| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/spmi/spmi.h> |
| |
| #define PMK8350_SID 6 |
| |
| #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> |
| |
| &spmi_bus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| |
| qcom,pmk8350@6 { |
| compatible = "qcom,spmi-pmic"; |
| reg = <6 SPMI_USID>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| pmk8350_revid: qcom,revid@100 { |
| compatible = "qcom,qpnp-revid"; |
| reg = <0x100 0x100>; |
| }; |
| |
| pmk8350_vadc: vadc@3100 { |
| compatible = "qcom,spmi-adc7"; |
| reg = <0x3100 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0x6 0x31 0x0 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "eoc-int-en-set"; |
| #io-channel-cells = <1>; |
| io-channel-ranges; |
| |
| /* Channel nodes */ |
| ref_gnd { |
| reg = <PMK8350_ADC7_REF_GND>; |
| label = "ref_gnd"; |
| qcom,pre-scaling = <1 1>; |
| }; |
| |
| vref_1p25 { |
| reg = <PMK8350_ADC7_1P25VREF>; |
| label = "vref_1p25"; |
| qcom,pre-scaling = <1 1>; |
| }; |
| |
| die_temp { |
| reg = <PMK8350_ADC7_DIE_TEMP>; |
| label = "die_temp"; |
| qcom,pre-scaling = <1 1>; |
| }; |
| |
| xo_therm { |
| reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; |
| label = "xo_therm"; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| qcom,pre-scaling = <1 1>; |
| }; |
| }; |
| |
| pmk8350_adc_tm: adc_tm@3400 { |
| compatible = "qcom,adc-tm7"; |
| reg = <0x3400>; |
| interrupts = <0x6 0x34 0x0 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "thr-int-en"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| pmk8350_rtc: rtc@6100 { |
| compatible = "qcom,pmk8350-rtc"; |
| reg = <0x6100>, <0x6200>; |
| reg-names = "rtc", "alarm"; |
| interrupts = <0x6 0x62 0x1 IRQ_TYPE_EDGE_RISING>; |
| }; |
| |
| pmk8350_gpios: pinctrl@b000 { |
| compatible = "qcom,spmi-gpio"; |
| reg = <0xb000 0x400>; |
| interrupts = <0x6 0xb0 0x0 IRQ_TYPE_NONE>, |
| <0x6 0xb1 0x0 IRQ_TYPE_NONE>, |
| <0x6 0xb2 0x0 IRQ_TYPE_NONE>, |
| <0x6 0xb3 0x0 IRQ_TYPE_NONE>; |
| interrupt-names = "pmk8350_gpio1", "pmk8350_gpio2", |
| "pmk8350_gpio3", "pmk8350_gpio4"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| }; |
| }; |