| /* |
| * Copyright (c) 2019 The Linux Foundation. All rights reserved. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for |
| * any purpose with or without fee is hereby granted, provided that the |
| * above copyright notice and this permission notice appear in all |
| * copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL |
| * WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE |
| * AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL |
| * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR |
| * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR |
| * PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| // |
| // DO NOT EDIT! This file is automatically generated |
| // These definitions are tied to a particular hardware layout |
| |
| |
| #ifndef _RECEIVE_USER_INFO_H_ |
| #define _RECEIVE_USER_INFO_H_ |
| #if !defined(__ASSEMBLER__) |
| #endif |
| |
| |
| // ################ START SUMMARY ################# |
| // |
| // Dword Fields |
| // 0 phy_ppdu_id[15:0], user_rssi[23:16], pkt_type[27:24], stbc[28], reception_type[31:29] |
| // 1 rate_mcs[3:0], sgi[5:4], receive_bandwidth[7:6], mimo_ss_bitmap[15:8], ofdma_ru_allocation[23:16], ofdma_user_index[30:24], ofdma_content_channel[31] |
| // 2 ldpc[0], ru_width[7:1], reserved_2a[31:8] |
| // |
| // ################ END SUMMARY ################# |
| |
| #define NUM_OF_DWORDS_RECEIVE_USER_INFO 3 |
| |
| struct receive_user_info { |
| uint32_t phy_ppdu_id : 16, //[15:0] |
| user_rssi : 8, //[23:16] |
| pkt_type : 4, //[27:24] |
| stbc : 1, //[28] |
| reception_type : 3; //[31:29] |
| uint32_t rate_mcs : 4, //[3:0] |
| sgi : 2, //[5:4] |
| receive_bandwidth : 2, //[7:6] |
| mimo_ss_bitmap : 8, //[15:8] |
| ofdma_ru_allocation : 8, //[23:16] |
| ofdma_user_index : 7, //[30:24] |
| ofdma_content_channel : 1; //[31] |
| uint32_t ldpc : 1, //[0] |
| ru_width : 7, //[7:1] |
| reserved_2a : 24; //[31:8] |
| }; |
| |
| /* |
| |
| phy_ppdu_id |
| |
| A ppdu counter value that PHY increments for every PPDU |
| received. The counter value wraps around |
| |
| <legal all> |
| |
| user_rssi |
| |
| RSSI for this user |
| |
| Frequency domain RSSI measurement for this user. Based |
| on the channel estimate. |
| |
| |
| |
| <legal all> |
| |
| pkt_type |
| |
| Packet type: |
| |
| |
| |
| <enum 0 dot11a>802.11a PPDU type |
| |
| <enum 1 dot11b>802.11b PPDU type |
| |
| <enum 2 dot11n_mm>802.11n Mixed Mode PPDU type |
| |
| <enum 3 dot11ac>802.11ac PPDU type |
| |
| <enum 4 dot11ax>802.11ax PPDU type |
| |
| <enum 5 dot11ba>802.11ba (WUR) PPDU type |
| |
| stbc |
| |
| When set, use STBC transmission rates |
| |
| reception_type |
| |
| Indicates what type of reception this is. |
| |
| <enum 0 reception_type_SU > Basic SU reception (not |
| part of OFDMA or MU-MIMO) |
| |
| <enum 1 reception_type_MU_MIMO > This is related to |
| DL type of reception |
| |
| <enum 2 reception_type_MU_OFDMA > This is related |
| to DL type of reception |
| |
| <enum 3 reception_type_MU_OFDMA_MIMO > This is |
| related to DL type of reception |
| |
| <enum 4 reception_type_UL_MU_MIMO > This is related |
| to UL type of reception |
| |
| <enum 5 reception_type_UL_MU_OFDMA > This is |
| related to UL type of reception |
| |
| <enum 6 reception_type_UL_MU_OFDMA_MIMO > This is |
| related to UL type of reception |
| |
| |
| |
| <legal 0-6> |
| |
| rate_mcs |
| |
| For details, refer to MCS_TYPE description |
| |
| <legal all> |
| |
| sgi |
| |
| Field only valid when pkt type is HT, VHT or HE. |
| |
| |
| |
| <enum 0 gi_0_8_us > Legacy normal GI. Can also be |
| used for HE |
| |
| <enum 1 gi_0_4_us > Legacy short GI. Can also be |
| used for HE |
| |
| <enum 2 gi_1_6_us > HE related GI |
| |
| <enum 3 gi_3_2_us > HE related GI |
| |
| <legal 0 - 3> |
| |
| receive_bandwidth |
| |
| Full receive Bandwidth |
| |
| |
| |
| <enum 0 full_rx_bw_20_mhz> |
| |
| <enum 1 full_rx_bw_40_mhz> |
| |
| <enum 2 full_rx_bw_80_mhz> |
| |
| <enum 3 full_rx_bw_160_mhz> |
| |
| |
| |
| <legal 0-3> |
| |
| mimo_ss_bitmap |
| |
| Bitmap, with each bit indicating if the related spatial |
| stream is used for this STA |
| |
| LSB related to SS 0 |
| |
| |
| |
| 0: spatial stream not used for this reception |
| |
| 1: spatial stream used for this reception |
| |
| |
| |
| <legal all> |
| |
| ofdma_ru_allocation |
| |
| Field only valid in case of OFDMA type receptions (DL |
| and UL) |
| |
| |
| |
| Indicates the RU number associated with this user. |
| |
| |
| |
| In case of reception where the transmission was DL MU |
| OFDMA, this field provides the RU pattern. Note that fields |
| ofdma_user_index and ofdma_content_channel are needed to |
| determine which RU (within a 40 MHz channel) was actually |
| assigned to this user, but this does not give info on which |
| 40 MHz channel was assigned to this user. Please refer |
| DL_ofdma_ru_* in PHYRX_PKT_END_INFO for complete RU info for |
| this user. |
| |
| |
| |
| In case of reception where the transmission was UL MU |
| OFDMA, PHY is recommended to insert the RU start index in |
| this field. Note that PHY may insert the RU width in |
| Reserved_2a[6:0]. |
| |
| <legal all> |
| |
| ofdma_user_index |
| |
| Field only valid in the of DL MU OFDMA reception |
| |
| |
| |
| The user number within the RU_allocation. |
| |
| |
| |
| This is needed for SW to determine the exact RU position |
| within the reception. |
| |
| <legal all> |
| |
| ofdma_content_channel |
| |
| Field only valid in the of DL MU OFDMA/MIMO reception |
| |
| |
| |
| In case of DL MU reception, this field indicates the |
| content channel number where PHY found the RU information |
| for this user |
| |
| |
| |
| This is needed for SW to determine the exact RU position |
| within the reception. |
| |
| |
| |
| <enum 0 content_channel_1> |
| |
| <enum 1 content_channel_2> |
| |
| |
| |
| <legal all> |
| |
| ldpc |
| |
| When set, use LDPC transmission rates were used. |
| |
| <legal all> |
| |
| ru_width |
| |
| In case of UL OFDMA reception, PHY is recommended to |
| insert the RU width |
| |
| In Hastings80: was using Reserved_2a[6:0]. |
| |
| <legal 1 - 74> |
| |
| reserved_2a |
| |
| <legal 0> |
| */ |
| |
| |
| /* Description RECEIVE_USER_INFO_0_PHY_PPDU_ID |
| |
| A ppdu counter value that PHY increments for every PPDU |
| received. The counter value wraps around |
| |
| <legal all> |
| */ |
| #define RECEIVE_USER_INFO_0_PHY_PPDU_ID_OFFSET 0x00000000 |
| #define RECEIVE_USER_INFO_0_PHY_PPDU_ID_LSB 0 |
| #define RECEIVE_USER_INFO_0_PHY_PPDU_ID_MASK 0x0000ffff |
| |
| /* Description RECEIVE_USER_INFO_0_USER_RSSI |
| |
| RSSI for this user |
| |
| Frequency domain RSSI measurement for this user. Based |
| on the channel estimate. |
| |
| |
| |
| <legal all> |
| */ |
| #define RECEIVE_USER_INFO_0_USER_RSSI_OFFSET 0x00000000 |
| #define RECEIVE_USER_INFO_0_USER_RSSI_LSB 16 |
| #define RECEIVE_USER_INFO_0_USER_RSSI_MASK 0x00ff0000 |
| |
| /* Description RECEIVE_USER_INFO_0_PKT_TYPE |
| |
| Packet type: |
| |
| |
| |
| <enum 0 dot11a>802.11a PPDU type |
| |
| <enum 1 dot11b>802.11b PPDU type |
| |
| <enum 2 dot11n_mm>802.11n Mixed Mode PPDU type |
| |
| <enum 3 dot11ac>802.11ac PPDU type |
| |
| <enum 4 dot11ax>802.11ax PPDU type |
| |
| <enum 5 dot11ba>802.11ba (WUR) PPDU type |
| */ |
| #define RECEIVE_USER_INFO_0_PKT_TYPE_OFFSET 0x00000000 |
| #define RECEIVE_USER_INFO_0_PKT_TYPE_LSB 24 |
| #define RECEIVE_USER_INFO_0_PKT_TYPE_MASK 0x0f000000 |
| |
| /* Description RECEIVE_USER_INFO_0_STBC |
| |
| When set, use STBC transmission rates |
| */ |
| #define RECEIVE_USER_INFO_0_STBC_OFFSET 0x00000000 |
| #define RECEIVE_USER_INFO_0_STBC_LSB 28 |
| #define RECEIVE_USER_INFO_0_STBC_MASK 0x10000000 |
| |
| /* Description RECEIVE_USER_INFO_0_RECEPTION_TYPE |
| |
| Indicates what type of reception this is. |
| |
| <enum 0 reception_type_SU > Basic SU reception (not |
| part of OFDMA or MU-MIMO) |
| |
| <enum 1 reception_type_MU_MIMO > This is related to |
| DL type of reception |
| |
| <enum 2 reception_type_MU_OFDMA > This is related |
| to DL type of reception |
| |
| <enum 3 reception_type_MU_OFDMA_MIMO > This is |
| related to DL type of reception |
| |
| <enum 4 reception_type_UL_MU_MIMO > This is related |
| to UL type of reception |
| |
| <enum 5 reception_type_UL_MU_OFDMA > This is |
| related to UL type of reception |
| |
| <enum 6 reception_type_UL_MU_OFDMA_MIMO > This is |
| related to UL type of reception |
| |
| |
| |
| <legal 0-6> |
| */ |
| #define RECEIVE_USER_INFO_0_RECEPTION_TYPE_OFFSET 0x00000000 |
| #define RECEIVE_USER_INFO_0_RECEPTION_TYPE_LSB 29 |
| #define RECEIVE_USER_INFO_0_RECEPTION_TYPE_MASK 0xe0000000 |
| |
| /* Description RECEIVE_USER_INFO_1_RATE_MCS |
| |
| For details, refer to MCS_TYPE description |
| |
| <legal all> |
| */ |
| #define RECEIVE_USER_INFO_1_RATE_MCS_OFFSET 0x00000004 |
| #define RECEIVE_USER_INFO_1_RATE_MCS_LSB 0 |
| #define RECEIVE_USER_INFO_1_RATE_MCS_MASK 0x0000000f |
| |
| /* Description RECEIVE_USER_INFO_1_SGI |
| |
| Field only valid when pkt type is HT, VHT or HE. |
| |
| |
| |
| <enum 0 gi_0_8_us > Legacy normal GI. Can also be |
| used for HE |
| |
| <enum 1 gi_0_4_us > Legacy short GI. Can also be |
| used for HE |
| |
| <enum 2 gi_1_6_us > HE related GI |
| |
| <enum 3 gi_3_2_us > HE related GI |
| |
| <legal 0 - 3> |
| */ |
| #define RECEIVE_USER_INFO_1_SGI_OFFSET 0x00000004 |
| #define RECEIVE_USER_INFO_1_SGI_LSB 4 |
| #define RECEIVE_USER_INFO_1_SGI_MASK 0x00000030 |
| |
| /* Description RECEIVE_USER_INFO_1_RECEIVE_BANDWIDTH |
| |
| Full receive Bandwidth |
| |
| |
| |
| <enum 0 full_rx_bw_20_mhz> |
| |
| <enum 1 full_rx_bw_40_mhz> |
| |
| <enum 2 full_rx_bw_80_mhz> |
| |
| <enum 3 full_rx_bw_160_mhz> |
| |
| |
| |
| <legal 0-3> |
| */ |
| #define RECEIVE_USER_INFO_1_RECEIVE_BANDWIDTH_OFFSET 0x00000004 |
| #define RECEIVE_USER_INFO_1_RECEIVE_BANDWIDTH_LSB 6 |
| #define RECEIVE_USER_INFO_1_RECEIVE_BANDWIDTH_MASK 0x000000c0 |
| |
| /* Description RECEIVE_USER_INFO_1_MIMO_SS_BITMAP |
| |
| Bitmap, with each bit indicating if the related spatial |
| stream is used for this STA |
| |
| LSB related to SS 0 |
| |
| |
| |
| 0: spatial stream not used for this reception |
| |
| 1: spatial stream used for this reception |
| |
| |
| |
| <legal all> |
| */ |
| #define RECEIVE_USER_INFO_1_MIMO_SS_BITMAP_OFFSET 0x00000004 |
| #define RECEIVE_USER_INFO_1_MIMO_SS_BITMAP_LSB 8 |
| #define RECEIVE_USER_INFO_1_MIMO_SS_BITMAP_MASK 0x0000ff00 |
| |
| /* Description RECEIVE_USER_INFO_1_OFDMA_RU_ALLOCATION |
| |
| Field only valid in case of OFDMA type receptions (DL |
| and UL) |
| |
| |
| |
| Indicates the RU number associated with this user. |
| |
| |
| |
| In case of reception where the transmission was DL MU |
| OFDMA, this field provides the RU pattern. Note that fields |
| ofdma_user_index and ofdma_content_channel are needed to |
| determine which RU (within a 40 MHz channel) was actually |
| assigned to this user, but this does not give info on which |
| 40 MHz channel was assigned to this user. Please refer |
| DL_ofdma_ru_* in PHYRX_PKT_END_INFO for complete RU info for |
| this user. |
| |
| |
| |
| In case of reception where the transmission was UL MU |
| OFDMA, PHY is recommended to insert the RU start index in |
| this field. Note that PHY may insert the RU width in |
| Reserved_2a[6:0]. |
| |
| <legal all> |
| */ |
| #define RECEIVE_USER_INFO_1_OFDMA_RU_ALLOCATION_OFFSET 0x00000004 |
| #define RECEIVE_USER_INFO_1_OFDMA_RU_ALLOCATION_LSB 16 |
| #define RECEIVE_USER_INFO_1_OFDMA_RU_ALLOCATION_MASK 0x00ff0000 |
| |
| /* Description RECEIVE_USER_INFO_1_OFDMA_USER_INDEX |
| |
| Field only valid in the of DL MU OFDMA reception |
| |
| |
| |
| The user number within the RU_allocation. |
| |
| |
| |
| This is needed for SW to determine the exact RU position |
| within the reception. |
| |
| <legal all> |
| */ |
| #define RECEIVE_USER_INFO_1_OFDMA_USER_INDEX_OFFSET 0x00000004 |
| #define RECEIVE_USER_INFO_1_OFDMA_USER_INDEX_LSB 24 |
| #define RECEIVE_USER_INFO_1_OFDMA_USER_INDEX_MASK 0x7f000000 |
| |
| /* Description RECEIVE_USER_INFO_1_OFDMA_CONTENT_CHANNEL |
| |
| Field only valid in the of DL MU OFDMA/MIMO reception |
| |
| |
| |
| In case of DL MU reception, this field indicates the |
| content channel number where PHY found the RU information |
| for this user |
| |
| |
| |
| This is needed for SW to determine the exact RU position |
| within the reception. |
| |
| |
| |
| <enum 0 content_channel_1> |
| |
| <enum 1 content_channel_2> |
| |
| |
| |
| <legal all> |
| */ |
| #define RECEIVE_USER_INFO_1_OFDMA_CONTENT_CHANNEL_OFFSET 0x00000004 |
| #define RECEIVE_USER_INFO_1_OFDMA_CONTENT_CHANNEL_LSB 31 |
| #define RECEIVE_USER_INFO_1_OFDMA_CONTENT_CHANNEL_MASK 0x80000000 |
| |
| /* Description RECEIVE_USER_INFO_2_LDPC |
| |
| When set, use LDPC transmission rates were used. |
| |
| <legal all> |
| */ |
| #define RECEIVE_USER_INFO_2_LDPC_OFFSET 0x00000008 |
| #define RECEIVE_USER_INFO_2_LDPC_LSB 0 |
| #define RECEIVE_USER_INFO_2_LDPC_MASK 0x00000001 |
| |
| /* Description RECEIVE_USER_INFO_2_RU_WIDTH |
| |
| In case of UL OFDMA reception, PHY is recommended to |
| insert the RU width |
| |
| In Hastings80: was using Reserved_2a[6:0]. |
| |
| <legal 1 - 74> |
| */ |
| #define RECEIVE_USER_INFO_2_RU_WIDTH_OFFSET 0x00000008 |
| #define RECEIVE_USER_INFO_2_RU_WIDTH_LSB 1 |
| #define RECEIVE_USER_INFO_2_RU_WIDTH_MASK 0x000000fe |
| |
| /* Description RECEIVE_USER_INFO_2_RESERVED_2A |
| |
| <legal 0> |
| */ |
| #define RECEIVE_USER_INFO_2_RESERVED_2A_OFFSET 0x00000008 |
| #define RECEIVE_USER_INFO_2_RESERVED_2A_LSB 8 |
| #define RECEIVE_USER_INFO_2_RESERVED_2A_MASK 0xffffff00 |
| |
| |
| #endif // _RECEIVE_USER_INFO_H_ |