blob: c13756fa0f55a6dd345c7a5ca6aeea172aafddbc [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
*/
/dts-v1/;
#include "am5718.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "dra7-mmc-iodelay.dtsi"
#include "dra72x-mmc-iodelay.dtsi"
#include "am57xx-idk-common.dtsi"
/ {
model = "TI AM5718 IDK";
compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7";
memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x40000000>;
};
leds {
compatible = "gpio-leds";
cpu0-led {
label = "status0:red:cpu0";
gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "cpu0";
};
usr0-led {
label = "status0:green:usr";
gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
heartbeat-led {
label = "status0:blue:heartbeat";
gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "heartbeat";
};
usr1-led {
label = "status1:red:usr";
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
usr2-led {
label = "status1:green:usr";
gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
mmc0-led {
label = "status1:blue:mmc0";
gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "mmc0";
};
};
idk-leds {
status = "disabled";
compatible = "gpio-leds";
red0-led {
label = "idk:red0";
gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
green0-led {
label = "idk:green0";
gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
blue0-led {
label = "idk:blue0";
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
red1-led {
label = "idk:red1";
gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
green1-led {
label = "idk:green1";
gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
blue1-led {
label = "idk:blue1";
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
red2-led {
label = "idk:red2";
gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
green2-led {
label = "idk:green2";
gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
blue2-led {
label = "idk:blue2";
gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
red3-led {
label = "idk:red3";
gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
green3-led {
label = "idk:green3";
gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
blue3-led {
label = "idk:blue3";
gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
};
&extcon_usb2 {
id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
};
&sn65hvs882 {
load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
};
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
status = "okay";
};
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
status = "okay";
};
};
&mailbox6 {
status = "okay";
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
status = "okay";
};
};
&pcie1_rc {
status = "okay";
gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
};
&mmc1 {
pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
pinctrl-1 = <&mmc1_pins_hs>;
};
&mmc2 {
pinctrl-names = "default", "hs", "ddr_3_3v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
};
&mac_sw {
pinctrl-names = "default", "sleep";
status = "okay";
};
&cpsw_port1 {
phy-handle = <&ethphy0_sw>;
phy-mode = "rgmii-rxid";
ti,dual-emac-pvid = <1>;
};
&cpsw_port2 {
phy-handle = <&ethphy1_sw>;
phy-mode = "rgmii-rxid";
ti,dual-emac-pvid = <2>;
};
&davinci_mdio_sw {
ethphy0_sw: ethernet-phy@0 {
reg = <0>;
};
ethphy1_sw: ethernet-phy@1 {
reg = <1>;
};
};