Google Git
Sign in
android / kernel / msm-modules / sec_touch / refs/tags/android-s-qpr3-beta-2_r0.3 / . / sec_ts.c
blob: 32b5d1d1f8764c102384cdce04007f76d8e31d10 [file] [log] [blame]
/* drivers/input/touchscreen/sec_ts.c
*
* Copyright (C) 2011 Samsung Electronics Co., Ltd.
* http://www.samsungsemi.com/
*
* Core file for Samsung TSC driver
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
struct sec_ts_data *tsp_info;
#include "sec_ts.h"
/* Switch GPIO values */
#define SEC_SWITCH_GPIO_VALUE_SLPI_MASTER 1
#define SEC_SWITCH_GPIO_VALUE_AP_MASTER 0
struct sec_ts_data *ts_dup;
#ifndef CONFIG_SEC_SYSFS
/* Declare extern sec_class */
struct class *sec_class;
#endif
#ifdef USE_POWER_RESET_WORK
static void sec_ts_reset_work(struct work_struct *work);
#endif
static void sec_ts_fw_update_work(struct work_struct *work);
static void sec_ts_suspend_work(struct work_struct *work);
static void sec_ts_resume_work(struct work_struct *work);
static void sec_ts_charger_work(struct work_struct *work);
#ifdef USE_OPEN_CLOSE
static int sec_ts_input_open(struct input_dev *dev);
static void sec_ts_input_close(struct input_dev *dev);
#endif
int sec_ts_read_information(struct sec_ts_data *ts);
#ifndef I2C_INTERFACE
int sec_ts_spi_delay(u8 reg)
{
switch (reg) {
case SEC_TS_READ_TOUCH_RAWDATA:
return 400;
case SEC_TS_CMD_HEATMAP_READ:
return 500;
case SEC_TS_READ_ALL_EVENT:
return 500;
case SEC_TS_READ_CSRAM_RTDP_DATA:
return 500;
case SEC_TS_CAAT_READ_STORED_DATA:
return 500;
case SEC_TS_CMD_FLASH_READ_DATA:
return 1800;
case SEC_TS_READ_FIRMWARE_INTEGRITY:
return 20*1000;
case SEC_TS_READ_SELFTEST_RESULT:
return 3500;
default: return 100;
}
}
int sec_ts_spi_post_delay(u8 reg)
{
switch (reg) {
case SEC_TS_READ_TOUCH_RAWDATA:
case SEC_TS_CMD_FLASH_READ_DATA:
case SEC_TS_READ_SELFTEST_RESULT:
return 500;
default: return 0;
}
}
#endif
int sec_ts_write(struct sec_ts_data *ts, u8 reg, u8 *data, int len)
{
u8 *buf;
int ret;
unsigned char retry;
#ifdef I2C_INTERFACE
struct i2c_msg msg;
#else
struct spi_message msg;
struct spi_transfer transfer[1] = { { 0 } };
unsigned int i;
unsigned int spi_len = 0;
unsigned char checksum = 0x0;
#endif
if (ts->power_status == SEC_TS_STATE_POWER_OFF) {
input_err(true, &ts->client->dev,
"%s: POWER_STATUS : OFF\n", __func__);
goto err;
}
#ifdef I2C_INTERFACE
if (len + 1 > sizeof(ts->io_write_buf)) {
input_err(true, &ts->client->dev,
"%s: len is larger than buffer size\n", __func__);
return -EINVAL;
}
#else
/* add 3 zero stuffing tx bytes at last */
if (SEC_TS_SPI_HEADER_SIZE + 1 + len + SEC_TS_SPI_CHECKSUM_SIZE + 3 >
sizeof(ts->io_write_buf)) {
input_err(true, &ts->client->dev,
"%s: len is larger than buffer size\n", __func__);
return -EINVAL;
}
#endif
mutex_lock(&ts->io_mutex);
buf = ts->io_write_buf;
#ifdef I2C_INTERFACE
buf[0] = reg;
memcpy(buf + 1, data, len);
msg.addr = ts->client->addr;
msg.flags = 0;
msg.len = len + 1;
msg.buf = buf;
#else
buf[0] = SEC_TS_SPI_SYNC_CODE;
buf[1] = ((len + 1) >> 8) & 0xFF;
buf[2] = (len + 1) & 0xFF;
buf[3] = 0x00;
buf[4] = 0x00;
buf[5] = reg;
memcpy(buf + SEC_TS_SPI_HEADER_SIZE + 1, data, len);
spi_len = SEC_TS_SPI_HEADER_SIZE + 1 + len;
// spi_len = SPI header size(5)+register(1)+data size(len)
for (i = 0; i < spi_len ; i++)
checksum += buf[i];
buf[spi_len++] = checksum;
// spi_len += checksum(1)
spi_message_init(&msg);
/* add 3 zero stuffing tx bytes at last */
memset(ts->io_write_buf + spi_len, 0x00, 3);
/* spi transfer size should be multiple of 4
**/
spi_len = (spi_len + 3) & ~3;
transfer[0].len = spi_len;
transfer[0].tx_buf = buf;
transfer[0].rx_buf = NULL;
spi_message_add_tail(&transfer[0], &msg);
#ifdef SEC_TS_DEBUG_IO
input_info(true, &ts->client->dev, "%s: ", __func__);
// for (i = 0; i < SEC_TS_SPI_HEADER_SIZE + 1 + len + 1; i++)
for (i = 0; i < 8; i++)
input_info(true, &ts->client->dev, "%X ", buf[i]);
input_info(true, &ts->client->dev, "\n");
#endif
#endif
for (retry = 0; retry < SEC_TS_IO_RETRY_CNT; retry++) {
#ifdef I2C_INTERFACE
if ((ret = i2c_transfer(ts->client->adapter, &msg, 1)) == 1)
break;
#else
if ((ret = spi_sync(ts->client, &msg)) == 0)
break;
#endif
if (ts->power_status == SEC_TS_STATE_POWER_OFF) {
input_err(true, &ts->client->dev,
"%s: POWER_STATUS : OFF, retry:%d\n",
__func__, retry);
mutex_unlock(&ts->io_mutex);
goto err;
}
usleep_range(1 * 1000, 1 * 1000);
if (retry > 1) {
input_err(true, &ts->client->dev,
"%s: retry %d\n", __func__, retry + 1);
ts->comm_err_count++;
}
}
mutex_unlock(&ts->io_mutex);
if (retry == SEC_TS_IO_RETRY_CNT) {
input_err(true, &ts->client->dev,
"%s: write over retry limit\n", __func__);
ret = -EIO;
#ifdef USE_POR_AFTER_I2C_RETRY
if (ts->probe_done && !ts->reset_is_on_going)
schedule_delayed_work(&ts->reset_work,
msecs_to_jiffies(TOUCH_RESET_DWORK_TIME));
#endif
}
#ifdef I2C_INTERFACE
if (ret == 1)
#else
if (ret == 0)
#endif
return 0;
err:
return -EIO;
}
static int sec_ts_read_internal(struct sec_ts_data *ts, u8 reg,
u8 *data, int len, bool dma_safe)
{
u8 *buf;
int ret;
unsigned char retry;
#ifdef I2C_INTERFASCE
struct i2c_msg msg[2];
#else
struct spi_message msg;
struct spi_transfer transfer[1] = { { 0 } };
unsigned int i;
unsigned int spi_write_len = 0, spi_read_len = 0;
unsigned char write_checksum = 0x0, read_checksum = 0x0;
int copy_size = 0, copy_cur = 0;
#endif
int remain = len;
if (ts->power_status == SEC_TS_STATE_POWER_OFF) {
input_err(true, &ts->client->dev,
"%s: POWER_STATUS : OFF\n", __func__);
goto err;
}
#ifndef I2C_INTERFACE
/* add 3 zero stuffing tx bytes at last */
if (SEC_TS_SPI_HEADER_SIZE + 1 + SEC_TS_SPI_CHECKSUM_SIZE + 3 >
sizeof(ts->io_write_buf)) {
input_err(true, &ts->client->dev,
"%s: len is larger than buffer size\n", __func__);
return -EINVAL;
}
#endif
if (len > sizeof(ts->io_read_buf) && dma_safe == false) {
input_err(true, &ts->client->dev,
"%s: len %d over pre-allocated size %d\n",
__func__, len, IO_PREALLOC_READ_BUF_SZ);
return -ENOSPC;
}
mutex_lock(&ts->io_mutex);
buf = ts->io_write_buf;
#ifdef I2C_INTERFACE
buf[0] = reg;
msg[0].addr = ts->client->addr;
msg[0].flags = 0;
msg[0].len = 1;
msg[0].buf = buf;
msg[1].addr = ts->client->addr;
msg[1].flags = I2C_M_RD;
msg[1].len = len;
if (dma_safe == false)
msg[1].buf = ts->io_read_buf;
else
msg[1].buf = data;
#else
buf[0] = SEC_TS_SPI_SYNC_CODE;
buf[1] = 0x00;
buf[2] = 0x01;
buf[3] = (len >> 8) & 0xFF;
buf[4] = len & 0xFF;
buf[5] = reg;
spi_write_len = SEC_TS_SPI_HEADER_SIZE + 1;
for (i = 0; i < spi_write_len; i++)
write_checksum += buf[i];
buf[spi_write_len] = write_checksum;
spi_write_len += SEC_TS_SPI_CHECKSUM_SIZE;
/* add 3 zero stuffing tx bytes at last */
memset(ts->io_write_buf + spi_write_len, 0x00, 3);
spi_write_len = (spi_write_len + 3) & ~3;
spi_read_len = len +
SEC_TS_SPI_READ_HEADER_SIZE + SEC_TS_SPI_CHECKSUM_SIZE;
spi_read_len = (spi_read_len + 3) & ~3;
#endif
if (len <= ts->io_burstmax) {
#ifdef I2C_INTERFACE
for (retry = 0; retry < SEC_TS_IO_RETRY_CNT; retry++) {
ret = i2c_transfer(ts->client->adapter, msg, 2);
if (ret == 2)
break;
usleep_range(1 * 1000, 1 * 1000);
if (ts->power_status == SEC_TS_STATE_POWER_OFF) {
input_err(true, &ts->client->dev,
"%s: POWER_STATUS : OFF, retry:%d\n",
__func__, retry);
mutex_unlock(&ts->io_mutex);
goto err;
}
if (retry > 1) {
input_err(true, &ts->client->dev,
"%s: retry %d\n", __func__, retry + 1);
ts->comm_err_count++;
}
}
if (ret == 2 && dma_safe == false)
memcpy(data,
ts->io_read_buf[SEC_TS_SPI_READ_HEADER_SIZE],
len);
#else
for (retry = 0; retry < SEC_TS_IO_RETRY_CNT; retry++) {
spi_message_init(&msg);
// spi transfer size should be multiple of 4
transfer[0].len = spi_write_len;
transfer[0].tx_buf = buf;
transfer[0].rx_buf = NULL;
spi_message_add_tail(&transfer[0], &msg);
ret = spi_sync(ts->client, &msg);
#ifdef SEC_TS_DEBUG_IO
input_info(true, &ts->client->dev,
"%s: spi write buf %X %X %X %X %X %X %X\n",
__func__, buf[0], buf[1], buf[2],
buf[3], buf[4], buf[5], buf[6]);
#endif
// write fail
if (ret != 0) {
ret = -EIO;
input_err(true, &ts->client->dev,
"%s: spi write retry %d\n",
__func__, retry + 1);
ts->comm_err_count++;
usleep_range(1 * 1000, 1 * 1000);
if (ts->power_status ==
SEC_TS_STATE_POWER_OFF) {
input_err(true, &ts->client->dev,
"%s: POWER_STATUS : OFF, retry:%d\n",
__func__, retry);
mutex_unlock(&ts->io_mutex);
goto err;
}
if (retry == SEC_TS_IO_RETRY_CNT - 1) {
input_err(true, &ts->client->dev,
"%s: write reg retry over retry limit, skip read\n",
__func__);
goto skip_spi_read;
}
continue;
}
usleep_range(sec_ts_spi_delay(reg),
sec_ts_spi_delay(reg) + 1);
// read sequence start
spi_message_init(&msg);
transfer[0].len = spi_read_len;
transfer[0].tx_buf = NULL;
transfer[0].rx_buf = ts->io_read_buf;
spi_message_add_tail(&transfer[0], &msg);
ret = spi_sync(ts->client, &msg);
for (i = 0, read_checksum = 0x0;
i < (SEC_TS_SPI_READ_HEADER_SIZE + len);
i++)
read_checksum += ts->io_read_buf[i];
#ifdef SEC_TS_DEBUG_IO
input_info(true, &ts->client->dev, "%s: ", __func__);
// for (i = 0; i < spi_read_len; i++)
for (i = 0; i < 8; i++)
input_info(true, &ts->client->dev,
"%X ",
ts->io_read_buf[i]);
input_info(true, &ts->client->dev,
"\n%s: checksum = %X",
__func__, read_checksum);
#endif
// read fail
if (ret != 0 ||
ts->io_read_buf[0] != SEC_TS_SPI_SYNC_CODE ||
reg != ts->io_read_buf[5] ||
// ts->io_read_buf[6] != SEC_TS_SPI_CMD_OK ||
read_checksum !=
ts->io_read_buf[
SEC_TS_SPI_READ_HEADER_SIZE +
len]) {
ret = -EIO;
input_err(true, &ts->client->dev,
"%s: retry %d\n",
__func__, retry + 1);
ts->comm_err_count++;
usleep_range(1 * 1000, 1 * 1000);
if (ts->power_status ==
SEC_TS_STATE_POWER_OFF) {
input_err(true, &ts->client->dev,
"%s: POWER_STATUS : OFF, retry:%d\n",
__func__, retry);
mutex_unlock(&ts->io_mutex);
goto err;
}
continue;
} else
break;
}
if (ret == 0)
memcpy(data, ts->io_read_buf +
SEC_TS_SPI_READ_HEADER_SIZE, len);
usleep_range(sec_ts_spi_post_delay(reg),
sec_ts_spi_post_delay(reg) + 1);
#endif //I2C_INTERFACE
} else {
/*
* read buffer is 256 byte. do not support long buffer over
* than 256. So, try to separate reading data about 256 bytes.
**/
#ifdef I2C_INTERFACE
for (retry = 0; retry < SEC_TS_IO_RETRY_CNT; retry++) {
ret = i2c_transfer(ts->client->adapter, msg, 1);
if (ret == 1)
break;
usleep_range(1 * 1000, 1 * 1000);
if (ts->power_status == SEC_TS_STATE_POWER_OFF) {
input_err(true, &ts->client->dev,
"%s: POWER_STATUS : OFF, retry:%d\n",
__func__, retry);
mutex_unlock(&ts->io_mutex);
goto err;
}
if (retry > 1) {
input_err(true, &ts->client->dev,
"%s: retry %d\n",
__func__, retry + 1);
ts->comm_err_count++;
}
}
do {
if (remain > ts->io_burstmax)
msg[1].len = ts->io_burstmax;
else
msg[1].len = remain;
remain -= ts->io_burstmax;
for (retry = 0; retry < SEC_TS_IO_RETRY_CNT; retry++) {
ret = i2c_transfer(ts->client->adapter,
&msg[1], 1);
if (ret == 1)
break;
usleep_range(1 * 1000, 1 * 1000);
if (ts->power_status ==
SEC_TS_STATE_POWER_OFF) {
input_err(true, &ts->client->dev,
"%s: POWER_STATUS : OFF, retry:%d\n",
__func__, retry);
mutex_unlock(&ts->io_mutex);
goto err;
}
if (retry > 1) {
input_err(true, &ts->client->dev,
"%s: retry %d\n",
__func__, retry + 1);
ts->comm_err_count++;
}
}
msg[1].buf += msg[1].len;
} while (remain > 0);
if (ret == 1 && dma_safe == false)
memcpy(data, ts->io_read_buf, len);
#else
for (retry = 0; retry < SEC_TS_IO_RETRY_CNT; retry++) {
spi_message_init(&msg);
// spi transfer size should be multiple of 4
transfer[0].len = spi_write_len;
transfer[0].tx_buf = buf;
transfer[0].rx_buf = NULL;
spi_message_add_tail(&transfer[0], &msg);
ret = spi_sync(ts->client, &msg);
// write fail
if (ret != 0) {
ret = -EIO;
input_err(true, &ts->client->dev,
"%s: spi write retry %d\n",
__func__, retry + 1);
ts->comm_err_count++;
usleep_range(1 * 1000, 1 * 1000);
if (ts->power_status ==
SEC_TS_STATE_POWER_OFF) {
input_err(true, &ts->client->dev,
"%s: POWER_STATUS : OFF, retry:%d\n",
__func__, retry);
mutex_unlock(&ts->io_mutex);
goto err;
}
if (retry == SEC_TS_IO_RETRY_CNT - 1) {
input_err(true, &ts->client->dev,
"%s: write reg retry over retry limit, skip read\n",
__func__);
goto skip_spi_read;
}
continue;
}
usleep_range(sec_ts_spi_delay(reg),
sec_ts_spi_delay(reg) + 1);
copy_size = 0;
remain = spi_read_len;
do {
if (remain > ts->io_burstmax)
copy_cur = ts->io_burstmax;
else
copy_cur = remain;
spi_message_init(&msg);
transfer[0].len = copy_cur;
transfer[0].tx_buf = NULL;
transfer[0].rx_buf =
&ts->io_read_buf[copy_size];
// CS needs to stay low until read seq. is done
transfer[0].cs_change =
(remain > ts->io_burstmax) ? 1 : 0;
spi_message_add_tail(&transfer[0], &msg);
copy_size += copy_cur;
remain -= copy_cur;
ret = spi_sync(ts->client, &msg);
#ifdef SEC_TS_DEBUG_IO
input_info(true, &ts->client->dev,
"%s: ", __func__);
for (i = 0; i < 8; i++)
input_info(true,
&ts->client->dev, "%X ",
ts->io_read_buf[i]);
input_info(true, &ts->client->dev,
"\n%s: checksum = %X",
__func__, read_checksum);
#endif
if (ret != 0) {
ret = -EIO;
input_err(true, &ts->client->dev,
"%s: retry %d\n",
__func__, retry + 1);
ts->comm_err_count++;
usleep_range(1 * 1000, 1 * 1000);
if (ts->power_status
== SEC_TS_STATE_POWER_OFF) {
input_err(true,
&ts->client->dev,
"%s: POWER_STATUS : OFF, retry:%d\n",
__func__, retry);
mutex_unlock(&ts->io_mutex);
goto err;
}
break;
}
} while (remain > 0);
if (ret != 0) { // read fail, retry
ret = -EIO;
continue;
}
for (i = 0, read_checksum = 0x0;
i < SEC_TS_SPI_READ_HEADER_SIZE + len; i++)
read_checksum += ts->io_read_buf[i];
//read success
if (ts->io_read_buf[0] == SEC_TS_SPI_SYNC_CODE &&
// ts->io_read_buf[6] == SEC_TS_SPI_CMD_OK &&
reg == ts->io_read_buf[5] &&
read_checksum ==
ts->io_read_buf[SEC_TS_SPI_READ_HEADER_SIZE +
len])
break;
//read data fail
else if (ts->io_read_buf[6]
== SEC_TS_SPI_CMD_UNKNOWN ||
ts->io_read_buf[6]
== SEC_TS_SPI_CMD_BAD_PARAM) {
input_info(true, &ts->client->dev,
"%s: CMD_NG cmd(M) = %X, cmd(S) = %X, cmd_result = %X\n",
__func__, reg, ts->io_read_buf[5],
ts->io_read_buf[6]);
ret = -EIO;
continue;
} else {
input_info(true, &ts->client->dev,
"%s: spi fail, ret %d, sync code %X, reg(M) %X, reg(S) %X, cmd_result %X, chksum(M) %X, chksum(S) %X\n",
__func__, ret, ts->io_read_buf[0],
reg, ts->io_read_buf[5],
ts->io_read_buf[6], read_checksum,
ts->io_read_buf[
SEC_TS_SPI_READ_HEADER_SIZE +
len]);
ret = -EIO;
continue;
}
}
if (ret == 0)
memcpy(data, ts->io_read_buf +
SEC_TS_SPI_READ_HEADER_SIZE, len);
usleep_range(sec_ts_spi_post_delay(reg),
sec_ts_spi_post_delay(reg) + 1);
#endif
}
skip_spi_read:
mutex_unlock(&ts->io_mutex);
if (retry == SEC_TS_IO_RETRY_CNT) {
input_err(true, &ts->client->dev,
"%s: read reg(%#x) over retry limit, comm_err_count %d, io_err_count %d\n",
__func__, reg, ts->comm_err_count, ts->io_err_count);
ret = -EIO;
ts->io_err_count++;
#ifdef USE_POR_AFTER_I2C_RETRY
if (ts->probe_done && !ts->reset_is_on_going)
schedule_delayed_work(&ts->reset_work,
msecs_to_jiffies(TOUCH_RESET_DWORK_TIME));
#endif
} else
ts->io_err_count = 0;
/* do hw reset if continuously failed over SEC_TS_IO_RESET_CNT times */
if (ts->io_err_count >= SEC_TS_IO_RESET_CNT) {
ts->io_err_count = 0;
sec_ts_hw_reset(ts);
}
return ret;
err:
return -EIO;
}
static int sec_ts_write_burst_internal(struct sec_ts_data *ts,
u8 *data, int len, bool dma_safe)
{
int ret;
int retry;
#ifndef I2C_INTERFACE
struct spi_message msg;
struct spi_transfer transfer[1] = { { 0 } };
unsigned int i;
unsigned int spi_len = 0;
unsigned char checksum = 0x0;
#endif
#ifdef I2C_INTERFACE
if (len > sizeof(ts->io_write_buf) && dma_safe == false) {
input_err(true, &ts->client->dev,
"%s: len %d over pre-allocated size %d\n",
__func__, len, sizeof(ts->io_write_buf));
return -ENOSPC;
}
#else
/* add 3 zero stuffing tx bytes at last */
if (SEC_TS_SPI_HEADER_SIZE + len + SEC_TS_SPI_CHECKSUM_SIZE + 3 >
sizeof(ts->io_write_buf)) {
input_err(true, &ts->client->dev,
"%s: len is larger than buffer size\n", __func__);
return -EINVAL;
}
#endif
mutex_lock(&ts->io_mutex);
#ifdef I2C_INTERFACE
if (dma_safe == false) {
memcpy(ts->io_write_buf, data, len);
data = ts->io_write_buf;
}
#else
ts->io_write_buf[0] = SEC_TS_SPI_SYNC_CODE;
ts->io_write_buf[1] = (len >> 8) & 0xFF;
ts->io_write_buf[2] = len & 0xFF;
ts->io_write_buf[3] = 0x0;
ts->io_write_buf[4] = 0x0;
memcpy(ts->io_write_buf + SEC_TS_SPI_HEADER_SIZE, data, len);
spi_len = SEC_TS_SPI_HEADER_SIZE + len;
for (i = 0; i < spi_len; i++)
checksum += ts->io_write_buf[i];
ts->io_write_buf[spi_len] = checksum;
spi_len += SEC_TS_SPI_CHECKSUM_SIZE;
spi_message_init(&msg);
/* add 3 zero stuffing tx bytes at last */
memset(ts->io_write_buf + spi_len, 0x00, 3);
spi_len = (spi_len + 3) & ~3;
transfer[0].len = spi_len;
transfer[0].tx_buf = ts->io_write_buf;
transfer[0].rx_buf = NULL;
spi_message_add_tail(&transfer[0], &msg);
#ifdef SEC_TS_DEBUG_IO
input_info(true, &ts->client->dev, "%s:\n", __func__);
for (i = 0; i < spi_len; i++)
input_info(true, &ts->client->dev, "%X ", ts->io_write_buf[i]);
input_info(true, &ts->client->dev, "\n");
#endif
#endif
for (retry = 0; retry < SEC_TS_IO_RETRY_CNT; retry++) {
#ifdef I2C_INTERFACE
if ((ret = i2c_master_send(ts->client, data, len)) == len)
break;
#else
if ((ret = spi_sync(ts->client, &msg)) == 0)
break;
#endif
usleep_range(1 * 1000, 1 * 1000);
if (retry > 1) {
input_err(true, &ts->client->dev,
"%s: retry %d\n", __func__, retry + 1);
ts->comm_err_count++;
}
}
mutex_unlock(&ts->io_mutex);
if (retry == SEC_TS_IO_RETRY_CNT) {
input_err(true, &ts->client->dev,
"%s: write over retry limit\n", __func__);
ret = -EIO;
}
return ret;
}
static int sec_ts_read_bulk_internal(struct sec_ts_data *ts,
u8 *data, int len, bool dma_safe)
{
int ret;
unsigned char retry;
int remain = len;
#ifdef I2C_INTERFACE
struct i2c_msg msg;
#else
struct spi_message msg;
struct spi_transfer transfer[1] = { { 0 } };
unsigned int i;
unsigned int spi_len = 0;
unsigned char checksum = 0x0;
int copy_size = 0, copy_cur = 0;
int retry_msg = 0;
#endif
if (len > sizeof(ts->io_read_buf) && dma_safe == false) {
input_err(true, &ts->client->dev,
"%s: len %d over pre-allocated size %d\n", __func__,
len, sizeof(ts->io_read_buf));
return -ENOSPC;
}
mutex_lock(&ts->io_mutex);
#ifdef I2C_INTERFACE
msg.addr = ts->client->addr;
msg.flags = I2C_M_RD;
msg.len = len;
if (dma_safe == false)
msg.buf = ts->io_read_buf;
else
msg.buf = data;
do {
if (remain > ts->io_burstmax)
msg.len = ts->io_burstmax;
else
msg.len = remain;
remain -= ts->io_burstmax;
for (retry = 0; retry < SEC_TS_IO_RETRY_CNT; retry++) {
ret = i2c_transfer(ts->client->adapter, &msg, 1);
if (ret == 1)
break;
usleep_range(1 * 1000, 1 * 1000);
if (retry > 1) {
input_err(true, &ts->client->dev,
"%s: retry %d\n",
__func__, retry + 1);
ts->comm_err_count++;
}
}
if (retry == SEC_TS_IO_RETRY_CNT) {
input_err(true, &ts->client->dev,
"%s: read over retry limit\n", __func__);
ret = -EIO;
break;
}
msg.buf += msg.len;
} while (remain > 0);
if (ret == 1 && dma_safe == false)
memcpy(data, ts->io_read_buf, len);
#else
retry_message:
remain = spi_len = (SEC_TS_SPI_READ_HEADER_SIZE + len +
SEC_TS_SPI_CHECKSUM_SIZE + 3) & ~3;
do {
if (remain > ts->io_burstmax)
copy_cur = ts->io_burstmax;
else
copy_cur = remain;
spi_message_init(&msg);
transfer[0].len = copy_cur;
transfer[0].tx_buf = NULL;
transfer[0].rx_buf = &ts->io_read_buf[copy_size];
/* CS needs to stay low until read seq. is done
*/
transfer[0].cs_change = (remain > ts->io_burstmax) ? 1 : 0;
spi_message_add_tail(&transfer[0], &msg);
copy_size += copy_cur;
remain -= copy_cur;
for (retry = 0; retry < SEC_TS_IO_RETRY_CNT; retry++) {
ret = spi_sync(ts->client, &msg);
if (ret == 0)
break;
usleep_range(1 * 1000, 1 * 1000);
if (ts->power_status == SEC_TS_STATE_POWER_OFF) {
input_err(true, &ts->client->dev,
"%s: POWER_STATUS : OFF, retry:%d\n",
__func__, retry);
mutex_unlock(&ts->io_mutex);
goto err;
}
if (retry > 1) {
input_err(true, &ts->client->dev,
"%s: retry %d\n", __func__, retry + 1);
ts->comm_err_count++;
}
}
} while (remain > 0);
for (i = 0, checksum = 0; i < SEC_TS_SPI_READ_HEADER_SIZE + len; i++)
checksum += ts->io_read_buf[i];
if (ret == 0 && ts->io_read_buf[0] == SEC_TS_SPI_SYNC_CODE &&
checksum == ts->io_read_buf[SEC_TS_SPI_READ_HEADER_SIZE + len])
memcpy(data, ts->io_read_buf + SEC_TS_SPI_READ_HEADER_SIZE,
len);
else {
input_info(true, &ts->client->dev,
"%s: spi fail, ret %d, sync code %X, reg(S) %X, chksum(M) %X, chksum(S) %X\n",
__func__, ret, ts->io_read_buf[0], ts->io_read_buf[5],
checksum,
ts->io_read_buf[SEC_TS_SPI_READ_HEADER_SIZE + len]);
if (retry_msg++ < SEC_TS_IO_RETRY_CNT)
goto retry_message;
}
#endif
mutex_unlock(&ts->io_mutex);
#ifdef I2C_INTERFACE
if (ret == 1)
#else
if (ret == 0)
#endif
return 0;
err:
return -EIO;
}
/* Wrapper API for read and write */
int sec_ts_read(struct sec_ts_data *ts, u8 reg, u8 *data, int len)
{
return sec_ts_read_internal(ts, reg, data, len, false);
}
int sec_ts_read_heap(struct sec_ts_data *ts, u8 reg, u8 *data, int len)
{
return sec_ts_read_internal(ts, reg, data, len, true);
}
int sec_ts_write_burst(struct sec_ts_data *ts, u8 *data, int len)
{
return sec_ts_write_burst_internal(ts, data, len, false);
}
int sec_ts_write_burst_heap(struct sec_ts_data *ts, u8 *data, int len)
{
return sec_ts_write_burst_internal(ts, data, len, true);
}
int sec_ts_read_bulk(struct sec_ts_data *ts, u8 *data, int len)
{
return sec_ts_read_bulk_internal(ts, data, len, false);
}
int sec_ts_read_bulk_heap(struct sec_ts_data *ts, u8 *data, int len)
{
return sec_ts_read_bulk_internal(ts, data, len, true);
}
static int sec_ts_read_from_customlib(struct sec_ts_data *ts, u8 *data, int len)
{
int ret;
ret = sec_ts_write(ts, SEC_TS_CMD_CUSTOMLIB_READ_PARAM, data, 2);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: fail to read custom library command\n", __func__);
ret = sec_ts_read(ts, SEC_TS_CMD_CUSTOMLIB_READ_PARAM, (u8 *)data, len);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: fail to read custom library command\n", __func__);
return ret;
}
#if defined(CONFIG_TOUCHSCREEN_DUMP_MODE)
#include <linux/sec_debug.h>
extern struct tsp_dump_callbacks dump_callbacks;
static struct delayed_work *p_ghost_check;
static void sec_ts_check_rawdata(struct work_struct *work)
{
struct sec_ts_data *ts = container_of(work, struct sec_ts_data,
ghost_check.work);
if (ts->tsp_dump_lock == 1) {
input_err(true, &ts->client->dev,
"%s: ignored ## already checking..\n", __func__);
return;
}
if (ts->power_status == SEC_TS_STATE_POWER_OFF) {
input_err(true, &ts->client->dev,
"%s: ignored ## IC is power off\n", __func__);
return;
}
ts->tsp_dump_lock = 1;
input_info(true, &ts->client->dev, "%s: start ##\n", __func__);
sec_ts_run_rawdata_all((void *)ts, false);
msleep(100);
input_info(true, &ts->client->dev, "%s: done ##\n", __func__);
ts->tsp_dump_lock = 0;
}
static void dump_tsp_log(void)
{
pr_info("%s: %s %s: start\n", SEC_TS_NAME, SECLOG, __func__);
#ifdef CONFIG_BATTERY_SAMSUNG
if (lpcharge == 1) {
pr_err("%s: %s %s: ignored ## lpm charging Mode!!\n",
SEC_TS_NAME, SECLOG, __func__);
return;
}
#endif
if (p_ghost_check == NULL) {
pr_err("%s: %s %s: ignored ## tsp probe fail!!\n",
SEC_TS_NAME, SECLOG, __func__);
return;
}
schedule_delayed_work(p_ghost_check, msecs_to_jiffies(100));
}
#endif
void sec_ts_delay(unsigned int ms)
{
if (ms < 20)
usleep_range(ms * 1000, ms * 1000);
else
msleep(ms);
}
int sec_ts_wait_for_ready(struct sec_ts_data *ts, unsigned int ack)
{
return sec_ts_wait_for_ready_with_count(ts, ack,
SEC_TS_WAIT_RETRY_CNT);
}
int sec_ts_wait_for_ready_with_count(struct sec_ts_data *ts, unsigned int ack,
unsigned int count)
{
int rc = -1;
int retry = 0;
u8 tBuff[SEC_TS_EVENT_BUFF_SIZE] = {0,};
while (retry < count) {
if (sec_ts_read(ts, SEC_TS_READ_ONE_EVENT, tBuff,
SEC_TS_EVENT_BUFF_SIZE) >= 0) {
if (((tBuff[0] >> 2) & 0xF) == TYPE_STATUS_EVENT_INFO) {
if (tBuff[1] == ack) {
rc = 0;
break;
}
} else if (((tBuff[0] >> 2) & 0xF) ==
TYPE_STATUS_EVENT_VENDOR_INFO) {
if (tBuff[1] == ack) {
rc = 0;
break;
}
}
}
sec_ts_delay(20);
retry++;
}
if (retry == count)
input_err(true, &ts->client->dev, "%s: Time Over\n",
__func__);
input_info(true, &ts->client->dev,
"%s: %02X, %02X, %02X, %02X, %02X, %02X, %02X, %02X [%d]\n",
__func__, tBuff[0], tBuff[1], tBuff[2], tBuff[3],
tBuff[4], tBuff[5], tBuff[6], tBuff[7], retry);
return rc;
}
int sec_ts_read_calibration_report(struct sec_ts_data *ts)
{
int ret;
memset(ts->cali_report, 0, sizeof(ts->cali_report));
ret = sec_ts_read(ts, SEC_TS_READ_CALIBRATION_REPORT,
ts->cali_report, sizeof(ts->cali_report));
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: failed to read, %d\n", __func__, ret);
return ret;
}
input_info(true, &ts->client->dev,
"%s: count:%d, pass count:%d, fail count:%d, status:%X, param version:%X %X %X %X\n",
__func__, ts->cali_report_try_cnt, ts->cali_report_pass_cnt,
ts->cali_report_fail_cnt, ts->cali_report_status,
ts->cali_report_param_ver[0], ts->cali_report_param_ver[1],
ts->cali_report_param_ver[2], ts->cali_report_param_ver[3]);
return ts->cali_report_status;
}
static void sec_ts_reinit(struct sec_ts_data *ts)
{
u8 w_data[2] = {0x00, 0x00};
int ret = 0;
input_info(true, &ts->client->dev,
"%s : charger=0x%x, Cover=0x%x, Power mode=0x%x\n",
__func__, ts->charger_mode, ts->touch_functions,
ts->lowpower_status);
/* charger mode */
if (ts->charger_mode != SEC_TS_BIT_CHARGER_MODE_NO) {
w_data[0] = ts->charger_mode;
ret = ts->sec_ts_write(ts, SET_TS_CMD_SET_CHARGER_MODE,
(u8 *)&w_data[0], 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: Failed to send command(0x%x)",
__func__, SET_TS_CMD_SET_CHARGER_MODE);
}
/* Cover mode */
if (ts->touch_functions & SEC_TS_BIT_SETFUNC_COVER) {
w_data[0] = ts->cover_cmd;
ret = sec_ts_write(ts, SEC_TS_CMD_SET_COVERTYPE,
(u8 *)&w_data[0], 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: Failed to send command(0x%x)",
__func__, SEC_TS_CMD_SET_COVERTYPE);
ret = sec_ts_write(ts, SEC_TS_CMD_SET_TOUCHFUNCTION,
(u8 *)&(ts->touch_functions), 2);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: Failed to send command(0x%x)",
__func__, SEC_TS_CMD_SET_TOUCHFUNCTION);
}
#ifdef SEC_TS_SUPPORT_CUSTOMLIB
if (ts->use_customlib)
sec_ts_set_custom_library(ts);
#endif
/* Power mode */
if (ts->lowpower_status == TO_LOWPOWER_MODE) {
w_data[0] = (ts->lowpower_mode &
SEC_TS_MODE_LOWPOWER_FLAG) >> 1;
ret = sec_ts_write(ts, SEC_TS_CMD_WAKEUP_GESTURE_MODE,
(u8 *)&w_data[0], 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: Failed to send command(0x%x)",
__func__, SEC_TS_CMD_WAKEUP_GESTURE_MODE);
w_data[0] = TO_LOWPOWER_MODE;
ret = sec_ts_write(ts, SEC_TS_CMD_SET_POWER_MODE,
(u8 *)&w_data[0], 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: Failed to send command(0x%x)",
__func__, SEC_TS_CMD_SET_POWER_MODE);
sec_ts_delay(50);
if (ts->lowpower_mode & SEC_TS_MODE_CUSTOMLIB_AOD) {
int i, ret;
u8 data[10] = {0x02, 0};
for (i = 0; i < 4; i++) {
data[i * 2 + 2] = ts->rect_data[i] & 0xFF;
data[i * 2 + 3] =
(ts->rect_data[i] >> 8) & 0xFF;
}
ret = ts->sec_ts_write(ts,
SEC_TS_CMD_CUSTOMLIB_WRITE_PARAM,
&data[0], 10);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: Failed to write offset\n",
__func__);
ret = ts->sec_ts_write(ts,
SEC_TS_CMD_CUSTOMLIB_NOTIFY_PACKET, NULL, 0);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: Failed to send notify\n",
__func__);
}
} else {
sec_ts_set_grip_type(ts, ONLY_EDGE_HANDLER);
if (ts->dex_mode) {
input_info(true, &ts->client->dev,
"%s: set dex mode\n", __func__);
ret = ts->sec_ts_write(ts, SEC_TS_CMD_SET_DEX_MODE,
&ts->dex_mode, 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: failed to set dex mode %x\n",
__func__, ts->dex_mode);
}
if (ts->brush_mode) {
input_info(true, &ts->client->dev,
"%s: set brush mode\n", __func__);
ret = ts->sec_ts_write(ts, SEC_TS_CMD_SET_BRUSH_MODE,
&ts->brush_mode, 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: failed to set brush mode\n",
__func__);
}
if (ts->touchable_area) {
input_info(true, &ts->client->dev,
"%s: set 16:9 mode\n", __func__);
ret = ts->sec_ts_write(ts,
SEC_TS_CMD_SET_TOUCHABLE_AREA,
&ts->touchable_area, 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: failed to set 16:9 mode\n",
__func__);
}
}
}
#if IS_ENABLED(CONFIG_TOUCHSCREEN_HEATMAP)
/* Update a state machine used to toggle control of the touch IC's motion
* filter.
*/
static void update_motion_filter(struct sec_ts_data *ts)
{
/* Motion filter timeout, in milliseconds */
const u32 mf_timeout_ms = 500;
u8 next_state;
/* Count the active touches */
u8 touches = hweight32(ts->tid_touch_state);
if (ts->use_default_mf)
return;
/* Determine the next filter state. The motion filter is enabled by
* default and it is disabled while a single finger is touching the
* screen. If another finger is touched down or if a timeout expires,
* the motion filter is reenabled and remains enabled until all fingers
* are lifted.
*/
next_state = ts->mf_state;
switch (ts->mf_state) {
case SEC_TS_MF_FILTERED:
if (touches == 1) {
next_state = SEC_TS_MF_UNFILTERED;
ts->mf_downtime = ktime_get();
}
break;
case SEC_TS_MF_UNFILTERED:
if (touches == 0) {
next_state = SEC_TS_MF_FILTERED;
} else if (touches > 1 ||
ktime_after(ktime_get(),
ktime_add_ms(ts->mf_downtime,
mf_timeout_ms))) {
next_state = SEC_TS_MF_FILTERED_LOCKED;
}
break;
case SEC_TS_MF_FILTERED_LOCKED:
if (touches == 0)
next_state = SEC_TS_MF_FILTERED;
break;
}
/* Send command to update filter state */
if ((next_state == SEC_TS_MF_UNFILTERED) !=
(ts->mf_state == SEC_TS_MF_UNFILTERED)) {
int ret;
u8 para;
pr_debug("%s: setting motion filter = %s.\n", __func__,
(next_state == SEC_TS_MF_UNFILTERED) ?
"false" : "true");
para = (next_state == SEC_TS_MF_UNFILTERED) ? 0x01 : 0x00;
ret = ts->sec_ts_write(ts, SEC_TS_CMD_SET_CONT_REPORT,
&para, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: write reg %#x para %#x failed, returned %i\n",
__func__, SEC_TS_CMD_SET_CONT_REPORT, para, ret);
}
}
ts->mf_state = next_state;
}
static bool read_heatmap_raw(struct v4l2_heatmap *v4l2)
{
struct sec_ts_data *ts = container_of(v4l2, struct sec_ts_data, v4l2);
const struct sec_ts_plat_data *pdata = ts->plat_data;
int result;
int max_x = v4l2->format.width;
int max_y = v4l2->format.height;
if (ts->tsp_dump_lock == 1) {
input_info(true, &ts->client->dev,
"%s: drop this because raw data reading by others\n",
__func__);
return false;
}
if (pdata->heatmap_mode == HEATMAP_PARTIAL) {
strength_t heatmap_value;
int heatmap_x, heatmap_y;
/* index for through the heatmap buffer read over the bus */
unsigned int local_i;
/* final position of the heatmap value in the full frame */
unsigned int frame_i;
unsigned int num_elements;
u8 enable;
struct heatmap_report report = {0};
result = sec_ts_read(ts,
SEC_TS_CMD_HEATMAP_ENABLE, &enable, 1);
if (result < 0) {
input_err(true, &ts->client->dev,
"%s: read reg %#x failed, returned %i\n",
__func__, SEC_TS_CMD_HEATMAP_ENABLE, result);
return false;
}
if (!enable) {
enable = 1;
result = sec_ts_write(ts,
SEC_TS_CMD_HEATMAP_ENABLE, &enable, 1);
if (result < 0)
input_err(true, &ts->client->dev,
"%s: enable local heatmap failed, returned %i\n",
__func__, result);
/*
* After local heatmap enabled, it takes `1/SCAN_RATE`
* time to make data ready. But, we don't want to wait
* here to cause overhead. Just drop this and wait for
* next reading.
*/
return false;
}
result = sec_ts_read(ts, SEC_TS_CMD_HEATMAP_READ,
(uint8_t *) &report, sizeof(report));
if (result < 0) {
input_err(true, &ts->client->dev,
"%s: read failed, returned %i\n",
__func__, result);
return false;
}
num_elements = report.size_x * report.size_y;
if (num_elements > LOCAL_HEATMAP_WIDTH * LOCAL_HEATMAP_HEIGHT) {
input_err(true, &ts->client->dev,
"Unexpected heatmap size: %i x %i",
report.size_x, report.size_y);
return false;
}
/*
* Set all to zero, will only write to non-zero locations
* in the loop.
*/
memset(v4l2->frame, 0, v4l2->format.sizeimage);
/* populate the data buffer, rearranging into final locations */
for (local_i = 0; local_i < num_elements; local_i++) {
/* big-endian order raw data into heatmap data type */
be16_to_cpus(&report.data[local_i]);
heatmap_value = report.data[local_i];
if (heatmap_value == 0) {
/*
* Already initialized to zero. More
* importantly, samples around edges may go out
* of bounds.
* If their value is zero, this is ok.
*/
continue;
}
heatmap_x = report.offset_x + (local_i % report.size_x);
heatmap_y = report.offset_y + (local_i / report.size_x);
if (heatmap_x < 0 || heatmap_x >= max_x ||
heatmap_y < 0 || heatmap_y >= max_y) {
input_err(true, &ts->client->dev,
"Invalid x or y: (%i, %i), value=%i, ending loop\n",
heatmap_x, heatmap_y,
heatmap_value);
return false;
}
frame_i = heatmap_y * max_x + heatmap_x;
v4l2->frame[frame_i] = heatmap_value;
}
} else if (pdata->heatmap_mode == HEATMAP_FULL) {
int i, j, index = 0;
int ret = 0;
u8 type;
if (!ts->heatmap_buff) {
ts->heatmap_buff = kmalloc(
sizeof(strength_t) * max_x * max_y, GFP_KERNEL);
if (!ts->heatmap_buff) {
input_err(true, &ts->client->dev,
"%s: alloc heatmap_buff failed\n", __func__);
return false;
}
}
ret = sec_ts_read(ts,
SEC_TS_CMD_MUTU_RAW_TYPE, &ts->ms_frame_type, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: read rawdata type failed\n",
__func__);
return false;
}
/* Check raw type is TYPE_SIGNAL_DATA */
if (ts->ms_frame_type != TYPE_SIGNAL_DATA) {
input_info(true, &ts->client->dev,
"%s: ms_frame_type change from %#x\n",
__func__, ts->ms_frame_type);
/* Check raw type is TYPE_INVALID_DATA */
if (ts->ms_frame_type != TYPE_INVALID_DATA) {
type = TYPE_INVALID_DATA;
ret = sec_ts_write(ts,
SEC_TS_CMD_MUTU_RAW_TYPE, &type, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: recover rawdata type failed\n",
__func__);
return false;
}
ts->ms_frame_type = type;
}
/* Set raw type to TYPE_SIGNAL_DATA */
type = TYPE_SIGNAL_DATA;
ret = sec_ts_write(ts, SEC_TS_CMD_MUTU_RAW_TYPE,
&type, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: Set rawdata type failed\n",
__func__);
return false;
}
ts->ms_frame_type = type;
/*
* If raw type change, need to wait 50 ms to read data
* back. But, we don't wanto to wait here to cause
* overhead. Just drop this and wait for next reading.
*/
return false;
}
ret = sec_ts_read_heap(ts, SEC_TS_READ_TOUCH_RAWDATA,
(u8 *)ts->heatmap_buff,
sizeof(strength_t) * max_x * max_y);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: Read delta frame failed\n", __func__);
return false;
}
/* big-endian order raw data into heatmap data type */
for (i = max_y - 1; i >= 0; i--)
for (j = max_x - 1; j >= 0 ; j--)
v4l2->frame[index++] = be16_to_cpup(
ts->heatmap_buff + (j * max_y) + i);
} else
return false;
return true;
}
#endif
#ifdef SEC_TS_SUPPORT_CUSTOMLIB
/* WARNING: touch_offload does not currently support the custom library
* interface!
* TODO: when custom library support is enabled, ensure that the output is
* routed through touch_offload.
*/
static void sec_ts_handle_lib_status_event(struct sec_ts_data *ts,
struct sec_ts_event_status *p_event_status)
{
if ((p_event_status->stype == TYPE_STATUS_EVENT_CUSTOMLIB_INFO) &&
(p_event_status->status_id == SEC_TS_EVENT_CUSTOMLIB_FORCE_KEY)) {
if (ts->power_status == SEC_TS_STATE_POWER_ON) {
if (p_event_status->status_data_1 &
SEC_TS_CUSTOMLIB_EVENT_PRESSURE_TOUCHED) {
ts->all_force_count++;
ts->scrub_id =
CUSTOMLIB_EVENT_TYPE_PRESSURE_TOUCHED;
} else {
if (ts->scrub_id ==
CUSTOMLIB_EVENT_TYPE_AOD_HOMEKEY_PRESS) {
input_report_key(ts->input_dev,
KEY_HOMEPAGE,
0);
ts->scrub_id =
CUSTOMLIB_EVENT_TYPE_AOD_HOMEKEY_RELEASE;
} else {
ts->scrub_id =
CUSTOMLIB_EVENT_TYPE_PRESSURE_RELEASED;
}
}
input_report_key(ts->input_dev,
KEY_BLACK_UI_GESTURE, 1);
} else {
if (p_event_status->status_data_1 &
SEC_TS_CUSTOMLIB_EVENT_PRESSURE_RELEASED) {
input_report_key(ts->input_dev,
KEY_HOMEPAGE, 0);
input_report_key(ts->input_dev,
KEY_BLACK_UI_GESTURE, 1);
ts->scrub_id =
CUSTOMLIB_EVENT_TYPE_AOD_HOMEKEY_RLS_NO_HAPTIC;
input_sync(ts->input_dev);
haptic_homekey_release();
} else {
input_report_key(ts->input_dev,
KEY_HOMEPAGE, 1);
input_sync(ts->input_dev);
ts->scrub_id =
CUSTOMLIB_EVENT_TYPE_AOD_HOMEKEY_PRESS;
haptic_homekey_press();
ts->all_force_count++;
}
}
ts->scrub_x =
((p_event_status->status_data_4 >> 4) & 0xF) << 8 |
(p_event_status->status_data_3 & 0xFF);
ts->scrub_y =
((p_event_status->status_data_4 >> 0) & 0xF) << 8 |
(p_event_status->status_data_2 & 0xFF);
input_info(true, &ts->client->dev, "%s: PRESSURE[%d]\n",
__func__, ts->scrub_id);
input_sync(ts->input_dev);
input_report_key(ts->input_dev, KEY_BLACK_UI_GESTURE, 0);
}
}
#endif
static void sec_ts_handle_coord_event(struct sec_ts_data *ts,
struct sec_ts_event_coordinate *p_event_coord)
{
u8 t_id;
if (ts->input_closed) {
input_err(true, &ts->client->dev, "%s: device is closed\n",
__func__);
return;
}
t_id = (p_event_coord->tid - 1);
if (t_id < MAX_SUPPORT_TOUCH_COUNT + MAX_SUPPORT_HOVER_COUNT) {
ts->coord[t_id].id = t_id;
ts->coord[t_id].action = p_event_coord->tchsta;
ts->coord[t_id].x = (p_event_coord->x_11_4 << 4) |
(p_event_coord->x_3_0);
ts->coord[t_id].y = (p_event_coord->y_11_4 << 4) |
(p_event_coord->y_3_0);
ts->coord[t_id].z = p_event_coord->z &
SEC_TS_PRESSURE_MAX;
ts->coord[t_id].ttype = p_event_coord->ttype_3_2 << 2 |
p_event_coord->ttype_1_0 << 0;
ts->coord[t_id].major = p_event_coord->major;
ts->coord[t_id].minor = p_event_coord->minor;
if (!ts->coord[t_id].palm &&
(ts->coord[t_id].ttype == SEC_TS_TOUCHTYPE_PALM))
ts->coord[t_id].palm_count++;
ts->coord[t_id].palm =
(ts->coord[t_id].ttype == SEC_TS_TOUCHTYPE_PALM);
ts->coord[t_id].grip =
(ts->coord[t_id].ttype == SEC_TS_TOUCHTYPE_GRIP);
ts->coord[t_id].left_event = p_event_coord->left_event;
if (ts->coord[t_id].z <= 0)
ts->coord[t_id].z = 1;
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
ts->offload.coords[t_id].x = ts->coord[t_id].x;
ts->offload.coords[t_id].y = ts->coord[t_id].y;
ts->offload.coords[t_id].major = ts->coord[t_id].major;
ts->offload.coords[t_id].minor = ts->coord[t_id].minor;
ts->offload.coords[t_id].pressure = ts->coord[t_id].z;
#endif
if ((ts->coord[t_id].ttype ==
SEC_TS_TOUCHTYPE_NORMAL) ||
(ts->coord[t_id].ttype ==
SEC_TS_TOUCHTYPE_PALM) ||
(ts->coord[t_id].ttype ==
SEC_TS_TOUCHTYPE_GRIP) ||
(ts->coord[t_id].ttype ==
SEC_TS_TOUCHTYPE_WET) ||
(ts->coord[t_id].ttype ==
SEC_TS_TOUCHTYPE_GLOVE)) {
if (ts->coord[t_id].action ==
SEC_TS_COORDINATE_ACTION_RELEASE) {
do_gettimeofday(&ts->time_released[t_id]);
if (ts->time_longest <
(ts->time_released[t_id].tv_sec -
ts->time_pressed[t_id].tv_sec))
ts->time_longest =
(ts->time_released[t_id].tv_sec
- ts->time_pressed[t_id].tv_sec);
if (ts->touch_count > 0)
ts->touch_count--;
if (ts->touch_count == 0 ||
ts->tid_touch_state == 0) {
ts->check_multi = 0;
}
__clear_bit(t_id, &ts->tid_palm_state);
__clear_bit(t_id, &ts->tid_grip_state);
__clear_bit(t_id, &ts->tid_touch_state);
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
ts->offload.coords[t_id].status =
COORD_STATUS_INACTIVE;
if (!ts->offload.offload_running) {
#endif
input_mt_slot(ts->input_dev, t_id);
if (ts->plat_data->support_mt_pressure)
input_report_abs(ts->input_dev,
ABS_MT_PRESSURE, 0);
input_mt_report_slot_state(ts->input_dev,
MT_TOOL_FINGER, 0);
if (ts->touch_count == 0 ||
ts->tid_touch_state == 0) {
input_report_key(ts->input_dev,
BTN_TOUCH, 0);
input_report_key(ts->input_dev,
BTN_TOOL_FINGER, 0);
}
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
}
#endif
} else if (ts->coord[t_id].action ==
SEC_TS_COORDINATE_ACTION_PRESS) {
do_gettimeofday(&ts->time_pressed[t_id]);
ts->touch_count++;
if ((ts->touch_count > 4) &&
(ts->check_multi == 0)) {
ts->check_multi = 1;
ts->multi_count++;
}
ts->all_finger_count++;
ts->max_z_value = max_t(unsigned int,
ts->coord[t_id].z,
ts->max_z_value);
ts->min_z_value = min_t(unsigned int,
ts->coord[t_id].z,
ts->min_z_value);
ts->sum_z_value +=
(unsigned int)ts->coord[t_id].z;
__set_bit(t_id, &ts->tid_touch_state);
__clear_bit(t_id, &ts->tid_palm_state);
__clear_bit(t_id, &ts->tid_grip_state);
if (ts->coord[t_id].palm)
__set_bit(t_id, &ts->tid_palm_state);
else if (ts->coord[t_id].grip)
__set_bit(t_id, &ts->tid_grip_state);
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
ts->offload.coords[t_id].status =
COORD_STATUS_FINGER;
if (!ts->offload.offload_running) {
#endif
input_mt_slot(ts->input_dev, t_id);
if (ts->coord[t_id].palm)
input_mt_report_slot_state(
ts->input_dev, MT_TOOL_PALM, 1);
else if (ts->coord[t_id].grip)
input_mt_report_slot_state(
ts->input_dev, MT_TOOL_PALM, 1);
else
input_mt_report_slot_state(
ts->input_dev,
MT_TOOL_FINGER, 1);
input_report_key(ts->input_dev, BTN_TOUCH, 1);
input_report_key(ts->input_dev,
BTN_TOOL_FINGER, 1);
input_report_abs(ts->input_dev,
ABS_MT_POSITION_X, ts->coord[t_id].x);
input_report_abs(ts->input_dev,
ABS_MT_POSITION_Y, ts->coord[t_id].y);
input_report_abs(ts->input_dev,
ABS_MT_TOUCH_MAJOR,
ts->coord[t_id].major);
input_report_abs(ts->input_dev,
ABS_MT_TOUCH_MINOR,
ts->coord[t_id].minor);
#ifdef ABS_MT_CUSTOM
if (ts->brush_mode)
input_report_abs(ts->input_dev,
ABS_MT_CUSTOM,
(ts->coord[t_id].z << 1) |
ts->coord[t_id].palm);
else
input_report_abs(ts->input_dev,
ABS_MT_CUSTOM,
(BRUSH_Z_DATA << 1) |
ts->coord[t_id].palm);
#endif
if (ts->plat_data->support_mt_pressure)
input_report_abs(ts->input_dev,
ABS_MT_PRESSURE,
ts->coord[t_id].z);
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
}
#endif
} else if (ts->coord[t_id].action ==
SEC_TS_COORDINATE_ACTION_MOVE) {
ts->coord[t_id].mcount++;
#ifdef SW_GLOVE
if ((ts->coord[t_id].ttype ==
SEC_TS_TOUCHTYPE_GLOVE) &&
!ts->touchkey_glove_mode_status) {
ts->touchkey_glove_mode_status = true;
} else if ((ts->coord[t_id].ttype !=
SEC_TS_TOUCHTYPE_GLOVE) &&
ts->touchkey_glove_mode_status) {
ts->touchkey_glove_mode_status = false;
}
#endif
__set_bit(t_id, &ts->tid_touch_state);
__clear_bit(t_id, &ts->tid_palm_state);
__clear_bit(t_id, &ts->tid_grip_state);
if (ts->coord[t_id].palm)
__set_bit(t_id, &ts->tid_palm_state);
else if (ts->coord[t_id].grip)
__set_bit(t_id, &ts->tid_grip_state);
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
ts->offload.coords[t_id].status =
COORD_STATUS_FINGER;
if (!ts->offload.offload_running) {
#endif
#ifdef SW_GLOVE
if ((ts->coord[t_id].ttype ==
SEC_TS_TOUCHTYPE_GLOVE) &&
!ts->touchkey_glove_mode_status) {
input_report_switch(ts->input_dev,
SW_GLOVE, 1);
} else if ((ts->coord[t_id].ttype !=
SEC_TS_TOUCHTYPE_GLOVE) &&
ts->touchkey_glove_mode_status) {
input_report_switch(ts->input_dev,
SW_GLOVE, 0);
}
#endif
input_mt_slot(ts->input_dev, t_id);
if (ts->coord[t_id].palm)
input_mt_report_slot_state(
ts->input_dev, MT_TOOL_PALM, 1);
else if (ts->coord[t_id].grip)
input_mt_report_slot_state(
ts->input_dev, MT_TOOL_PALM, 1);
else
input_mt_report_slot_state(
ts->input_dev,
MT_TOOL_FINGER, 1);
input_report_key(ts->input_dev, BTN_TOUCH, 1);
input_report_key(ts->input_dev,
BTN_TOOL_FINGER, 1);
input_report_abs(ts->input_dev,
ABS_MT_POSITION_X, ts->coord[t_id].x);
input_report_abs(ts->input_dev,
ABS_MT_POSITION_Y, ts->coord[t_id].y);
input_report_abs(ts->input_dev,
ABS_MT_TOUCH_MAJOR,
ts->coord[t_id].major);
input_report_abs(ts->input_dev,
ABS_MT_TOUCH_MINOR,
ts->coord[t_id].minor);
#ifdef ABS_MT_CUSTOM
if (ts->brush_mode)
input_report_abs(ts->input_dev,
ABS_MT_CUSTOM,
(ts->coord[t_id].z << 1) |
ts->coord[t_id].palm);
else
input_report_abs(ts->input_dev,
ABS_MT_CUSTOM,
(BRUSH_Z_DATA << 1) |
ts->coord[t_id].palm);
#endif
if (ts->plat_data->support_mt_pressure)
input_report_abs(ts->input_dev,
ABS_MT_PRESSURE,
ts->coord[t_id].z);
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
}
#endif
} else
input_dbg(true, &ts->client->dev,
"%s: do not support coordinate action(%d)\n",
__func__, ts->coord[t_id].action);
} else
input_dbg(true, &ts->client->dev,
"%s: do not support coordinate type(%d)\n",
__func__, ts->coord[t_id].ttype);
} else
input_err(true, &ts->client->dev,
"%s: tid(%d) is out of range\n",
__func__, t_id);
if (t_id < MAX_SUPPORT_TOUCH_COUNT + MAX_SUPPORT_HOVER_COUNT) {
if (ts->coord[t_id].action == SEC_TS_COORDINATE_ACTION_PRESS) {
input_dbg(false, &ts->client->dev,
"%s[P] tID:%d x:%d y:%d z:%d major:%d minor:%d tc:%d type:%X\n",
ts->dex_name,
t_id, ts->coord[t_id].x,
ts->coord[t_id].y, ts->coord[t_id].z,
ts->coord[t_id].major,
ts->coord[t_id].minor,
ts->touch_count,
ts->coord[t_id].ttype);
} else if (ts->coord[t_id].action ==
SEC_TS_COORDINATE_ACTION_RELEASE) {
input_dbg(false, &ts->client->dev,
"%s[R] tID:%d mc:%d tc:%d lx:%d ly:%d v:%02X%02X cal:%02X(%02X) id(%d,%d) p:%d\n",
ts->dex_name,
t_id, ts->coord[t_id].mcount,
ts->touch_count,
ts->coord[t_id].x, ts->coord[t_id].y,
ts->plat_data->img_version_of_ic[2],
ts->plat_data->img_version_of_ic[3],
ts->cal_status, ts->nv, ts->tspid_val,
ts->tspicid_val,
ts->coord[t_id].palm_count);
ts->coord[t_id].mcount = 0;
ts->coord[t_id].palm_count = 0;
}
}
}
#ifdef SEC_TS_SUPPORT_CUSTOMLIB
static void sec_ts_handle_gesture_event(struct sec_ts_data *ts,
struct sec_ts_gesture_status *p_gesture_status)
{
if ((p_gesture_status->eid == 0x02) &&
(p_gesture_status->stype == 0x00)) {
u8 customlib[3] = { 0 };
ret = sec_ts_read_from_customlib(ts, customlib, 3);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: fail to read custom library data\n",
__func__);
input_info(true, &ts->client->dev,
"%s: Custom Library, %x, %x, %x\n",
__func__, customlib[0], customlib[1], customlib[2]);
if (p_gesture_status->gesture_id == SEC_TS_GESTURE_CODE_SPAY ||
p_gesture_status->gesture_id ==
SEC_TS_GESTURE_CODE_DOUBLE_TAP) {
/* will be fixed to data structure */
if (customlib[1] & SEC_TS_MODE_CUSTOMLIB_AOD) {
u8 data[5] = { 0x0A, 0x00, 0x00, 0x00, 0x00 };
ret = sec_ts_read_from_customlib(ts, data, 5);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: fail to read custom library data\n",
__func__);
if (data[4] & SEC_TS_AOD_GESTURE_DOUBLETAB)
ts->scrub_id =
CUSTOMLIB_EVENT_TYPE_AOD_DOUBLETAB;
ts->scrub_x = (data[1] & 0xFF) << 8 |
(data[0] & 0xFF);
ts->scrub_y = (data[3] & 0xFF) << 8 |
(data[2] & 0xFF);
input_info(true, &ts->client->dev,
"%s: aod: %d\n",
__func__, ts->scrub_id);
ts->all_aod_tap_count++;
}
if (customlib[1] & SEC_TS_MODE_CUSTOMLIB_SPAY) {
ts->scrub_id = CUSTOMLIB_EVENT_TYPE_SPAY;
input_info(true, &ts->client->dev,
"%s: SPAY: %d\n",
__func__, ts->scrub_id);
ts->all_spay_count++;
}
input_report_key(ts->input_dev,
KEY_BLACK_UI_GESTURE, 1);
input_sync(ts->input_dev);
input_report_key(ts->input_dev,
KEY_BLACK_UI_GESTURE, 0);
}
}
}
#endif
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
static void sec_ts_populate_coordinate_channel(struct sec_ts_data *ts,
struct touch_offload_frame *frame,
int channel)
{
int j;
struct TouchOffloadDataCoord *dc =
(struct TouchOffloadDataCoord *)frame->channel_data[channel];
memset(dc, 0, frame->channel_data_size[channel]);
dc->header.channel_type = TOUCH_DATA_TYPE_COORD;
dc->header.channel_size = TOUCH_OFFLOAD_FRAME_SIZE_COORD;
for (j = 0; j < MAX_COORDS; j++) {
dc->coords[j].x = ts->offload.coords[j].x;
dc->coords[j].y = ts->offload.coords[j].y;
dc->coords[j].major = ts->offload.coords[j].major;
dc->coords[j].minor = ts->offload.coords[j].minor;
dc->coords[j].pressure = ts->offload.coords[j].pressure;
dc->coords[j].status = ts->offload.coords[j].status;
}
}
static void sec_ts_populate_mutual_channel(struct sec_ts_data *ts,
struct touch_offload_frame *frame,
int channel)
{
uint32_t frame_index = 0;
int32_t x, y;
uint16_t heatmap_value;
int ret = 0;
u8 target_data_type, type;
struct TouchOffloadData2d *mutual_strength =
(struct TouchOffloadData2d *)frame->channel_data[channel];
switch (frame->channel_type[channel] & ~TOUCH_SCAN_TYPE_MUTUAL) {
case TOUCH_DATA_TYPE_RAW:
target_data_type = TYPE_DECODED_DATA;
break;
case TOUCH_DATA_TYPE_FILTERED:
target_data_type = TYPE_REMV_AMB_DATA;
break;
case TOUCH_DATA_TYPE_STRENGTH:
target_data_type = TYPE_SIGNAL_DATA;
break;
case TOUCH_DATA_TYPE_BASELINE:
target_data_type = TYPE_AMBIENT_DATA;
break;
}
mutual_strength->tx_size = ts->tx_count;
mutual_strength->rx_size = ts->rx_count;
mutual_strength->header.channel_type = frame->channel_type[channel];
mutual_strength->header.channel_size =
TOUCH_OFFLOAD_FRAME_SIZE_2D(mutual_strength->rx_size,
mutual_strength->tx_size);
ret = sec_ts_read(ts,
SEC_TS_CMD_MUTU_RAW_TYPE, &ts->ms_frame_type, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: read rawdata type failed\n",
__func__);
return;
}
/* Check raw type is correct */
if (ts->ms_frame_type != target_data_type) {
input_info(true, &ts->client->dev,
"%s: ms_frame_type change from %#x\n",
__func__, ts->ms_frame_type);
/* Check raw type is TYPE_INVALID_DATA */
if (ts->ms_frame_type != TYPE_INVALID_DATA) {
type = TYPE_INVALID_DATA;
ret = sec_ts_write(ts,
SEC_TS_CMD_MUTU_RAW_TYPE, &type, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: recover rawdata type failed\n",
__func__);
return;
}
ts->ms_frame_type = type;
}
/* Set the targeted data type */
ret = sec_ts_write(ts, SEC_TS_CMD_MUTU_RAW_TYPE,
&target_data_type, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: Set rawdata type failed\n",
__func__);
return;
}
ts->ms_frame_type = target_data_type;
/*
* If raw type change, need to wait 50 ms to read data
* back. But, we don't wanto to wait here to cause
* overhead. Just drop this and wait for next reading.
*/
return;
}
ret = sec_ts_read_heap(ts, SEC_TS_READ_TOUCH_RAWDATA,
(u8 *)ts->heatmap_buff,
mutual_strength->header.channel_size);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: Read mutual frame failed\n", __func__);
return;
}
for (y = mutual_strength->rx_size - 1; y >= 0; y--) {
for (x = mutual_strength->tx_size - 1; x >= 0; x--) {
heatmap_value =
ts->heatmap_buff[x * mutual_strength->rx_size + y];
((uint16_t *)
mutual_strength->data)[frame_index++] =
be16_to_cpu(heatmap_value);
}
}
}
static void sec_ts_populate_self_channel(struct sec_ts_data *ts,
struct touch_offload_frame *frame,
int channel)
{
uint32_t frame_index = 0;
int32_t x, y;
uint16_t heatmap_value;
int ret = 0;
u8 target_data_type, type;
struct TouchOffloadData1d *self_strength =
(struct TouchOffloadData1d *)frame->channel_data[channel];
switch (frame->channel_type[channel] & ~TOUCH_SCAN_TYPE_SELF) {
case TOUCH_DATA_TYPE_RAW:
target_data_type = TYPE_DECODED_DATA;
break;
case TOUCH_DATA_TYPE_FILTERED:
target_data_type = TYPE_REMV_AMB_DATA;
break;
case TOUCH_DATA_TYPE_STRENGTH:
target_data_type = TYPE_SIGNAL_DATA;
break;
case TOUCH_DATA_TYPE_BASELINE:
target_data_type = TYPE_AMBIENT_DATA;
break;
}
self_strength->tx_size = ts->tx_count;
self_strength->rx_size = ts->rx_count;
self_strength->header.channel_type = frame->channel_type[channel];
self_strength->header.channel_size =
TOUCH_OFFLOAD_FRAME_SIZE_1D(self_strength->rx_size,
self_strength->tx_size);
ret = sec_ts_read(ts,
SEC_TS_CMD_SELF_RAW_TYPE, &ts->ss_frame_type, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: read rawdata type failed\n",
__func__);
return;
}
/* Check raw type is TYPE_SIGNAL_DATA */
if (ts->ss_frame_type != target_data_type) {
input_info(true, &ts->client->dev,
"%s: ss_frame_type change from %#x\n",
__func__, ts->ss_frame_type);
/* Check raw type is TYPE_INVALID_DATA */
if (ts->ss_frame_type != TYPE_INVALID_DATA) {
type = TYPE_INVALID_DATA;
ret = sec_ts_write(ts,
SEC_TS_CMD_SELF_RAW_TYPE, &type, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: recover rawdata type failed\n",
__func__);
return;
}
ts->ss_frame_type = type;
}
/* Set the targeted data type */
ret = sec_ts_write(ts, SEC_TS_CMD_SELF_RAW_TYPE,
&target_data_type, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: Set rawdata type failed\n",
__func__);
return;
}
ts->ss_frame_type = target_data_type;
/*
* If raw type change, need to wait 50 ms to read data
* back. But, we don't wanto to wait here to cause
* overhead. Just drop this and wait for next reading.
*/
return;
}
ret = sec_ts_read_heap(ts, SEC_TS_READ_TOUCH_SELF_RAWDATA,
(u8 *)ts->heatmap_buff,
self_strength->header.channel_size);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: Read self frame failed\n", __func__);
return;
}
for (x = self_strength->tx_size - 1; x >= 0; x--) {
heatmap_value = ts->heatmap_buff[x];
((uint16_t *)
self_strength->data)[frame_index++] =
be16_to_cpu(heatmap_value);
}
for (y = self_strength->rx_size - 1; y >= 0; y--) {
heatmap_value = ts->heatmap_buff[self_strength->tx_size + y];
((uint16_t *)
self_strength->data)[frame_index++] =
be16_to_cpu(heatmap_value);
}
}
static void sec_ts_populate_frame(struct sec_ts_data *ts,
struct touch_offload_frame *frame)
{
static u64 index;
int i;
frame->header.index = index++;
frame->header.timestamp = ts->timestamp;
if (!ts->heatmap_buff) {
ts->heatmap_buff = kmalloc(
ts->rx_count * ts->rx_count * 2, GFP_KERNEL);
}
/* Populate all channels */
for (i = 0; i < frame->num_channels; i++) {
if (frame->channel_type[i] == TOUCH_DATA_TYPE_COORD)
sec_ts_populate_coordinate_channel(ts, frame, i);
else if ((frame->channel_type[i] & TOUCH_SCAN_TYPE_MUTUAL) != 0)
sec_ts_populate_mutual_channel(ts, frame, i);
else if ((frame->channel_type[i] & TOUCH_SCAN_TYPE_SELF) != 0)
sec_ts_populate_self_channel(ts, frame, i);
}
}
int sec_ts_enable_grip(struct sec_ts_data *ts, bool enable)
{
u8 value = enable ? 1 : 0;
int ret;
int final_result = 0;
/* Set grip */
ret = ts->sec_ts_write(ts, SEC_TS_CMD_SET_GRIP_DETEC, &value, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: SEC_TS_CMD_SET_GRIP_DETEC failed with ret=%d\n",
__func__, ret);
final_result = ret;
}
/* Set deadzone */
value = enable ? 1 : 0;
ret = ts->sec_ts_write(ts, SEC_TS_CMD_EDGE_DEADZONE, &value, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: SEC_TS_CMD_EDGE_DEADZONE failed with ret=%d\n",
__func__, ret);
final_result = ret;
}
return final_result;
}
static void sec_ts_offload_set_running(struct sec_ts_data *ts, bool running)
{
if (ts->offload.offload_running != running) {
ts->offload.offload_running = running;
if (running) {
pr_info("%s: disabling FW grip.\n", __func__);
sec_ts_enable_grip(ts, false);
} else {
pr_info("%s: enabling FW grip.\n", __func__);
sec_ts_enable_grip(ts, true);
}
}
}
#endif /* CONFIG_TOUCHSCREEN_OFFLOAD */
#define MAX_EVENT_COUNT 32
static void sec_ts_read_event(struct sec_ts_data *ts)
{
int ret;
u8 event_id;
u8 left_event_count;
u8 read_event_buff[MAX_EVENT_COUNT][SEC_TS_EVENT_BUFF_SIZE] = { { 0 } };
u8 *event_buff;
struct sec_ts_gesture_status *p_gesture_status;
struct sec_ts_event_status *p_event_status;
int curr_pos;
int remain_event_count = 0;
bool processed_pointer_event = false;
unsigned long last_tid_palm_state = ts->tid_palm_state;
unsigned long last_tid_grip_state = ts->tid_grip_state;
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
struct touch_offload_frame *frame = NULL;
#endif
if (ts->power_status == SEC_TS_STATE_LPM) {
pm_wakeup_event(&ts->client->dev, 3 * MSEC_PER_SEC);
/* waiting for blsp block resuming, if not occurs error */
ret = wait_for_completion_interruptible_timeout(
&ts->resume_done,
msecs_to_jiffies(3 * MSEC_PER_SEC));
if (ret == 0) {
input_err(true, &ts->client->dev,
"%s: LPM: pm resume is not handled\n",
__func__);
return;
}
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: LPM: -ERESTARTSYS if interrupted, %d\n",
__func__, ret);
return;
}
input_info(true, &ts->client->dev,
"%s: run LPM interrupt handler, %d\n", __func__, ret);
/* run lpm interrupt handler */
}
ret = event_id = curr_pos = remain_event_count = 0;
/* repeat READ_ONE_EVENT until buffer is empty(No event) */
ret = sec_ts_read(ts, SEC_TS_READ_ONE_EVENT,
(u8 *)read_event_buff[0], SEC_TS_EVENT_BUFF_SIZE);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: read one event failed\n", __func__);
return;
}
if (ts->temp == 0x01)
input_info(true, &ts->client->dev,
"ONE: %02X %02X %02X %02X %02X %02X %02X %02X\n",
read_event_buff[0][0], read_event_buff[0][1],
read_event_buff[0][2], read_event_buff[0][3],
read_event_buff[0][4], read_event_buff[0][5],
read_event_buff[0][6], read_event_buff[0][7]);
if (read_event_buff[0][0] == 0) {
input_info(true, &ts->client->dev,
"%s: event buffer is empty\n", __func__);
return;
}
left_event_count = read_event_buff[0][7] & 0x3F;
remain_event_count = left_event_count;
if (left_event_count > MAX_EVENT_COUNT - 1 ||
left_event_count == 0xFF) {
input_err(true, &ts->client->dev,
"%s: event buffer overflow %d\n",
__func__, left_event_count);
/* write clear event stack command
* when read_event_count > MAX_EVENT_COUNT
**/
ret = sec_ts_write(ts, SEC_TS_CMD_CLEAR_EVENT_STACK, NULL, 0);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: write clear event failed\n", __func__);
return;
}
if (left_event_count > 0) {
ret = sec_ts_read(ts, SEC_TS_READ_ALL_EVENT,
(u8 *)read_event_buff[1],
sizeof(u8) * (SEC_TS_EVENT_BUFF_SIZE) *
(left_event_count));
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: read one event failed\n", __func__);
return;
}
}
do {
event_buff = read_event_buff[curr_pos];
event_id = event_buff[0] & 0x3;
if (ts->temp == 0x01)
input_info(true, &ts->client->dev,
"ALL: %02X %02X %02X %02X %02X %02X %02X %02X\n",
event_buff[0], event_buff[1], event_buff[2],
event_buff[3], event_buff[4], event_buff[5],
event_buff[6], event_buff[7]);
switch (event_id) {
case SEC_TS_STATUS_EVENT:
p_event_status =
(struct sec_ts_event_status *)event_buff;
/* tchsta == 0 && ttype == 0 && eid == 0 : buffer empty
**/
if (p_event_status->stype > 0) {
/* Demote 'vendor' messages */
if (p_event_status->stype ==
TYPE_STATUS_EVENT_VENDOR_INFO) {
u8 status_id =
p_event_status->status_id;
u8 status_data_1 =
p_event_status->status_data_1;
input_dbg(true, &ts->client->dev,
"%s: STATUS %x %x %x %x %x %x %x %x\n",
__func__, event_buff[0],
event_buff[1], event_buff[2],
event_buff[3], event_buff[4],
event_buff[5], event_buff[6],
event_buff[7]);
switch (status_id) {
case SEC_TS_EVENT_STATUS_ID_WLC:
input_info(true,
&ts->client->dev,
"STATUS: wlc mode change to %x\n",
status_data_1);
break;
case SEC_TS_EVENT_STATUS_ID_NOISE:
input_info(true,
&ts->client->dev,
"STATUS: noise mode change to %x\n",
status_data_1);
break;
case SEC_TS_EVENT_STATUS_ID_GRIP:
input_info(true,
&ts->client->dev,
"STATUS: detect grip %s!\n",
(status_data_1) ?
"enter" : "leave");
break;
case SEC_TS_EVENT_STATUS_ID_PALM:
input_info(true,
&ts->client->dev,
"STATUS: detect palm!\n");
break;
default:
break;
}
} else
input_info(true, &ts->client->dev,
"%s: STATUS %x %x %x %x %x %x %x %x\n",
__func__, event_buff[0],
event_buff[1], event_buff[2],
event_buff[3], event_buff[4],
event_buff[5], event_buff[6],
event_buff[7]);
}
if ((p_event_status->stype ==
TYPE_STATUS_EVENT_INFO) &&
(p_event_status->status_id ==
SEC_TS_ACK_BOOT_COMPLETE)) {
u8 status_data_1 =
p_event_status->status_data_1;
switch (status_data_1) {
case 0x20:
/* watchdog reset !? */
sec_ts_locked_release_all_finger(ts);
ret = sec_ts_write(ts,
SEC_TS_CMD_SENSE_ON, NULL, 0);
if (ret < 0)
input_err(true,
&ts->client->dev,
"%s: fail to write Sense_on\n",
__func__);
sec_ts_reinit(ts);
break;
case 0x40:
input_info(true, &ts->client->dev,
"%s: sw_reset done\n",
__func__);
sec_ts_locked_release_all_finger(ts);
complete_all(&ts->boot_completed);
break;
case 0x10:
input_info(true, &ts->client->dev,
"%s: hw_reset done\n",
__func__);
sec_ts_locked_release_all_finger(ts);
complete_all(&ts->boot_completed);
break;
default:
break;
}
}
/* event queue full-> all finger release */
if ((p_event_status->stype == TYPE_STATUS_EVENT_ERR) &&
(p_event_status->status_id ==
SEC_TS_ERR_EVENT_QUEUE_FULL)) {
input_err(true, &ts->client->dev,
"%s: IC Event Queue is full\n",
__func__);
sec_ts_locked_release_all_finger(ts);
}
if ((p_event_status->stype ==
TYPE_STATUS_EVENT_ERR) &&
(p_event_status->status_id ==
SEC_TS_ERR_EVENT_ESD)) {
input_err(true, &ts->client->dev,
"%s: ESD detected. run reset\n",
__func__);
#ifdef USE_RESET_DURING_POWER_ON
schedule_work(&ts->reset_work.work);
#endif
}
if ((p_event_status->stype ==
TYPE_STATUS_EVENT_INFO) &&
(p_event_status->status_id ==
SEC_TS_ACK_WET_MODE)) {
ts->wet_mode = p_event_status->status_data_1;
input_info(true, &ts->client->dev,
"%s: water wet mode %d\n",
__func__, ts->wet_mode);
if (ts->wet_mode)
ts->wet_count++;
}
#ifdef SEC_TS_SUPPORT_CUSTOMLIB
mutex_lock(&ts->eventlock);
sec_ts_handle_lib_status_event(ts, p_event_status);
mutex_unlock(&ts->eventlock);
#endif
break;
case SEC_TS_COORDINATE_EVENT:
processed_pointer_event = true;
mutex_lock(&ts->eventlock);
sec_ts_handle_coord_event(ts,
(struct sec_ts_event_coordinate *)event_buff);
mutex_unlock(&ts->eventlock);
break;
case SEC_TS_GESTURE_EVENT:
p_gesture_status =
(struct sec_ts_gesture_status *)event_buff;
#ifdef SEC_TS_SUPPORT_CUSTOMLIB
mutex_lock(&ts->eventlock);
sec_ts_handle_gesture_event(ts, p_gesture_status);
mutex_unlock(&ts->eventlock);
#endif
break;
default:
input_err(true, &ts->client->dev,
"%s: unknown event %x %x %x %x %x %x\n",
__func__,
event_buff[0], event_buff[1], event_buff[2],
event_buff[3], event_buff[4], event_buff[5]);
break;
}
curr_pos++;
remain_event_count--;
} while (remain_event_count >= 0);
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
if (!ts->offload.offload_running) {
#endif
mutex_lock(&ts->eventlock);
input_sync(ts->input_dev);
mutex_unlock(&ts->eventlock);
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
}
if (processed_pointer_event) {
ret = touch_offload_reserve_frame(&ts->offload, &frame);
if (ret != 0) {
input_dbg(true, &ts->client->dev,
"Could not reserve a frame: ret=%d.\n", ret);
/* Stop offload when there are no buffers available */
sec_ts_offload_set_running(ts, false);
} else {
sec_ts_offload_set_running(ts, true);
sec_ts_populate_frame(ts, frame);
ret = touch_offload_queue_frame(&ts->offload, frame);
if (ret != 0) {
pr_err("%s: Failed to queue reserved frame: ret=%d.\n",
__func__, ret);
}
}
}
#endif
/* TODO: If the mutual strength heatmap was already read into the touch
* offload interface, use it here instead of reading again.
*/
#if IS_ENABLED(CONFIG_TOUCHSCREEN_HEATMAP)
if (processed_pointer_event) {
heatmap_read(&ts->v4l2, ktime_to_ns(ts->timestamp));
/* palm */
if (last_tid_palm_state == 0 &&
ts->tid_palm_state >= 1) {
input_info(true, &ts->client->dev,
"COORD: detect palm enter(tid 0x0 -> %#x)\n",
ts->tid_palm_state);
}
if (last_tid_palm_state >= 1 &&
ts->tid_palm_state == 0) {
input_info(true, &ts->client->dev,
"COORD: detect palm leave(tid %#x -> 0x0), tid_touch %#x\n",
last_tid_palm_state, ts->tid_touch_state);
if (ts->touch_count || ts->tid_touch_state) {
ts->palms_leaved_once = true;
input_dbg(true, &ts->client->dev,
"COORD: wait all finger(s) release after palm entered\n");
}
}
/* grip */
if (last_tid_grip_state == 0 &&
ts->tid_grip_state >= 1) {
input_info(true, &ts->client->dev,
"COORD: detect grip enter(tid 0x0 -> %#x)\n",
ts->tid_grip_state);
}
if (last_tid_grip_state >= 1 &&
ts->tid_grip_state == 0) {
input_info(true, &ts->client->dev,
"COORD: detect grip leave(tid %#x -> 0x0), tid_touch %#x\n",
last_tid_grip_state, ts->tid_touch_state);
if (ts->touch_count || ts->tid_touch_state) {
ts->grips_leaved_once = true;
input_dbg(true, &ts->client->dev,
"COORD: wait all finger(s) release after grip entered\n");
}
}
if ((ts->touch_count == 0 || ts->tid_touch_state == 0) &&
(ts->palms_leaved_once || ts->grips_leaved_once)) {
ts->palms_leaved_once = false;
ts->grips_leaved_once = false;
input_info(true, &ts->client->dev,
"COORD: all fingers released with palm(s)/grip(s) leaved once\n");
}
}
#endif
}
static irqreturn_t sec_ts_isr(int irq, void *handle)
{
struct sec_ts_data *ts = (struct sec_ts_data *)handle;
ts->timestamp = ktime_get();
#if !IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
input_set_timestamp(ts->input_dev, ts->timestamp);
#endif
return IRQ_WAKE_THREAD;
}
static irqreturn_t sec_ts_irq_thread(int irq, void *ptr)
{
struct sec_ts_data *ts = (struct sec_ts_data *)ptr;
if (sec_ts_set_bus_ref(ts, SEC_TS_BUS_REF_IRQ, true) < 0) {
/* Interrupt during bus suspend */
input_info(true, &ts->client->dev,
"%s: Skipping stray interrupt since bus is suspended(power_status: %d)\n",
__func__, ts->power_status);
return IRQ_HANDLED;
}
/* prevent CPU from entering deep sleep */
pm_qos_update_request(&ts->pm_qos_req, 100);
pm_wakeup_event(&ts->client->dev, MSEC_PER_SEC);
sec_ts_read_event(ts);
#if IS_ENABLED(CONFIG_TOUCHSCREEN_HEATMAP)
/* Disable the firmware motion filter during single touch */
update_motion_filter(ts);
#endif
pm_qos_update_request(&ts->pm_qos_req, PM_QOS_DEFAULT_VALUE);
sec_ts_set_bus_ref(ts, SEC_TS_BUS_REF_IRQ, false);
return IRQ_HANDLED;
}
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
static void sec_ts_offload_report(void *handle,
struct TouchOffloadIocReport *report)
{
struct sec_ts_data *ts = (struct sec_ts_data *)handle;
bool touch_down = 0;
int i;
mutex_lock(&ts->eventlock);
input_set_timestamp(ts->input_dev, report->timestamp);
for (i = 0; i < MAX_COORDS; i++) {
if (report->coords[i].status != COORD_STATUS_INACTIVE) {
int mt_tool = MT_TOOL_FINGER;
input_mt_slot(ts->input_dev, i);
touch_down = 1;
input_report_key(ts->input_dev, BTN_TOUCH,
touch_down);
if (report->coords[i].status == COORD_STATUS_EDGE ||
report->coords[i].status == COORD_STATUS_PALM ||
report->coords[i].status == COORD_STATUS_CANCEL)
mt_tool = MT_TOOL_PALM;
input_mt_report_slot_state(ts->input_dev,
mt_tool, 1);
input_report_abs(ts->input_dev, ABS_MT_POSITION_X,
report->coords[i].x);
input_report_abs(ts->input_dev, ABS_MT_POSITION_Y,
report->coords[i].y);
input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR,
report->coords[i].major);
input_report_abs(ts->input_dev, ABS_MT_TOUCH_MINOR,
report->coords[i].minor);
if (ts->plat_data->support_mt_pressure)
input_report_abs(ts->input_dev,
ABS_MT_PRESSURE,
report->coords[i].pressure);
} else {
input_mt_slot(ts->input_dev, i);
input_report_abs(ts->input_dev, ABS_MT_PRESSURE, 0);
input_mt_report_slot_state(ts->input_dev,
MT_TOOL_FINGER, 0);
input_report_abs(ts->input_dev, ABS_MT_TRACKING_ID,
-1);
}
}
input_report_key(ts->input_dev, BTN_TOUCH, touch_down);
input_sync(ts->input_dev);
mutex_unlock(&ts->eventlock);
}
#endif /* CONFIG_TOUCHSCREEN_OFFLOAD */
int get_tsp_status(void)
{
return 0;
}
EXPORT_SYMBOL(get_tsp_status);
int sec_ts_glove_mode_enables(struct sec_ts_data *ts, int mode)
{
int ret;
if (mode)
ts->touch_functions = (ts->touch_functions |
SEC_TS_BIT_SETFUNC_GLOVE |
SEC_TS_DEFAULT_ENABLE_BIT_SETFUNC);
else
ts->touch_functions = ((ts->touch_functions &
(~SEC_TS_BIT_SETFUNC_GLOVE)) |
SEC_TS_DEFAULT_ENABLE_BIT_SETFUNC);
if (ts->power_status == SEC_TS_STATE_POWER_OFF) {
input_err(true, &ts->client->dev,
"%s: pwr off, glove:%d, status:%x\n", __func__,
mode, ts->touch_functions);
goto glove_enable_err;
}
ret = sec_ts_write(ts, SEC_TS_CMD_SET_TOUCHFUNCTION,
(u8 *)&ts->touch_functions, 2);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: Failed to send command", __func__);
goto glove_enable_err;
}
input_info(true, &ts->client->dev,
"%s: glove:%d, status:%x\n", __func__,
mode, ts->touch_functions);
return 0;
glove_enable_err:
return -EIO;
}
EXPORT_SYMBOL(sec_ts_glove_mode_enables);
int sec_ts_set_cover_type(struct sec_ts_data *ts, bool enable)
{
int ret;
input_info(true, &ts->client->dev, "%s: %d\n",
__func__, ts->cover_type);
switch (ts->cover_type) {
case SEC_TS_VIEW_WIRELESS:
case SEC_TS_VIEW_COVER:
case SEC_TS_VIEW_WALLET:
case SEC_TS_FLIP_WALLET:
case SEC_TS_LED_COVER:
case SEC_TS_MONTBLANC_COVER:
case SEC_TS_CLEAR_FLIP_COVER:
case SEC_TS_QWERTY_KEYBOARD_EUR:
case SEC_TS_QWERTY_KEYBOARD_KOR:
ts->cover_cmd = (u8)ts->cover_type;
break;
case SEC_TS_CHARGER_COVER:
case SEC_TS_COVER_NOTHING1:
case SEC_TS_COVER_NOTHING2:
default:
ts->cover_cmd = 0;
input_err(true, &ts->client->dev,
"%s: not chage touch state, %d\n",
__func__, ts->cover_type);
break;
}
if (enable)
ts->touch_functions = (ts->touch_functions |
SEC_TS_BIT_SETFUNC_COVER |
SEC_TS_DEFAULT_ENABLE_BIT_SETFUNC);
else
ts->touch_functions = ((ts->touch_functions &
(~SEC_TS_BIT_SETFUNC_COVER)) |
SEC_TS_DEFAULT_ENABLE_BIT_SETFUNC);
if (ts->power_status == SEC_TS_STATE_POWER_OFF) {
input_err(true, &ts->client->dev,
"%s: pwr off, close:%d, status:%x\n", __func__,
enable, ts->touch_functions);
goto cover_enable_err;
}
if (enable) {
ret = sec_ts_write(ts, SEC_TS_CMD_SET_COVERTYPE,
&ts->cover_cmd, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: Failed to send covertype command: %d",
__func__, ts->cover_cmd);
goto cover_enable_err;
}
}
ret = sec_ts_write(ts, SEC_TS_CMD_SET_TOUCHFUNCTION,
(u8 *)&(ts->touch_functions), 2);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: Failed to send command", __func__);
goto cover_enable_err;
}
input_info(true, &ts->client->dev,
"%s: close:%d, status:%x\n", __func__,
enable, ts->touch_functions);
return 0;
cover_enable_err:
return -EIO;
}
EXPORT_SYMBOL(sec_ts_set_cover_type);
void sec_ts_set_grip_type(struct sec_ts_data *ts, u8 set_type)
{
u8 mode = G_NONE;
input_info(true, &ts->client->dev,
"%s: re-init grip(%d), edh:%d, edg:%d, lan:%d\n", __func__,
set_type, ts->grip_edgehandler_direction, ts->grip_edge_range,
ts->grip_landscape_mode);
/* edge handler */
if (ts->grip_edgehandler_direction != 0)
mode |= G_SET_EDGE_HANDLER;
if (set_type == GRIP_ALL_DATA) {
/* edge */
if (ts->grip_edge_range != 60)
mode |= G_SET_EDGE_ZONE;
/* dead zone */
if (ts->grip_landscape_mode == 1) /* default 0 mode, 32 */
mode |= G_SET_LANDSCAPE_MODE;
else
mode |= G_SET_NORMAL_MODE;
}
if (mode)
set_grip_data_to_ic(ts, mode);
}
/* for debugging--------------------------------------------------------------*/
static int sec_ts_pinctrl_configure(struct sec_ts_data *ts, bool enable)
{
struct pinctrl_state *state;
input_info(true, &ts->client->dev, "%s: %s\n",
__func__, enable ? "ACTIVE" : "SUSPEND");
if (enable) {
state = pinctrl_lookup_state(ts->plat_data->pinctrl,
"on_state");
if (IS_ERR(ts->plat_data->pinctrl))
input_err(true, &ts->client->dev,
"%s: could not get active pinstate\n",
__func__);
} else {
state = pinctrl_lookup_state(ts->plat_data->pinctrl,
"off_state");
if (IS_ERR(ts->plat_data->pinctrl))
input_err(true, &ts->client->dev,
"%s: could not get suspend pinstate\n",
__func__);
}
if (!IS_ERR_OR_NULL(state))
return pinctrl_select_state(ts->plat_data->pinctrl, state);
return 0;
}
static int sec_ts_power(void *data, bool on)
{
struct sec_ts_data *ts = (struct sec_ts_data *)data;
const struct sec_ts_plat_data *pdata = ts->plat_data;
struct regulator *regulator_dvdd = NULL;
struct regulator *regulator_avdd = NULL;
static bool dvdd_enabled, avdd_enabled;
int ret = 0;
if (pdata->regulator_dvdd) {
regulator_dvdd = regulator_get(&ts->client->dev,
pdata->regulator_dvdd);
if (IS_ERR_OR_NULL(regulator_dvdd))
input_err(true, &ts->client->dev,
"%s: Failed to get %s regulator.\n",
__func__, pdata->regulator_dvdd);
}
if (pdata->regulator_avdd) {
regulator_avdd = regulator_get(&ts->client->dev,
pdata->regulator_avdd);
if (IS_ERR_OR_NULL(regulator_avdd))
input_err(true, &ts->client->dev,
"%s: Failed to get %s regulator.\n",
__func__, pdata->regulator_avdd);
}
if (regulator_dvdd && (dvdd_enabled != on)) {
ret = (on) ? regulator_enable(regulator_dvdd) :
regulator_disable(regulator_dvdd);
if (ret)
input_err(true, &ts->client->dev,
"%s: Failed to control dvdd: %d\n",
__func__, ret);
else {
sec_ts_delay(1);
dvdd_enabled = on;
}
}
if (regulator_avdd && (avdd_enabled != on)) {
ret = (on) ? regulator_enable(regulator_avdd) :
regulator_disable(regulator_avdd);
if (ret)
input_err(true, &ts->client->dev,
"%s: Failed to control avdd: %d\n",
__func__, ret);
else
avdd_enabled = on;
}
if (regulator_dvdd) {
input_info(true, &ts->client->dev, "%s: %s: dvdd:%s\n",
__func__, on ? "on" : "off",
regulator_is_enabled(regulator_dvdd) ? "on" : "off");
regulator_put(regulator_dvdd);
}
if (regulator_avdd) {
input_info(true, &ts->client->dev, "%s: %s: avdd:%s\n",
__func__, on ? "on" : "off",
regulator_is_enabled(regulator_avdd) ? "on" : "off");
regulator_put(regulator_avdd);
}
return ret;
}
#ifdef I2C_INTERFACE
static int sec_ts_parse_dt(struct i2c_client *client)
#else
static int sec_ts_parse_dt(struct spi_device *client)
#endif
{
struct device *dev = &client->dev;
struct sec_ts_plat_data *pdata = dev->platform_data;
struct device_node *np = dev->of_node;
u32 coords[2];
int ret = 0;
int count = 0;
u32 ic_match_value;
int lcdtype = 0;
#if defined(CONFIG_EXYNOS_DECON_FB)
int connected;
#endif
int index;
struct of_phandle_args panelmap;
struct drm_panel *panel = NULL;
if (of_property_read_bool(np, "sec,panel_map")) {
for (index = 0 ;; index++) {
ret = of_parse_phandle_with_fixed_args(np,
"sec,panel_map",
1,
index,
&panelmap);
if (ret)
return -EPROBE_DEFER;
panel = of_drm_find_panel(panelmap.np);
of_node_put(panelmap.np);
if (!IS_ERR_OR_NULL(panel)) {
pdata->panel = panel;
pdata->initial_panel_index = panelmap.args[0];
break;
}
}
}
pdata->tsp_icid = of_get_named_gpio(np, "sec,tsp-icid_gpio", 0);
if (gpio_is_valid(pdata->tsp_icid)) {
input_info(true, dev, "%s: TSP_ICID : %d\n",
__func__, gpio_get_value(pdata->tsp_icid));
if (of_property_read_u32(np, "sec,icid_match_value",
&ic_match_value)) {
input_err(true, dev,
"%s: Failed to get icid match value\n",
__func__);
return -EINVAL;
}
if (gpio_get_value(pdata->tsp_icid) != ic_match_value) {
input_err(true, dev,
"%s: Do not match TSP_ICID\n", __func__);
return -EINVAL;
}
} else {
input_dbg(true, dev,
"%s: Failed to get tsp-icid gpio\n", __func__);
}
pdata->tsp_vsync = of_get_named_gpio(np, "sec,tsp_vsync_gpio", 0);
if (gpio_is_valid(pdata->tsp_vsync))
input_info(true, &client->dev, "%s: vsync %s\n", __func__,
gpio_get_value(pdata->tsp_vsync) ?
"disable" : "enable");
pdata->irq_gpio = of_get_named_gpio(np, "sec,irq_gpio", 0);
if (gpio_is_valid(pdata->irq_gpio)) {
ret = gpio_request_one(pdata->irq_gpio, GPIOF_DIR_IN,
"sec,tsp_int");
if (ret) {
input_err(true, &client->dev,
"%s: Unable to request tsp_int [%d]\n",
__func__, pdata->irq_gpio);
return -EINVAL;
}
} else {
input_err(true, &client->dev,
"%s: Failed to get irq gpio\n", __func__);
return -EINVAL;
}
client->irq = gpio_to_irq(pdata->irq_gpio);
if (of_property_read_u32(np, "sec,irq_type", &pdata->irq_type)) {
input_dbg(true, dev,
"%s: no irq_type property, set to default!\n",
__func__);
pdata->irq_type = IRQF_TRIGGER_LOW | IRQF_ONESHOT;
}
if (of_property_read_u32(np, "sec,i2c-burstmax", &pdata->io_burstmax)) {
input_dbg(false, &client->dev,
"%s: Failed to get io_burstmax property\n", __func__);
pdata->io_burstmax = 1024; //TODO: check this
}
if (pdata->io_burstmax > IO_PREALLOC_READ_BUF_SZ ||
pdata->io_burstmax > IO_PREALLOC_WRITE_BUF_SZ) {
input_err(true, &client->dev,
"%s: io_burstmax is larger than io_read_buf and/or io_write_buf.\n",
__func__);
//TODO: check this
// return -EINVAL;
}
if (of_property_read_u32_array(np, "sec,max_coords", coords, 2)) {
input_err(true, &client->dev,
"%s: Failed to get max_coords property\n", __func__);
return -EINVAL;
}
pdata->max_x = coords[0] - 1;
pdata->max_y = coords[1] - 1;
#ifdef PAT_CONTROL
if (of_property_read_u32(np, "sec,pat_function",
&pdata->pat_function) < 0) {
pdata->pat_function = 0;
input_err(true, dev,
"%s: Failed to get pat_function property\n", __func__);
}
if (of_property_read_u32(np, "sec,afe_base", &pdata->afe_base) < 0) {
pdata->afe_base = 0;
input_err(true, dev,
"%s: Failed to get afe_base property\n", __func__);
}
#endif
pdata->tsp_id = of_get_named_gpio(np, "sec,tsp-id_gpio", 0);
if (gpio_is_valid(pdata->tsp_id))
input_info(true, dev, "%s: TSP_ID : %d\n", __func__,
gpio_get_value(pdata->tsp_id));
else
input_dbg(true, dev,
"%s: Failed to get tsp-id gpio\n", __func__);
pdata->switch_gpio = of_get_named_gpio(np,
"sec,switch_gpio", 0);
if (gpio_is_valid(pdata->switch_gpio)) {
ret = gpio_request_one(pdata->switch_gpio,
GPIOF_OUT_INIT_LOW,
"sec,touch_i2c_switch");
if (ret) {
input_err(true, dev,
"%s: Failed to request gpio %d\n",
__func__, pdata->switch_gpio);
return -EINVAL;
}
ret = gpio_direction_output(pdata->switch_gpio,
SEC_SWITCH_GPIO_VALUE_AP_MASTER);
if (ret) {
input_err(true, dev,
"%s: Failed to set gpio %d direction\n",
__func__, pdata->switch_gpio);
return -EINVAL;
}
} else {
input_err(true, dev, "%s: Failed to get switch_gpio\n",
__func__);
}
pdata->reset_gpio = of_get_named_gpio(np, "sec,reset_gpio", 0);
if (gpio_is_valid(pdata->reset_gpio)) {
ret = gpio_request_one(pdata->reset_gpio,
GPIOF_OUT_INIT_HIGH,
"sec,touch_reset_gpio");
if (ret) {
input_err(true, dev,
"%s: Failed to request gpio %d, ret %d\n",
__func__, pdata->reset_gpio, ret);
pdata->reset_gpio = -1;
}
//TODO: check this
ret = gpio_direction_output(pdata->reset_gpio, 1);
mdelay(10);
ret = gpio_direction_output(pdata->reset_gpio, 0);
mdelay(10);
ret = gpio_direction_output(pdata->reset_gpio, 1);
} else
input_err(true, dev, "%s: Failed to get reset_gpio\n",
__func__);
count = of_property_count_strings(np, "sec,firmware_name");
if (count <= 0) {
pdata->firmware_name = NULL;
} else {
if (gpio_is_valid(pdata->tsp_id))
of_property_read_string_index(np, "sec,firmware_name",
gpio_get_value(pdata->tsp_id),
&pdata->firmware_name);
else
of_property_read_string_index(np, "sec,firmware_name",
0, &pdata->firmware_name);
}
if (of_property_read_string_index(np, "sec,project_name", 0,
&pdata->project_name))
input_dbg(true, &client->dev,
"%s: skipped to get project_name property\n", __func__);
if (of_property_read_string_index(np, "sec,project_name",
1, &pdata->model_name))
input_dbg(true, &client->dev,
"%s: skipped to get model_name property\n", __func__);
#if defined(CONFIG_FB_MSM_MDSS_SAMSUNG)
lcdtype = get_lcd_attached("GET");
if (lcdtype < 0) {
input_err(true, &client->dev,
"%s: lcd is not attached\n", __func__);
return -ENODEV;
}
#endif
#if defined(CONFIG_EXYNOS_DECON_FB)
connected = get_lcd_info("connected");
if (connected < 0) {
input_err(true, dev, "%s: Failed to get lcd info\n", __func__);
return -EINVAL;
}
if (!connected) {
input_err(true, &client->dev,
"%s: lcd is disconnected\n", __func__);
return -ENODEV;
}
input_info(true, &client->dev, "%s: lcd is connected\n", __func__);
lcdtype = get_lcd_info("id");
if (lcdtype < 0) {
input_err(true, dev, "%s: Failed to get lcd info\n", __func__);
return -EINVAL;
}
#endif
input_info(true, &client->dev,
"%s: lcdtype 0x%08X\n", __func__, lcdtype);
if (pdata->model_name && strncmp(pdata->model_name, "G950", 4) == 0)
pdata->panel_revision = 0;
else
pdata->panel_revision = ((lcdtype >> 8) & 0xFF) >> 4;
if (of_property_read_string(np,
"sec,regulator_dvdd", &pdata->regulator_dvdd))
input_dbg(true, dev,
"%s: Failed to get regulator_dvdd name property\n",
__func__);
if (of_property_read_string(np,
"sec,regulator_avdd", &pdata->regulator_avdd))
input_dbg(true, dev,
"%s: Failed to get regulator_avdd name property\n",
__func__);
pdata->power = sec_ts_power;
if (of_property_read_u32(np, "sec,always_lpmode",
&pdata->always_lpmode) < 0)
pdata->always_lpmode = 0;
if (of_property_read_u32(np, "sec,bringup", &pdata->bringup) < 0)
pdata->bringup = 0;
if (of_property_read_u32(np, "sec,mis_cal_check",
&pdata->mis_cal_check) < 0)
pdata->mis_cal_check = 0;
if (of_property_read_u32(np, "sec,heatmap_mode",
&pdata->heatmap_mode) < 0)
pdata->heatmap_mode = 0;
pdata->regulator_boot_on = of_property_read_bool(np,
"sec,regulator_boot_on");
pdata->support_sidegesture = of_property_read_bool(np,
"sec,support_sidegesture");
pdata->support_dex = of_property_read_bool(np, "support_dex_mode");
pdata->support_mt_pressure = true;
#ifdef PAT_CONTROL
input_info(true, &client->dev,
"%s: buffer limit: %d, lcd_id:%06X, bringup:%d, FW:%s(%d), id:%d,%d, pat_function:%d mis_cal:%d dex:%d, gesture:%d\n",
__func__, pdata->io_burstmax, lcdtype, pdata->bringup,
pdata->firmware_name, count, pdata->tsp_id, pdata->tsp_icid,
pdata->pat_function, pdata->mis_cal_check, pdata->support_dex,
pdata->support_sidegesture);
#else
input_info(true, &client->dev,
"%s: buffer limit: %d, lcd_id:%06X, bringup:%d, FW:%s(%d), id:%d,%d, dex:%d, gesture:%d\n",
__func__, pdata->io_burstmax, lcdtype, pdata->bringup,
pdata->firmware_name, count, pdata->tsp_id, pdata->tsp_icid,
pdata->support_dex, pdata->support_sidegesture);
#endif
return ret;
}
int sec_ts_read_information(struct sec_ts_data *ts)
{
unsigned char data[13] = { 0 };
int ret;
sec_ts_set_bus_ref(ts, SEC_TS_BUS_REF_READ_INFO, true);
memset(data, 0x0, 3);
ret = sec_ts_read(ts, SEC_TS_READ_ID, data, 3);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: failed to read device id(%d)\n",
__func__, ret);
goto out;
}
input_info(true, &ts->client->dev,
"%s: %X, %X, %X\n",
__func__, data[0], data[1], data[2]);
memset(data, 0x0, 11);
ret = sec_ts_read(ts, SEC_TS_READ_PANEL_INFO, data, 11);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: failed to read sub id(%d)\n",
__func__, ret);
goto out;
}
input_info(true, &ts->client->dev,
"%s: nTX:%X, nRX:%X, rY:%d, rX:%d\n",
__func__, data[8], data[9],
(data[2] << 8) | data[3], (data[0] << 8) | data[1]);
/* Set X,Y Resolution from IC information. */
if (((data[0] << 8) | data[1]) > 0)
ts->plat_data->max_x = ((data[0] << 8) | data[1]) - 1;
if (((data[2] << 8) | data[3]) > 0)
ts->plat_data->max_y = ((data[2] << 8) | data[3]) - 1;
ts->tx_count = data[8];
ts->rx_count = data[9];
data[0] = 0;
ret = sec_ts_read(ts, SEC_TS_READ_BOOT_STATUS, data, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: failed to read sub id(%d)\n",
__func__, ret);
goto out;
}
input_info(true, &ts->client->dev,
"%s: STATUS : %X\n",
__func__, data[0]);
memset(data, 0x0, 4);
ret = sec_ts_read(ts, SEC_TS_READ_TS_STATUS, data, 4);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: failed to read sub id(%d)\n",
__func__, ret);
goto out;
}
input_info(true, &ts->client->dev,
"%s: TOUCH STATUS : %02X, %02X, %02X, %02X\n",
__func__, data[0], data[1], data[2], data[3]);
ret = sec_ts_read(ts, SEC_TS_CMD_SET_TOUCHFUNCTION,
(u8 *)&(ts->touch_functions), 2);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: failed to read touch functions(%d)\n",
__func__, ret);
goto out;
}
input_info(true, &ts->client->dev,
"%s: Functions : %02X\n",
__func__, ts->touch_functions);
out:
sec_ts_set_bus_ref(ts, SEC_TS_BUS_REF_READ_INFO, false);
return ret;
}
#ifdef SEC_TS_SUPPORT_CUSTOMLIB
int sec_ts_set_custom_library(struct sec_ts_data *ts)
{
u8 data[3] = { 0 };
int ret;
input_err(true, &ts->client->dev, "%s: Custom Library (0x%02x)\n",
__func__, ts->lowpower_mode);
data[2] = ts->lowpower_mode;
ret = sec_ts_write(ts, SEC_TS_CMD_CUSTOMLIB_WRITE_PARAM, &data[0], 3);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: Failed to Custom Library\n", __func__);
ret = sec_ts_write(ts, SEC_TS_CMD_CUSTOMLIB_NOTIFY_PACKET, NULL, 0);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: Failed to send NOTIFY Custom Library\n", __func__);
return ret;
}
int sec_ts_check_custom_library(struct sec_ts_data *ts)
{
u8 data[10] = { 0 };
int ret = -1;
ret = ts->sec_ts_read(ts, SEC_TS_CMD_CUSTOMLIB_GET_INFO, &data[0], 10);
input_info(true, &ts->client->dev,
"%s: (%d) %c%c%c%c, || %02X, %02X, %02X, %02X, || %02X, %02X\n",
__func__, ret, data[0], data[1], data[2], data[3], data[4],
data[5], data[6], data[7], data[8], data[9]);
/* compare model name with device tree */
if (ts->plat_data->model_name)
ret = strncmp(data, ts->plat_data->model_name, 4);
if (ret == 0)
ts->use_customlib = true;
else
ts->use_customlib = false;
input_err(true, &ts->client->dev, "%s: use %s\n",
__func__, ts->use_customlib ? "CUSTOMLIB" : "VENDOR");
return ret;
}
#endif
static void sec_ts_set_input_prop(struct sec_ts_data *ts,
struct input_dev *dev, u8 propbit)
{
static char sec_ts_phys[64] = { 0 };
snprintf(sec_ts_phys, sizeof(sec_ts_phys), "%s/input1",
dev->name);
dev->phys = sec_ts_phys;
#ifdef I2C_INTERFACE
dev->id.bustype = BUS_I2C;
#else
dev->id.bustype = BUS_SPI;
#endif
dev->dev.parent = &ts->client->dev;
set_bit(EV_SYN, dev->evbit);
set_bit(EV_KEY, dev->evbit);
set_bit(EV_ABS, dev->evbit);
set_bit(EV_SW, dev->evbit);
set_bit(BTN_TOUCH, dev->keybit);
set_bit(BTN_TOOL_FINGER, dev->keybit);
#ifdef SEC_TS_SUPPORT_CUSTOMLIB
set_bit(KEY_BLACK_UI_GESTURE, dev->keybit);
#endif
#ifdef SEC_TS_SUPPORT_TOUCH_KEY
if (ts->plat_data->support_mskey) {
int i;
for (i = 0 ; i < ts->plat_data->num_touchkey ; i++)
set_bit(ts->plat_data->touchkey[i].keycode,
dev->keybit);
set_bit(EV_LED, dev->evbit);
set_bit(LED_MISC, dev->ledbit);
}
#endif
#ifdef KEY_SIDE_GESTURE
if (ts->plat_data->support_sidegesture) {
set_bit(KEY_SIDE_GESTURE, dev->keybit);
set_bit(KEY_SIDE_GESTURE_RIGHT, dev->keybit);
set_bit(KEY_SIDE_GESTURE_LEFT, dev->keybit);
}
#endif
set_bit(propbit, dev->propbit);
set_bit(KEY_HOMEPAGE, dev->keybit);
#ifdef SW_GLOVE
input_set_capability(dev, EV_SW, SW_GLOVE);
#endif
input_set_abs_params(dev, ABS_MT_POSITION_X, 0, ts->plat_data->max_x,
0, 0);
input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, ts->plat_data->max_y,
0, 0);
input_set_abs_params(dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
input_set_abs_params(dev, ABS_MT_TOUCH_MINOR, 0, 255, 0, 0);
input_set_abs_params(dev, ABS_MT_TOOL_TYPE, MT_TOOL_FINGER,
MT_TOOL_FINGER, 0, 0);
#ifdef ABS_MT_CUSTOM
input_set_abs_params(dev, ABS_MT_CUSTOM, 0, 0xFFFF, 0, 0);
#endif
if (ts->plat_data->support_mt_pressure)
input_set_abs_params(dev, ABS_MT_PRESSURE, 0,
SEC_TS_PRESSURE_MAX, 0, 0);
if (propbit == INPUT_PROP_POINTER)
input_mt_init_slots(dev, MAX_SUPPORT_TOUCH_COUNT,
INPUT_MT_POINTER);
else
input_mt_init_slots(dev, MAX_SUPPORT_TOUCH_COUNT,
INPUT_MT_DIRECT);
input_set_drvdata(dev, ts);
}
static int sec_ts_fw_init(struct sec_ts_data *ts)
{
int ret = SEC_TS_ERR_NA;
bool force_update = false;
bool valid_firmware_integrity = false;
unsigned char data[5] = { 0 };
unsigned char deviceID[5] = { 0 };
unsigned char result = 0;
ret = sec_ts_read(ts, SEC_TS_READ_DEVICE_ID, deviceID, 5);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: failed to read device ID(%d)\n",
__func__, ret);
else
input_info(true, &ts->client->dev,
"%s: TOUCH DEVICE ID : %02X, %02X, %02X, %02X, %02X\n",
__func__, deviceID[0], deviceID[1], deviceID[2],
deviceID[3], deviceID[4]);
ret = sec_ts_read(ts, SEC_TS_READ_FIRMWARE_INTEGRITY, &result, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: failed to integrity check (%d)\n",
__func__, ret);
} else {
if (result & 0x80)
valid_firmware_integrity = true;
else
input_err(true, &ts->client->dev,
"%s: invalid integrity result (0x%x)\n",
__func__, result);
}
ret = sec_ts_read(ts, SEC_TS_READ_BOOT_STATUS, &data[0], 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: failed to read sub id(%d)\n", __func__, ret);
} else {
ret = sec_ts_read(ts, SEC_TS_READ_TS_STATUS, &data[1], 4);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: failed to touch status(%d)\n",
__func__, ret);
}
input_info(true, &ts->client->dev,
"%s: TOUCH STATUS : %02X || %02X, %02X, %02X, %02X\n",
__func__, data[0], data[1], data[2], data[3], data[4]);
if (data[0] == SEC_TS_STATUS_BOOT_MODE)
ts->checksum_result = 1;
if (((data[0] == SEC_TS_STATUS_APP_MODE &&
data[2] == TOUCH_SYSTEM_MODE_FLASH) || ret < 0) &&
(valid_firmware_integrity == false))
force_update = true;
ret = sec_ts_read_information(ts);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: fail to read information 0x%x\n",
__func__, ret);
return SEC_TS_ERR_INIT;
}
ts->touch_functions |= SEC_TS_DEFAULT_ENABLE_BIT_SETFUNC;
ret = sec_ts_write(ts, SEC_TS_CMD_SET_TOUCHFUNCTION,
(u8 *)&ts->touch_functions, 2);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: Failed to send touch func_mode command",
__func__);
/* Sense_on */
ret = sec_ts_write(ts, SEC_TS_CMD_SENSE_ON, NULL, 0);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: fail to write Sense_on 0x%x\n",
__func__, ret);
return SEC_TS_ERR_INIT;
}
ts->pFrame = kzalloc(ts->tx_count * ts->rx_count * 2, GFP_KERNEL);
if (!ts->pFrame)
return SEC_TS_ERR_ALLOC_FRAME;
ts->gainTable = kzalloc(ts->tx_count * ts->rx_count, GFP_KERNEL);
if (!ts->gainTable) {
kfree(ts->pFrame);
ts->pFrame = NULL;
return SEC_TS_ERR_ALLOC_GAINTABLE;
}
if (ts->plat_data->support_dex) {
ts->input_dev_pad->name = "sec_touchpad";
sec_ts_set_input_prop(ts, ts->input_dev_pad,
INPUT_PROP_POINTER);
}
ts->dex_name = "";
ts->input_dev->name = "sec_touchscreen";
sec_ts_set_input_prop(ts, ts->input_dev, INPUT_PROP_DIRECT);
#ifdef USE_OPEN_CLOSE
ts->input_dev->open = sec_ts_input_open;
ts->input_dev->close = sec_ts_input_close;
#endif
ts->input_dev_touch = ts->input_dev;
ret = input_register_device(ts->input_dev);
if (ret) {
input_err(true, &ts->client->dev,
"%s: Unable to register %s input device 0x%x\n",
__func__, ts->input_dev->name, ret);
return SEC_TS_ERR_REG_INPUT_DEV;
}
if (ts->plat_data->support_dex) {
ret = input_register_device(ts->input_dev_pad);
if (ret) {
input_err(true, &ts->client->dev,
"%s: Unable to register %s input device 0x%x\n",
__func__, ts->input_dev_pad->name, ret);
return SEC_TS_ERR_REG_INPUT_PAD_DEV;
}
}
return SEC_TS_ERR_NA;
}
static void sec_ts_device_init(struct sec_ts_data *ts)
{
#if (1) //!defined(CONFIG_SAMSUNG_PRODUCT_SHIP)
sec_ts_raw_device_init(ts);
#endif
sec_ts_fn_init(ts);
#ifdef SEC_TS_SUPPORT_CUSTOMLIB
sec_ts_check_custom_library(ts);
if (ts->use_customlib)
sec_ts_set_custom_library(ts);
#endif
}
static struct notifier_block sec_ts_screen_nb;
static struct notifier_block sec_ts_psy_nb;
#ifdef I2C_INTERFACE
static int sec_ts_probe(struct i2c_client *client,
const struct i2c_device_id *id)
#else
static int sec_ts_probe(struct spi_device *client)
#endif
{
struct sec_ts_data *ts;
struct sec_ts_plat_data *pdata;
int ret = 0;
input_info(true, &client->dev, "%s\n", __func__);
#ifdef I2C_INTERFACE
input_info(true, &client->dev, "%s: I2C interface\n", __func__);
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
input_err(true, &client->dev, "%s: EIO err!\n", __func__);
return -EIO;
}
#else
input_info(true, &client->dev, "%s: SPI interface\n", __func__);
#endif
/* parse dt */
if (client->dev.of_node) {
pdata = devm_kzalloc(&client->dev,
sizeof(struct sec_ts_plat_data), GFP_KERNEL);
if (!pdata) {
input_err(true, &client->dev,
"%s: Failed to allocate platform data\n",
__func__);
goto error_allocate_pdata;
}
client->dev.platform_data = pdata;
ret = sec_ts_parse_dt(client);
if (ret) {
input_err(true, &client->dev,
"%s: Failed to parse dt\n", __func__);
goto error_allocate_mem;
}
} else {
pdata = client->dev.platform_data;
if (!pdata) {
input_err(true, &client->dev,
"%s: No platform data found\n", __func__);
goto error_allocate_pdata;
}
}
if (!pdata->power) {
input_err(true, &client->dev, "%s: No power contorl found\n",
__func__);
goto error_allocate_mem;
}
pdata->pinctrl = devm_pinctrl_get(&client->dev);
if (IS_ERR(pdata->pinctrl))
input_err(true, &client->dev, "%s: could not get pinctrl\n",
__func__);
ts = kzalloc(sizeof(struct sec_ts_data), GFP_KERNEL);
if (!ts)
goto error_allocate_mem;
ts->client = client;
ts->plat_data = pdata;
ts->crc_addr = 0x0001FE00;
ts->fw_addr = 0x00002000;
ts->para_addr = 0x18000;
ts->flash_page_size = SEC_TS_FW_BLK_SIZE_DEFAULT;
ts->sec_ts_read = sec_ts_read;
ts->sec_ts_read_heap = sec_ts_read_heap;
ts->sec_ts_write = sec_ts_write;
ts->sec_ts_write_burst = sec_ts_write_burst;
ts->sec_ts_write_burst_heap = sec_ts_write_burst_heap;
ts->sec_ts_read_bulk = sec_ts_read_bulk;
ts->sec_ts_read_bulk_heap = sec_ts_read_bulk_heap;
ts->io_burstmax = pdata->io_burstmax;
#ifdef USE_POWER_RESET_WORK
INIT_DELAYED_WORK(&ts->reset_work, sec_ts_reset_work);
#endif
INIT_WORK(&ts->suspend_work, sec_ts_suspend_work);
INIT_WORK(&ts->resume_work, sec_ts_resume_work);
INIT_WORK(&ts->charger_work, sec_ts_charger_work);
ts->event_wq = alloc_workqueue("sec_ts-event-queue", WQ_UNBOUND |
WQ_HIGHPRI | WQ_CPU_INTENSIVE, 1);
if (!ts->event_wq) {
input_err(true, &ts->client->dev,
"%s: Cannot create work thread\n", __func__);
ret = -ENOMEM;
goto error_alloc_workqueue;
}
init_completion(&ts->bus_resumed);
complete_all(&ts->bus_resumed);
#ifdef SEC_TS_FW_UPDATE_ON_PROBE
INIT_WORK(&ts->fw_update_work, sec_ts_fw_update_work);
#else
input_info(true, &ts->client->dev, "%s: fw update on probe disabled!\n",
__func__);
ts->fw_update_wq = alloc_workqueue("sec_ts-fw-update-queue",
WQ_UNBOUND | WQ_HIGHPRI |
WQ_CPU_INTENSIVE, 1);
if (!ts->fw_update_wq) {
input_err(true, &ts->client->dev,
"%s: Can't alloc fw update work thread\n",
__func__);
ret = -ENOMEM;
goto error_alloc_fw_update_wq;
}
INIT_DELAYED_WORK(&ts->fw_update_work, sec_ts_fw_update_work);
#endif
ts->is_fw_corrupted = false;
/* Assume screen is on throughout probe */
ts->bus_refmask = SEC_TS_BUS_REF_SCREEN_ON;
#ifdef I2C_INTERFACE
i2c_set_clientdata(client, ts);
#else
spi_set_drvdata(client, ts);
#endif
#if IS_ENABLED(CONFIG_TOUCHSCREEN_TBN)
ts->tbn = tbn_init(&ts->client->dev);
if (!ts->tbn) {
input_err(true, &ts->client->dev,
"%s: TBN initialization error\n", __func__);
ret = -ENODEV;
goto err_init_tbn;
}
#endif
if (gpio_is_valid(ts->plat_data->tsp_id))
ts->tspid_val = gpio_get_value(ts->plat_data->tsp_id);
if (gpio_is_valid(ts->plat_data->tsp_icid))
ts->tspicid_val = gpio_get_value(ts->plat_data->tsp_icid);
ts->input_dev = input_allocate_device();
if (!ts->input_dev) {
input_err(true, &ts->client->dev,
"%s: allocate device err!\n", __func__);
ret = -ENOMEM;
goto err_allocate_input_dev;
}
if (ts->plat_data->support_dex) {
ts->input_dev_pad = input_allocate_device();
if (!ts->input_dev_pad) {
input_err(true, &ts->client->dev,
"%s: allocate device err!\n", __func__);
ret = -ENOMEM;
goto err_allocate_input_dev_pad;
}
}
ts->touch_count = 0;
ts->tid_palm_state = 0;
ts->tid_grip_state = 0;
ts->tid_touch_state = 0;
ts->palms_leaved_once = false;
ts->grips_leaved_once = false;
ts->sec_ts_write = sec_ts_write;
ts->sec_ts_read = sec_ts_read;
ts->sec_ts_read_heap = sec_ts_read_heap;
ts->sec_ts_read_customlib = sec_ts_read_from_customlib;
ts->max_z_value = 0;
ts->min_z_value = 0xFFFFFFFF;
ts->sum_z_value = 0;
mutex_init(&ts->bus_mutex);
mutex_init(&ts->lock);
mutex_init(&ts->device_mutex);
mutex_init(&ts->io_mutex);
mutex_init(&ts->eventlock);
init_completion(&ts->resume_done);
complete_all(&ts->resume_done);
init_completion(&ts->boot_completed);
complete_all(&ts->boot_completed);
if (pdata->always_lpmode)
ts->lowpower_mode |= SEC_TS_MODE_CUSTOMLIB_FORCE_KEY;
else
ts->lowpower_mode &= ~SEC_TS_MODE_CUSTOMLIB_FORCE_KEY;
sec_ts_pinctrl_configure(ts, true);
/* power enable */
sec_ts_power(ts, true);
if (!pdata->regulator_boot_on)
sec_ts_delay(70);
ts->power_status = SEC_TS_STATE_POWER_ON;
ts->external_factory = false;
ret = sec_ts_wait_for_ready(ts, SEC_TS_ACK_BOOT_COMPLETE);
if (ret < 0) {
u8 boot_status;
/* Read the boot status in case device is in bootloader mode */
ret = ts->sec_ts_read(ts, SEC_TS_READ_BOOT_STATUS,
&boot_status, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: could not read boot status. Assuming no device connected.\n",
__func__);
goto err_init;
}
input_info(true, &ts->client->dev,
"%s: Attempting to reflash the firmware. Boot status = 0x%02X\n",
__func__, boot_status);
if (boot_status != SEC_TS_STATUS_BOOT_MODE)
input_err(true, &ts->client->dev,
"%s: device is not in bootloader mode!\n",
__func__);
ts->is_fw_corrupted = true;
}
input_info(true, &client->dev, "%s: power enable\n", __func__);
if (ts->is_fw_corrupted == false) {
switch (sec_ts_fw_init(ts)) {
case SEC_TS_ERR_INIT:
goto err_init;
case SEC_TS_ERR_ALLOC_FRAME:
goto err_allocate_frame;
case SEC_TS_ERR_ALLOC_GAINTABLE:
goto err_allocate_gaintable;
case SEC_TS_ERR_REG_INPUT_DEV:
goto err_input_register_device;
case SEC_TS_ERR_REG_INPUT_PAD_DEV:
goto err_input_pad_register_device;
}
}
pm_qos_add_request(&ts->pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
PM_QOS_DEFAULT_VALUE);
ts->ignore_charger_nb = 0;
/* init motion filter mode */
ts->use_default_mf = 0;
ts->mf_state = SEC_TS_MF_FILTERED;
#if IS_ENABLED(CONFIG_TOUCHSCREEN_HEATMAP)
/*
* Heatmap_probe must be called before irq routine is registered,
* because heatmap_read is called from the irq context.
* If the ISR runs before heatmap_probe is finished, it will invoke
* heatmap_read and cause NPE, since read_frame would not yet be set.
*/
ts->v4l2.parent_dev = &ts->client->dev;
ts->v4l2.input_dev = ts->input_dev;
ts->v4l2.read_frame = read_heatmap_raw;
ts->v4l2.width = ts->tx_count;
ts->v4l2.height = ts->rx_count;
/* 120 Hz operation */
ts->v4l2.timeperframe.numerator = 1;
ts->v4l2.timeperframe.denominator = 120;
ret = heatmap_probe(&ts->v4l2);
if (ret) {
input_err(true, &ts->client->dev,
"%s: Heatmap probe failed\n", __func__);
goto err_irq;
}
#endif
input_info(true, &ts->client->dev, "%s: request_irq = %d\n", __func__,
client->irq);
ret = request_threaded_irq(client->irq, sec_ts_isr, sec_ts_irq_thread,
ts->plat_data->irq_type, SEC_TS_NAME, ts);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: Unable to request threaded irq\n", __func__);
goto err_heatmap;
}
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
ts->offload.caps.touch_offload_major_version = 1;
ts->offload.caps.touch_offload_minor_version = 0;
/* ID equivalent to the 4-byte, little-endian string: '00r3' */
ts->offload.caps.device_id =
'3' << 24 | 'r' << 16 | '0' << 8 | '0' << 0;
ts->offload.caps.display_width = ts->plat_data->max_x + 1;
ts->offload.caps.display_height = ts->plat_data->max_y + 1;
ts->offload.caps.tx_size = ts->tx_count;
ts->offload.caps.rx_size = ts->rx_count;
ts->offload.caps.heatmap_size = HEATMAP_SIZE_FULL;
#ifdef I2C_INTERFACE
ts->offload.caps.bus_type = BUS_TYPE_I2C;
ts->offload.caps.bus_speed_hz = 1000000;
#else
ts->offload.caps.bus_type = BUS_TYPE_SPI;
ts->offload.caps.bus_speed_hz = client->max_speed_hz;
#endif
/* Currently can only reliably read mutual and self strength heatmaps
* each frame. Cannot support other formats due to penalties associated
* with switching data types.
*/
ts->offload.caps.touch_data_types =
TOUCH_DATA_TYPE_COORD | TOUCH_DATA_TYPE_STRENGTH;
ts->offload.caps.touch_scan_types =
TOUCH_SCAN_TYPE_MUTUAL | TOUCH_SCAN_TYPE_SELF;
ts->offload.caps.continuous_reporting = true;
ts->offload.caps.noise_reporting = false;
ts->offload.caps.cancel_reporting = false;
ts->offload.caps.size_reporting = true;
ts->offload.caps.filter_grip = true;
ts->offload.caps.filter_palm = true;
ts->offload.caps.num_sensitivity_settings = 1;
ts->offload.hcallback = (void *)ts;
ts->offload.report_cb = sec_ts_offload_report;
touch_offload_init(&ts->offload);
#endif
ts->notifier = sec_ts_screen_nb;
ret = drm_panel_notifier_register(pdata->panel, &ts->notifier);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: drm_panel_notifier_register failed. ret = 0x%08X\n",
__func__, ret);
goto err_register_drm_client;
}
#ifndef CONFIG_SEC_SYSFS
sec_class = class_create(THIS_MODULE, "sec");
#endif
device_init_wakeup(&client->dev, true);
if (ts->is_fw_corrupted == false)
sec_ts_device_init(ts);
#ifdef SEC_TS_FW_UPDATE_ON_PROBE
schedule_work(&ts->fw_update_work);
/* Do not finish probe without checking and flashing the firmware */
flush_work(&ts->fw_update_work);
#else
queue_delayed_work(ts->fw_update_wq, &ts->fw_update_work,
msecs_to_jiffies(SEC_TS_FW_UPDATE_DELAY_MS_AFTER_PROBE));
#endif
#if defined(CONFIG_TOUCHSCREEN_DUMP_MODE)
dump_callbacks.inform_dump = dump_tsp_log;
INIT_DELAYED_WORK(&ts->ghost_check, sec_ts_check_rawdata);
p_ghost_check = &ts->ghost_check;
#endif
ts_dup = ts;
ts->probe_done = true;
ts->wlc_online = false;
ts->usb_present = false;
ts->charger_mode = SEC_TS_BIT_CHARGER_MODE_NO;
ts->wireless_psy = power_supply_get_by_name("wireless");
ts->usb_psy = power_supply_get_by_name("usb");
ts->psy_nb = sec_ts_psy_nb;
ret = power_supply_reg_notifier(&ts->psy_nb);
if (ret < 0)
input_err(true, &ts->client->dev, "psy notifier register failed\n");
input_info(true, &ts->client->dev, "%s: done\n", __func__);
input_log_fix();
return 0;
/* need to be enabled when new goto statement is added */
/*
* sec_ts_fn_remove(ts);
* free_irq(client->irq, ts);
**/
err_register_drm_client:
free_irq(client->irq, ts);
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
touch_offload_cleanup(&ts->offload);
#endif
err_heatmap:
#if IS_ENABLED(CONFIG_TOUCHSCREEN_HEATMAP)
heatmap_remove(&ts->v4l2);
err_irq:
#endif
pm_qos_remove_request(&ts->pm_qos_req);
if (ts->plat_data->support_dex) {
input_unregister_device(ts->input_dev_pad);
ts->input_dev_pad = NULL;
}
err_input_pad_register_device:
input_unregister_device(ts->input_dev);
ts->input_dev = NULL;
ts->input_dev_touch = NULL;
err_input_register_device:
kfree(ts->gainTable);
err_allocate_gaintable:
kfree(ts->pFrame);
err_allocate_frame:
err_init:
sec_ts_power(ts, false);
if (ts->plat_data->support_dex) {
if (ts->input_dev_pad)
input_free_device(ts->input_dev_pad);
}
err_allocate_input_dev_pad:
if (ts->input_dev)
input_free_device(ts->input_dev);
err_allocate_input_dev:
#if IS_ENABLED(CONFIG_TOUCHSCREEN_TBN)
tbn_cleanup(ts->tbn);
err_init_tbn:
#endif
#ifndef SEC_TS_FW_UPDATE_ON_PROBE
if (ts->fw_update_wq)
destroy_workqueue(ts->fw_update_wq);
error_alloc_fw_update_wq:
#endif
if (ts->event_wq)
destroy_workqueue(ts->event_wq);
error_alloc_workqueue:
kfree(ts);
error_allocate_mem:
if (gpio_is_valid(pdata->irq_gpio))
gpio_free(pdata->irq_gpio);
if (gpio_is_valid(pdata->tsp_id))
gpio_free(pdata->tsp_id);
if (gpio_is_valid(pdata->tsp_icid))
gpio_free(pdata->tsp_icid);
if (gpio_is_valid(pdata->switch_gpio))
gpio_free(pdata->switch_gpio);
if (gpio_is_valid(pdata->reset_gpio))
gpio_free(pdata->reset_gpio);
error_allocate_pdata:
if (ret == -ECONNREFUSED)
sec_ts_delay(100);
if (ret != -EPROBE_DEFER)
ret = -ENODEV;
#ifdef CONFIG_TOUCHSCREEN_DUMP_MODE
p_ghost_check = NULL;
#endif
ts_dup = NULL;
input_err(true, &client->dev, "%s: failed(%d)\n", __func__, ret);
input_log_fix();
return ret;
}
void sec_ts_unlocked_release_all_finger(struct sec_ts_data *ts)
{
int i;
for (i = 0; i < MAX_SUPPORT_TOUCH_COUNT; i++) {
input_mt_slot(ts->input_dev, i);
if (ts->plat_data->support_mt_pressure)
input_report_abs(ts->input_dev, ABS_MT_PRESSURE, 0);
input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER,
false);
if ((ts->coord[i].action == SEC_TS_COORDINATE_ACTION_PRESS) ||
(ts->coord[i].action ==
SEC_TS_COORDINATE_ACTION_MOVE)) {
input_info(true, &ts->client->dev,
"%s: [RA] tID:%d mc:%d tc:%d v:%02X%02X cal:%02X(%02X) id(%d,%d) p:%d\n",
__func__, i,
ts->coord[i].mcount, ts->touch_count,
ts->plat_data->img_version_of_ic[2],
ts->plat_data->img_version_of_ic[3],
ts->cal_status, ts->nv, ts->tspid_val,
ts->tspicid_val, ts->coord[i].palm_count);
do_gettimeofday(&ts->time_released[i]);
if (ts->time_longest <
(ts->time_released[i].tv_sec -
ts->time_pressed[i].tv_sec))
ts->time_longest =
(ts->time_released[i].tv_sec -
ts->time_pressed[i].tv_sec);
}
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
ts->offload.coords[i].status = COORD_STATUS_INACTIVE;
ts->offload.coords[i].major = 0;
ts->offload.coords[i].minor = 0;
ts->offload.coords[i].pressure = 0;
#endif
ts->coord[i].action = SEC_TS_COORDINATE_ACTION_RELEASE;
ts->coord[i].mcount = 0;
ts->coord[i].palm_count = 0;
}
input_mt_slot(ts->input_dev, 0);
input_report_key(ts->input_dev, BTN_TOUCH, false);
input_report_key(ts->input_dev, BTN_TOOL_FINGER, false);
#ifdef SW_GLOVE
input_report_switch(ts->input_dev, SW_GLOVE, false);
#endif
ts->touchkey_glove_mode_status = false;
ts->touch_count = 0;
ts->check_multi = 0;
ts->tid_palm_state = 0;
ts->tid_grip_state = 0;
ts->tid_touch_state = 0;
ts->palms_leaved_once = false;
ts->grips_leaved_once = false;
#ifdef KEY_SIDE_GESTURE
if (ts->plat_data->support_sidegesture) {
input_report_key(ts->input_dev, KEY_SIDE_GESTURE, 0);
input_report_key(ts->input_dev, KEY_SIDE_GESTURE_LEFT, 0);
input_report_key(ts->input_dev, KEY_SIDE_GESTURE_RIGHT, 0);
}
#endif
input_report_key(ts->input_dev, KEY_HOMEPAGE, 0);
input_sync(ts->input_dev);
}
void sec_ts_locked_release_all_finger(struct sec_ts_data *ts)
{
mutex_lock(&ts->eventlock);
sec_ts_unlocked_release_all_finger(ts);
mutex_unlock(&ts->eventlock);
}
#ifdef USE_POWER_RESET_WORK
static void sec_ts_reset_work(struct work_struct *work)
{
struct sec_ts_data *ts = container_of(work, struct sec_ts_data,
reset_work.work);
ts->reset_is_on_going = true;
input_info(true, &ts->client->dev, "%s\n", __func__);
sec_ts_set_bus_ref(ts, SEC_TS_BUS_REF_RESET, true);
sec_ts_stop_device(ts);
sec_ts_delay(30);
sec_ts_start_device(ts);
if (ts->input_dev_touch->disabled) {
input_err(true, &ts->client->dev,
"%s: call input_close\n", __func__);
sec_ts_input_close(ts->input_dev);
if ((ts->lowpower_mode & SEC_TS_MODE_CUSTOMLIB_AOD) &&
ts->use_customlib) {
int i, ret;
u8 data[10] = {0x02, 0};
for (i = 0; i < 4; i++) {
data[i * 2 + 2] = ts->rect_data[i] & 0xFF;
data[i * 2 + 3] =
(ts->rect_data[i] >> 8) & 0xFF;
}
disable_irq(ts->client->irq);
ret = ts->sec_ts_write(ts,
SEC_TS_CMD_CUSTOMLIB_WRITE_PARAM, &data[0], 10);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: Failed to write offset\n",
__func__);
ret = ts->sec_ts_write(ts,
SEC_TS_CMD_CUSTOMLIB_NOTIFY_PACKET, NULL, 0);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: Failed to send notify\n",
__func__);
enable_irq(ts->client->irq);
}
}
ts->reset_is_on_going = false;
sec_ts_set_bus_ref(ts, SEC_TS_BUS_REF_RESET, false);
}
#endif
void sec_ts_read_init_info(struct sec_ts_data *ts)
{
#ifndef CONFIG_SEC_FACTORY
struct sec_ts_test_mode mode;
char para = TO_TOUCH_MODE;
#endif
#ifdef USE_PRESSURE_SENSOR
unsigned char data[18] = { 0 };
#endif
int ret;
ts->nv = get_tsp_nvm_data(ts, SEC_TS_NVM_OFFSET_FAC_RESULT);
ts->cal_count = get_tsp_nvm_data(ts, SEC_TS_NVM_OFFSET_CAL_COUNT);
ts->pressure_cal_base = get_tsp_nvm_data(ts,
SEC_TS_NVM_OFFSET_PRESSURE_BASE_CAL_COUNT);
ts->pressure_cal_delta = get_tsp_nvm_data(ts,
SEC_TS_NVM_OFFSET_PRESSURE_DELTA_CAL_COUNT);
input_info(true, &ts->client->dev,
"%s: fac_nv:%02X, cal_count:%02X\n",
__func__, ts->nv, ts->cal_count);
#ifdef PAT_CONTROL
ts->tune_fix_ver = (get_tsp_nvm_data(ts,
SEC_TS_NVM_OFFSET_TUNE_VERSION) << 8) |
get_tsp_nvm_data(ts,
SEC_TS_NVM_OFFSET_TUNE_VERSION + 1);
input_info(true, &ts->client->dev,
"%s: tune_fix_ver [%04X]\n", __func__, ts->tune_fix_ver);
#endif
#ifdef USE_PRESSURE_SENSOR
ret = ts->sec_ts_read(ts, SEC_TS_CMD_SET_GET_PRESSURE, data, 18);
if (ret < 0)
return;
ts->pressure_left = ((data[16] << 8) | data[17]);
ts->pressure_center = ((data[8] << 8) | data[9]);
ts->pressure_right = ((data[0] << 8) | data[1]);
input_info(true, &ts->client->dev,
"%s: left: %d, center: %d, right: %d\n", __func__,
ts->pressure_left, ts->pressure_center, ts->pressure_right);
#endif
#ifndef CONFIG_SEC_FACTORY
/* run self-test */
disable_irq(ts->client->irq);
execute_selftest(ts,
TEST_OPEN | TEST_NODE_VARIANCE |
TEST_SHORT | TEST_SELF_NODE | TEST_NOT_SAVE);
enable_irq(ts->client->irq);
input_info(true, &ts->client->dev, "%s: %02X %02X %02X %02X\n",
__func__, ts->ito_test[0], ts->ito_test[1]
, ts->ito_test[2], ts->ito_test[3]);
ret = ts->sec_ts_write(ts, SEC_TS_CMD_SET_POWER_MODE, &para, 1);
if (ret < 0)
input_err(true, &ts->client->dev, "%s: Failed to set\n",
__func__);
sec_ts_delay(350);
/* run ambient read */
memset(&mode, 0x00, sizeof(struct sec_ts_test_mode));
mode.type = TYPE_AMBIENT_DATA;
mode.allnode = TEST_MODE_ALL_NODE;
sec_ts_read_raw_data(ts, NULL, &mode);
#endif
input_log_fix();
}
static void sec_ts_fw_update_work(struct work_struct *work)
{
#ifdef SEC_TS_FW_UPDATE_ON_PROBE
struct sec_ts_data *ts = container_of(work, struct sec_ts_data,
fw_update_work);
#else
struct delayed_work *fw_update_work = container_of(work,
struct delayed_work, work);
struct sec_ts_data *ts = container_of(fw_update_work,
struct sec_ts_data, fw_update_work);
#endif
int ret;
input_info(true, &ts->client->dev,
"%s: Beginning firmware update after probe.\n", __func__);
sec_ts_set_bus_ref(ts, SEC_TS_BUS_REF_FW_UPDATE, true);
ret = sec_ts_firmware_update_on_probe(ts, false);
if (ret < 0)
input_info(true, &ts->client->dev,
"%s: firmware update was unsuccessful.\n",
__func__);
if (ts->is_fw_corrupted == true && ret == 0) {
ret = sec_ts_fw_init(ts);
if (ret == SEC_TS_ERR_NA) {
ts->is_fw_corrupted = false;
sec_ts_device_init(ts);
} else
input_info(true, &ts->client->dev,
"%s: fail to sec_ts_fw_init 0x%x\n",
__func__, ret);
}
if (ts->is_fw_corrupted == false)
sec_ts_read_init_info(ts);
sec_ts_set_bus_ref(ts, SEC_TS_BUS_REF_FW_UPDATE, false);
}
int sec_ts_set_lowpowermode(struct sec_ts_data *ts, u8 mode)
{
int ret;
int retrycnt = 0;
u8 data;
char para = 0;
input_err(true, &ts->client->dev, "%s: %s(%X)\n", __func__,
mode == TO_LOWPOWER_MODE ? "ENTER" : "EXIT",
ts->lowpower_mode);
if (mode) {
#ifdef SEC_TS_SUPPORT_CUSTOMLIB
if (ts->use_customlib)
sec_ts_set_custom_library(ts);
#endif
data = (ts->lowpower_mode & SEC_TS_MODE_LOWPOWER_FLAG) >> 1;
ret = sec_ts_write(ts, SEC_TS_CMD_WAKEUP_GESTURE_MODE,
&data, 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: Failed to set\n", __func__);
}
retry_pmode:
ret = sec_ts_write(ts, SEC_TS_CMD_SET_POWER_MODE, &mode, 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: failed\n", __func__);
sec_ts_delay(50);
/* read data */
ret = sec_ts_read(ts, SEC_TS_CMD_SET_POWER_MODE, &para, 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: read power mode failed!\n", __func__);
else
input_info(true, &ts->client->dev,
"%s: power mode - write(%d) read(%d)\n",
__func__, mode, para);
if (mode != para) {
retrycnt++;
if (retrycnt < 5)
goto retry_pmode;
}
ret = sec_ts_write(ts, SEC_TS_CMD_CLEAR_EVENT_STACK, NULL, 0);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: write clear event failed\n", __func__);
sec_ts_locked_release_all_finger(ts);
if (device_may_wakeup(&ts->client->dev)) {
if (mode)
enable_irq_wake(ts->client->irq);
else
disable_irq_wake(ts->client->irq);
}
ts->lowpower_status = mode;
input_info(true, &ts->client->dev, "%s: end\n", __func__);
return ret;
}
#ifdef USE_OPEN_CLOSE
static int sec_ts_input_open(struct input_dev *dev)
{
struct sec_ts_data *ts = input_get_drvdata(dev);
int ret;
ts->input_closed = false;
input_info(true, &ts->client->dev, "%s\n", __func__);
sec_ts_set_bus_ref(ts, SEC_TS_BUS_REF_INPUT_DEV, true);
if (ts->lowpower_status) {
#ifdef USE_RESET_EXIT_LPM
schedule_delayed_work(&ts->reset_work,
msecs_to_jiffies(TOUCH_RESET_DWORK_TIME));
#else
sec_ts_set_lowpowermode(ts, TO_TOUCH_MODE);
#endif
ts->power_status = SEC_TS_STATE_POWER_ON;
} else {
ret = sec_ts_start_device(ts);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: Failed to start device\n", __func__);
}
/* because edge and dead zone will recover soon */
sec_ts_set_grip_type(ts, ONLY_EDGE_HANDLER);
sec_ts_set_bus_ref(ts, SEC_TS_BUS_REF_INPUT_DEV, false);
return 0;
}
static void sec_ts_input_close(struct input_dev *dev)
{
struct sec_ts_data *ts = input_get_drvdata(dev);
ts->input_closed = true;
input_info(true, &ts->client->dev, "%s\n", __func__);
sec_ts_set_bus_ref(ts, SEC_TS_BUS_REF_INPUT_DEV, true);
cancel_work_sync(&ts->suspend_work);
cancel_work_sync(&ts->resume_work);
#ifdef USE_POWER_RESET_WORK
cancel_delayed_work(&ts->reset_work);
#endif
#ifndef CONFIG_SEC_FACTORY
ts->lowpower_mode |= SEC_TS_MODE_CUSTOMLIB_FORCE_KEY;
#endif
if (ts->lowpower_mode) {
sec_ts_set_lowpowermode(ts, TO_LOWPOWER_MODE);
ts->power_status = SEC_TS_STATE_LPM;
} else {
sec_ts_stop_device(ts);
}
sec_ts_set_bus_ref(ts, SEC_TS_BUS_REF_INPUT_DEV, false);
}
#endif
#ifdef I2C_INTERFACE
static int sec_ts_remove(struct i2c_client *client)
#else
static int sec_ts_remove(struct spi_device *client)
#endif
{
#ifdef I2C_INTERFACE
struct sec_ts_data *ts = i2c_get_clientdata(client);
#else
struct sec_ts_data *ts = spi_get_drvdata(client);
#endif
const struct sec_ts_plat_data *pdata = ts->plat_data;
input_info(true, &ts->client->dev, "%s\n", __func__);
if (ts_dup == NULL || ts->probe_done == false)
return 0;
/* Force the bus active throughout removal of the client */
sec_ts_set_bus_ref(ts, SEC_TS_BUS_REF_FORCE_ACTIVE, true);
power_supply_unreg_notifier(&ts->psy_nb);
drm_panel_notifier_unregister(pdata->panel, &ts->notifier);
cancel_work_sync(&ts->suspend_work);
cancel_work_sync(&ts->resume_work);
cancel_work_sync(&ts->charger_work);
destroy_workqueue(ts->event_wq);
#ifdef SEC_TS_FW_UPDATE_ON_PROBE
cancel_work_sync(&ts->fw_update_work);
#else
cancel_delayed_work_sync(&ts->fw_update_work);
destroy_workqueue(ts->fw_update_wq);
#endif
disable_irq_nosync(ts->client->irq);
free_irq(ts->client->irq, ts);
input_info(true, &ts->client->dev, "%s: irq disabled\n", __func__);
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
touch_offload_cleanup(&ts->offload);
#endif
#if IS_ENABLED(CONFIG_TOUCHSCREEN_HEATMAP)
heatmap_remove(&ts->v4l2);
#endif
pm_qos_remove_request(&ts->pm_qos_req);
#ifdef USE_POWER_RESET_WORK
cancel_delayed_work_sync(&ts->reset_work);
flush_delayed_work(&ts->reset_work);
input_info(true, &ts->client->dev, "%s: flush queue\n", __func__);
#endif
sec_ts_fn_remove(ts);
#ifdef CONFIG_TOUCHSCREEN_DUMP_MODE
p_ghost_check = NULL;
#endif
device_init_wakeup(&client->dev, false);
ts->lowpower_mode = false;
ts->probe_done = false;
if (ts->plat_data->support_dex) {
input_mt_destroy_slots(ts->input_dev_pad);
input_unregister_device(ts->input_dev_pad);
}
ts->input_dev = ts->input_dev_touch;
input_mt_destroy_slots(ts->input_dev);
input_unregister_device(ts->input_dev);
ts->input_dev_pad = NULL;
ts->input_dev = NULL;
ts->input_dev_touch = NULL;
ts_dup = NULL;
/* need to do software reset for next sec_ts_probe() without error */
ts->sec_ts_write(ts, SEC_TS_CMD_SW_RESET, NULL, 0);
ts->plat_data->power(ts, false);
#if IS_ENABLED(CONFIG_TOUCHSCREEN_TBN)
tbn_cleanup(ts->tbn);
#endif
if (gpio_is_valid(ts->plat_data->irq_gpio))
gpio_free(ts->plat_data->irq_gpio);
if (gpio_is_valid(ts->plat_data->switch_gpio))
gpio_free(ts->plat_data->switch_gpio);
if (gpio_is_valid(ts->plat_data->reset_gpio))
gpio_free(ts->plat_data->reset_gpio);
sec_ts_raw_device_exit(ts);
#ifndef CONFIG_SEC_SYSFS
class_destroy(sec_class);
#endif
#if IS_ENABLED(CONFIG_TOUCHSCREEN_HEATMAP)
kfree(ts->heatmap_buff);
#endif
kfree(ts->gainTable);
kfree(ts->pFrame);
kfree(ts);
return 0;
}
#ifdef I2C_INTERFACE
static void sec_ts_shutdown(struct i2c_client *client)
#else
static void sec_ts_shutdown(struct spi_device *client)
#endif
{
pr_info("%s\n", __func__);
if (ts_dup)
sec_ts_remove(client);
}
int sec_ts_stop_device(struct sec_ts_data *ts)
{
input_info(true, &ts->client->dev, "%s\n", __func__);
mutex_lock(&ts->device_mutex);
if (ts->power_status == SEC_TS_STATE_POWER_OFF) {
input_err(true, &ts->client->dev,
"%s: already power off\n", __func__);
goto out;
}
ts->power_status = SEC_TS_STATE_POWER_OFF;
disable_irq(ts->client->irq);
sec_ts_locked_release_all_finger(ts);
ts->plat_data->power(ts, false);
if (ts->plat_data->enable_sync)
ts->plat_data->enable_sync(false);
sec_ts_pinctrl_configure(ts, false);
out:
mutex_unlock(&ts->device_mutex);
return 0;
}
int sec_ts_start_device(struct sec_ts_data *ts)
{
int ret;
input_info(true, &ts->client->dev, "%s\n", __func__);
sec_ts_pinctrl_configure(ts, true);
mutex_lock(&ts->device_mutex);
if (ts->power_status == SEC_TS_STATE_POWER_ON) {
input_info(true, &ts->client->dev,
"%s: already power on\n", __func__);
goto out;
}
sec_ts_locked_release_all_finger(ts);
ts->plat_data->power(ts, true);
sec_ts_delay(70);
ts->power_status = SEC_TS_STATE_POWER_ON;
sec_ts_wait_for_ready(ts, SEC_TS_ACK_BOOT_COMPLETE);
if (ts->plat_data->enable_sync)
ts->plat_data->enable_sync(true);
if (ts->flip_enable) {
ret = sec_ts_write(ts, SEC_TS_CMD_SET_COVERTYPE,
&ts->cover_cmd, 1);
ts->touch_functions = ts->touch_functions |
SEC_TS_BIT_SETFUNC_COVER;
input_info(true, &ts->client->dev,
"%s: cover cmd write type:%d, mode:%x, ret:%d",
__func__, ts->touch_functions,
ts->cover_cmd, ret);
} else {
ts->touch_functions = (ts->touch_functions &
(~SEC_TS_BIT_SETFUNC_COVER));
input_info(true, &ts->client->dev,
"%s: cover open, not send cmd", __func__);
}
ts->touch_functions = ts->touch_functions |
SEC_TS_DEFAULT_ENABLE_BIT_SETFUNC;
ret = sec_ts_write(ts, SEC_TS_CMD_SET_TOUCHFUNCTION,
(u8 *)&ts->touch_functions, 2);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: Failed to send touch function command", __func__);
#ifdef SEC_TS_SUPPORT_CUSTOMLIB
if (ts->use_customlib)
sec_ts_set_custom_library(ts);
#endif
sec_ts_set_grip_type(ts, ONLY_EDGE_HANDLER);
if (ts->dex_mode) {
input_info(true, &ts->client->dev,
"%s: set dex mode\n", __func__);
ret = ts->sec_ts_write(ts, SEC_TS_CMD_SET_DEX_MODE,
&ts->dex_mode, 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: failed to set dex mode %x\n",
__func__, ts->dex_mode);
}
if (ts->brush_mode) {
input_info(true, &ts->client->dev,
"%s: set brush mode\n", __func__);
ret = ts->sec_ts_write(ts, SEC_TS_CMD_SET_BRUSH_MODE,
&ts->brush_mode, 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: failed to set brush mode\n", __func__);
}
if (ts->touchable_area) {
input_info(true, &ts->client->dev,
"%s: set 16:9 mode\n", __func__);
ret = ts->sec_ts_write(ts, SEC_TS_CMD_SET_TOUCHABLE_AREA,
&ts->touchable_area, 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: failed to set 16:9 mode\n", __func__);
}
/* Sense_on */
ret = sec_ts_write(ts, SEC_TS_CMD_SENSE_ON, NULL, 0);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: fail to write Sense_on\n", __func__);
enable_irq(ts->client->irq);
out:
mutex_unlock(&ts->device_mutex);
return 0;
}
#ifdef CONFIG_PM
static int sec_ts_pm_suspend(struct device *dev)
{
struct sec_ts_data *ts = dev_get_drvdata(dev);
if (ts->bus_refmask)
input_info(true, &ts->client->dev,
"%s: bus_refmask 0x%X\n", __func__, ts->bus_refmask);
if (ts->power_status != SEC_TS_STATE_SUSPEND) {
input_err(true, &ts->client->dev,
"%s: can't suspend because touch bus is in use!\n",
__func__);
return -EBUSY;
}
if (ts->lowpower_mode)
reinit_completion(&ts->resume_done);
return 0;
}
static int sec_ts_pm_resume(struct device *dev)
{
struct sec_ts_data *ts = dev_get_drvdata(dev);
if (ts->lowpower_mode)
complete_all(&ts->resume_done);
return 0;
}
#endif
static const struct i2c_device_id sec_ts_id[] = {
{ SEC_TS_NAME, 0 },
{ },
};
#ifdef CONFIG_PM
static const struct dev_pm_ops sec_ts_dev_pm_ops = {
.suspend = sec_ts_pm_suspend,
.resume = sec_ts_pm_resume,
};
#endif
/*
* Configure the switch GPIO to toggle bus master between AP and SLPI.
* gpio_value takes one of
* { SEC_SWITCH_GPIO_VALUE_SLPI_MASTER, SEC_SWITCH_GPIO_VALUE_AP_MASTER }
*/
static void sec_set_switch_gpio(struct sec_ts_data *ts, int gpio_value)
{
int retval;
unsigned int gpio = ts->plat_data->switch_gpio;
if (!gpio_is_valid(gpio))
return;
input_info(true, &ts->client->dev, "%s: toggling switch to %s\n",
__func__, gpio_value == SEC_SWITCH_GPIO_VALUE_AP_MASTER ?
"AP" : "SLPI");
retval = gpio_direction_output(gpio, gpio_value);
if (retval < 0)
input_err(true, &ts->client->dev,
"%s: Failed to toggle switch_gpio, err = %d\n",
__func__, retval);
}
static void sec_ts_suspend_work(struct work_struct *work)
{
struct sec_ts_data *ts = container_of(work, struct sec_ts_data,
suspend_work);
int ret = 0;
input_info(true, &ts->client->dev, "%s\n", __func__);
mutex_lock(&ts->device_mutex);
reinit_completion(&ts->bus_resumed);
if (ts->power_status == SEC_TS_STATE_SUSPEND) {
input_err(true, &ts->client->dev, "%s: already suspended.\n",
__func__);
mutex_unlock(&ts->device_mutex);
return;
}
pm_stay_awake(&ts->client->dev);
/* Stop T-IC */
sec_ts_fix_tmode(ts, TOUCH_SYSTEM_MODE_SLEEP, TOUCH_MODE_STATE_STOP);
ret = sec_ts_write(ts, SEC_TS_CMD_CLEAR_EVENT_STACK, NULL, 0);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: write clear event failed\n", __func__);
disable_irq_nosync(ts->client->irq);
sec_ts_locked_release_all_finger(ts);
if (ts->plat_data->enable_sync)
ts->plat_data->enable_sync(false);
ts->power_status = SEC_TS_STATE_SUSPEND;
sec_ts_pinctrl_configure(ts, false);
sec_set_switch_gpio(ts, SEC_SWITCH_GPIO_VALUE_SLPI_MASTER);
#if IS_ENABLED(CONFIG_TOUCHSCREEN_TBN)
if (ts->tbn)
tbn_release_bus(ts->tbn);
#endif
pm_relax(&ts->client->dev);
mutex_unlock(&ts->device_mutex);
}
static void sec_ts_resume_work(struct work_struct *work)
{
struct sec_ts_data *ts = container_of(work, struct sec_ts_data,
resume_work);
int ret = 0;
input_info(true, &ts->client->dev, "%s\n", __func__);
mutex_lock(&ts->device_mutex);
#if IS_ENABLED(CONFIG_TOUCHSCREEN_TBN)
if (ts->tbn)
tbn_request_bus(ts->tbn);
#endif
sec_set_switch_gpio(ts, SEC_SWITCH_GPIO_VALUE_AP_MASTER);
sec_ts_pinctrl_configure(ts, true);
if (ts->power_status == SEC_TS_STATE_POWER_ON) {
input_err(true, &ts->client->dev, "%s: already resumed.\n",
__func__);
mutex_unlock(&ts->device_mutex);
return;
}
sec_ts_locked_release_all_finger(ts);
ts->power_status = SEC_TS_STATE_POWER_ON;
ret = sec_ts_system_reset(ts);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: reset failed! ret %d\n", __func__, ret);
if (ts->plat_data->enable_sync)
ts->plat_data->enable_sync(true);
ts->touch_functions =
ts->touch_functions | SEC_TS_DEFAULT_ENABLE_BIT_SETFUNC;
ret = sec_ts_write(ts, SEC_TS_CMD_SET_TOUCHFUNCTION,
(u8 *)&ts->touch_functions, 2);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: Failed to send touch function command.",
__func__);
#ifdef SEC_TS_SUPPORT_CUSTOMLIB
if (ts->use_customlib)
sec_ts_set_custom_library(ts);
#endif
sec_ts_set_grip_type(ts, ONLY_EDGE_HANDLER);
if (ts->dex_mode) {
input_info(true, &ts->client->dev, "%s: set dex mode.\n",
__func__);
ret = ts->sec_ts_write(ts, SEC_TS_CMD_SET_DEX_MODE,
&ts->dex_mode, 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: failed to set dex mode %x.\n", __func__,
ts->dex_mode);
}
if (ts->brush_mode) {
input_info(true, &ts->client->dev, "%s: set brush mode.\n",
__func__);
ret = ts->sec_ts_write(ts, SEC_TS_CMD_SET_BRUSH_MODE,
&ts->brush_mode, 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: failed to set brush mode.\n", __func__);
}
if (ts->touchable_area) {
input_info(true, &ts->client->dev, "%s: set 16:9 mode.\n",
__func__);
ret = ts->sec_ts_write(ts, SEC_TS_CMD_SET_TOUCHABLE_AREA,
&ts->touchable_area, 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: failed to set 16:9 mode.\n", __func__);
}
/* set charger mode */
ret = ts->sec_ts_write(ts, SET_TS_CMD_SET_CHARGER_MODE,
&ts->charger_mode, 1);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: write reg %#x %#x failed, returned %i\n",
__func__, SET_TS_CMD_SET_CHARGER_MODE, ts->charger_mode,
ret);
else
input_info(true, &ts->client->dev, "%s: set charger mode %#x\n",
__func__, ts->charger_mode);
queue_work(ts->event_wq, &ts->charger_work);
/* Sense_on */
ret = sec_ts_write(ts, SEC_TS_CMD_SENSE_ON, NULL, 0);
if (ret < 0)
input_err(true, &ts->client->dev,
"%s: failed to write Sense_on.\n", __func__);
#if IS_ENABLED(CONFIG_TOUCHSCREEN_OFFLOAD)
/* Set touch_offload configuration */
if (ts->offload.offload_running) {
input_info(true, &ts->client->dev,
"applying touch_offload settings.\n");
if (!ts->offload.config.filter_grip)
sec_ts_enable_grip(ts, false);
}
#endif
enable_irq(ts->client->irq);
complete_all(&ts->bus_resumed);
mutex_unlock(&ts->device_mutex);
}
static void sec_ts_charger_work(struct work_struct *work)
{
int ret;
union power_supply_propval prop = {0,};
struct sec_ts_data *ts = container_of(work, struct sec_ts_data,
charger_work);
u8 charger_mode = SEC_TS_BIT_CHARGER_MODE_NO;
bool usb_present = ts->usb_present;
bool wlc_online = ts->wlc_online;
/* usb case */
ret = power_supply_get_property(ts->usb_psy,
POWER_SUPPLY_PROP_PRESENT, &prop);
if (ret == 0) {
usb_present = !!prop.intval;
if (usb_present)
charger_mode = SEC_TS_BIT_CHARGER_MODE_WIRE_CHARGER;
}
/* wlc case */
ret = power_supply_get_property(ts->wireless_psy,
POWER_SUPPLY_PROP_ONLINE, &prop);
if (ret == 0) {
wlc_online = !!prop.intval;
if (wlc_online)
charger_mode = SEC_TS_BIT_CHARGER_MODE_WIRELESS_CHARGER;
}
/* rtx case */
ret = power_supply_get_property(ts->wireless_psy,
POWER_SUPPLY_PROP_RTX, &prop);
if (ret == 0)
pr_debug("%s: RTX %s", __func__,
(!!prop.intval) ? "ON" : "OFF");
if (usb_present == ts->usb_present &&
wlc_online == ts->wlc_online &&
ts->keep_wlc_mode == false)
return;
/* keep wlc mode if usb plug in w/ wlc off case */
if (ts->keep_wlc_mode) {
input_info(true, &ts->client->dev,
"keep wlc mode after usb plug in during wlc online");
charger_mode = SEC_TS_BIT_CHARGER_MODE_WIRELESS_CHARGER;
}
input_info(true, &ts->client->dev,
"%s: keep_wlc_mode %d, USB(%d->%d), WLC(%d->%d), charger_mode(%#x->%#x)",
__func__,
ts->keep_wlc_mode,
ts->usb_present, usb_present,
ts->wlc_online, wlc_online,
ts->charger_mode, charger_mode);
if (ts->charger_mode != charger_mode) {
if (ts->power_status == SEC_TS_STATE_POWER_ON) {
ret = ts->sec_ts_write(ts, SET_TS_CMD_SET_CHARGER_MODE,
&charger_mode, 1);
if (ret < 0) {
input_err(true, &ts->client->dev,
"%s: write reg %#x %#x failed, returned %i\n",
__func__, SET_TS_CMD_SET_CHARGER_MODE,
charger_mode, ret);
return;
}
input_info(true, &ts->client->dev,
"%s: charger_mode change from %#x to %#x\n",
__func__, ts->charger_mode, charger_mode);
} else {
input_info(true, &ts->client->dev,
"%s: ONLY update charger_mode status from %#x to %#x, then will apply during resume\n",
__func__, ts->charger_mode, charger_mode);
}
ts->charger_mode = charger_mode;
}
/* update final charger state */
ts->wlc_online = wlc_online;
ts->usb_present = usb_present;
ts->keep_wlc_mode = false;
}
static void sec_ts_aggregate_bus_state(struct sec_ts_data *ts)
{
input_dbg(true, &ts->client->dev, "%s: bus_refmask = 0x%02X.\n",
__func__, ts->bus_refmask);
/* Complete or cancel any outstanding transitions */
cancel_work_sync(&ts->suspend_work);
cancel_work_sync(&ts->resume_work);
if ((ts->bus_refmask == 0 &&
ts->power_status == SEC_TS_STATE_SUSPEND) ||
(ts->bus_refmask != 0 &&
ts->power_status != SEC_TS_STATE_SUSPEND))
return;
if (ts->bus_refmask == 0)
queue_work(ts->event_wq, &ts->suspend_work);
else
queue_work(ts->event_wq, &ts->resume_work);
}
int sec_ts_set_bus_ref(struct sec_ts_data *ts, u16 ref, bool enable)
{
int result = 0;
mutex_lock(&ts->bus_mutex);
input_dbg(true, &ts->client->dev, "%s: bus_refmask = 0x%02X.\n",
__func__, ref);
if ((enable && (ts->bus_refmask & ref)) ||
(!enable && !(ts->bus_refmask & ref))) {
input_info(true, &ts->client->dev,
"%s: reference is unexpectedly set: mask=0x%04X, ref=0x%04X, enable=%d.\n",
__func__, ts->bus_refmask, ref, enable);
mutex_unlock(&ts->bus_mutex);
return -EINVAL;
}
if (enable) {
/* IRQs can only keep the bus active. IRQs received while the
* bus is transferred to SLPI should be ignored.
*/
if (ref == SEC_TS_BUS_REF_IRQ && ts->bus_refmask == 0)
result = -EAGAIN;
else
ts->bus_refmask |= ref;
} else
ts->bus_refmask &= ~ref;
sec_ts_aggregate_bus_state(ts);
mutex_unlock(&ts->bus_mutex);
/* When triggering a wake, wait up to one second to resume. SCREEN_ON
* and IRQ references do not need to wait.
*/
if (enable &&
ref != SEC_TS_BUS_REF_SCREEN_ON && ref != SEC_TS_BUS_REF_IRQ) {
wait_for_completion_timeout(&ts->bus_resumed, HZ);
if (ts->power_status != SEC_TS_STATE_POWER_ON) {
input_info(true, &ts->client->dev,
"%s: Failed to wake the touch bus.\n",
__func__);
result = -ETIMEDOUT;
}
}
return result;
}
static int sec_ts_screen_state_chg_callback(struct notifier_block *nb,
unsigned long val, void *data)
{
struct sec_ts_data *ts = container_of(nb, struct sec_ts_data,
notifier);
struct drm_panel_notifier *evdata = (struct drm_panel_notifier *)data;
unsigned int blank;
input_dbg(true, &ts->client->dev, "%s: enter.\n", __func__);
if (val != DRM_PANEL_EVENT_BLANK && val != DRM_PANEL_EARLY_EVENT_BLANK)
return NOTIFY_DONE;
if (!ts || !evdata || !evdata->data) {
input_err(true, &ts->client->dev,
"%s: Bad screen state change notifier call.\n",
__func__);
return NOTIFY_DONE;
}
blank = *((unsigned int *)evdata->data);
switch (blank) {
case DRM_PANEL_BLANK_POWERDOWN:
case DRM_PANEL_BLANK_LP:
if (val == DRM_PANEL_EARLY_EVENT_BLANK) {
input_dbg(true, &ts->client->dev,
"%s: DRM_PANEL_BLANK_POWERDOWN.\n", __func__);
sec_ts_set_bus_ref(ts, SEC_TS_BUS_REF_SCREEN_ON, false);
}
break;
case DRM_PANEL_BLANK_UNBLANK:
if (val == DRM_PANEL_EVENT_BLANK) {
input_dbg(true, &ts->client->dev,
"%s: DRM_PANEL_BLANK_UNBLANK.\n", __func__);
sec_ts_set_bus_ref(ts, SEC_TS_BUS_REF_SCREEN_ON, true);
}
break;
}
return NOTIFY_OK;
}
static struct notifier_block sec_ts_screen_nb = {
.notifier_call = sec_ts_screen_state_chg_callback,
};
/*
* power supply callback
*/
static int sec_ts_psy_cb(struct notifier_block *nb,
unsigned long val, void *data)
{
u64 debounce = 500;
struct sec_ts_data *ts = container_of(nb, struct sec_ts_data, psy_nb);
pr_debug("%s: val %lu", __func__, val);
if (val != PSY_EVENT_PROP_CHANGED ||
ts->wireless_psy == NULL ||
ts->usb_psy == NULL ||
(ts->wireless_psy != data && ts->usb_psy != data) ||
ts->ignore_charger_nb == 1)
return NOTIFY_OK;
if (ts->usb_psy == data) {
ts->usb_changed_timestamp = ktime_get();
if (ts->wlc_online) {
input_dbg(true, &ts->client->dev,
"%s: ignore this usb_psy changed during wlc_online!",
__func__);
return NOTIFY_OK;
}
}
if (ts->wireless_psy == data) {
/* keep wlc mode after usb plug in during wlc online */
if (ts->wlc_online == true &&
ts->usb_present == false &&
ktime_before(ktime_get(),
ktime_add_ms(ts->usb_changed_timestamp, debounce)))
ts->keep_wlc_mode = true;
}
if (ts->power_status == SEC_TS_STATE_POWER_ON)
queue_work(ts->event_wq, &ts->charger_work);
return NOTIFY_OK;
}
static struct notifier_block sec_ts_psy_nb = {
.notifier_call = sec_ts_psy_cb,
};
#ifdef CONFIG_OF
static const struct of_device_id sec_ts_match_table[] = {
{ .compatible = "sec,sec_ts",},
{ },
};
#else
#define sec_ts_match_table NULL
#endif
#ifdef I2C_INTERFACE
static struct i2c_driver sec_ts_driver = {
.probe = sec_ts_probe,
.remove = sec_ts_remove,
.shutdown = sec_ts_shutdown,
.id_table = sec_ts_id,
.driver = {
.owner = THIS_MODULE,
.name = SEC_TS_NAME,
#ifdef CONFIG_OF
.of_match_table = sec_ts_match_table,
#endif
#ifdef CONFIG_PM
.pm = &sec_ts_dev_pm_ops,
#endif
},
};
#else
static struct spi_driver sec_ts_driver = {
.probe = sec_ts_probe,
.remove = sec_ts_remove,
.shutdown = sec_ts_shutdown,
.driver = {
.owner = THIS_MODULE,
.name = SEC_TS_NAME,
#ifdef CONFIG_OF
.of_match_table = sec_ts_match_table,
#endif
#ifdef CONFIG_PM
.pm = &sec_ts_dev_pm_ops,
#endif
},
};
#endif
static int __init sec_ts_init(void)
{
#ifdef CONFIG_BATTERY_SAMSUNG
if (lpcharge == 1) {
pr_err("%s %s: Do not load driver due to : lpm %d\n",
SECLOG, __func__, lpcharge);
return -ENODEV;
}
#endif
#ifdef I2C_INTERFACE
return i2c_add_driver(&sec_ts_driver);
#else
return spi_register_driver(&sec_ts_driver);
#endif
}
static void __exit sec_ts_exit(void)
{
#ifdef I2C_INTERFACE
i2c_del_driver(&sec_ts_driver);
#else
spi_unregister_driver(&sec_ts_driver);
#endif
}
MODULE_AUTHOR("Hyobae, Ahn<hyobae.ahn@samsung.com>");
MODULE_DESCRIPTION("Samsung Electronics TouchScreen driver");
MODULE_LICENSE("GPL");
module_init(sec_ts_init);
module_exit(sec_ts_exit);