|  | /* | 
|  | * MFD driver for TWL6040 audio device | 
|  | * | 
|  | * Authors:	Misael Lopez Cruz <misael.lopez@ti.com> | 
|  | *		Jorge Eduardo Candelaria <jorge.candelaria@ti.com> | 
|  | *		Peter Ujfalusi <peter.ujfalusi@ti.com> | 
|  | * | 
|  | * Copyright:	(C) 2011 Texas Instruments, Inc. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
|  | * 02110-1301 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/mfd/core.h> | 
|  | #include <linux/mfd/twl6040.h> | 
|  |  | 
|  | #define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1) | 
|  |  | 
|  | int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg) | 
|  | { | 
|  | int ret; | 
|  | unsigned int val; | 
|  |  | 
|  | mutex_lock(&twl6040->io_mutex); | 
|  | /* Vibra control registers from cache */ | 
|  | if (unlikely(reg == TWL6040_REG_VIBCTLL || | 
|  | reg == TWL6040_REG_VIBCTLR)) { | 
|  | val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)]; | 
|  | } else { | 
|  | ret = regmap_read(twl6040->regmap, reg, &val); | 
|  | if (ret < 0) { | 
|  | mutex_unlock(&twl6040->io_mutex); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | mutex_unlock(&twl6040->io_mutex); | 
|  |  | 
|  | return val; | 
|  | } | 
|  | EXPORT_SYMBOL(twl6040_reg_read); | 
|  |  | 
|  | int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&twl6040->io_mutex); | 
|  | ret = regmap_write(twl6040->regmap, reg, val); | 
|  | /* Cache the vibra control registers */ | 
|  | if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR) | 
|  | twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val; | 
|  | mutex_unlock(&twl6040->io_mutex); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(twl6040_reg_write); | 
|  |  | 
|  | int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&twl6040->io_mutex); | 
|  | ret = regmap_update_bits(twl6040->regmap, reg, mask, mask); | 
|  | mutex_unlock(&twl6040->io_mutex); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(twl6040_set_bits); | 
|  |  | 
|  | int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&twl6040->io_mutex); | 
|  | ret = regmap_update_bits(twl6040->regmap, reg, mask, 0); | 
|  | mutex_unlock(&twl6040->io_mutex); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(twl6040_clear_bits); | 
|  |  | 
|  | /* twl6040 codec manual power-up sequence */ | 
|  | static int twl6040_power_up(struct twl6040 *twl6040) | 
|  | { | 
|  | u8 ldoctl, ncpctl, lppllctl; | 
|  | int ret; | 
|  |  | 
|  | /* enable high-side LDO, reference system and internal oscillator */ | 
|  | ldoctl = TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA; | 
|  | ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); | 
|  | if (ret) | 
|  | return ret; | 
|  | usleep_range(10000, 10500); | 
|  |  | 
|  | /* enable negative charge pump */ | 
|  | ncpctl = TWL6040_NCPENA; | 
|  | ret = twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl); | 
|  | if (ret) | 
|  | goto ncp_err; | 
|  | usleep_range(1000, 1500); | 
|  |  | 
|  | /* enable low-side LDO */ | 
|  | ldoctl |= TWL6040_LSLDOENA; | 
|  | ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); | 
|  | if (ret) | 
|  | goto lsldo_err; | 
|  | usleep_range(1000, 1500); | 
|  |  | 
|  | /* enable low-power PLL */ | 
|  | lppllctl = TWL6040_LPLLENA; | 
|  | ret = twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); | 
|  | if (ret) | 
|  | goto lppll_err; | 
|  | usleep_range(5000, 5500); | 
|  |  | 
|  | /* disable internal oscillator */ | 
|  | ldoctl &= ~TWL6040_OSCENA; | 
|  | ret = twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); | 
|  | if (ret) | 
|  | goto osc_err; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | osc_err: | 
|  | lppllctl &= ~TWL6040_LPLLENA; | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); | 
|  | lppll_err: | 
|  | ldoctl &= ~TWL6040_LSLDOENA; | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); | 
|  | lsldo_err: | 
|  | ncpctl &= ~TWL6040_NCPENA; | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl); | 
|  | ncp_err: | 
|  | ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA); | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* twl6040 manual power-down sequence */ | 
|  | static void twl6040_power_down(struct twl6040 *twl6040) | 
|  | { | 
|  | u8 ncpctl, ldoctl, lppllctl; | 
|  |  | 
|  | ncpctl = twl6040_reg_read(twl6040, TWL6040_REG_NCPCTL); | 
|  | ldoctl = twl6040_reg_read(twl6040, TWL6040_REG_LDOCTL); | 
|  | lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL); | 
|  |  | 
|  | /* enable internal oscillator */ | 
|  | ldoctl |= TWL6040_OSCENA; | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); | 
|  | usleep_range(1000, 1500); | 
|  |  | 
|  | /* disable low-power PLL */ | 
|  | lppllctl &= ~TWL6040_LPLLENA; | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl); | 
|  |  | 
|  | /* disable low-side LDO */ | 
|  | ldoctl &= ~TWL6040_LSLDOENA; | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); | 
|  |  | 
|  | /* disable negative charge pump */ | 
|  | ncpctl &= ~TWL6040_NCPENA; | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_NCPCTL, ncpctl); | 
|  |  | 
|  | /* disable high-side LDO, reference system and internal oscillator */ | 
|  | ldoctl &= ~(TWL6040_HSLDOENA | TWL6040_REFENA | TWL6040_OSCENA); | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_LDOCTL, ldoctl); | 
|  | } | 
|  |  | 
|  | static irqreturn_t twl6040_naudint_handler(int irq, void *data) | 
|  | { | 
|  | struct twl6040 *twl6040 = data; | 
|  | u8 intid, status; | 
|  |  | 
|  | intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID); | 
|  |  | 
|  | if (intid & TWL6040_READYINT) | 
|  | complete(&twl6040->ready); | 
|  |  | 
|  | if (intid & TWL6040_THINT) { | 
|  | status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS); | 
|  | if (status & TWL6040_TSHUTDET) { | 
|  | dev_warn(twl6040->dev, | 
|  | "Thermal shutdown, powering-off"); | 
|  | twl6040_power(twl6040, 0); | 
|  | } else { | 
|  | dev_warn(twl6040->dev, | 
|  | "Leaving thermal shutdown, powering-on"); | 
|  | twl6040_power(twl6040, 1); | 
|  | } | 
|  | } | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int twl6040_power_up_completion(struct twl6040 *twl6040, | 
|  | int naudint) | 
|  | { | 
|  | int time_left; | 
|  | u8 intid; | 
|  |  | 
|  | time_left = wait_for_completion_timeout(&twl6040->ready, | 
|  | msecs_to_jiffies(144)); | 
|  | if (!time_left) { | 
|  | intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID); | 
|  | if (!(intid & TWL6040_READYINT)) { | 
|  | dev_err(twl6040->dev, | 
|  | "timeout waiting for READYINT\n"); | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int twl6040_power(struct twl6040 *twl6040, int on) | 
|  | { | 
|  | int audpwron = twl6040->audpwron; | 
|  | int naudint = twl6040->irq; | 
|  | int ret = 0; | 
|  |  | 
|  | mutex_lock(&twl6040->mutex); | 
|  |  | 
|  | if (on) { | 
|  | /* already powered-up */ | 
|  | if (twl6040->power_count++) | 
|  | goto out; | 
|  |  | 
|  | if (gpio_is_valid(audpwron)) { | 
|  | /* use AUDPWRON line */ | 
|  | gpio_set_value(audpwron, 1); | 
|  | /* wait for power-up completion */ | 
|  | ret = twl6040_power_up_completion(twl6040, naudint); | 
|  | if (ret) { | 
|  | dev_err(twl6040->dev, | 
|  | "automatic power-down failed\n"); | 
|  | twl6040->power_count = 0; | 
|  | goto out; | 
|  | } | 
|  | } else { | 
|  | /* use manual power-up sequence */ | 
|  | ret = twl6040_power_up(twl6040); | 
|  | if (ret) { | 
|  | dev_err(twl6040->dev, | 
|  | "manual power-up failed\n"); | 
|  | twl6040->power_count = 0; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | /* Default PLL configuration after power up */ | 
|  | twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL; | 
|  | twl6040->sysclk = 19200000; | 
|  | twl6040->mclk = 32768; | 
|  | } else { | 
|  | /* already powered-down */ | 
|  | if (!twl6040->power_count) { | 
|  | dev_err(twl6040->dev, | 
|  | "device is already powered-off\n"); | 
|  | ret = -EPERM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (--twl6040->power_count) | 
|  | goto out; | 
|  |  | 
|  | if (gpio_is_valid(audpwron)) { | 
|  | /* use AUDPWRON line */ | 
|  | gpio_set_value(audpwron, 0); | 
|  |  | 
|  | /* power-down sequence latency */ | 
|  | usleep_range(500, 700); | 
|  | } else { | 
|  | /* use manual power-down sequence */ | 
|  | twl6040_power_down(twl6040); | 
|  | } | 
|  | twl6040->sysclk = 0; | 
|  | twl6040->mclk = 0; | 
|  | } | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&twl6040->mutex); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(twl6040_power); | 
|  |  | 
|  | int twl6040_set_pll(struct twl6040 *twl6040, int pll_id, | 
|  | unsigned int freq_in, unsigned int freq_out) | 
|  | { | 
|  | u8 hppllctl, lppllctl; | 
|  | int ret = 0; | 
|  |  | 
|  | mutex_lock(&twl6040->mutex); | 
|  |  | 
|  | hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL); | 
|  | lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL); | 
|  |  | 
|  | /* Force full reconfiguration when switching between PLL */ | 
|  | if (pll_id != twl6040->pll) { | 
|  | twl6040->sysclk = 0; | 
|  | twl6040->mclk = 0; | 
|  | } | 
|  |  | 
|  | switch (pll_id) { | 
|  | case TWL6040_SYSCLK_SEL_LPPLL: | 
|  | /* low-power PLL divider */ | 
|  | /* Change the sysclk configuration only if it has been canged */ | 
|  | if (twl6040->sysclk != freq_out) { | 
|  | switch (freq_out) { | 
|  | case 17640000: | 
|  | lppllctl |= TWL6040_LPLLFIN; | 
|  | break; | 
|  | case 19200000: | 
|  | lppllctl &= ~TWL6040_LPLLFIN; | 
|  | break; | 
|  | default: | 
|  | dev_err(twl6040->dev, | 
|  | "freq_out %d not supported\n", | 
|  | freq_out); | 
|  | ret = -EINVAL; | 
|  | goto pll_out; | 
|  | } | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, | 
|  | lppllctl); | 
|  | } | 
|  |  | 
|  | /* The PLL in use has not been change, we can exit */ | 
|  | if (twl6040->pll == pll_id) | 
|  | break; | 
|  |  | 
|  | switch (freq_in) { | 
|  | case 32768: | 
|  | lppllctl |= TWL6040_LPLLENA; | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, | 
|  | lppllctl); | 
|  | mdelay(5); | 
|  | lppllctl &= ~TWL6040_HPLLSEL; | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, | 
|  | lppllctl); | 
|  | hppllctl &= ~TWL6040_HPLLENA; | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL, | 
|  | hppllctl); | 
|  | break; | 
|  | default: | 
|  | dev_err(twl6040->dev, | 
|  | "freq_in %d not supported\n", freq_in); | 
|  | ret = -EINVAL; | 
|  | goto pll_out; | 
|  | } | 
|  | break; | 
|  | case TWL6040_SYSCLK_SEL_HPPLL: | 
|  | /* high-performance PLL can provide only 19.2 MHz */ | 
|  | if (freq_out != 19200000) { | 
|  | dev_err(twl6040->dev, | 
|  | "freq_out %d not supported\n", freq_out); | 
|  | ret = -EINVAL; | 
|  | goto pll_out; | 
|  | } | 
|  |  | 
|  | if (twl6040->mclk != freq_in) { | 
|  | hppllctl &= ~TWL6040_MCLK_MSK; | 
|  |  | 
|  | switch (freq_in) { | 
|  | case 12000000: | 
|  | /* PLL enabled, active mode */ | 
|  | hppllctl |= TWL6040_MCLK_12000KHZ | | 
|  | TWL6040_HPLLENA; | 
|  | break; | 
|  | case 19200000: | 
|  | /* | 
|  | * PLL disabled | 
|  | * (enable PLL if MCLK jitter quality | 
|  | *  doesn't meet specification) | 
|  | */ | 
|  | hppllctl |= TWL6040_MCLK_19200KHZ; | 
|  | break; | 
|  | case 26000000: | 
|  | /* PLL enabled, active mode */ | 
|  | hppllctl |= TWL6040_MCLK_26000KHZ | | 
|  | TWL6040_HPLLENA; | 
|  | break; | 
|  | case 38400000: | 
|  | /* PLL enabled, active mode */ | 
|  | hppllctl |= TWL6040_MCLK_38400KHZ | | 
|  | TWL6040_HPLLENA; | 
|  | break; | 
|  | default: | 
|  | dev_err(twl6040->dev, | 
|  | "freq_in %d not supported\n", freq_in); | 
|  | ret = -EINVAL; | 
|  | goto pll_out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * enable clock slicer to ensure input waveform is | 
|  | * square | 
|  | */ | 
|  | hppllctl |= TWL6040_HPLLSQRENA; | 
|  |  | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL, | 
|  | hppllctl); | 
|  | usleep_range(500, 700); | 
|  | lppllctl |= TWL6040_HPLLSEL; | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, | 
|  | lppllctl); | 
|  | lppllctl &= ~TWL6040_LPLLENA; | 
|  | twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, | 
|  | lppllctl); | 
|  | } | 
|  | break; | 
|  | default: | 
|  | dev_err(twl6040->dev, "unknown pll id %d\n", pll_id); | 
|  | ret = -EINVAL; | 
|  | goto pll_out; | 
|  | } | 
|  |  | 
|  | twl6040->sysclk = freq_out; | 
|  | twl6040->mclk = freq_in; | 
|  | twl6040->pll = pll_id; | 
|  |  | 
|  | pll_out: | 
|  | mutex_unlock(&twl6040->mutex); | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(twl6040_set_pll); | 
|  |  | 
|  | int twl6040_get_pll(struct twl6040 *twl6040) | 
|  | { | 
|  | if (twl6040->power_count) | 
|  | return twl6040->pll; | 
|  | else | 
|  | return -ENODEV; | 
|  | } | 
|  | EXPORT_SYMBOL(twl6040_get_pll); | 
|  |  | 
|  | unsigned int twl6040_get_sysclk(struct twl6040 *twl6040) | 
|  | { | 
|  | return twl6040->sysclk; | 
|  | } | 
|  | EXPORT_SYMBOL(twl6040_get_sysclk); | 
|  |  | 
|  | /* Get the combined status of the vibra control register */ | 
|  | int twl6040_get_vibralr_status(struct twl6040 *twl6040) | 
|  | { | 
|  | u8 status; | 
|  |  | 
|  | status = twl6040->vibra_ctrl_cache[0] | twl6040->vibra_ctrl_cache[1]; | 
|  | status &= (TWL6040_VIBENA | TWL6040_VIBSEL); | 
|  |  | 
|  | return status; | 
|  | } | 
|  | EXPORT_SYMBOL(twl6040_get_vibralr_status); | 
|  |  | 
|  | static struct resource twl6040_vibra_rsrc[] = { | 
|  | { | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct resource twl6040_codec_rsrc[] = { | 
|  | { | 
|  | .flags = IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static bool twl6040_readable_reg(struct device *dev, unsigned int reg) | 
|  | { | 
|  | /* Register 0 is not readable */ | 
|  | if (!reg) | 
|  | return false; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static struct regmap_config twl6040_regmap_config = { | 
|  | .reg_bits = 8, | 
|  | .val_bits = 8, | 
|  | .max_register = TWL6040_REG_STATUS, /* 0x2e */ | 
|  |  | 
|  | .readable_reg = twl6040_readable_reg, | 
|  | }; | 
|  |  | 
|  | static int __devinit twl6040_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct twl6040_platform_data *pdata = client->dev.platform_data; | 
|  | struct twl6040 *twl6040; | 
|  | struct mfd_cell *cell = NULL; | 
|  | int ret, children = 0; | 
|  |  | 
|  | if (!pdata) { | 
|  | dev_err(&client->dev, "Platform data is missing\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* In order to operate correctly we need valid interrupt config */ | 
|  | if (!client->irq || !pdata->irq_base) { | 
|  | dev_err(&client->dev, "Invalid IRQ configuration\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040), | 
|  | GFP_KERNEL); | 
|  | if (!twl6040) { | 
|  | ret = -ENOMEM; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | twl6040->regmap = regmap_init_i2c(client, &twl6040_regmap_config); | 
|  | if (IS_ERR(twl6040->regmap)) { | 
|  | ret = PTR_ERR(twl6040->regmap); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | i2c_set_clientdata(client, twl6040); | 
|  |  | 
|  | twl6040->dev = &client->dev; | 
|  | twl6040->irq = client->irq; | 
|  | twl6040->irq_base = pdata->irq_base; | 
|  |  | 
|  | mutex_init(&twl6040->mutex); | 
|  | mutex_init(&twl6040->io_mutex); | 
|  | init_completion(&twl6040->ready); | 
|  |  | 
|  | twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV); | 
|  |  | 
|  | /* ERRATA: Automatic power-up is not possible in ES1.0 */ | 
|  | if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0) | 
|  | twl6040->audpwron = pdata->audpwron_gpio; | 
|  | else | 
|  | twl6040->audpwron = -EINVAL; | 
|  |  | 
|  | if (gpio_is_valid(twl6040->audpwron)) { | 
|  | ret = gpio_request_one(twl6040->audpwron, GPIOF_OUT_INIT_LOW, | 
|  | "audpwron"); | 
|  | if (ret) | 
|  | goto gpio1_err; | 
|  | } | 
|  |  | 
|  | /* codec interrupt */ | 
|  | ret = twl6040_irq_init(twl6040); | 
|  | if (ret) | 
|  | goto gpio2_err; | 
|  |  | 
|  | ret = request_threaded_irq(twl6040->irq_base + TWL6040_IRQ_READY, | 
|  | NULL, twl6040_naudint_handler, 0, | 
|  | "twl6040_irq_ready", twl6040); | 
|  | if (ret) { | 
|  | dev_err(twl6040->dev, "READY IRQ request failed: %d\n", | 
|  | ret); | 
|  | goto irq_err; | 
|  | } | 
|  |  | 
|  | /* dual-access registers controlled by I2C only */ | 
|  | twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL); | 
|  |  | 
|  | if (pdata->codec) { | 
|  | int irq = twl6040->irq_base + TWL6040_IRQ_PLUG; | 
|  |  | 
|  | cell = &twl6040->cells[children]; | 
|  | cell->name = "twl6040-codec"; | 
|  | twl6040_codec_rsrc[0].start = irq; | 
|  | twl6040_codec_rsrc[0].end = irq; | 
|  | cell->resources = twl6040_codec_rsrc; | 
|  | cell->num_resources = ARRAY_SIZE(twl6040_codec_rsrc); | 
|  | cell->platform_data = pdata->codec; | 
|  | cell->pdata_size = sizeof(*pdata->codec); | 
|  | children++; | 
|  | } | 
|  |  | 
|  | if (pdata->vibra) { | 
|  | int irq = twl6040->irq_base + TWL6040_IRQ_VIB; | 
|  |  | 
|  | cell = &twl6040->cells[children]; | 
|  | cell->name = "twl6040-vibra"; | 
|  | twl6040_vibra_rsrc[0].start = irq; | 
|  | twl6040_vibra_rsrc[0].end = irq; | 
|  | cell->resources = twl6040_vibra_rsrc; | 
|  | cell->num_resources = ARRAY_SIZE(twl6040_vibra_rsrc); | 
|  |  | 
|  | cell->platform_data = pdata->vibra; | 
|  | cell->pdata_size = sizeof(*pdata->vibra); | 
|  | children++; | 
|  | } | 
|  |  | 
|  | if (children) { | 
|  | ret = mfd_add_devices(&client->dev, -1, twl6040->cells, | 
|  | children, NULL, 0); | 
|  | if (ret) | 
|  | goto mfd_err; | 
|  | } else { | 
|  | dev_err(&client->dev, "No platform data found for children\n"); | 
|  | ret = -ENODEV; | 
|  | goto mfd_err; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | mfd_err: | 
|  | free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040); | 
|  | irq_err: | 
|  | twl6040_irq_exit(twl6040); | 
|  | gpio2_err: | 
|  | if (gpio_is_valid(twl6040->audpwron)) | 
|  | gpio_free(twl6040->audpwron); | 
|  | gpio1_err: | 
|  | i2c_set_clientdata(client, NULL); | 
|  | regmap_exit(twl6040->regmap); | 
|  | err: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __devexit twl6040_remove(struct i2c_client *client) | 
|  | { | 
|  | struct twl6040 *twl6040 = i2c_get_clientdata(client); | 
|  |  | 
|  | if (twl6040->power_count) | 
|  | twl6040_power(twl6040, 0); | 
|  |  | 
|  | if (gpio_is_valid(twl6040->audpwron)) | 
|  | gpio_free(twl6040->audpwron); | 
|  |  | 
|  | free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040); | 
|  | twl6040_irq_exit(twl6040); | 
|  |  | 
|  | mfd_remove_devices(&client->dev); | 
|  | i2c_set_clientdata(client, NULL); | 
|  | regmap_exit(twl6040->regmap); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id twl6040_i2c_id[] = { | 
|  | { "twl6040", 0, }, | 
|  | { }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id); | 
|  |  | 
|  | static struct i2c_driver twl6040_driver = { | 
|  | .driver = { | 
|  | .name = "twl6040", | 
|  | .owner = THIS_MODULE, | 
|  | }, | 
|  | .probe		= twl6040_probe, | 
|  | .remove		= __devexit_p(twl6040_remove), | 
|  | .id_table	= twl6040_i2c_id, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(twl6040_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("TWL6040 MFD"); | 
|  | MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>"); | 
|  | MODULE_AUTHOR("Jorge Eduardo Candelaria <jorge.candelaria@ti.com>"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS("platform:twl6040"); |