| /* |
| * Copyright (c) 2011-2020 The Linux Foundation. All rights reserved. |
| * |
| * Previously licensed under the ISC license by Qualcomm Atheros, Inc. |
| * |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| /* |
| * This file was originally distributed by Qualcomm Atheros, Inc. |
| * under proprietary terms before Copyright ownership was assigned |
| * to the Linux Foundation. |
| */ |
| |
| #ifndef _WMI_SERVICES_H_ |
| #define _WMI_SERVICES_H_ |
| |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| |
| |
| typedef enum { |
| WMI_SERVICE_BEACON_OFFLOAD=0, /* beacon offload */ |
| WMI_SERVICE_SCAN_OFFLOAD=1, /* scan offload */ |
| WMI_SERVICE_ROAM_SCAN_OFFLOAD=2, /* roam scan offload */ |
| WMI_SERVICE_BCN_MISS_OFFLOAD=3, /* beacon miss offload */ |
| WMI_SERVICE_STA_PWRSAVE=4, /* fake sleep + basic power save */ |
| WMI_SERVICE_STA_ADVANCED_PWRSAVE=5, /* uapsd, pspoll, force sleep */ |
| WMI_SERVICE_AP_UAPSD=6, /* uapsd on AP */ |
| WMI_SERVICE_AP_DFS=7, /* DFS on AP */ |
| WMI_SERVICE_11AC=8, /* supports 11ac */ |
| WMI_SERVICE_BLOCKACK=9, /* Supports triggering ADDBA/DELBA from host*/ |
| WMI_SERVICE_PHYERR=10, /* PHY error */ |
| WMI_SERVICE_BCN_FILTER=11, /* Beacon filter support */ |
| WMI_SERVICE_RTT=12, /* RTT (round trip time) support */ |
| WMI_SERVICE_WOW=13, /* WOW Support */ |
| WMI_SERVICE_RATECTRL_CACHE=14, /* Rate-control caching */ |
| WMI_SERVICE_IRAM_TIDS=15, /* TIDs in IRAM */ |
| WMI_SERVICE_ARPNS_OFFLOAD=16, /* ARP NS Offload support for STA vdev */ |
| WMI_SERVICE_NLO=17, /* Network list offload service */ |
| WMI_SERVICE_GTK_OFFLOAD=18, /* GTK offload */ |
| WMI_SERVICE_SCAN_SCH=19, /* Scan Scheduler Service */ |
| WMI_SERVICE_CSA_OFFLOAD=20, /* CSA offload service */ |
| WMI_SERVICE_CHATTER=21, /* Chatter service */ |
| WMI_SERVICE_COEX_FREQAVOID=22, /* FW report freq range to avoid */ |
| WMI_SERVICE_PACKET_POWER_SAVE=23, /* packet power save service */ |
| WMI_SERVICE_FORCE_FW_HANG=24, /* Service to test the firmware recovery mechanism */ |
| WMI_SERVICE_GPIO=25, /* GPIO service */ |
| WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM=26, /* Modulated DTIM support */ |
| WMI_STA_UAPSD_BASIC_AUTO_TRIG=27, /* Basic version of station UAPSD AC Trigger Generation Method with |
| * variable tigger periods (service, delay, and suspend intervals) */ |
| WMI_STA_UAPSD_VAR_AUTO_TRIG=28, /* Station UAPSD AC Trigger Generation Method with variable |
| * trigger periods (service, delay, and suspend intervals) */ |
| WMI_SERVICE_STA_KEEP_ALIVE=29, /* Serivce to support the STA KEEP ALIVE mechanism */ |
| WMI_SERVICE_TX_ENCAP=30, /* Packet type for TX encapsulation */ |
| WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC=31, /* detect out-of-sync sleeping stations */ |
| WMI_SERVICE_EARLY_RX=32, /* adaptive early-rx feature */ |
| WMI_SERVICE_STA_SMPS=33, /* STA MIMO-PS */ |
| WMI_SERVICE_FWTEST=34, /* Firmware test service */ |
| WMI_SERVICE_STA_WMMAC=35, /* STA WMMAC */ |
| WMI_SERVICE_TDLS=36, /* TDLS support */ |
| WMI_SERVICE_BURST=37, /* SIFS spaced burst support */ |
| WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE=38, /* Dynamic beaocn interval change for SAP/P2p GO in MCC scenario */ |
| WMI_SERVICE_ADAPTIVE_OCS=39, /* Service to support adaptive off-channel scheduler */ |
| WMI_SERVICE_BA_SSN_SUPPORT=40, /* target will provide Sequence number for the peer/tid combo */ |
| WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE=41, |
| WMI_SERVICE_WLAN_HB=42, /* wlan HB service */ |
| WMI_SERVICE_LTE_ANT_SHARE_SUPPORT=43, /* support LTE/WLAN antenna sharing */ |
| WMI_SERVICE_BATCH_SCAN=44, /* Service to support batch scan */ |
| WMI_SERVICE_QPOWER=45, /* QPower service */ |
| WMI_SERVICE_PLMREQ=46, |
| WMI_SERVICE_THERMAL_MGMT=47, /* thermal throttling support, |
| * compared with |
| * WMI_SERVICE_THERM_THROT, |
| * this service only reports |
| * current temperature to host, |
| * and host will do the thermal |
| * throttling. */ |
| WMI_SERVICE_RMC=48, /* RMC support */ |
| WMI_SERVICE_MHF_OFFLOAD=49, /* multi-hop forwarding offload */ |
| WMI_SERVICE_COEX_SAR=50, /* target support SAR tx limit from WMI_PDEV_PARAM_TXPOWER_LIMITxG */ |
| WMI_SERVICE_BCN_TXRATE_OVERRIDE=51, /* Will support the bcn/prb rsp rate override */ |
| WMI_SERVICE_NAN=52, /* Neighbor Awareness Network */ |
| WMI_SERVICE_L1SS_STAT=53, /* L1SS statistics counter report */ |
| WMI_SERVICE_ESTIMATE_LINKSPEED=54, /* Linkspeed Estimation per peer */ |
| WMI_SERVICE_OBSS_SCAN=55, /* Service to support OBSS scan */ |
| WMI_SERVICE_TDLS_OFFCHAN=56, /* TDLS off channel support */ |
| WMI_SERVICE_TDLS_UAPSD_BUFFER_STA=57, /* TDLS UAPSD Buffer STA support */ |
| WMI_SERVICE_TDLS_UAPSD_SLEEP_STA=58, /* TDLS UAPSD Sleep STA support */ |
| WMI_SERVICE_IBSS_PWRSAVE=59, /* IBSS power save support */ |
| WMI_SERVICE_LPASS=60, /* Service to support LPASS */ |
| WMI_SERVICE_EXTSCAN=61, /* Extended Scans */ |
| WMI_SERVICE_D0WOW=62, /* D0-WOW Support */ |
| WMI_SERVICE_HSOFFLOAD=63, /* Hotspot offload feature Support */ |
| WMI_SERVICE_ROAM_HO_OFFLOAD=64, /* roam handover offload */ |
| WMI_SERVICE_RX_FULL_REORDER=65, /* target-based Rx full reorder */ |
| WMI_SERVICE_DHCP_OFFLOAD=66, /* DHCP offload support */ |
| WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT=67, /* STA RX DATA offload to IPA support */ |
| WMI_SERVICE_MDNS_OFFLOAD=68, /* mDNS responder offload support */ |
| WMI_SERVICE_SAP_AUTH_OFFLOAD=69, /* softap auth offload */ |
| WMI_SERVICE_DUAL_BAND_SIMULTANEOUS_SUPPORT=70, /* Dual Band Simultaneous support */ |
| WMI_SERVICE_OCB=71, /* OCB mode support */ |
| WMI_SERVICE_AP_ARPNS_OFFLOAD=72, /* arp offload support for ap mode vdev */ |
| WMI_SERVICE_PER_BAND_CHAINMASK_SUPPORT=73, /* Per band chainmask support */ |
| WMI_SERVICE_PACKET_FILTER_OFFLOAD=74, /* Per vdev packet filters */ |
| WMI_SERVICE_MGMT_TX_HTT=75, /* Mgmt Tx via HTT interface */ |
| WMI_SERVICE_MGMT_TX_WMI=76, /* Mgmt Tx via WMI interface */ |
| WMI_SERVICE_EXT_MSG=77, /* WMI_SERVICE_READY_EXT msg follows */ |
| WMI_SERVICE_MAWC=78, /* Motion Aided WiFi Connectivity (MAWC)*/ |
| WMI_SERVICE_PEER_ASSOC_CONF=79, /* target will send ASSOC_CONF after ASSOC_CMD is processed */ |
| WMI_SERVICE_EGAP=80, /* enhanced green ap support */ |
| WMI_SERVICE_STA_PMF_OFFLOAD=81, /* FW supports 11W PMF Offload for STA */ |
| WMI_SERVICE_UNIFIED_WOW_CAPABILITY=82, /* FW supports unified D0 and D3 wow */ |
| WMI_SERVICE_ENHANCED_PROXY_STA=83, /* Enhanced ProxySTA mode support */ |
| WMI_SERVICE_ATF=84, /* Air Time Fairness support */ |
| WMI_SERVICE_COEX_GPIO=85, /* BTCOEX GPIO support */ |
| WMI_SERVICE_AUX_SPECTRAL_INTF=86, /* Aux Radio enhancement support for ignoring spectral scan intf from main radios */ |
| WMI_SERVICE_AUX_CHAN_LOAD_INTF=87, /* Aux Radio enhancement support for ignoring chan load intf from main radios*/ |
| WMI_SERVICE_BSS_CHANNEL_INFO_64=88, /* BSS channel info (freq, noise floor, 64-bit counters) event support */ |
| WMI_SERVICE_ENTERPRISE_MESH=89, /* Enterprise MESH Service Support */ |
| WMI_SERVICE_RESTRT_CHNL_SUPPORT=90, /* Restricted Channel Support */ |
| WMI_SERVICE_BPF_OFFLOAD=91, /* FW supports bpf offload */ |
| WMI_SERVICE_SYNC_DELETE_CMDS=92, /* FW sends response event for Peer, Vdev delete commands */ |
| WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT=93, |
| WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT=94, |
| WMI_SERVICE_RATECTRL_LIMIT_MAX_MIN_RATES=95, /* allow per-peer tx MCS min/max limits by host */ |
| WMI_SERVICE_NAN_DATA=96, /* FW supports NAN data */ |
| WMI_SERVICE_NAN_RTT=97, /* FW supports NAN RTT */ |
| WMI_SERVICE_11AX=98, /* FW supports 802.11ax */ |
| /* WMI_SERVICE_DEPRECATED_REPLACE |
| * FW supports these new WMI commands, to be used rather than |
| * deprecated matching commands: |
| * - WMI_PDEV_SET_PCL_CMDID (vs. WMI_SOC_SET_PCL_CMDID) |
| * - WMI_PDEV_SET_HW_MODE_CMDID (vs. WMI_SOC_SET_HW_MODE_CMDID) |
| * - WMI_PDEV_SET_MAC_CONFIG_CMDID (vs. WMI_SOC_SET_DUAL_MAC_CONFIG_CMDID) |
| * - WMI_PDEV_SET_ANTENNA_MODE_CMDID (vs. WMI_SOC_SET_ANTENNA_MODE_CMDID) |
| * - WMI_VDEV_SET_DSCP_TID_MAP_CMDID (vs. WMI_VDEV_SET_WMM_PARAMS_CMDID) |
| */ |
| WMI_SERVICE_DEPRECATED_REPLACE=99, |
| WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE=100, /* FW supports a new mode that allows to run connection tracker in host */ |
| WMI_SERVICE_ENHANCED_MCAST_FILTER=101, /* FW supports enhanced multicast filtering (of mcast IP inside ucast WLAN) */ |
| WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT=102, /* periodic channel stats service */ |
| WMI_SERVICE_MESH_11S=103, /* 11s mesh service support */ |
| WMI_SERVICE_HALF_RATE_QUARTER_RATE_SUPPORT=104, /* FW+HW supports 10 MHz (half rate) and 5 MHz (quarter rate) channel bandwidth */ |
| WMI_SERVICE_VDEV_RX_FILTER=105, /* Support per-vdev specs of which rx frames to filter out */ |
| WMI_SERVICE_P2P_LISTEN_OFFLOAD_SUPPORT=106, |
| WMI_SERVICE_MARK_FIRST_WAKEUP_PACKET=107, /* FW supports marking the first data packet which wakes the host from suspend */ |
| WMI_SERVICE_MULTIPLE_MCAST_FILTER_SET=108, /* FW supports command that can add/delete multiple mcast filters */ |
| /* WMI_SERVICE_HOST_MANAGED_RX_REORDER - |
| * FW supports host-managed RX reorder. |
| * Host managed RX reorder involves RX BA state machine handling |
| * on peer/TID basis, REO configuration for HW based reordering/PN |
| * check and processing reorder exceptions generated by HW. |
| */ |
| WMI_SERVICE_HOST_MANAGED_RX_REORDER=109, |
| /* Specify whether the target supports the following WMI messages for |
| * reading / writing its flash memory: |
| * WMI_READ_DATA_FROM_FLASH_CMDID, |
| * WMI_READ_DATA_FROM_FLASH_EVENTID, |
| * WMI_TRANSFER_DATA_TO_FLASH_CMDID, |
| * WMI_TRANSFER_DATA_TO_FLASH_COMPLETE_EVENTID, |
| */ |
| WMI_SERVICE_FLASH_RDWR_SUPPORT=110, |
| WMI_SERVICE_WLAN_STATS_REPORT=111, /* support WLAN stats report */ |
| /* WMI_SERVICE_TX_MSDU_ID_NEW_PARTITION_SUPPORT - |
| * FW supports bigger MSDU ID partition which is defined as HTT_TX_IPA_NEW_MSDU_ID_SPACE_BEGIN |
| * When both host and FW support new partition, FW uses HTT_TX_IPA_NEW_MSDU_ID_SPACE_BEGIN |
| * If host doesn't support, FW falls back to HTT_TX_IPA_MSDU_ID_SPACE_BEGIN |
| * Handshaking is done through WMI_INIT and WMI service ready |
| */ |
| WMI_SERVICE_TX_MSDU_ID_NEW_PARTITION_SUPPORT=112, /* support bigger MSDU ID partition */ |
| WMI_SERVICE_DFS_PHYERR_OFFLOAD=113, |
| WMI_SERVICE_RCPI_SUPPORT=114, |
| WMI_SERVICE_FW_MEM_DUMP_SUPPORT=115, /* Support FW Memory dump */ |
| WMI_SERVICE_PEER_STATS_INFO=116, /* support per peer stats info */ |
| WMI_SERVICE_REGULATORY_DB=117, /* support regulatory database in FW */ |
| WMI_SERVICE_11D_OFFLOAD=118, /* support 11D scan offload in FW */ |
| WMI_SERVICE_HW_DATA_FILTERING=119, |
| WMI_SERVICE_MULTIPLE_VDEV_RESTART=120, /* Support for single command for multiple vdev restart */ |
| WMI_SERVICE_PKT_ROUTING=121, /* Support for routing specific data packets to selected destination rings */ |
| WMI_SERVICE_CHECK_CAL_VERSION=122, /* Support cal version check */ |
| WMI_SERVICE_OFFCHAN_TX_WMI=123, /* Support offchan data/mgmt tx over wmi */ |
| WMI_SERVICE_8SS_TX_BFEE = 124, /* support for 8Ant Bfee */ |
| WMI_SERVICE_EXTENDED_NSS_SUPPORT=125, /* Extend NSS support for 80Mhz and 160Mhz */ |
| WMI_SERVICE_ACK_TIMEOUT=126, /* Support TX ack timeout configurations */ |
| WMI_SERVICE_PDEV_BSS_CHANNEL_INFO_64 = 127, /* BSS channel info (freq, noise floor, rx clear, cycles 64-bit counters) event support */ |
| |
| WMI_MAX_SERVICE=128, /* max service */ |
| |
| /* NOTE: |
| * The above service flags are delivered in the wmi_service_bitmap field |
| * of the WMI_SERVICE_READY_EVENT message. |
| * The below service flags are delivered in a WMI_SERVICE_AVAILABLE_EVENT |
| * message rather than in the WMI_SERVICE_READY_EVENT message's |
| * wmi_service_bitmap field. |
| * The WMI_SERVICE_AVAILABLE_EVENT message immediately precedes the |
| * WMI_SERVICE_READY_EVENT message. |
| */ |
| |
| WMI_SERVICE_CHAN_LOAD_INFO=128, /* The values in WMI_CHAN_INFO_EVENTID is the difference in cycle counters */ |
| WMI_SERVICE_TX_PPDU_INFO_STATS_SUPPORT=129, /* support to report tx ppdu info stats via htt events */ |
| WMI_SERVICE_VDEV_LIMIT_OFFCHAN_SUPPORT=130, /* support to report the offchannel duration limiting capability on connected interface */ |
| WMI_SERVICE_FILS_SUPPORT=131, /* support for FILS */ |
| WMI_SERVICE_WLAN_OIC_PING_OFFLOAD=132, /* Support for wlan OIC ping service */ |
| WMI_SERVICE_WLAN_DHCP_RENEW=133, /* Support for wlan DHCP Renew service */ |
| WMI_SERVICE_MAWC_SUPPORT = 134, /* Support for MAWC service */ |
| WMI_SERVICE_VDEV_LATENCY_CONFIG=135, /* support for vdev latency config */ |
| WMI_SERVICE_PDEV_UPDATE_CTLTABLE_SUPPORT=136, /* support for pdev update ctl table */ |
| WMI_SERVICE_PKTLOG_SUPPORT_OVER_HTT=137, /* upload pktlog data over HTT communication channel */ |
| WMI_SERVICE_VDEV_MULTI_GROUP_KEY_SUPPORT=138, /* Support for vdev level multi group key */ |
| WMI_SERVICE_SCAN_PHYMODE_SUPPORT=139, /* Support for phymode also with channel in offchan WMI_START_SCAN_CMDID */ |
| WMI_SERVICE_THERM_THROT = 140, /* Support thermal cfg and indication on AP. |
| * Compared with WMI_SERVICE_THERMAL_MGMT, |
| * this service is to allow thermal tool to |
| * configure thermal throttling threshold |
| * for different levels and pass down duty |
| * cycle value. FW will also report thermal |
| * throttling status to host through this |
| * service. */ |
| WMI_SERVICE_BCN_OFFLOAD_START_STOP_SUPPORT=141, /* support dynamically enabling / disabling beacon tx offload */ |
| WMI_SERVICE_WOW_WAKEUP_BY_TIMER_PATTERN=142, /* fw to support waking up host from wow pattern timer */ |
| WMI_SERVICE_PEER_MAP_UNMAP_V2_SUPPORT=143, /* Support for HTT peer map/unmap V2 */ |
| WMI_SERVICE_OFFCHAN_DATA_TID_SUPPORT=144, /* Support new tid for offchan data/mgmt tx over wmi */ |
| WMI_SERVICE_RX_PROMISC_ENABLE_SUPPORT=145, /* Support enabling/disabling rx promiscuous mode as directed by a WMI message from the host */ |
| WMI_SERVICE_SUPPORT_DIRECT_DMA=146, /* indicates target supports direct DMA, |
| * host will rely on WMI_DMA_RING_CAPABILITIES to get supported modules */ |
| WMI_SERVICE_AP_OBSS_DETECTION_OFFLOAD=147, /* Support SAP mode OBSS detection offload */ |
| WMI_SERVICE_11K_NEIGHBOUR_REPORT_SUPPORT=148, /* Support for 11k neighbor report */ |
| WMI_SERVICE_LISTEN_INTERVAL_OFFLOAD_SUPPORT=149, /* Support listen interval offload */ |
| WMI_SERVICE_BSS_COLOR_OFFLOAD=150, /* Support BSS color change for STA, OBSS color collision detection in FW for AP and STA */ |
| WMI_SERVICE_RUNTIME_DPD_RECAL=151, /* Runtime DPD recalibration support */ |
| WMI_SERVICE_STA_TWT=152, /* support for TWT (Target Wake Time) of STA */ |
| WMI_SERVICE_AP_TWT=153, /* support for TWT (Target Wake Time) on AP */ |
| WMI_SERVICE_GMAC_OFFLOAD_SUPPORT=154, /* Support for GMAC */ |
| WMI_SERVICE_SPOOF_MAC_SUPPORT=155, /* support for SERVICE_SPOOF_MAC */ |
| WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT=156, /* Support TID specific configurations per peer (ack,aggr,retry,rate) */ |
| WMI_SERVICE_VDEV_SWRETRY_PER_AC_CONFIG_SUPPORT=157, /* Support vdev software retries configuration per AC (non aggr retry/aggr retry) */ |
| WMI_SERVICE_DUAL_BEACON_ON_SINGLE_MAC_SCC_SUPPORT=158, /* Support dual beacon on same channel on single MAC */ |
| WMI_SERVICE_DUAL_BEACON_ON_SINGLE_MAC_MCC_SUPPORT=159, /* Support dual beacon on different channel on single MAC */ |
| WMI_SERVICE_MOTION_DET=160, /* support for motion detection config */ |
| WMI_SERVICE_INFRA_MBSSID=161, /* support infra multi-BSSID feature */ |
| WMI_SERVICE_OBSS_SPATIAL_REUSE=162, /* support spatial reuse feature */ |
| WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT=163, /* Support different beacon intervals on different VDEVs */ |
| WMI_SERVICE_NAN_DBS_SUPPORT=164, /* Support DBS for NAN discovery interface */ |
| WMI_SERVICE_NDI_DBS_SUPPORT=165, /* Support DBS for NAN data interface */ |
| WMI_SERVICE_NAN_SAP_SUPPORT=166, /* Support SAP Concurrency for NAN Discovery interface */ |
| WMI_SERVICE_NDI_SAP_SUPPORT=167, /* Support SAP Concurrency for NAN Data interface */ |
| WMI_SERVICE_CFR_CAPTURE_SUPPORT=168, /* Support to capture uncompressed Channel Frequency Response (CFR) */ |
| WMI_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_1=169, /* Message type HTT_PEER_CFR_CAPTURE_MSG_TYPE_1 in HTT_T2H_MSG_TYPE_CFR_DUMP_COMPL_IND */ |
| WMI_SERVICE_ESP_SUPPORT=170, /* Support for Estimated Service Params IE */ |
| WMI_SERVICE_PEER_CHWIDTH_CHANGE = 171, /* Support for host to update/re-intersect the node capability */ |
| WMI_SERVICE_WLAN_HPCS_PULSE=172, /* Support for High Precision Clock Synchronization feature */ |
| WMI_SERVICE_PER_VDEV_CHAINMASK_CONFIG_SUPPORT=173, /* Support for configuring chainmask per VDEV */ |
| WMI_SERVICE_TX_DATA_MGMT_ACK_RSSI=174, /* ACK RSSI indication to host for host TX data and mgmt frame */ |
| WMI_SERVICE_NAN_DISABLE_SUPPORT=175, /* indicates firmware is dependent on host to disable NAN incase of concurrencies */ |
| WMI_SERVICE_NAN_DISABLE_SUPPORT__prototype = WMI_SERVICE_NAN_DISABLE_SUPPORT, /* alias, to clarify that NAN_DISABLE_SUPPORT is for prototype testing purposes */ |
| WMI_SERVICE_HTT_H2T_NO_HTC_HDR_LEN_IN_MSG_LEN=176, /* indicates FW supports uniformly excluding the HTC header length from the HTT H2T message length */ |
| WMI_SERVICE_COEX_SUPPORT_UNEQUAL_ISOLATION=177, /* indicates FW supports FDD coex with unequal isolation between BT and each of the WLAN chains */ |
| |
| /* WMI_SERVICE_HW_DB2DBM_CONVERSION_SUPPORT: |
| * Support HW+FW db2dbm conversion for RSSI fields in rx descriptors |
| * and host/target messages. |
| * If enabled, HW and FW will convert SNR to RSSI by adding noise floor |
| * and rssi_offset from BDF to RSSI values that formerly had units of |
| * dB w.r.t. noise floor to convert the units to dBm. |
| * MAC beacon RSSI average register return a signed value for RSSI, |
| * as well as hw descriptors. |
| *------------------------------------------------------------------------- |
| * The RSSI field of below WMI messages will be changed to dBm units: |
| * WMI_MGMT_RX_EVENTID: |
| * wmi_mgmt_rx_hdr.rssi_ctl; |
| * WMI_UPDATE_STATS_EVENTID: |
| * wmi_rssi_stats.rssi_avg_beacon; |
| * wmi_rssi_stats.rssi_avg_data; |
| * wmi_snr_info.bcn_snr; |
| * wmi_snr_info.dat_snr; |
| * wmi_vdev_stats.bcn_rssi_history; (NOT USED IN FW) |
| * wmi_peer_stats.peer_rssi; |
| * WMI_WOW_WAKEUP_HOST_EVENTID: |
| * wmi_rssi_breach_event_fixed_param.rssi; |
| * wmi_roam_event_fixed_param.rssi; |
| * WMI_PEER_STA_KICKOUT_EVENTID: |
| * wmi_peer_sta_kickout_event_fixed_param.rssi; |
| * WMI_PASSPOINT_MATCH_EVENTID: |
| * wmi_passpoint_event_hdr.rssi;(NOT USED IN FW) |
| * WMI_PEER_INFO_EVENTID: |
| * wmi_peer_info.rssi; |
| * WMI_ROAM_SYNCH_EVENTID: |
| * wmi_roam_synch_event_fixed_param.rssi; |
| * WMI_ROAM_SCAN_STATS_EVENTID: |
| * wmi_roam_scan_stats_event_fixed_param.rssi; |
| * wmi_pdev_div_rssi_antid_event_id: |
| * wmi_pdev_div_rssi_antid_event_fixed_param.chain_rssi; |
| * wmi_rssi_breach_event_id |
| * WMI_INST_RSSI_STATS_EVENTID: |
| * wmi_inst_rssi_stats_resp_fixed_param.iRSSI; |
| * RSSI thresholds configured by host |
| * WMI_ROAM_SCAN_RSSI_THRESHOLD |
| * roam_scan_rssi_thresh snr |
| * boost_threshold_5g snr |
| * penalty_threshold_5g snr |
| * good_rssi_threshold snr |
| * roam_bg_scan_bad_rssi_thresh snr |
| * roam_earlystop_thres_min snr |
| * roam_earlystop_thres_max snr |
| * WMI_ROAM_AP_PROFILE |
| * rssi_abs_thresh snr |
| * WMI_ROAM_CONFIGURE_MAWC_CMDID: |
| * best_ap_rssi_threshold Snr |
| * wmi_ap_profile.rssi_abs_thresh; |
| * WMI_ROAM_SCAN_RSSI_THRESHOLD: |
| * wmi_roam_scan_extended_threshold_param.boost_threshold_5g; |
| * wmi_roam_scan_extended_threshold_param.penalty_threshold_5g; |
| * wmi_roam_scan_extended_threshold_param.good_rssi_threshold; |
| * wmi_roam_scan_rssi_threshold_fixed_param.roam_scan_rssi_thresh; |
| * wmi_roam_bg_scan_roaming_param.roam_bg_scan_bad_rssi_thresh; |
| * WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID: |
| * wmi_vdev_spectral_configure_cmd_fixed_param.spectral_scan_rssi_rpt_mode; |
| * wmi_vdev_spectral_configure_cmd_fixed_param.spectral_scan_rssi_thr; |
| * WMI_RSSI_BREACH_MONITOR_CONFIG_CMDID: |
| * wmi_rssi_breach_monitor_config_fixed_param.low_rssi_breach_threshold; |
| * wmi_rssi_breach_monitor_config_fixed_param.hi_rssi_breach_threshold; |
| * WMI_STA_SMPS_PARAM_CMDID: |
| * wmi_sta_smps_param.value of below cmd IDs: |
| * // RSSI threshold to enter Dynamic SMPS mode from inactive mode |
| * WMI_STA_SMPS_PARAM_UPPER_RSSI_THRESH = 0, |
| * // RSSI threshold to enter Stalled-D-SMPS mode from D-SMPS mode |
| * // or to enter D-SMPS mode from Stalled-D-SMPS mode |
| * WMI_STA_SMPS_PARAM_STALL_RSSI_THRESH = 1, |
| * // RSSI threshold to disable SMPS modes |
| * WMI_STA_SMPS_PARAM_LOWER_RSSI_THRESH = 2, |
| * // Upper threshold for beacon-RSSI. Used to reduce RX chainmask. |
| * WMI_STA_SMPS_PARAM_UPPER_BRSSI_THRESH = 3, |
| * // Lower threshold for beacon-RSSI. Used to increase RX chainmask |
| * WMI_STA_SMPS_PARAM_LOWER_BRSSI_THRESH = 4, |
| * // Enable/Disable DTIM 1chRx feature |
| * WMI_STA_SMPS_PARAM_DTIM_1CHRX_ENABLE = 5 |
| * WMI_TDLS_SET_STATE_CMDID: |
| * wmi_tdls_set_state_cmd_fixed_param.rssi_teardown_threshold; |
| * wmi_tdls_set_state_cmd_fixed_param.rssi_delta; |
| *------------------------------------------------------------------------- |
| * The RSSI fields of below HTT data type will change to dBm units: |
| * PREPACK struct htt_tx_wbm_completion.ack_frame_rssi; |
| * PREPACK struct htt_tx_wbm_transmit_status.ack_frame_rssi; |
| * htt_ppdu_stats_user_cmpltn_common_tlv.ack_rssi; |
| */ |
| WMI_SERVICE_HW_DB2DBM_CONVERSION_SUPPORT = 178, |
| WMI_SERVICE_SUPPORT_EXTEND_ADDRESS=179, /* indicates firmware supports host memory addresses larger than 32 bit */ |
| WMI_SERVICE_BEACON_RECEPTION_STATS=180, /* Support per vdev beacon stats info */ |
| WMI_SERVICE_FETCH_TX_PN=181, |
| WMI_SERVICE_PEER_UNMAP_RESPONSE_SUPPORT = 182, /* support peer ids unmap response from host */ |
| WMI_SERVICE_TX_PER_PEER_AMPDU_SIZE = 183, /* indicate FW support per peer TX AMPDU size */ |
| WMI_SERVICE_BSS_COLOR_SWITCH_COUNT = 184, /* Firmware supports bss-color switch count handling */ |
| WMI_SERVICE_HTT_PEER_STATS_SUPPORT = 185, /* Supports the feature where FW sends peer stats autonomously to Host via the HTT_T2H PEER_STATS_IND message */ |
| WMI_SERVICE_UL_RU26_ALLOWED = 186, /* indicates support for RU26 in UL OFDMA */ |
| WMI_SERVICE_GET_MWS_COEX_STATE = 187, /* FW provides MWS Coex info */ |
| WMI_SERVICE_GET_MWS_DPWB_STATE = 188, /* FW provides LTE-Coex Dynamic Power Back-off info */ |
| WMI_SERVICE_GET_MWS_TDM_STATE = 189, /* FW provides LTE-Coex TDM info */ |
| WMI_SERVICE_GET_MWS_IDRX_STATE = 190, /* FW provides LTE-Coex IDRx info */ |
| WMI_SERVICE_GET_MWS_ANTENNA_SHARING_STATE = 191, /* FW provides LTE-Coex Antenna sharing info */ |
| WMI_SERVICE_ENHANCED_TPC_CONFIG_EVENT = 192, /* FW provides enhanced tx power control configuration dump */ |
| WMI_SERVICE_WLM_STATS_REQUEST = 193, /* FW supports WLAN latency manager stats request */ |
| WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT = 194, /* Extended Peer Tid configuration support for QoS related settings */ |
| WMI_SERVICE_WPA3_FT_SAE_SUPPORT = 195, /* FW roaming support for WPA3_FT_SAE */ |
| WMI_SERVICE_WPA3_FT_SUITE_B_SUPPORT = 196, /* FW roaming support for WPA3_FT_SUITE_B */ |
| WMI_SERVICE_VOW_ENABLE=197, /* FW supports a set of features to optimize VoW performance */ |
| WMI_SERVICE_CFR_CAPTURE_IND_EVT_TYPE_1 = 198, /* support WMI_PEER_CFR_CAPTURE_EVENT msg */ |
| WMI_SERVICE_BROADCAST_TWT = 199, /* support of Broadcast TWT (Target Wake Time) for STA/AP */ |
| WMI_SERVICE_RAP_DETECTION_SUPPORT = 200, /* indicate FW supports rogue AP detection */ |
| WMI_SERVICE_PS_TDCC = 201, /* FW support tx_duty_cycle_control powersave */ |
| WMI_SERVICE_THREE_WAY_COEX_CONFIG_LEGACY = 202, /* BTCOEX Three-way CoEx Config Legacy Feature support */ |
| WMI_SERVICE_THREE_WAY_COEX_CONFIG_OVERRIDE = 203, /* BTCOEX Three-way CoEx Config Override Feature support */ |
| WMI_SERVICE_TX_PWR_PER_PEER = 204, /* target supports per-peer tx pwr spec via WMI_PEER_USE_FIXED_PWR */ |
| WMI_SERVICE_STA_PLUS_STA_SUPPORT = 205, /* indicates target supports STA + STA concurrency */ |
| WMI_SERVICE_WPA3_FT_FILS = 206, |
| WMI_SERVICE_ADAPTIVE_11R_ROAM = 207, /* Indicates FW supports adaptive 11r roaming */ |
| WMI_SERVICE_CHAN_RF_CHARACTERIZATION_INFO = 208, /* FW provides RF scores for chans in the service ready extension msg */ |
| WMI_SERVICE_FW_IFACE_COMBINATION_SUPPORT = 209, /* FW sends WMI_IFACE_COMBINATION_IND_EVENT msg immediately after WMI_SERVICE_READY_EXT_EVENT msg */ |
| WMI_SERVICE_TX_COMPL_TSF64 = 210, /* FW supports 64-bit tx TSF in HTT_T2H TX_COMPL_IND msg */ |
| WMI_SERVICE_DSM_ROAM_FILTER = 211, /* FW supports data stall AP mitigation while roaming */ |
| WMI_SERVICE_PACKET_CAPTURE_SUPPORT = 212, /* target supports packet capture Mode (SMART MU) */ |
| WMI_SERVICE_PER_PEER_HTT_STATS_RESET = 213, /* FW supports HTT per peer stats reset facility */ |
| WMI_SERVICE_DELETE_ALL_PEER_SUPPORT = 214, /* target supports cmd to delete all peers within a vdev */ |
| WMI_SERVICE_DYNAMIC_HW_MODE_SWITCH_SUPPORT = 215, /* target supports Dynamic HW mode switch */ |
| WMI_SERVICE_MSDU_FLOW_OVERRIDE_BY_HOST = 216, /* target supports flow override feature */ |
| WMI_SERVICE_WMI_CHAN_RF_CHARACTERIZATION_INFO_EVENT= 217, /* target will send WMI_CHAN_RF_CHARACTERIZATION_INFO_EVENT */ |
| WMI_SERVICE_RX_FSE_SUPPORT = 218, /* target supports flow search through RxOLE FSE hw block */ |
| WMI_SERVICE_FREQINFO_IN_METADATA = 219, /* FW provides freq_info during spectral scan */ |
| WMI_SERVICE_EXT2_MSG = 220, /* WMI_SERVICE_READY_EXT2 msg is sent by target */ |
| WMI_SERVICE_WPA3_SAE_ROAM_SUPPORT = 221, /* Indicates FW supports WPA3 SAE roaming */ |
| WMI_SERVICE_WPA3_OWE_ROAM_SUPPORT = 222, /* Indicates FW supports WPA3 OWE roaming */ |
| WMI_SERVICE_AUDIO_AGGR = 223, /* Indicates FW supports audio frame aggregation */ |
| WMI_SERVICE_6GHZ_SUPPORT = 224, /* Indicates FW supports 6GHZ (scan, connection and so on) */ |
| /* WMI_SERVICE_QMI_STATS_SUPPORT |
| * Indicates FW supports stat request command WMI_REQUEST_LINK_STATS_CMDID |
| * and WMI_REQUEST_STATS_CMDID coming from QMI which will be used in |
| * runtime PM suspend. |
| */ |
| WMI_SERVICE_QMI_STATS_SUPPORT = 225, |
| WMI_SERVICE_CFR_CAPTURE_FILTER_SUPPORT = 226, /* Indicate FW Supports Channel Frequency Response (CFR) via WMI_CFR_CAPTURE_FILTER_CMDID */ |
| WMI_SERVICE_STA_BSS_MAX_IDLE_TIME = 227, /* Indicate FW supports BSS Max Idle time feature via WMI_VDEV_BSS_MAX_IDLE_TIME_CMDID */ |
| WMI_SERVICE_BIP_CIPHER_SUPPORT = 228, /* FW supports new BIP_CIPHER suites (WMI_CIPHER_BIP_xxx) */ |
| WMI_SERVICE_BW_165MHZ_SUPPORT = 229, /* Indicate FW supports bandwidth 165MHz (i.e. 6 GHz in addition to 2.4 and 5) */ |
| WMI_SERVICE_BW_RESTRICTED_80P80_SUPPORT = WMI_SERVICE_BW_165MHZ_SUPPORT, |
| WMI_SERVICE_NAN_NDI_SAP_SAP_SCC_SUPPORT = 230, /* Support SAP + SAP + NAN discovery + NDI concurrency in SCC mode */ |
| WMI_SERVICE_NAN_VDEV_SUPPORT = 231, /* indicates firmware is dependent on host to create NAN vdev */ |
| WMI_SERVICE_AUDIO_SYNC_SUPPORT = 232, /* Indicate FW supports Audio sync feature */ |
| WMI_SERVICE_DUAL_STA_ROAM_SUPPORT = 233, /* Indidate FW support dual STA roaming */ |
| WMI_SERVICE_PEER_CREATE_CONF = 234, /* Target will send WMI_PEER_CREATE_CONF_EVENTID after WMI_PEER_CREATE_CMDID is processed */ |
| WMI_SERVICE_MULTIPLE_VDEV_RESTART_RESPONSE_SUPPORT = 235, /* indicates firmware supports Multiple vdev restart response */ |
| WMI_SERVICE_ROAM_SCAN_CHANNEL_LIST_TO_HOST_SUPPORT = 236, /* Indicates firmware supports sending roam scan channel list to host */ |
| WMI_SERVICE_PEER_DELETE_NO_PEER_FLUSH_TIDS_CMD = 237, /* Host should not send WMI_PEER_FLUSH_TIDS_CMD as part of peer delete */ |
| WMI_SERVICE_NSS_RATIO_TO_HOST_SUPPORT = 238, /* Indicates firmware supports sending NSS ratio info to host */ |
| |
| |
| /******* ADD NEW SERVICES HERE *******/ |
| |
| WMI_MAX_EXT_SERVICE |
| |
| } WMI_SERVICE; |
| |
| #define WMI_SERVICE_BM_SIZE ((WMI_MAX_SERVICE + sizeof(A_UINT32)- 1)/sizeof(A_UINT32)) |
| |
| #define WMI_NUM_EXT_SERVICES (WMI_MAX_EXT_SERVICE - WMI_MAX_SERVICE) |
| |
| /* |
| * TEMPORARY WORKAROUND |
| * Virtually all branches of the target utilize an incorrect check on |
| * the value of WMI_SERVICE_EXT_BM_SIZE32, checking that |
| * WMI_SERVICE_EXT_BM_SIZE32 < 4, rather than WMI_SERVICE_EXT_BM_SIZE32 <= 4. |
| * Until all target branches are fixed, this check is being disabled |
| * by artificially setting WMI_SERVICE_EXT_BM_SIZE32 to 0, rather than |
| * the number of 4-byte words required for holding the WMI extension |
| * service flags. |
| */ |
| #if 0 |
| #define WMI_SERVICE_EXT_BM_SIZE32 ((WMI_NUM_EXT_SERVICES + 31) / 32) |
| #else |
| #define WMI_SERVICE_EXT_BM_SIZE32 0 |
| #endif |
| |
| #define WMI_SERVICE_ROAM_OFFLOAD WMI_SERVICE_ROAM_SCAN_OFFLOAD /* depreciated the name WMI_SERVICE_ROAM_OFFLOAD, but here to help compiling with old host driver */ |
| |
| /* |
| * turn on the WMI service bit corresponding to the WMI service. |
| */ |
| #define WMI_SERVICE_ENABLE(pwmi_svc_bmap,svc_id) \ |
| ( (pwmi_svc_bmap)[(svc_id)/(sizeof(A_UINT32))] |= \ |
| (1 << ((svc_id)%(sizeof(A_UINT32)))) ) |
| |
| #define WMI_SERVICE_DISABLE(pwmi_svc_bmap,svc_id) \ |
| ( (pwmi_svc_bmap)[(svc_id)/(sizeof(A_UINT32))] &= \ |
| ( ~(1 << ((svc_id)%(sizeof(A_UINT32)))) ) ) |
| |
| #define WMI_SERVICE_IS_ENABLED(pwmi_svc_bmap,svc_id) \ |
| ( ((pwmi_svc_bmap)[(svc_id)/(sizeof(A_UINT32))] & \ |
| (1 << ((svc_id)%(sizeof(A_UINT32)))) ) != 0) |
| |
| |
| #define WMI_SERVICE_EXT_ENABLE(pwmi_svc_bmap, pwmi_svc_ext_bmap, svc_id) \ |
| do { \ |
| if (svc_id < WMI_MAX_SERVICE) { \ |
| WMI_SERVICE_ENABLE(pwmi_svc_bmap, svc_id); \ |
| } else { \ |
| int word = ((svc_id) - WMI_MAX_SERVICE) / 32; \ |
| int bit = (svc_id) & 0x1f; /* svc_id mod 32 */ \ |
| (pwmi_svc_ext_bmap)[word] |= (1 << bit); \ |
| } \ |
| } while (0) |
| |
| #define WMI_SERVICE_EXT_DISABLE(pwmi_svc_bmap, pwmi_svc_ext_bmap, svc_id) \ |
| do { \ |
| if (svc_id < WMI_MAX_SERVICE) { \ |
| WMI_SERVICE_DISABLE(pwmi_svc_bmap, svc_id); \ |
| } else { \ |
| int word = ((svc_id) - WMI_MAX_SERVICE) / 32; \ |
| int bit = (svc_id) & 0x1f; /* svc_id mod 32 */ \ |
| (pwmi_svc_ext_bmap)[word] &= ~(1 << bit); \ |
| } \ |
| } while (0) |
| |
| #define WMI_SERVICE_EXT_IS_ENABLED(pwmi_svc_bmap, pwmi_svc_ext_bmap, svc_id) \ |
| /* If the service ID is beyond the known limit, treat it as disabled */ \ |
| ((svc_id) >= WMI_MAX_EXT_SERVICE ? 0 : \ |
| /* If service ID is in the non-extension range, use the old check */ \ |
| (svc_id) < WMI_MAX_SERVICE ? \ |
| WMI_SERVICE_IS_ENABLED(pwmi_svc_bmap, svc_id) : \ |
| /* If service ID is in the extended range, check ext_bmap */ \ |
| (((pwmi_svc_ext_bmap)[((svc_id) - WMI_MAX_SERVICE) / 32] >> \ |
| ((svc_id) & 0x1f)) & 0x1)) |
| |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /*_WMI_SERVICES_H_*/ |
