|  | /* | 
|  | * tps65910.c  --  TI TPS6591x | 
|  | * | 
|  | * Copyright 2010 Texas Instruments Inc. | 
|  | * | 
|  | * Author: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> | 
|  | * | 
|  | *  This program is free software; you can redistribute it and/or modify it | 
|  | *  under  the terms of the GNU General  Public License as published by the | 
|  | *  Free Software Foundation;  either version 2 of the License, or (at your | 
|  | *  option) any later version. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/debugfs.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/mfd/tps65910.h> | 
|  |  | 
|  | #define COMP					0 | 
|  | #define COMP1					1 | 
|  | #define COMP2					2 | 
|  |  | 
|  | /* Comparator 1 voltage selection table in millivolts */ | 
|  | static const u16 COMP_VSEL_TABLE[] = { | 
|  | 0, 2500, 2500, 2500, 2500, 2550, 2600, 2650, | 
|  | 2700, 2750, 2800, 2850, 2900, 2950, 3000, 3050, | 
|  | 3100, 3150, 3200, 3250, 3300, 3350, 3400, 3450, | 
|  | 3500, | 
|  | }; | 
|  |  | 
|  | struct comparator { | 
|  | const char *name; | 
|  | int reg; | 
|  | int uV_max; | 
|  | const u16 *vsel_table; | 
|  | }; | 
|  |  | 
|  | static struct comparator tps_comparators[] = { | 
|  | { | 
|  | .name = "COMP1", | 
|  | .reg = TPS65911_VMBCH, | 
|  | .uV_max = 3500, | 
|  | .vsel_table = COMP_VSEL_TABLE, | 
|  | }, | 
|  | { | 
|  | .name = "COMP2", | 
|  | .reg = TPS65911_VMBCH2, | 
|  | .uV_max = 3500, | 
|  | .vsel_table = COMP_VSEL_TABLE, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int comp_threshold_set(struct tps65910 *tps65910, int id, int voltage) | 
|  | { | 
|  | struct comparator tps_comp = tps_comparators[id]; | 
|  | int curr_voltage = 0; | 
|  | int ret; | 
|  | u8 index = 0, val; | 
|  |  | 
|  | if (id == COMP) | 
|  | return 0; | 
|  |  | 
|  | while (curr_voltage < tps_comp.uV_max) { | 
|  | curr_voltage = tps_comp.vsel_table[index]; | 
|  | if (curr_voltage >= voltage) | 
|  | break; | 
|  | else if (curr_voltage < voltage) | 
|  | index ++; | 
|  | } | 
|  |  | 
|  | if (curr_voltage > tps_comp.uV_max) | 
|  | return -EINVAL; | 
|  |  | 
|  | val = index << 1; | 
|  | ret = tps65910->write(tps65910, tps_comp.reg, 1, &val); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int comp_threshold_get(struct tps65910 *tps65910, int id) | 
|  | { | 
|  | struct comparator tps_comp = tps_comparators[id]; | 
|  | int ret; | 
|  | u8 val; | 
|  |  | 
|  | if (id == COMP) | 
|  | return 0; | 
|  |  | 
|  | ret = tps65910->read(tps65910, tps_comp.reg, 1, &val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | val >>= 1; | 
|  | return tps_comp.vsel_table[val]; | 
|  | } | 
|  |  | 
|  | static ssize_t comp_threshold_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct tps65910 *tps65910 = dev_get_drvdata(dev->parent); | 
|  | struct attribute comp_attr = attr->attr; | 
|  | int id, uVolt; | 
|  |  | 
|  | if (!strcmp(comp_attr.name, "comp1_threshold")) | 
|  | id = COMP1; | 
|  | else if (!strcmp(comp_attr.name, "comp2_threshold")) | 
|  | id = COMP2; | 
|  | else | 
|  | return -EINVAL; | 
|  |  | 
|  | uVolt = comp_threshold_get(tps65910, id); | 
|  |  | 
|  | return sprintf(buf, "%d\n", uVolt); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(comp1_threshold, S_IRUGO, comp_threshold_show, NULL); | 
|  | static DEVICE_ATTR(comp2_threshold, S_IRUGO, comp_threshold_show, NULL); | 
|  |  | 
|  | static int tps65911_comparator_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent); | 
|  | struct tps65910_board *pdata = dev_get_platdata(tps65910->dev); | 
|  | int ret; | 
|  |  | 
|  | ret = comp_threshold_set(tps65910, COMP1,  pdata->vmbch_threshold); | 
|  | if (ret < 0) { | 
|  | dev_err(&pdev->dev, "cannot set COMP1 threshold\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = comp_threshold_set(tps65910, COMP2, pdata->vmbch2_threshold); | 
|  | if (ret < 0) { | 
|  | dev_err(&pdev->dev, "cannot set COMP2 threshold\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Create sysfs entry */ | 
|  | ret = device_create_file(&pdev->dev, &dev_attr_comp1_threshold); | 
|  | if (ret < 0) | 
|  | dev_err(&pdev->dev, "failed to add COMP1 sysfs file\n"); | 
|  |  | 
|  | ret = device_create_file(&pdev->dev, &dev_attr_comp2_threshold); | 
|  | if (ret < 0) | 
|  | dev_err(&pdev->dev, "failed to add COMP2 sysfs file\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int tps65911_comparator_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct tps65910 *tps65910; | 
|  |  | 
|  | tps65910 = dev_get_drvdata(pdev->dev.parent); | 
|  | device_remove_file(&pdev->dev, &dev_attr_comp2_threshold); | 
|  | device_remove_file(&pdev->dev, &dev_attr_comp1_threshold); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver tps65911_comparator_driver = { | 
|  | .driver = { | 
|  | .name = "tps65911-comparator", | 
|  | }, | 
|  | .probe = tps65911_comparator_probe, | 
|  | .remove = tps65911_comparator_remove, | 
|  | }; | 
|  |  | 
|  | static int __init tps65911_comparator_init(void) | 
|  | { | 
|  | return platform_driver_register(&tps65911_comparator_driver); | 
|  | } | 
|  | subsys_initcall(tps65911_comparator_init); | 
|  |  | 
|  | static void __exit tps65911_comparator_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&tps65911_comparator_driver); | 
|  | } | 
|  | module_exit(tps65911_comparator_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Jorge Eduardo Candelaria <jedu@slimlogic.co.uk>"); | 
|  | MODULE_DESCRIPTION("TPS65911 comparator driver"); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_ALIAS("platform:tps65911-comparator"); |