GSE module |
| instantiated in RXPCU. |
| |
| A value of 0xFFFF indicates an invalid AST index, |
| meaning that No AST entry was found or NO AST search was |
| performed |
| |
| |
| |
| In case of ndp or phy_err, this field will be set to |
| 0xFFFF |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_10_AST_INDEX_OFFSET 0x00000028 |
| #define RX_MPDU_INFO_10_AST_INDEX_LSB 0 |
| #define RX_MPDU_INFO_10_AST_INDEX_MASK 0x0000ffff |
| |
| /* Description RX_MPDU_INFO_10_SW_PEER_ID |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| This field indicates a unique peer identifier. It is set |
| equal to field 'sw_peer_id' from the AST entry |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_10_SW_PEER_ID_OFFSET 0x00000028 |
| #define RX_MPDU_INFO_10_SW_PEER_ID_LSB 16 |
| #define RX_MPDU_INFO_10_SW_PEER_ID_MASK 0xffff0000 |
| |
| /* Description RX_MPDU_INFO_11_MPDU_FRAME_CONTROL_VALID |
| |
| When set, the field Mpdu_Frame_control_field has valid |
| information |
| |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_MPDU_FRAME_CONTROL_VALID_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_MPDU_FRAME_CONTROL_VALID_LSB 0 |
| #define RX_MPDU_INFO_11_MPDU_FRAME_CONTROL_VALID_MASK 0x00000001 |
| |
| /* Description RX_MPDU_INFO_11_MPDU_DURATION_VALID |
| |
| When set, the field Mpdu_duration_field has valid |
| information |
| |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_MPDU_DURATION_VALID_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_MPDU_DURATION_VALID_LSB 1 |
| #define RX_MPDU_INFO_11_MPDU_DURATION_VALID_MASK 0x00000002 |
| |
| /* Description RX_MPDU_INFO_11_MAC_ADDR_AD1_VALID |
| |
| When set, the fields mac_addr_ad1_..... have valid |
| information |
| |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_MAC_ADDR_AD1_VALID_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_MAC_ADDR_AD1_VALID_LSB 2 |
| #define RX_MPDU_INFO_11_MAC_ADDR_AD1_VALID_MASK 0x00000004 |
| |
| /* Description RX_MPDU_INFO_11_MAC_ADDR_AD2_VALID |
| |
| When set, the fields mac_addr_ad2_..... have valid |
| information |
| |
| |
| |
| |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_MAC_ADDR_AD2_VALID_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_MAC_ADDR_AD2_VALID_LSB 3 |
| #define RX_MPDU_INFO_11_MAC_ADDR_AD2_VALID_MASK 0x00000008 |
| |
| /* Description RX_MPDU_INFO_11_MAC_ADDR_AD3_VALID |
| |
| When set, the fields mac_addr_ad3_..... have valid |
| information |
| |
| |
| |
| |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_MAC_ADDR_AD3_VALID_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_MAC_ADDR_AD3_VALID_LSB 4 |
| #define RX_MPDU_INFO_11_MAC_ADDR_AD3_VALID_MASK 0x00000010 |
| |
| /* Description RX_MPDU_INFO_11_MAC_ADDR_AD4_VALID |
| |
| When set, the fields mac_addr_ad4_..... have valid |
| information |
| |
| |
| |
| |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_MAC_ADDR_AD4_VALID_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_MAC_ADDR_AD4_VALID_LSB 5 |
| #define RX_MPDU_INFO_11_MAC_ADDR_AD4_VALID_MASK 0x00000020 |
| |
| /* Description RX_MPDU_INFO_11_MPDU_SEQUENCE_CONTROL_VALID |
| |
| When set, the fields mpdu_sequence_control_field and |
| mpdu_sequence_number have valid information as well as field |
| |
| |
| |
| For MPDUs without a sequence control field, this field |
| will not be set. |
| |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_MPDU_SEQUENCE_CONTROL_VALID_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_MPDU_SEQUENCE_CONTROL_VALID_LSB 6 |
| #define RX_MPDU_INFO_11_MPDU_SEQUENCE_CONTROL_VALID_MASK 0x00000040 |
| |
| /* Description RX_MPDU_INFO_11_MPDU_QOS_CONTROL_VALID |
| |
| When set, the field mpdu_qos_control_field has valid |
| information |
| |
| |
| |
| For MPDUs without a QoS control field, this field will |
| not be set. |
| |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_MPDU_QOS_CONTROL_VALID_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_MPDU_QOS_CONTROL_VALID_LSB 7 |
| #define RX_MPDU_INFO_11_MPDU_QOS_CONTROL_VALID_MASK 0x00000080 |
| |
| /* Description RX_MPDU_INFO_11_MPDU_HT_CONTROL_VALID |
| |
| When set, the field mpdu_HT_control_field has valid |
| information |
| |
| |
| |
| For MPDUs without a HT control field, this field will |
| not be set. |
| |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_MPDU_HT_CONTROL_VALID_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_MPDU_HT_CONTROL_VALID_LSB 8 |
| #define RX_MPDU_INFO_11_MPDU_HT_CONTROL_VALID_MASK 0x00000100 |
| |
| /* Description RX_MPDU_INFO_11_FRAME_ENCRYPTION_INFO_VALID |
| |
| When set, the encryption related info fields, like IV |
| and PN are valid |
| |
| |
| |
| For MPDUs that are not encrypted, this will not be set. |
| |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_FRAME_ENCRYPTION_INFO_VALID_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_FRAME_ENCRYPTION_INFO_VALID_LSB 9 |
| #define RX_MPDU_INFO_11_FRAME_ENCRYPTION_INFO_VALID_MASK 0x00000200 |
| |
| /* Description RX_MPDU_INFO_11_MPDU_FRAGMENT_NUMBER |
| |
| Field only valid when Mpdu_sequence_control_valid is set |
| AND Fragment_flag is set |
| |
| |
| |
| The fragment number from the 802.11 header |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_MPDU_FRAGMENT_NUMBER_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_MPDU_FRAGMENT_NUMBER_LSB 10 |
| #define RX_MPDU_INFO_11_MPDU_FRAGMENT_NUMBER_MASK 0x00003c00 |
| |
| /* Description RX_MPDU_INFO_11_MORE_FRAGMENT_FLAG |
| |
| The More Fragment bit setting from the MPDU header of |
| the received frame |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_MORE_FRAGMENT_FLAG_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_MORE_FRAGMENT_FLAG_LSB 14 |
| #define RX_MPDU_INFO_11_MORE_FRAGMENT_FLAG_MASK 0x00004000 |
| |
| /* Description RX_MPDU_INFO_11_RESERVED_2A |
| |
| <legal 0> |
| */ |
| #define RX_MPDU_INFO_11_RESERVED_2A_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_RESERVED_2A_LSB 15 |
| #define RX_MPDU_INFO_11_RESERVED_2A_MASK 0x00008000 |
| |
| /* Description RX_MPDU_INFO_11_FR_DS |
| |
| Field only valid when Mpdu_frame_control_valid is set |
| |
| |
| |
| Set if the from DS bit is set in the frame control. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_FR_DS_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_FR_DS_LSB 16 |
| #define RX_MPDU_INFO_11_FR_DS_MASK 0x00010000 |
| |
| /* Description RX_MPDU_INFO_11_TO_DS |
| |
| Field only valid when Mpdu_frame_control_valid is set |
| |
| |
| |
| Set if the to DS bit is set in the frame control. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_TO_DS_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_TO_DS_LSB 17 |
| #define RX_MPDU_INFO_11_TO_DS_MASK 0x00020000 |
| |
| /* Description RX_MPDU_INFO_11_ENCRYPTED |
| |
| Field only valid when Mpdu_frame_control_valid is set. |
| |
| |
| |
| Protected bit from the frame control. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_ENCRYPTED_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_ENCRYPTED_LSB 18 |
| #define RX_MPDU_INFO_11_ENCRYPTED_MASK 0x00040000 |
| |
| /* Description RX_MPDU_INFO_11_MPDU_RETRY |
| |
| Field only valid when Mpdu_frame_control_valid is set. |
| |
| |
| |
| Retry bit from the frame control. Only valid when |
| first_msdu is set. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_MPDU_RETRY_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_MPDU_RETRY_LSB 19 |
| #define RX_MPDU_INFO_11_MPDU_RETRY_MASK 0x00080000 |
| |
| /* Description RX_MPDU_INFO_11_MPDU_SEQUENCE_NUMBER |
| |
| Field only valid when Mpdu_sequence_control_valid is |
| set. |
| |
| |
| |
| The sequence number from the 802.11 header. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_11_MPDU_SEQUENCE_NUMBER_OFFSET 0x0000002c |
| #define RX_MPDU_INFO_11_MPDU_SEQUENCE_NUMBER_LSB 20 |
| #define RX_MPDU_INFO_11_MPDU_SEQUENCE_NUMBER_MASK 0xfff00000 |
| |
| /* Description RX_MPDU_INFO_12_KEY_ID_OCTET |
| |
| |
| |
| |
| The key ID octet from the IV. |
| |
| |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_12_KEY_ID_OCTET_OFFSET 0x00000030 |
| #define RX_MPDU_INFO_12_KEY_ID_OCTET_LSB 0 |
| #define RX_MPDU_INFO_12_KEY_ID_OCTET_MASK 0x000000ff |
| |
| /* Description RX_MPDU_INFO_12_NEW_PEER_ENTRY |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Set if new RX_PEER_ENTRY TLV follows. If clear, |
| RX_PEER_ENTRY doesn't follow so RX DECRYPTION module either |
| uses old peer entry or not decrypt. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_12_NEW_PEER_ENTRY_OFFSET 0x00000030 |
| #define RX_MPDU_INFO_12_NEW_PEER_ENTRY_LSB 8 |
| #define RX_MPDU_INFO_12_NEW_PEER_ENTRY_MASK 0x00000100 |
| |
| /* Description RX_MPDU_INFO_12_DECRYPT_NEEDED |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Set if decryption is needed. |
| |
| |
| |
| Note: |
| |
| When RXPCU sets bit 'ast_index_not_found' and/or |
| ast_index_timeout', RXPCU will also ensure that this bit is |
| NOT set |
| |
| CRYPTO for that reason only needs to evaluate this bit |
| and non of the other ones. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_12_DECRYPT_NEEDED_OFFSET 0x00000030 |
| #define RX_MPDU_INFO_12_DECRYPT_NEEDED_LSB 9 |
| #define RX_MPDU_INFO_12_DECRYPT_NEEDED_MASK 0x00000200 |
| |
| /* Description RX_MPDU_INFO_12_DECAP_TYPE |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Used by the OLE during decapsulation. |
| |
| |
| |
| Indicates the decapsulation that HW will perform: |
| |
| |
| |
| <enum 0 RAW> No encapsulation |
| |
| <enum 1 Native_WiFi> |
| |
| <enum 2 Ethernet> Ethernet 2 (DIX) or 802.3 (uses |
| SNAP/LLC) |
| |
| <enum 3 802_3> Indicate Ethernet |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_12_DECAP_TYPE_OFFSET 0x00000030 |
| #define RX_MPDU_INFO_12_DECAP_TYPE_LSB 10 |
| #define RX_MPDU_INFO_12_DECAP_TYPE_MASK 0x00000c00 |
| |
| /* Description RX_MPDU_INFO_12_RX_INSERT_VLAN_C_TAG_PADDING |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Insert 4 byte of all zeros as VLAN tag if the rx payload |
| does not have VLAN. Used during decapsulation. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_12_RX_INSERT_VLAN_C_TAG_PADDING_OFFSET 0x00000030 |
| #define RX_MPDU_INFO_12_RX_INSERT_VLAN_C_TAG_PADDING_LSB 12 |
| #define RX_MPDU_INFO_12_RX_INSERT_VLAN_C_TAG_PADDING_MASK 0x00001000 |
| |
| /* Description RX_MPDU_INFO_12_RX_INSERT_VLAN_S_TAG_PADDING |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Insert 4 byte of all zeros as double VLAN tag if the rx |
| payload does not have VLAN. Used during |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_12_RX_INSERT_VLAN_S_TAG_PADDING_OFFSET 0x00000030 |
| #define RX_MPDU_INFO_12_RX_INSERT_VLAN_S_TAG_PADDING_LSB 13 |
| #define RX_MPDU_INFO_12_RX_INSERT_VLAN_S_TAG_PADDING_MASK 0x00002000 |
| |
| /* Description RX_MPDU_INFO_12_STRIP_VLAN_C_TAG_DECAP |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Strip the VLAN during decapsulation. Used by the OLE. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_12_STRIP_VLAN_C_TAG_DECAP_OFFSET 0x00000030 |
| #define RX_MPDU_INFO_12_STRIP_VLAN_C_TAG_DECAP_LSB 14 |
| #define RX_MPDU_INFO_12_STRIP_VLAN_C_TAG_DECAP_MASK 0x00004000 |
| |
| /* Description RX_MPDU_INFO_12_STRIP_VLAN_S_TAG_DECAP |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| Strip the double VLAN during decapsulation. Used by |
| the OLE. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_12_STRIP_VLAN_S_TAG_DECAP_OFFSET 0x00000030 |
| #define RX_MPDU_INFO_12_STRIP_VLAN_S_TAG_DECAP_LSB 15 |
| #define RX_MPDU_INFO_12_STRIP_VLAN_S_TAG_DECAP_MASK 0x00008000 |
| |
| /* Description RX_MPDU_INFO_12_PRE_DELIM_COUNT |
| |
| The number of delimiters before this MPDU. |
| |
| |
| |
| Note that this number is cleared at PPDU start. |
| |
| |
| |
| If this MPDU is the first received MPDU in the PPDU and |
| this MPDU gets filtered-in, this field will indicate the |
| number of delimiters located after the last MPDU in the |
| previous PPDU. |
| |
| |
| |
| If this MPDU is located after the first received MPDU in |
| an PPDU, this field will indicate the number of delimiters |
| located between the previous MPDU and this MPDU. |
| |
| |
| |
| In case of ndp or phy_err, this field will indicate the |
| number of delimiters located after the last MPDU in the |
| previous PPDU. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_12_PRE_DELIM_COUNT_OFFSET 0x00000030 |
| #define RX_MPDU_INFO_12_PRE_DELIM_COUNT_LSB 16 |
| #define RX_MPDU_INFO_12_PRE_DELIM_COUNT_MASK 0x0fff0000 |
| |
| /* Description RX_MPDU_INFO_12_AMPDU_FLAG |
| |
| When set, received frame was part of an A-MPDU. |
| |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_12_AMPDU_FLAG_OFFSET 0x00000030 |
| #define RX_MPDU_INFO_12_AMPDU_FLAG_LSB 28 |
| #define RX_MPDU_INFO_12_AMPDU_FLAG_MASK 0x10000000 |
| |
| /* Description RX_MPDU_INFO_12_BAR_FRAME |
| |
| In case of ndp or phy_err or AST_based_lookup_valid == |
| 0, this field will be set to 0 |
| |
| |
| |
| When set, received frame is a BAR frame |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_12_BAR_FRAME_OFFSET 0x00000030 |
| #define RX_MPDU_INFO_12_BAR_FRAME_LSB 29 |
| #define RX_MPDU_INFO_12_BAR_FRAME_MASK 0x20000000 |
| |
| /* Description RX_MPDU_INFO_12_RAW_MPDU |
| |
| Consumer: SW |
| |
| Producer: RXOLE |
| |
| |
| |
| RXPCU sets this field to 0 and RXOLE overwrites it. |
| |
| |
| |
| Set to 1 by RXOLE when it has not performed any 802.11 |
| to Ethernet/Natvie WiFi header conversion on this MPDU. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_12_RAW_MPDU_OFFSET 0x00000030 |
| #define RX_MPDU_INFO_12_RAW_MPDU_LSB 30 |
| #define RX_MPDU_INFO_12_RAW_MPDU_MASK 0x40000000 |
| |
| /* Description RX_MPDU_INFO_12_RESERVED_12 |
| |
| <legal 0> |
| */ |
| #define RX_MPDU_INFO_12_RESERVED_12_OFFSET 0x00000030 |
| #define RX_MPDU_INFO_12_RESERVED_12_LSB 31 |
| #define RX_MPDU_INFO_12_RESERVED_12_MASK 0x80000000 |
| |
| /* Description RX_MPDU_INFO_13_MPDU_LENGTH |
| |
| In case of ndp or phy_err this field will be set to 0 |
| |
| |
| |
| MPDU length before decapsulation. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_MPDU_LENGTH_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_MPDU_LENGTH_LSB 0 |
| #define RX_MPDU_INFO_13_MPDU_LENGTH_MASK 0x00003fff |
| |
| /* Description RX_MPDU_INFO_13_FIRST_MPDU |
| |
| See definition in RX attention descriptor |
| |
| |
| |
| In case of ndp or phy_err, this field will be set. Note |
| however that there will not actually be any data contents in |
| the MPDU. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_FIRST_MPDU_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_FIRST_MPDU_LSB 14 |
| #define RX_MPDU_INFO_13_FIRST_MPDU_MASK 0x00004000 |
| |
| /* Description RX_MPDU_INFO_13_MCAST_BCAST |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_MCAST_BCAST_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_MCAST_BCAST_LSB 15 |
| #define RX_MPDU_INFO_13_MCAST_BCAST_MASK 0x00008000 |
| |
| /* Description RX_MPDU_INFO_13_AST_INDEX_NOT_FOUND |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_AST_INDEX_NOT_FOUND_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_AST_INDEX_NOT_FOUND_LSB 16 |
| #define RX_MPDU_INFO_13_AST_INDEX_NOT_FOUND_MASK 0x00010000 |
| |
| /* Description RX_MPDU_INFO_13_AST_INDEX_TIMEOUT |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_AST_INDEX_TIMEOUT_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_AST_INDEX_TIMEOUT_LSB 17 |
| #define RX_MPDU_INFO_13_AST_INDEX_TIMEOUT_MASK 0x00020000 |
| |
| /* Description RX_MPDU_INFO_13_POWER_MGMT |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_POWER_MGMT_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_POWER_MGMT_LSB 18 |
| #define RX_MPDU_INFO_13_POWER_MGMT_MASK 0x00040000 |
| |
| /* Description RX_MPDU_INFO_13_NON_QOS |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 1 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_NON_QOS_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_NON_QOS_LSB 19 |
| #define RX_MPDU_INFO_13_NON_QOS_MASK 0x00080000 |
| |
| /* Description RX_MPDU_INFO_13_NULL_DATA |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_NULL_DATA_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_NULL_DATA_LSB 20 |
| #define RX_MPDU_INFO_13_NULL_DATA_MASK 0x00100000 |
| |
| /* Description RX_MPDU_INFO_13_MGMT_TYPE |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_MGMT_TYPE_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_MGMT_TYPE_LSB 21 |
| #define RX_MPDU_INFO_13_MGMT_TYPE_MASK 0x00200000 |
| |
| /* Description RX_MPDU_INFO_13_CTRL_TYPE |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_CTRL_TYPE_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_CTRL_TYPE_LSB 22 |
| #define RX_MPDU_INFO_13_CTRL_TYPE_MASK 0x00400000 |
| |
| /* Description RX_MPDU_INFO_13_MORE_DATA |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_MORE_DATA_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_MORE_DATA_LSB 23 |
| #define RX_MPDU_INFO_13_MORE_DATA_MASK 0x00800000 |
| |
| /* Description RX_MPDU_INFO_13_EOSP |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_EOSP_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_EOSP_LSB 24 |
| #define RX_MPDU_INFO_13_EOSP_MASK 0x01000000 |
| |
| /* Description RX_MPDU_INFO_13_FRAGMENT_FLAG |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_FRAGMENT_FLAG_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_FRAGMENT_FLAG_LSB 25 |
| #define RX_MPDU_INFO_13_FRAGMENT_FLAG_MASK 0x02000000 |
| |
| /* Description RX_MPDU_INFO_13_ORDER |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_ORDER_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_ORDER_LSB 26 |
| #define RX_MPDU_INFO_13_ORDER_MASK 0x04000000 |
| |
| /* Description RX_MPDU_INFO_13_U_APSD_TRIGGER |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_U_APSD_TRIGGER_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_U_APSD_TRIGGER_LSB 27 |
| #define RX_MPDU_INFO_13_U_APSD_TRIGGER_MASK 0x08000000 |
| |
| /* Description RX_MPDU_INFO_13_ENCRYPT_REQUIRED |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_ENCRYPT_REQUIRED_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_ENCRYPT_REQUIRED_LSB 28 |
| #define RX_MPDU_INFO_13_ENCRYPT_REQUIRED_MASK 0x10000000 |
| |
| /* Description RX_MPDU_INFO_13_DIRECTED |
| |
| In case of ndp or phy_err or Phy_err_during_mpdu_header |
| this field will be set to 0 |
| |
| |
| |
| See definition in RX attention descriptor |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_DIRECTED_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_DIRECTED_LSB 29 |
| #define RX_MPDU_INFO_13_DIRECTED_MASK 0x20000000 |
| |
| /* Description RX_MPDU_INFO_13_AMSDU_PRESENT |
| |
| Field only valid when Mpdu_qos_control_valid is set |
| |
| |
| |
| The 'amsdu_present' bit within the QoS control field of |
| the MPDU |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_13_AMSDU_PRESENT_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_AMSDU_PRESENT_LSB 30 |
| #define RX_MPDU_INFO_13_AMSDU_PRESENT_MASK 0x40000000 |
| |
| /* Description RX_MPDU_INFO_13_RESERVED_13 |
| |
| <legal 0> |
| */ |
| #define RX_MPDU_INFO_13_RESERVED_13_OFFSET 0x00000034 |
| #define RX_MPDU_INFO_13_RESERVED_13_LSB 31 |
| #define RX_MPDU_INFO_13_RESERVED_13_MASK 0x80000000 |
| |
| /* Description RX_MPDU_INFO_14_MPDU_FRAME_CONTROL_FIELD |
| |
| Field only valid when Mpdu_frame_control_valid is set |
| |
| |
| |
| The frame control field of this received MPDU. |
| |
| |
| |
| Field only valid when Ndp_frame and phy_err are NOT set |
| |
| |
| |
| Bytes 0 + 1 of the received MPDU |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_14_MPDU_FRAME_CONTROL_FIELD_OFFSET 0x00000038 |
| #define RX_MPDU_INFO_14_MPDU_FRAME_CONTROL_FIELD_LSB 0 |
| #define RX_MPDU_INFO_14_MPDU_FRAME_CONTROL_FIELD_MASK 0x0000ffff |
| |
| /* Description RX_MPDU_INFO_14_MPDU_DURATION_FIELD |
| |
| Field only valid when Mpdu_duration_valid is set |
| |
| |
| |
| The duration field of this received MPDU. |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_14_MPDU_DURATION_FIELD_OFFSET 0x00000038 |
| #define RX_MPDU_INFO_14_MPDU_DURATION_FIELD_LSB 16 |
| #define RX_MPDU_INFO_14_MPDU_DURATION_FIELD_MASK 0xffff0000 |
| |
| /* Description RX_MPDU_INFO_15_MAC_ADDR_AD1_31_0 |
| |
| Field only valid when mac_addr_ad1_valid is set |
| |
| |
| |
| The Least Significant 4 bytes of the Received Frames MAC |
| Address AD1 |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_15_MAC_ADDR_AD1_31_0_OFFSET 0x0000003c |
| #define RX_MPDU_INFO_15_MAC_ADDR_AD1_31_0_LSB 0 |
| #define RX_MPDU_INFO_15_MAC_ADDR_AD1_31_0_MASK 0xffffffff |
| |
| /* Description RX_MPDU_INFO_16_MAC_ADDR_AD1_47_32 |
| |
| Field only valid when mac_addr_ad1_valid is set |
| |
| |
| |
| The 2 most significant bytes of the Received Frames MAC |
| Address AD1 |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_16_MAC_ADDR_AD1_47_32_OFFSET 0x00000040 |
| #define RX_MPDU_INFO_16_MAC_ADDR_AD1_47_32_LSB 0 |
| #define RX_MPDU_INFO_16_MAC_ADDR_AD1_47_32_MASK 0x0000ffff |
| |
| /* Description RX_MPDU_INFO_16_MAC_ADDR_AD2_15_0 |
| |
| Field only valid when mac_addr_ad2_valid is set |
| |
| |
| |
| The Least Significant 2 bytes of the Received Frames MAC |
| Address AD2 |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_16_MAC_ADDR_AD2_15_0_OFFSET 0x00000040 |
| #define RX_MPDU_INFO_16_MAC_ADDR_AD2_15_0_LSB 16 |
| #define RX_MPDU_INFO_16_MAC_ADDR_AD2_15_0_MASK 0xffff0000 |
| |
| /* Description RX_MPDU_INFO_17_MAC_ADDR_AD2_47_16 |
| |
| Field only valid when mac_addr_ad2_valid is set |
| |
| |
| |
| The 4 most significant bytes of the Received Frames MAC |
| Address AD2 |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_17_MAC_ADDR_AD2_47_16_OFFSET 0x00000044 |
| #define RX_MPDU_INFO_17_MAC_ADDR_AD2_47_16_LSB 0 |
| #define RX_MPDU_INFO_17_MAC_ADDR_AD2_47_16_MASK 0xffffffff |
| |
| /* Description RX_MPDU_INFO_18_MAC_ADDR_AD3_31_0 |
| |
| Field only valid when mac_addr_ad3_valid is set |
| |
| |
| |
| The Least Significant 4 bytes of the Received Frames MAC |
| Address AD3 |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_18_MAC_ADDR_AD3_31_0_OFFSET 0x00000048 |
| #define RX_MPDU_INFO_18_MAC_ADDR_AD3_31_0_LSB 0 |
| #define RX_MPDU_INFO_18_MAC_ADDR_AD3_31_0_MASK 0xffffffff |
| |
| /* Description RX_MPDU_INFO_19_MAC_ADDR_AD3_47_32 |
| |
| Field only valid when mac_addr_ad3_valid is set |
| |
| |
| |
| The 2 most significant bytes of the Received Frames MAC |
| Address AD3 |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_19_MAC_ADDR_AD3_47_32_OFFSET 0x0000004c |
| #define RX_MPDU_INFO_19_MAC_ADDR_AD3_47_32_LSB 0 |
| #define RX_MPDU_INFO_19_MAC_ADDR_AD3_47_32_MASK 0x0000ffff |
| |
| /* Description RX_MPDU_INFO_19_MPDU_SEQUENCE_CONTROL_FIELD |
| |
| |
| |
| |
| The sequence control field of the MPDU |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_19_MPDU_SEQUENCE_CONTROL_FIELD_OFFSET 0x0000004c |
| #define RX_MPDU_INFO_19_MPDU_SEQUENCE_CONTROL_FIELD_LSB 16 |
| #define RX_MPDU_INFO_19_MPDU_SEQUENCE_CONTROL_FIELD_MASK 0xffff0000 |
| |
| /* Description RX_MPDU_INFO_20_MAC_ADDR_AD4_31_0 |
| |
| Field only valid when mac_addr_ad4_valid is set |
| |
| |
| |
| The Least Significant 4 bytes of the Received Frames MAC |
| Address AD4 |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_20_MAC_ADDR_AD4_31_0_OFFSET 0x00000050 |
| #define RX_MPDU_INFO_20_MAC_ADDR_AD4_31_0_LSB 0 |
| #define RX_MPDU_INFO_20_MAC_ADDR_AD4_31_0_MASK 0xffffffff |
| |
| /* Description RX_MPDU_INFO_21_MAC_ADDR_AD4_47_32 |
| |
| Field only valid when mac_addr_ad4_valid is set |
| |
| |
| |
| The 2 most significant bytes of the Received Frames MAC |
| Address AD4 |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_21_MAC_ADDR_AD4_47_32_OFFSET 0x00000054 |
| #define RX_MPDU_INFO_21_MAC_ADDR_AD4_47_32_LSB 0 |
| #define RX_MPDU_INFO_21_MAC_ADDR_AD4_47_32_MASK 0x0000ffff |
| |
| /* Description RX_MPDU_INFO_21_MPDU_QOS_CONTROL_FIELD |
| |
| Field only valid when mpdu_qos_control_valid is set |
| |
| |
| |
| The sequence control field of the MPDU |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_21_MPDU_QOS_CONTROL_FIELD_OFFSET 0x00000054 |
| #define RX_MPDU_INFO_21_MPDU_QOS_CONTROL_FIELD_LSB 16 |
| #define RX_MPDU_INFO_21_MPDU_QOS_CONTROL_FIELD_MASK 0xffff0000 |
| |
| /* Description RX_MPDU_INFO_22_MPDU_HT_CONTROL_FIELD |
| |
| Field only valid when mpdu_qos_control_valid is set |
| |
| |
| |
| The HT control field of the MPDU |
| |
| <legal all> |
| */ |
| #define RX_MPDU_INFO_22_MPDU_HT_CONTROL_FIELD_OFFSET 0x00000058 |
| #define RX_MPDU_INFO_22_MPDU_HT_CONTROL_FIELD_LSB 0 |
| #define RX_MPDU_INFO_22_MPDU_HT_CONTROL_FIELD_MASK 0xffffffff |
| |
| |
| #endif // _RX_MPDU_INFO_H_ |