| /* |
| * Copyright (c) 2020 The Linux Foundation. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| // |
| // DO NOT EDIT! This file is automatically generated |
| // These definitions are tied to a particular hardware layout |
| |
| |
| #ifndef _RXPCU_PPDU_END_INFO_H_ |
| #define _RXPCU_PPDU_END_INFO_H_ |
| #if !defined(__ASSEMBLER__) |
| #endif |
| |
| #include "phyrx_abort_request_info.h" |
| #include "macrx_abort_request_info.h" |
| |
| // ################ START SUMMARY ################# |
| // |
| // Dword Fields |
| // 0 wb_timestamp_lower_32[31:0] |
| // 1 wb_timestamp_upper_32[31:0] |
| // 2 rx_antenna[23:0], tx_ht_vht_ack[24], unsupported_mu_nc[25], otp_txbf_disable[26], previous_tlv_corrupted[27], phyrx_abort_request_info_valid[28], macrx_abort_request_info_valid[29], reserved[31:30] |
| // 3 coex_bt_tx_from_start_of_rx[0], coex_bt_tx_after_start_of_rx[1], coex_wan_tx_from_start_of_rx[2], coex_wan_tx_after_start_of_rx[3], coex_wlan_tx_from_start_of_rx[4], coex_wlan_tx_after_start_of_rx[5], mpdu_delimiter_errors_seen[6], ftm_tm[8:7], dialog_token[16:9], follow_up_dialog_token[24:17], bb_captured_channel[25], bb_captured_reason[28:26], bb_captured_timeout[29], reserved_3[31:30] |
| // 4 before_mpdu_count_passing_fcs[9:0], before_mpdu_count_failing_fcs[19:10], after_mpdu_count_passing_fcs[29:20], reserved_4[31:30] |
| // 5 after_mpdu_count_failing_fcs[9:0], reserved_5[31:10] |
| // 6 phy_timestamp_tx_lower_32[31:0] |
| // 7 phy_timestamp_tx_upper_32[31:0] |
| // 8 bb_length[15:0], bb_data[16], reserved_8[19:17], first_bt_broadcast_status_details[31:20] |
| // 9 rx_ppdu_duration[23:0], reserved_9[31:24] |
| // 10 ast_index[15:0], ast_index_valid[16], reserved_10[19:17], second_bt_broadcast_status_details[31:20] |
| // 11 struct phyrx_abort_request_info phyrx_abort_request_info_details; |
| // 12 struct macrx_abort_request_info macrx_abort_request_info_details; |
| // 13 rx_ppdu_end_marker[31:0] |
| // |
| // ################ END SUMMARY ################# |
| |
| #define NUM_OF_DWORDS_RXPCU_PPDU_END_INFO 14 |
| |
| struct rxpcu_ppdu_end_info { |
| uint32_t wb_timestamp_lower_32 : 32; //[31:0] |
| uint32_t wb_timestamp_upper_32 : 32; //[31:0] |
| uint32_t rx_antenna : 24, //[23:0] |
| tx_ht_vht_ack : 1, //[24] |
| unsupported_mu_nc : 1, //[25] |
| otp_txbf_disable : 1, //[26] |
| previous_tlv_corrupted : 1, //[27] |
| phyrx_abort_request_info_valid : 1, //[28] |
| macrx_abort_request_info_valid : 1, //[29] |
| reserved : 2; //[31:30] |
| uint32_t coex_bt_tx_from_start_of_rx : 1, //[0] |
| coex_bt_tx_after_start_of_rx : 1, //[1] |
| coex_wan_tx_from_start_of_rx : 1, //[2] |
| coex_wan_tx_after_start_of_rx : 1, //[3] |
| coex_wlan_tx_from_start_of_rx : 1, //[4] |
| coex_wlan_tx_after_start_of_rx : 1, //[5] |
| mpdu_delimiter_errors_seen : 1, //[6] |
| ftm_tm : 2, //[8:7] |
| dialog_token : 8, //[16:9] |
| follow_up_dialog_token : 8, //[24:17] |
| bb_captured_channel : 1, //[25] |
| bb_captured_reason : 3, //[28:26] |
| bb_captured_timeout : 1, //[29] |
| reserved_3 : 2; //[31:30] |
| uint32_t before_mpdu_count_passing_fcs : 10, //[9:0] |
| before_mpdu_count_failing_fcs : 10, //[19:10] |
| after_mpdu_count_passing_fcs : 10, //[29:20] |
| reserved_4 : 2; //[31:30] |
| uint32_t after_mpdu_count_failing_fcs : 10, //[9:0] |
| reserved_5 : 22; //[31:10] |
| uint32_t phy_timestamp_tx_lower_32 : 32; //[31:0] |
| uint32_t phy_timestamp_tx_upper_32 : 32; //[31:0] |
| uint32_t bb_length : 16, //[15:0] |
| bb_data : 1, //[16] |
| reserved_8 : 3, //[19:17] |
| first_bt_broadcast_status_details: 12; //[31:20] |
| uint32_t rx_ppdu_duration : 24, //[23:0] |
| reserved_9 : 8; //[31:24] |
| uint32_t ast_index : 16, //[15:0] |
| ast_index_valid : 1, //[16] |
| reserved_10 : 3, //[19:17] |
| second_bt_broadcast_status_details: 12; //[31:20] |
| struct phyrx_abort_request_info phyrx_abort_request_info_details; |
| struct macrx_abort_request_info macrx_abort_request_info_details; |
| uint16_t pre_bt_broadcast_status_details : 12, //[27:16] |
| reserved_12a : 4; //[31:28] |
| uint32_t rx_ppdu_end_marker : 32; //[31:0] |
| }; |
| |
| /* |
| |
| wb_timestamp_lower_32 |
| |
| WLAN/BT timestamp is a 1 usec resolution timestamp which |
| does not get updated based on receive beacon like TSF. The |
| same rules for capturing tsf_timestamp are used to capture |
| the wb_timestamp. This field represents the lower 32 bits of |
| the 64-bit timestamp |
| |
| wb_timestamp_upper_32 |
| |
| WLAN/BT timestamp is a 1 usec resolution timestamp which |
| does not get updated based on receive beacon like TSF. The |
| same rules for capturing tsf_timestamp are used to capture |
| the wb_timestamp. This field represents the upper 32 bits of |
| the 64-bit timestamp |
| |
| rx_antenna |
| |
| Receive antenna value ??? |
| |
| tx_ht_vht_ack |
| |
| Indicates that a HT or VHT Ack/BA frame was transmitted |
| in response to this receive packet. |
| |
| unsupported_mu_nc |
| |
| Set if MU Nc > 2 in received NDPA. |
| |
| If this bit is set, even though AID and BSSID are |
| matched, MAC doesn't send tx_expect_ndp to PHY, because MU |
| Nc > 2 is not supported in Helium. |
| |
| otp_txbf_disable |
| |
| Set if either OTP_SUBFEE_DISABLE or OTP_TXBF_DISABLE is |
| set and if RXPU receives directed NDPA frame. Then, RXPCU |
| should not send TX_EXPECT_NDP TLV to SW but set this bit to |
| inform SW. |
| |
| previous_tlv_corrupted |
| |
| When set, the TLV preceding this RXPCU_END_INFO TLV |
| within the RX_PPDU_END TLV, is corrupted. Not the entire TLV |
| was received.... Likely due to an abort scenario... If abort |
| is to blame, see the abort data datastructure for details. |
| |
| <legal all> |
| |
| phyrx_abort_request_info_valid |
| |
| When set, the PHY sent an PHYRX_ABORT_REQUEST TLV to |
| RXPCU. The abort fields embedded in this TLV contain valid |
| info. |
| |
| <legal all> |
| |
| macrx_abort_request_info_valid |
| |
| When set, the MAC sent an MACRX_ABORT_REQUEST TLV to |
| PHYRX. The abort fields embedded in this TLV contain valid |
| info. |
| |
| <legal all> |
| |
| reserved |
| |
| <legal 0> |
| |
| coex_bt_tx_from_start_of_rx |
| |
| Set when BT TX was ongoing when WLAN RX started |
| |
| coex_bt_tx_after_start_of_rx |
| |
| |
| coex_wan_tx_from_start_of_rx |
| |
| Set when WAN TX was ongoing when WLAN RX started |
| |
| coex_wan_tx_after_start_of_rx |
| |
| Set when WAN TX started while WLAN RX was already |
| ongoing |
| |
| coex_wlan_tx_from_start_of_rx |
| |
| Set when other WLAN TX was ongoing when WLAN RX started |
| |
| coex_wlan_tx_after_start_of_rx |
| |
| Set when other WLAN TX started while WLAN RX was already |
| ongoing |
| |
| mpdu_delimiter_errors_seen |
| |
| When set, MPDU delimiter errors have been detected |
| during this PPDU reception |
| |
| ftm_tm |
| |
| Indicate the timestamp is for the FTM or TM frame |
| |
| |
| |
| 0: non TM or FTM frame |
| |
| 1: FTM frame |
| |
| 2: TM frame |
| |
| 3: reserved |
| |
| <legal all> |
| |
| dialog_token |
| |
| The dialog token in the FTM or TM frame. Only valid when |
| the FTM is set. Clear to 254 for a non-FTM frame |
| |
| <legal all> |
| |
| follow_up_dialog_token |
| |
| The follow up dialog token in the FTM or TM frame. Only |
| valid when the FTM is set. Clear to 0 for a non-FTM frame, |
| The follow up dialog token in the FTM frame. Only valid when |
| the FTM is set. Clear to 255 for a non-FTM frame<legal all> |
| |
| bb_captured_channel |
| |
| Set by RXPCU when MACRX_FREEZE_CAPTURE_CHANNEL TLV is |
| sent to PHY, FW check it to correlate current PPDU TLVs with |
| uploaded channel information. |
| |
| |
| |
| <legal all> |
| |
| bb_captured_reason |
| |
| Copy capture_reason of MACRX_FREEZE_CAPTURE_CHANNEL TLV |
| to here for FW usage. Valid when bb_captured_channel or |
| bb_captured_timeout is set. |
| |
| |
| |
| This field indicates why the MAC asked to capture the |
| channel |
| |
| <enum 0 freeze_reason_TM> |
| |
| <enum 1 freeze_reason_FTM> |
| |
| <enum 2 freeze_reason_ACK_resp_to_TM_FTM> |
| |
| <enum 3 freeze_reason_TA_RA_TYPE_FILTER> |
| |
| <enum 4 freeze_reason_NDPA_NDP> |
| |
| <enum 5 freeze_reason_ALL_PACKET> |
| |
| |
| |
| <legal 0-5> |
| |
| bb_captured_timeout |
| |
| Set by RxPCU to indicate channel capture condition is |
| meet, but MACRX_FREEZE_CAPTURE_CHANNEL is not sent to PHY |
| due to AST long delay, which means the rx_frame_falling edge |
| to FREEZE TLV ready time exceed the threshold time defined |
| by RXPCU register FREEZE_TLV_DELAY_CNT_THRESH. |
| |
| Bb_captured_reason is still valid in this case. |
| |
| |
| |
| <legal all> |
| |
| reserved_3 |
| |
| <legal 0> |
| |
| before_mpdu_count_passing_fcs |
| |
| Number of MPDUs received in this PPDU that passed the |
| FCS check before the Coex TX started |
| |
| |
| |
| The counter saturates at 0x3FF. |
| |
| <legal all> |
| |
| before_mpdu_count_failing_fcs |
| |
| Number of MPDUs received in this PPDU that failed the |
| FCS check before the Coex TX started |
| |
| |
| |
| The counter saturates at 0x3FF. |
| |
| <legal all> |
| |
| after_mpdu_count_passing_fcs |
| |
| Number of MPDUs received in this PPDU that passed the |
| FCS check after the moment the Coex TX started |
| |
| |
| |
| (Note: The partially received MPDU when the COEX tx |
| start event came in falls in the after category) |
| |
| |
| |
| The counter saturates at 0x3FF. |
| |
| <legal all> |
| |
| reserved_4 |
| |
| <legal 0> |
| |
| after_mpdu_count_failing_fcs |
| |
| Number of MPDUs received in this PPDU that failed the |
| FCS check after the moment the Coex TX started |
| |
| |
| |
| (Note: The partially received MPDU when the COEX tx |
| start event came in falls in the after category) |
| |
| |
| |
| The counter saturates at 0x3FF. |
| |
| <legal all> |
| |
| reserved_5 |
| |
| <legal 0> |
| |
| phy_timestamp_tx_lower_32 |
| |
| The PHY timestamp in the AMPI of the most recent rising |
| edge (TODO: of what ???) after the TX_PHY_DESC. This field |
| indicates the lower 32 bits of the timestamp |
| |
| phy_timestamp_tx_upper_32 |
| |
| The PHY timestamp in the AMPI of the most recent rising |
| edge (TODO: of what ???) after the TX_PHY_DESC. This field |
| indicates the upper 32 bits of the timestamp |
| |
| bb_length |
| |
| Indicates the number of bytes of baseband information |
| for PPDUs where the BB descriptor preamble type is 0x80 to |
| 0xFF which indicates that this is not a normal PPDU but |
| rather contains baseband debug information. |
| |
| TODO: Is this still needed ??? |
| |
| bb_data |
| |
| Indicates that BB data associated with this PPDU will |
| exist in the receive buffer. The exact contents of this BB |
| data can be found by decoding the BB TLV in the buffer |
| associated with the BB data. See vector_fragment in the |
| Helium_mac_phy_interface.docx |
| |
| reserved_8 |
| |
| Reserved: HW should fill with 0, FW should ignore. |
| |
| first_bt_broadcast_status_details |
| |
| Same contents as field bt_broadcast_status_details for |
| the first received COEX_STATUS_BROADCAST tlv during this |
| PPDU reception. |
| |
| |
| |
| If no COEX_STATUS_BROADCAST tlv is received during this |
| PPDU reception, this field will be set to 0 |
| |
| |
| |
| |
| |
| For detailed info see doc: TBD |
| |
| <legal all> |
| |
| rx_ppdu_duration |
| |
| The length of this PPDU reception in us |
| |
| reserved_9 |
| |
| <legal 0> |
| |
| ast_index |
| |
| The AST index of the receive Ack/BA. This information |
| is provided from the TXPCU to the RXPCU for receive Ack/BA |
| for implicit beamforming. |
| |
| <legal all> |
| |
| ast_index_valid |
| |
| Indicates that ast_index is valid. Should only be set |
| for receive Ack/BA where single stream implicit sounding is |
| captured. |
| |
| reserved_10 |
| |
| <legal 0> |
| |
| second_bt_broadcast_status_details |
| |
| Same contents as field bt_broadcast_status_details for |
| the second received COEX_STATUS_BROADCAST tlv during this |
| PPDU reception. |
| |
| |
| |
| If no second COEX_STATUS_BROADCAST tlv is received |
| during this PPDU reception, this field will be set to 0 |
| |
| |
| |
| |
| |
| For detailed info see doc: TBD |
| |
| <legal all> |
| |
| struct phyrx_abort_request_info phyrx_abort_request_info_details |
| |
| Field only valid when Phyrx_abort_request_info_valid is |
| set |
| |
| The reason why PHY generated an abort request |
| |
| struct macrx_abort_request_info macrx_abort_request_info_details |
| |
| Field only valid when macrx_abort_request_info_valid is |
| set |
| |
| The reason why MACRX generated an abort request |
| |
| rx_ppdu_end_marker |
| |
| Field used by SW to double check that their structure |
| alignment is in sync with what HW has done. |
| |
| <legal 0xAABBCCDD> |
| */ |
| |
| |
| /* Description RXPCU_PPDU_END_INFO_0_WB_TIMESTAMP_LOWER_32 |
| |
| WLAN/BT timestamp is a 1 usec resolution timestamp which |
| does not get updated based on receive beacon like TSF. The |
| same rules for capturing tsf_timestamp are used to capture |
| the wb_timestamp. This field represents the lower 32 bits of |
| the 64-bit timestamp |
| */ |
| #define RXPCU_PPDU_END_INFO_0_WB_TIMESTAMP_LOWER_32_OFFSET 0x00000000 |
| #define RXPCU_PPDU_END_INFO_0_WB_TIMESTAMP_LOWER_32_LSB 0 |
| #define RXPCU_PPDU_END_INFO_0_WB_TIMESTAMP_LOWER_32_MASK 0xffffffff |
| |
| /* Description RXPCU_PPDU_END_INFO_1_WB_TIMESTAMP_UPPER_32 |
| |
| WLAN/BT timestamp is a 1 usec resolution timestamp which |
| does not get updated based on receive beacon like TSF. The |
| same rules for capturing tsf_timestamp are used to capture |
| the wb_timestamp. This field represents the upper 32 bits of |
| the 64-bit timestamp |
| */ |
| #define RXPCU_PPDU_END_INFO_1_WB_TIMESTAMP_UPPER_32_OFFSET 0x00000004 |
| #define RXPCU_PPDU_END_INFO_1_WB_TIMESTAMP_UPPER_32_LSB 0 |
| #define RXPCU_PPDU_END_INFO_1_WB_TIMESTAMP_UPPER_32_MASK 0xffffffff |
| |
| /* Description RXPCU_PPDU_END_INFO_2_RX_ANTENNA |
| |
| Receive antenna value ??? |
| */ |
| #define RXPCU_PPDU_END_INFO_2_RX_ANTENNA_OFFSET 0x00000008 |
| #define RXPCU_PPDU_END_INFO_2_RX_ANTENNA_LSB 0 |
| #define RXPCU_PPDU_END_INFO_2_RX_ANTENNA_MASK 0x00ffffff |
| |
| /* Description RXPCU_PPDU_END_INFO_2_TX_HT_VHT_ACK |
| |
| Indicates that a HT or VHT Ack/BA frame was transmitted |
| in response to this receive packet. |
| */ |
| #define RXPCU_PPDU_END_INFO_2_TX_HT_VHT_ACK_OFFSET 0x00000008 |
| #define RXPCU_PPDU_END_INFO_2_TX_HT_VHT_ACK_LSB 24 |
| #define RXPCU_PPDU_END_INFO_2_TX_HT_VHT_ACK_MASK 0x01000000 |
| |
| /* Description RXPCU_PPDU_END_INFO_2_UNSUPPORTED_MU_NC |
| |
| Set if MU Nc > 2 in received NDPA. |
| |
| If this bit is set, even though AID and BSSID are |
| matched, MAC doesn't send tx_expect_ndp to PHY, because MU |
| Nc > 2 is not supported in Helium. |
| */ |
| #define RXPCU_PPDU_END_INFO_2_UNSUPPORTED_MU_NC_OFFSET 0x00000008 |
| #define RXPCU_PPDU_END_INFO_2_UNSUPPORTED_MU_NC_LSB 25 |
| #define RXPCU_PPDU_END_INFO_2_UNSUPPORTED_MU_NC_MASK 0x02000000 |
| |
| /* Description RXPCU_PPDU_END_INFO_2_OTP_TXBF_DISABLE |
| |
| Set if either OTP_SUBFEE_DISABLE or OTP_TXBF_DISABLE is |
| set and if RXPU receives directed NDPA frame. Then, RXPCU |
| should not send TX_EXPECT_NDP TLV to SW but set this bit to |
| inform SW. |
| */ |
| #define RXPCU_PPDU_END_INFO_2_OTP_TXBF_DISABLE_OFFSET 0x00000008 |
| #define RXPCU_PPDU_END_INFO_2_OTP_TXBF_DISABLE_LSB 26 |
| #define RXPCU_PPDU_END_INFO_2_OTP_TXBF_DISABLE_MASK 0x04000000 |
| |
| /* Description RXPCU_PPDU_END_INFO_2_PREVIOUS_TLV_CORRUPTED |
| |
| When set, the TLV preceding this RXPCU_END_INFO TLV |
| within the RX_PPDU_END TLV, is corrupted. Not the entire TLV |
| was received.... Likely due to an abort scenario... If abort |
| is to blame, see the abort data datastructure for details. |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_2_PREVIOUS_TLV_CORRUPTED_OFFSET 0x00000008 |
| #define RXPCU_PPDU_END_INFO_2_PREVIOUS_TLV_CORRUPTED_LSB 27 |
| #define RXPCU_PPDU_END_INFO_2_PREVIOUS_TLV_CORRUPTED_MASK 0x08000000 |
| |
| /* Description RXPCU_PPDU_END_INFO_2_PHYRX_ABORT_REQUEST_INFO_VALID |
| |
| When set, the PHY sent an PHYRX_ABORT_REQUEST TLV to |
| RXPCU. The abort fields embedded in this TLV contain valid |
| info. |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_2_PHYRX_ABORT_REQUEST_INFO_VALID_OFFSET 0x00000008 |
| #define RXPCU_PPDU_END_INFO_2_PHYRX_ABORT_REQUEST_INFO_VALID_LSB 28 |
| #define RXPCU_PPDU_END_INFO_2_PHYRX_ABORT_REQUEST_INFO_VALID_MASK 0x10000000 |
| |
| /* Description RXPCU_PPDU_END_INFO_2_MACRX_ABORT_REQUEST_INFO_VALID |
| |
| When set, the MAC sent an MACRX_ABORT_REQUEST TLV to |
| PHYRX. The abort fields embedded in this TLV contain valid |
| info. |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_2_MACRX_ABORT_REQUEST_INFO_VALID_OFFSET 0x00000008 |
| #define RXPCU_PPDU_END_INFO_2_MACRX_ABORT_REQUEST_INFO_VALID_LSB 29 |
| #define RXPCU_PPDU_END_INFO_2_MACRX_ABORT_REQUEST_INFO_VALID_MASK 0x20000000 |
| |
| /* Description RXPCU_PPDU_END_INFO_2_RESERVED |
| |
| <legal 0> |
| */ |
| #define RXPCU_PPDU_END_INFO_2_RESERVED_OFFSET 0x00000008 |
| #define RXPCU_PPDU_END_INFO_2_RESERVED_LSB 30 |
| #define RXPCU_PPDU_END_INFO_2_RESERVED_MASK 0xc0000000 |
| |
| /* Description RXPCU_PPDU_END_INFO_3_COEX_BT_TX_FROM_START_OF_RX |
| |
| Set when BT TX was ongoing when WLAN RX started |
| */ |
| #define RXPCU_PPDU_END_INFO_3_COEX_BT_TX_FROM_START_OF_RX_OFFSET 0x0000000c |
| #define RXPCU_PPDU_END_INFO_3_COEX_BT_TX_FROM_START_OF_RX_LSB 0 |
| #define RXPCU_PPDU_END_INFO_3_COEX_BT_TX_FROM_START_OF_RX_MASK 0x00000001 |
| |
| /* Description RXPCU_PPDU_END_INFO_3_COEX_BT_TX_AFTER_START_OF_RX |
| |
| */ |
| #define RXPCU_PPDU_END_INFO_3_COEX_BT_TX_AFTER_START_OF_RX_OFFSET 0x0000000c |
| #define RXPCU_PPDU_END_INFO_3_COEX_BT_TX_AFTER_START_OF_RX_LSB 1 |
| #define RXPCU_PPDU_END_INFO_3_COEX_BT_TX_AFTER_START_OF_RX_MASK 0x00000002 |
| |
| /* Description RXPCU_PPDU_END_INFO_3_COEX_WAN_TX_FROM_START_OF_RX |
| |
| Set when WAN TX was ongoing when WLAN RX started |
| */ |
| #define RXPCU_PPDU_END_INFO_3_COEX_WAN_TX_FROM_START_OF_RX_OFFSET 0x0000000c |
| #define RXPCU_PPDU_END_INFO_3_COEX_WAN_TX_FROM_START_OF_RX_LSB 2 |
| #define RXPCU_PPDU_END_INFO_3_COEX_WAN_TX_FROM_START_OF_RX_MASK 0x00000004 |
| |
| /* Description RXPCU_PPDU_END_INFO_3_COEX_WAN_TX_AFTER_START_OF_RX |
| |
| Set when WAN TX started while WLAN RX was already |
| ongoing |
| */ |
| #define RXPCU_PPDU_END_INFO_3_COEX_WAN_TX_AFTER_START_OF_RX_OFFSET 0x0000000c |
| #define RXPCU_PPDU_END_INFO_3_COEX_WAN_TX_AFTER_START_OF_RX_LSB 3 |
| #define RXPCU_PPDU_END_INFO_3_COEX_WAN_TX_AFTER_START_OF_RX_MASK 0x00000008 |
| |
| /* Description RXPCU_PPDU_END_INFO_3_COEX_WLAN_TX_FROM_START_OF_RX |
| |
| Set when other WLAN TX was ongoing when WLAN RX started |
| */ |
| #define RXPCU_PPDU_END_INFO_3_COEX_WLAN_TX_FROM_START_OF_RX_OFFSET 0x0000000c |
| #define RXPCU_PPDU_END_INFO_3_COEX_WLAN_TX_FROM_START_OF_RX_LSB 4 |
| #define RXPCU_PPDU_END_INFO_3_COEX_WLAN_TX_FROM_START_OF_RX_MASK 0x00000010 |
| |
| /* Description RXPCU_PPDU_END_INFO_3_COEX_WLAN_TX_AFTER_START_OF_RX |
| |
| Set when other WLAN TX started while WLAN RX was already |
| ongoing |
| */ |
| #define RXPCU_PPDU_END_INFO_3_COEX_WLAN_TX_AFTER_START_OF_RX_OFFSET 0x0000000c |
| #define RXPCU_PPDU_END_INFO_3_COEX_WLAN_TX_AFTER_START_OF_RX_LSB 5 |
| #define RXPCU_PPDU_END_INFO_3_COEX_WLAN_TX_AFTER_START_OF_RX_MASK 0x00000020 |
| |
| /* Description RXPCU_PPDU_END_INFO_3_MPDU_DELIMITER_ERRORS_SEEN |
| |
| When set, MPDU delimiter errors have been detected |
| during this PPDU reception |
| */ |
| #define RXPCU_PPDU_END_INFO_3_MPDU_DELIMITER_ERRORS_SEEN_OFFSET 0x0000000c |
| #define RXPCU_PPDU_END_INFO_3_MPDU_DELIMITER_ERRORS_SEEN_LSB 6 |
| #define RXPCU_PPDU_END_INFO_3_MPDU_DELIMITER_ERRORS_SEEN_MASK 0x00000040 |
| |
| /* Description RXPCU_PPDU_END_INFO_3_FTM_TM |
| |
| Indicate the timestamp is for the FTM or TM frame |
| |
| |
| |
| 0: non TM or FTM frame |
| |
| 1: FTM frame |
| |
| 2: TM frame |
| |
| 3: reserved |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_3_FTM_TM_OFFSET 0x0000000c |
| #define RXPCU_PPDU_END_INFO_3_FTM_TM_LSB 7 |
| #define RXPCU_PPDU_END_INFO_3_FTM_TM_MASK 0x00000180 |
| |
| /* Description RXPCU_PPDU_END_INFO_3_DIALOG_TOKEN |
| |
| The dialog token in the FTM or TM frame. Only valid when |
| the FTM is set. Clear to 254 for a non-FTM frame |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_3_DIALOG_TOKEN_OFFSET 0x0000000c |
| #define RXPCU_PPDU_END_INFO_3_DIALOG_TOKEN_LSB 9 |
| #define RXPCU_PPDU_END_INFO_3_DIALOG_TOKEN_MASK 0x0001fe00 |
| |
| /* Description RXPCU_PPDU_END_INFO_3_FOLLOW_UP_DIALOG_TOKEN |
| |
| The follow up dialog token in the FTM or TM frame. Only |
| valid when the FTM is set. Clear to 0 for a non-FTM frame, |
| The follow up dialog token in the FTM frame. Only valid when |
| the FTM is set. Clear to 255 for a non-FTM frame<legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_3_FOLLOW_UP_DIALOG_TOKEN_OFFSET 0x0000000c |
| #define RXPCU_PPDU_END_INFO_3_FOLLOW_UP_DIALOG_TOKEN_LSB 17 |
| #define RXPCU_PPDU_END_INFO_3_FOLLOW_UP_DIALOG_TOKEN_MASK 0x01fe0000 |
| |
| /* Description RXPCU_PPDU_END_INFO_3_BB_CAPTURED_CHANNEL |
| |
| Set by RXPCU when MACRX_FREEZE_CAPTURE_CHANNEL TLV is |
| sent to PHY, FW check it to correlate current PPDU TLVs with |
| uploaded channel information. |
| |
| |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_3_BB_CAPTURED_CHANNEL_OFFSET 0x0000000c |
| #define RXPCU_PPDU_END_INFO_3_BB_CAPTURED_CHANNEL_LSB 25 |
| #define RXPCU_PPDU_END_INFO_3_BB_CAPTURED_CHANNEL_MASK 0x02000000 |
| |
| /* Description RXPCU_PPDU_END_INFO_3_BB_CAPTURED_REASON |
| |
| Copy capture_reason of MACRX_FREEZE_CAPTURE_CHANNEL TLV |
| to here for FW usage. Valid when bb_captured_channel or |
| bb_captured_timeout is set. |
| |
| |
| |
| This field indicates why the MAC asked to capture the |
| channel |
| |
| <enum 0 freeze_reason_TM> |
| |
| <enum 1 freeze_reason_FTM> |
| |
| <enum 2 freeze_reason_ACK_resp_to_TM_FTM> |
| |
| <enum 3 freeze_reason_TA_RA_TYPE_FILTER> |
| |
| <enum 4 freeze_reason_NDPA_NDP> |
| |
| <enum 5 freeze_reason_ALL_PACKET> |
| |
| |
| |
| <legal 0-5> |
| */ |
| #define RXPCU_PPDU_END_INFO_3_BB_CAPTURED_REASON_OFFSET 0x0000000c |
| #define RXPCU_PPDU_END_INFO_3_BB_CAPTURED_REASON_LSB 26 |
| #define RXPCU_PPDU_END_INFO_3_BB_CAPTURED_REASON_MASK 0x1c000000 |
| |
| /* Description RXPCU_PPDU_END_INFO_3_BB_CAPTURED_TIMEOUT |
| |
| Set by RxPCU to indicate channel capture condition is |
| meet, but MACRX_FREEZE_CAPTURE_CHANNEL is not sent to PHY |
| due to AST long delay, which means the rx_frame_falling edge |
| to FREEZE TLV ready time exceed the threshold time defined |
| by RXPCU register FREEZE_TLV_DELAY_CNT_THRESH. |
| |
| Bb_captured_reason is still valid in this case. |
| |
| |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_3_BB_CAPTURED_TIMEOUT_OFFSET 0x0000000c |
| #define RXPCU_PPDU_END_INFO_3_BB_CAPTURED_TIMEOUT_LSB 29 |
| #define RXPCU_PPDU_END_INFO_3_BB_CAPTURED_TIMEOUT_MASK 0x20000000 |
| |
| /* Description RXPCU_PPDU_END_INFO_3_RESERVED_3 |
| |
| <legal 0> |
| */ |
| #define RXPCU_PPDU_END_INFO_3_RESERVED_3_OFFSET 0x0000000c |
| #define RXPCU_PPDU_END_INFO_3_RESERVED_3_LSB 30 |
| #define RXPCU_PPDU_END_INFO_3_RESERVED_3_MASK 0xc0000000 |
| |
| /* Description RXPCU_PPDU_END_INFO_4_BEFORE_MPDU_COUNT_PASSING_FCS |
| |
| Number of MPDUs received in this PPDU that passed the |
| FCS check before the Coex TX started |
| |
| |
| |
| The counter saturates at 0x3FF. |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_4_BEFORE_MPDU_COUNT_PASSING_FCS_OFFSET 0x00000010 |
| #define RXPCU_PPDU_END_INFO_4_BEFORE_MPDU_COUNT_PASSING_FCS_LSB 0 |
| #define RXPCU_PPDU_END_INFO_4_BEFORE_MPDU_COUNT_PASSING_FCS_MASK 0x000003ff |
| |
| /* Description RXPCU_PPDU_END_INFO_4_BEFORE_MPDU_COUNT_FAILING_FCS |
| |
| Number of MPDUs received in this PPDU that failed the |
| FCS check before the Coex TX started |
| |
| |
| |
| The counter saturates at 0x3FF. |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_4_BEFORE_MPDU_COUNT_FAILING_FCS_OFFSET 0x00000010 |
| #define RXPCU_PPDU_END_INFO_4_BEFORE_MPDU_COUNT_FAILING_FCS_LSB 10 |
| #define RXPCU_PPDU_END_INFO_4_BEFORE_MPDU_COUNT_FAILING_FCS_MASK 0x000ffc00 |
| |
| /* Description RXPCU_PPDU_END_INFO_4_AFTER_MPDU_COUNT_PASSING_FCS |
| |
| Number of MPDUs received in this PPDU that passed the |
| FCS check after the moment the Coex TX started |
| |
| |
| |
| (Note: The partially received MPDU when the COEX tx |
| start event came in falls in the after category) |
| |
| |
| |
| The counter saturates at 0x3FF. |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_4_AFTER_MPDU_COUNT_PASSING_FCS_OFFSET 0x00000010 |
| #define RXPCU_PPDU_END_INFO_4_AFTER_MPDU_COUNT_PASSING_FCS_LSB 20 |
| #define RXPCU_PPDU_END_INFO_4_AFTER_MPDU_COUNT_PASSING_FCS_MASK 0x3ff00000 |
| |
| /* Description RXPCU_PPDU_END_INFO_4_RESERVED_4 |
| |
| <legal 0> |
| */ |
| #define RXPCU_PPDU_END_INFO_4_RESERVED_4_OFFSET 0x00000010 |
| #define RXPCU_PPDU_END_INFO_4_RESERVED_4_LSB 30 |
| #define RXPCU_PPDU_END_INFO_4_RESERVED_4_MASK 0xc0000000 |
| |
| /* Description RXPCU_PPDU_END_INFO_5_AFTER_MPDU_COUNT_FAILING_FCS |
| |
| Number of MPDUs received in this PPDU that failed the |
| FCS check after the moment the Coex TX started |
| |
| |
| |
| (Note: The partially received MPDU when the COEX tx |
| start event came in falls in the after category) |
| |
| |
| |
| The counter saturates at 0x3FF. |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_5_AFTER_MPDU_COUNT_FAILING_FCS_OFFSET 0x00000014 |
| #define RXPCU_PPDU_END_INFO_5_AFTER_MPDU_COUNT_FAILING_FCS_LSB 0 |
| #define RXPCU_PPDU_END_INFO_5_AFTER_MPDU_COUNT_FAILING_FCS_MASK 0x000003ff |
| |
| /* Description RXPCU_PPDU_END_INFO_5_RESERVED_5 |
| |
| <legal 0> |
| */ |
| #define RXPCU_PPDU_END_INFO_5_RESERVED_5_OFFSET 0x00000014 |
| #define RXPCU_PPDU_END_INFO_5_RESERVED_5_LSB 10 |
| #define RXPCU_PPDU_END_INFO_5_RESERVED_5_MASK 0xfffffc00 |
| |
| /* Description RXPCU_PPDU_END_INFO_6_PHY_TIMESTAMP_TX_LOWER_32 |
| |
| The PHY timestamp in the AMPI of the most recent rising |
| edge (TODO: of what ???) after the TX_PHY_DESC. This field |
| indicates the lower 32 bits of the timestamp |
| */ |
| #define RXPCU_PPDU_END_INFO_6_PHY_TIMESTAMP_TX_LOWER_32_OFFSET 0x00000018 |
| #define RXPCU_PPDU_END_INFO_6_PHY_TIMESTAMP_TX_LOWER_32_LSB 0 |
| #define RXPCU_PPDU_END_INFO_6_PHY_TIMESTAMP_TX_LOWER_32_MASK 0xffffffff |
| |
| /* Description RXPCU_PPDU_END_INFO_7_PHY_TIMESTAMP_TX_UPPER_32 |
| |
| The PHY timestamp in the AMPI of the most recent rising |
| edge (TODO: of what ???) after the TX_PHY_DESC. This field |
| indicates the upper 32 bits of the timestamp |
| */ |
| #define RXPCU_PPDU_END_INFO_7_PHY_TIMESTAMP_TX_UPPER_32_OFFSET 0x0000001c |
| #define RXPCU_PPDU_END_INFO_7_PHY_TIMESTAMP_TX_UPPER_32_LSB 0 |
| #define RXPCU_PPDU_END_INFO_7_PHY_TIMESTAMP_TX_UPPER_32_MASK 0xffffffff |
| |
| /* Description RXPCU_PPDU_END_INFO_8_BB_LENGTH |
| |
| Indicates the number of bytes of baseband information |
| for PPDUs where the BB descriptor preamble type is 0x80 to |
| 0xFF which indicates that this is not a normal PPDU but |
| rather contains baseband debug information. |
| |
| TODO: Is this still needed ??? |
| */ |
| #define RXPCU_PPDU_END_INFO_8_BB_LENGTH_OFFSET 0x00000020 |
| #define RXPCU_PPDU_END_INFO_8_BB_LENGTH_LSB 0 |
| #define RXPCU_PPDU_END_INFO_8_BB_LENGTH_MASK 0x0000ffff |
| |
| /* Description RXPCU_PPDU_END_INFO_8_BB_DATA |
| |
| Indicates that BB data associated with this PPDU will |
| exist in the receive buffer. The exact contents of this BB |
| data can be found by decoding the BB TLV in the buffer |
| associated with the BB data. See vector_fragment in the |
| Helium_mac_phy_interface.docx |
| */ |
| #define RXPCU_PPDU_END_INFO_8_BB_DATA_OFFSET 0x00000020 |
| #define RXPCU_PPDU_END_INFO_8_BB_DATA_LSB 16 |
| #define RXPCU_PPDU_END_INFO_8_BB_DATA_MASK 0x00010000 |
| |
| /* Description RXPCU_PPDU_END_INFO_8_RESERVED_8 |
| |
| Reserved: HW should fill with 0, FW should ignore. |
| */ |
| #define RXPCU_PPDU_END_INFO_8_RESERVED_8_OFFSET 0x00000020 |
| #define RXPCU_PPDU_END_INFO_8_RESERVED_8_LSB 17 |
| #define RXPCU_PPDU_END_INFO_8_RESERVED_8_MASK 0x000e0000 |
| |
| /* Description RXPCU_PPDU_END_INFO_8_FIRST_BT_BROADCAST_STATUS_DETAILS |
| |
| Same contents as field bt_broadcast_status_details for |
| the first received COEX_STATUS_BROADCAST tlv during this |
| PPDU reception. |
| |
| |
| |
| If no COEX_STATUS_BROADCAST tlv is received during this |
| PPDU reception, this field will be set to 0 |
| |
| |
| |
| |
| |
| For detailed info see doc: TBD |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_8_FIRST_BT_BROADCAST_STATUS_DETAILS_OFFSET 0x00000020 |
| #define RXPCU_PPDU_END_INFO_8_FIRST_BT_BROADCAST_STATUS_DETAILS_LSB 20 |
| #define RXPCU_PPDU_END_INFO_8_FIRST_BT_BROADCAST_STATUS_DETAILS_MASK 0xfff00000 |
| |
| /* Description RXPCU_PPDU_END_INFO_9_RX_PPDU_DURATION |
| |
| The length of this PPDU reception in us |
| */ |
| #define RXPCU_PPDU_END_INFO_9_RX_PPDU_DURATION_OFFSET 0x00000024 |
| #define RXPCU_PPDU_END_INFO_9_RX_PPDU_DURATION_LSB 0 |
| #define RXPCU_PPDU_END_INFO_9_RX_PPDU_DURATION_MASK 0x00ffffff |
| |
| /* Description RXPCU_PPDU_END_INFO_9_RESERVED_9 |
| |
| <legal 0> |
| */ |
| #define RXPCU_PPDU_END_INFO_9_RESERVED_9_OFFSET 0x00000024 |
| #define RXPCU_PPDU_END_INFO_9_RESERVED_9_LSB 24 |
| #define RXPCU_PPDU_END_INFO_9_RESERVED_9_MASK 0xff000000 |
| |
| /* Description RXPCU_PPDU_END_INFO_10_AST_INDEX |
| |
| The AST index of the receive Ack/BA. This information |
| is provided from the TXPCU to the RXPCU for receive Ack/BA |
| for implicit beamforming. |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_10_AST_INDEX_OFFSET 0x00000028 |
| #define RXPCU_PPDU_END_INFO_10_AST_INDEX_LSB 0 |
| #define RXPCU_PPDU_END_INFO_10_AST_INDEX_MASK 0x0000ffff |
| |
| /* Description RXPCU_PPDU_END_INFO_10_AST_INDEX_VALID |
| |
| Indicates that ast_index is valid. Should only be set |
| for receive Ack/BA where single stream implicit sounding is |
| captured. |
| */ |
| #define RXPCU_PPDU_END_INFO_10_AST_INDEX_VALID_OFFSET 0x00000028 |
| #define RXPCU_PPDU_END_INFO_10_AST_INDEX_VALID_LSB 16 |
| #define RXPCU_PPDU_END_INFO_10_AST_INDEX_VALID_MASK 0x00010000 |
| |
| /* Description RXPCU_PPDU_END_INFO_10_RESERVED_10 |
| |
| <legal 0> |
| */ |
| #define RXPCU_PPDU_END_INFO_10_RESERVED_10_OFFSET 0x00000028 |
| #define RXPCU_PPDU_END_INFO_10_RESERVED_10_LSB 17 |
| #define RXPCU_PPDU_END_INFO_10_RESERVED_10_MASK 0x000e0000 |
| |
| /* Description RXPCU_PPDU_END_INFO_10_SECOND_BT_BROADCAST_STATUS_DETAILS |
| |
| Same contents as field bt_broadcast_status_details for |
| the second received COEX_STATUS_BROADCAST tlv during this |
| PPDU reception. |
| |
| |
| |
| If no second COEX_STATUS_BROADCAST tlv is received |
| during this PPDU reception, this field will be set to 0 |
| |
| |
| |
| |
| |
| For detailed info see doc: TBD |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_10_SECOND_BT_BROADCAST_STATUS_DETAILS_OFFSET 0x00000028 |
| #define RXPCU_PPDU_END_INFO_10_SECOND_BT_BROADCAST_STATUS_DETAILS_LSB 20 |
| #define RXPCU_PPDU_END_INFO_10_SECOND_BT_BROADCAST_STATUS_DETAILS_MASK 0xfff00000 |
| |
| /* EXTERNAL REFERENCE : struct phyrx_abort_request_info phyrx_abort_request_info_details */ |
| |
| |
| /* Description RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_PHYRX_ABORT_REASON |
| |
| <enum 0 phyrx_err_phy_off> Reception aborted due to |
| receiving a PHY_OFF TLV |
| |
| <enum 1 phyrx_err_synth_off> |
| |
| <enum 2 phyrx_err_ofdma_timing> |
| |
| <enum 3 phyrx_err_ofdma_signal_parity> |
| |
| <enum 4 phyrx_err_ofdma_rate_illegal> |
| |
| <enum 5 phyrx_err_ofdma_length_illegal> |
| |
| <enum 6 phyrx_err_ofdma_restart> |
| |
| <enum 7 phyrx_err_ofdma_service> |
| |
| <enum 8 phyrx_err_ppdu_ofdma_power_drop> |
| |
| |
| |
| <enum 9 phyrx_err_cck_blokker> |
| |
| <enum 10 phyrx_err_cck_timing> |
| |
| <enum 11 phyrx_err_cck_header_crc> |
| |
| <enum 12 phyrx_err_cck_rate_illegal> |
| |
| <enum 13 phyrx_err_cck_length_illegal> |
| |
| <enum 14 phyrx_err_cck_restart> |
| |
| <enum 15 phyrx_err_cck_service> |
| |
| <enum 16 phyrx_err_cck_power_drop> |
| |
| |
| |
| <enum 17 phyrx_err_ht_crc_err> |
| |
| <enum 18 phyrx_err_ht_length_illegal> |
| |
| <enum 19 phyrx_err_ht_rate_illegal> |
| |
| <enum 20 phyrx_err_ht_zlf> |
| |
| <enum 21 phyrx_err_false_radar_ext> |
| |
| |
| |
| <enum 22 phyrx_err_green_field> |
| |
| |
| |
| <enum 23 phyrx_err_bw_gt_dyn_bw> |
| |
| <enum 24 phyrx_err_leg_ht_mismatch> |
| |
| <enum 25 phyrx_err_vht_crc_error> |
| |
| <enum 26 phyrx_err_vht_siga_unsupported> |
| |
| <enum 27 phyrx_err_vht_lsig_len_invalid> |
| |
| <enum 28 phyrx_err_vht_ndp_or_zlf> |
| |
| <enum 29 phyrx_err_vht_nsym_lt_zero> |
| |
| <enum 30 phyrx_err_vht_rx_extra_symbol_mismatch> |
| |
| <enum 31 phyrx_err_vht_rx_skip_group_id0> |
| |
| <enum 32 phyrx_err_vht_rx_skip_group_id1to62> |
| |
| <enum 33 phyrx_err_vht_rx_skip_group_id63> |
| |
| <enum 34 phyrx_err_ofdm_ldpc_decoder_disabled> |
| |
| <enum 35 phyrx_err_defer_nap> |
| |
| <enum 36 phyrx_err_fdomain_timeout> |
| |
| <enum 37 phyrx_err_lsig_rel_check> |
| |
| <enum 38 phyrx_err_bt_collision> |
| |
| <enum 39 phyrx_err_unsupported_mu_feedback> |
| |
| <enum 40 phyrx_err_ppdu_tx_interrupt_rx> |
| |
| <enum 41 phyrx_err_unsupported_cbf> |
| |
| |
| |
| <enum 42 phyrx_err_other> Should not really be used. If |
| needed, ask for documentation update |
| |
| |
| |
| <enum 43 phyrx_err_he_siga_unsupported > <enum 44 |
| phyrx_err_he_crc_error > <enum 45 |
| phyrx_err_he_sigb_unsupported > <enum 46 |
| phyrx_err_he_mu_mode_unsupported > <enum 47 |
| phyrx_err_he_ndp_or_zlf > <enum 48 phyrx_err_he_nsym_lt_zero |
| > <enum 49 phyrx_err_he_ru_params_unsupported > <enum 50 |
| phyrx_err_he_num_users_unsupported ><enum 51 |
| phyrx_err_he_sounding_params_unsupported > |
| |
| |
| |
| <enum 52 phyrx_err_MU_UL_no_power_detected> |
| |
| <enum 53 phyrx_err_MU_UL_not_for_me> |
| |
| |
| |
| <legal 0 - 53> |
| */ |
| #define RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_PHYRX_ABORT_REASON_OFFSET 0x0000002c |
| #define RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_PHYRX_ABORT_REASON_LSB 0 |
| #define RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_PHYRX_ABORT_REASON_MASK 0x000000ff |
| |
| /* Description RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_PHY_ENTERS_NAP_STATE |
| |
| When set, PHY enters PHY NAP state after sending this |
| abort |
| |
| |
| |
| Note that nap and defer state are mutually exclusive. |
| |
| |
| |
| Field put pro-actively in place....usage still to be |
| agreed upon. |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_PHY_ENTERS_NAP_STATE_OFFSET 0x0000002c |
| #define RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_PHY_ENTERS_NAP_STATE_LSB 8 |
| #define RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_PHY_ENTERS_NAP_STATE_MASK 0x00000100 |
| |
| /* Description RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_PHY_ENTERS_DEFER_STATE |
| |
| When set, PHY enters PHY defer state after sending this |
| abort |
| |
| |
| |
| Note that nap and defer state are mutually exclusive. |
| |
| |
| |
| Field put pro-actively in place....usage still to be |
| agreed upon. |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_PHY_ENTERS_DEFER_STATE_OFFSET 0x0000002c |
| #define RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_PHY_ENTERS_DEFER_STATE_LSB 9 |
| #define RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_PHY_ENTERS_DEFER_STATE_MASK 0x00000200 |
| |
| /* Description RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_RESERVED_0 |
| |
| <legal 0> |
| */ |
| #define RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_RESERVED_0_OFFSET 0x0000002c |
| #define RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_RESERVED_0_LSB 10 |
| #define RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_RESERVED_0_MASK 0x0000fc00 |
| |
| /* Description RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_RECEIVE_DURATION |
| |
| The remaining receive duration of this PPDU in the |
| medium (in us). When PHY does not know this duration when |
| this TLV is generated, the field will be set to 0. |
| |
| The timing reference point is the reception by the MAC |
| of this TLV. The value shall be accurate to within 2us. |
| |
| |
| |
| In case Phy_enters_nap_state and/or |
| Phy_enters_defer_state is set, there is a possibility that |
| MAC PMM can also decide to go into a low(er) power state. |
| |
| <legal all> |
| */ |
| #define RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_RECEIVE_DURATION_OFFSET 0x0000002c |
| #define RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_RECEIVE_DURATION_LSB 16 |
| #define RXPCU_PPDU_END_INFO_11_PHYRX_ABORT_REQUEST_INFO_DETAILS_RECEIVE_DURATION_MASK 0xffff0000 |
| |
| /* EXTERNAL REFERENCE : struct macrx_abort_request_info macrx_abort_request_info_details */ |
| |
| |
| /* Description RXPCU_PPDU_END_INFO_12_MACRX_ABORT_REQUEST_INFO_DETAILS_MACRX_ABORT_REASON |
| |
| <enum 0 macrx_abort_sw_initiated> |
| |
| <enum 1 macrx_abort_obss_reception> Upon receiving this |
| abort reason, PHY should stop reception of the current frame |
| and go back into a search mode |
| |
| <enum 2 macrx_abort_other> |
| |
| <enum 3 macrx_abort_sw_initiated_channel_switch > MAC FW |
| issued an abort for channel switch reasons |
| |
| <enum 4 macrx_abort_sw_initiated_power_save > MAC FW |
| issued an abort power save reasons |
| |
| <enum 5 macrx_abort_too_much_bad_data > RXPCU is |
| terminating the current ongoing reception, as the data that |
| MAC is receiving seems to be all garbage... The PER is too |
| high, or in case of MU UL, Likely the trigger frame never |
| got properly received by any of the targeted MU UL devices. |
| After the abort, PHYRX can resume a normal search mode. |
| |
| |
| |
| <legal 0-5> |
| */ |
| #define RXPCU_PPDU_END_INFO_12_MACRX_ABORT_REQUEST_INFO_DETAILS_MACRX_ABORT_REASON_OFFSET 0x00000030 |
| #define RXPCU_PPDU_END_INFO_12_MACRX_ABORT_REQUEST_INFO_DETAILS_MACRX_ABORT_REASON_LSB 0 |
| #define RXPCU_PPDU_END_INFO_12_MACRX_ABORT_REQUEST_INFO_DETAILS_MACRX_ABORT_REASON_MASK 0x000000ff |
| |
| /* Description RXPCU_PPDU_END_INFO_12_MACRX_ABORT_REQUEST_INFO_DETAILS_RESERVED_0 |
| |
| <legal 0> |
| */ |
| #define RXPCU_PPDU_END_INFO_12_MACRX_ABORT_REQUEST_INFO_DETAILS_RESERVED_0_OFFSET 0x00000030 |
| #define RXPCU_PPDU_END_INFO_12_MACRX_ABORT_REQUEST_INFO_DETAILS_RESERVED_0_LSB 8 |
| #define RXPCU_PPDU_END_INFO_12_MACRX_ABORT_REQUEST_INFO_DETAILS_RESERVED_0_MASK 0x0000ff00 |
| |
| /* Description RXPCU_PPDU_END_INFO_13_RX_PPDU_END_MARKER |
| |
| Field used by SW to double check that their structure |
| alignment is in sync with what HW has done. |
| |
| <legal 0xAABBCCDD> |
| */ |
| #define RXPCU_PPDU_END_INFO_13_RX_PPDU_END_MARKER_OFFSET 0x00000034 |
| #define RXPCU_PPDU_END_INFO_13_RX_PPDU_END_MARKER_LSB 0 |
| #define RXPCU_PPDU_END_INFO_13_RX_PPDU_END_MARKER_MASK 0xffffffff |
| |
| |
| #endif // _RXPCU_PPDU_END_INFO_H_ |