| # |
| # Copyright (C) 2020, Broadcom. |
| # |
| # Unless you and Broadcom execute a separate written software license |
| # agreement governing use of this software, this software is licensed to you |
| # under the terms of the GNU General Public License version 2 (the "GPL"), |
| # available at http://www.broadcom.com/licenses/GPLv2.php, with the |
| # following added to such license: |
| # |
| # As a special exception, the copyright holders of this software give you |
| # permission to link this software with independent modules, and to copy and |
| # distribute the resulting executable under terms of your choice, provided that |
| # you also meet, for each linked independent module, the terms and conditions of |
| # the license of that module. An independent module is a module which is not |
| # derived from this software. The special exception does not apply to any |
| # modifications of the software. |
| # |
| # |
| # <<Broadcom-WL-IPTag/Open:>> |
| # |
| |
| config BCMDHD |
| tristate "Broadcom FullMAC wireless cards support" |
| ---help--- |
| This module adds support for wireless adapters based on |
| Broadcom FullMAC chipset. |
| |
| If you choose to build a module, it'll be called dhd. Say M if |
| unsure. |
| |
| config BCMDHD_SDIO |
| bool "SDIO bus interface support" |
| depends on BCMDHD && MMC |
| |
| config BCMDHD_PCIE |
| bool "PCIe bus interface support" |
| depends on BCMDHD && PCI && !BCMDHD_SDIO |
| |
| config BCM4354 |
| bool "BCM4354 support" |
| depends on BCMDHD |
| default n |
| |
| config BCM4356 |
| bool "BCM4356 support" |
| depends on BCMDHD |
| default n |
| |
| config BCM4358 |
| bool "BCM4358 support" |
| depends on BCMDHD |
| default n |
| |
| config BCM4359 |
| bool "BCM4359 support" |
| depends on BCMDHD |
| default n |
| |
| config BCM4361 |
| bool "BCM4361 support" |
| depends on BCMDHD |
| default n |
| |
| config BCM4362 |
| bool "BCM4362 support" |
| depends on BCMDHD |
| default n |
| |
| config BCM4375 |
| bool "BCM4375 support" |
| depends on BCMDHD |
| default n |
| |
| config BCM43752 |
| bool "BCM43752 support" |
| depends on BCMDHD |
| default n |
| |
| config BCM43014 |
| bool "BCM43014 support" |
| depends on BCMDHD |
| default n |
| |
| config BCM43013 |
| tristate "BCM43013 support" |
| depends on BCMDHD |
| default n |
| |
| config DHD_OF_SUPPORT |
| bool "Use in-drive platform device" |
| depends on BCMDHD |
| default n |
| |
| config BCMDHD_FW_PATH |
| depends on BCMDHD |
| string "Firmware path" |
| default "/system/vendor/etc/wifi/fw_bcmdhd.bin" |
| ---help--- |
| Path to the firmware file. |
| |
| config BCMDHD_NVRAM_PATH |
| depends on BCMDHD |
| string "NVRAM path" |
| default "/system/vendor/etc/wifi/bcmdhd.cal" |
| ---help--- |
| Path to the calibration file. |
| |
| config BCMDHD_CLM_PATH |
| depends on BCMDHD |
| string "CLM path" |
| default "/system/vendor/etc/wifi/bcmdhd_clm.blob" |
| ---help--- |
| Path to the clm file. |
| |
| config BROADCOM_WIFI_RESERVED_MEM |
| bool "BROADCOM Reserved memory for wifi device" |
| depends on BCMDHD |
| ---help--- |
| This is a configuration for Broadcom WLAN driver. |
| |
| config BCMDHD_WEXT |
| bool "Enable WEXT support" |
| depends on BCMDHD && CFG80211 = n |
| select WIRELESS_EXT |
| select WEXT_PRIV |
| help |
| Enables WEXT support |
| |
| config DHD_USE_STATIC_BUF |
| bool "Enable memory preallocation" |
| depends on BCMDHD |
| default n |
| ---help--- |
| Use memory preallocated in platform |
| |
| config DHD_USE_SCHED_SCAN |
| bool "Use CFG80211 sched scan" |
| depends on BCMDHD && CFG80211 |
| default n |
| ---help--- |
| Use CFG80211 sched scan |
| |
| config DHD_SET_RANDOM_MAC_VAL |
| hex "Vendor OUI" |
| depends on BCMDHD |
| default 0x001A11 |
| ---help--- |
| Set vendor OUI for SoftAP |
| |
| config WLAN_REGION_CODE |
| int "---Region codes for Broadcom WiFi Driver" |
| depends on BCMDHD |
| default 100 |
| ---help--- |
| This is a region code for Broadcom Wi-Fi featured functions. |
| - 100 : EUR OPEN |
| - 101 : EUR ORG |
| - 200 : KOR OPEN |
| - 201 : KOR SKT |
| - 202 : KOR KTT |
| - 203 : KOR LGT |
| - 300 : CHN OPEN |
| |
| config WLAIBSS |
| bool "Advanced IBSS mode" |
| depends on (BCM4335 || BCM4339 || BCM4354 || BCM4358 || BCM4359 || BCM4361 || BCM4362) |
| default y |
| ---help--- |
| This is a configuration for Oxygen Network. |
| |
| config WL_RELMCAST |
| bool "Reliable Multicast Support" |
| depends on (BCM4335 || BCM4339 || BCM4354 || BCM4358 || BCM4359 || BCM4361 || BCM4362) |
| default y |
| ---help--- |
| This is a configuration for RMC. |
| |
| config WL_NAN |
| bool "NAN Feature" |
| depends on BCMDHD |
| default n |
| ---help--- |
| This is a configuration for NAN Feature. |
| |
| config BCMDHD_PREALLOC_PKTIDMAP |
| bool "BROADCOM PCIE specific memory reserved for PKTIDMAP" |
| depends on BROADCOM_WIFI_RESERVED_MEM && BCMDHD_PCIE |
| ---help--- |
| Preallocated memory support for PCIE interface in Broadcom |
| WLAN driver. |
| |
| config BCMDHD_PREALLOC_MEMDUMP |
| bool "BROADCOM PCIE specific memory reserved for MEMDUMP" |
| depends on BROADCOM_WIFI_RESERVED_MEM |
| ---help--- |
| Preallocated memory support for dongle memory dump |
| |
| config BCMDHD_OOB_HOST_WAKE |
| bool "Use the external WLAN_HOST_WAKE pin" |
| depends on BCMDHD |
| ---help--- |
| Use the external GPIO pin to wake up host |
| |
| config BCMDHD_GET_OOB_STATE |
| bool "Support WLAN_HOST_WAKE pin level information" |
| depends on BCMDHD_OOB_HOST_WAKE |
| default y |
| ---help--- |
| Support WLAN_HOST_WAKE pin level information |
| |
| config BCMDHD_HTPUT |
| bool "Enable High wlan tput tunables" |
| depends on BCMDHD |
| default n |
| ---help--- |
| Use wlan high tput tunables |
