|  | /* | 
|  | * Copyright (C) 2007-2011 ST-Ericsson | 
|  | * License terms: GNU General Public License (GPL) version 2 | 
|  | * Low-level core for exclusive access to the AB5500 IC on the I2C bus | 
|  | * and some basic chip-configuration. | 
|  | * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> | 
|  | * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> | 
|  | * Author: Mattias Wallin <mattias.wallin@stericsson.com> | 
|  | * Author: Rickard Andersson <rickard.andersson@stericsson.com> | 
|  | * Author: Karl Komierowski  <karl.komierowski@stericsson.com> | 
|  | * Author: Bibek Basu <bibek.basu@stericsson.com> | 
|  | * | 
|  | * TODO: Event handling with irq_chip. Waiting for PRCMU fw support. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/random.h> | 
|  | #include <linux/mfd/abx500.h> | 
|  | #include <linux/mfd/abx500/ab5500.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/mfd/core.h> | 
|  | #include <linux/mfd/db5500-prcmu.h> | 
|  |  | 
|  | #include "ab5500-core.h" | 
|  | #include "ab5500-debugfs.h" | 
|  |  | 
|  | #define AB5500_NUM_EVENT_REG 23 | 
|  | #define AB5500_IT_LATCH0_REG 0x40 | 
|  | #define AB5500_IT_MASK0_REG 0x60 | 
|  |  | 
|  | /* | 
|  | * Permissible register ranges for reading and writing per device and bank. | 
|  | * | 
|  | * The ranges must be listed in increasing address order, and no overlaps are | 
|  | * allowed. It is assumed that write permission implies read permission | 
|  | * (i.e. only RO and RW permissions should be used).  Ranges with write | 
|  | * permission must not be split up. | 
|  | */ | 
|  |  | 
|  | #define NO_RANGE {.count = 0, .range = NULL,} | 
|  | static struct ab5500_i2c_banks ab5500_bank_ranges[AB5500_NUM_DEVICES] = { | 
|  | [AB5500_DEVID_USB] =  { | 
|  | .nbanks = 1, | 
|  | .bank = (struct ab5500_i2c_ranges []) { | 
|  | { | 
|  | .bankid = AB5500_BANK_USB, | 
|  | .nranges = 12, | 
|  | .range = (struct ab5500_reg_range[]) { | 
|  | { | 
|  | .first = 0x01, | 
|  | .last = 0x01, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x80, | 
|  | .last = 0x83, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x87, | 
|  | .last = 0x8A, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x8B, | 
|  | .last = 0x8B, | 
|  | .perm = AB5500_PERM_RO, | 
|  | }, | 
|  | { | 
|  | .first = 0x91, | 
|  | .last = 0x92, | 
|  | .perm = AB5500_PERM_RO, | 
|  | }, | 
|  | { | 
|  | .first = 0x93, | 
|  | .last = 0x93, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x94, | 
|  | .last = 0x94, | 
|  | .perm = AB5500_PERM_RO, | 
|  | }, | 
|  | { | 
|  | .first = 0xA8, | 
|  | .last = 0xB0, | 
|  | .perm = AB5500_PERM_RO, | 
|  | }, | 
|  | { | 
|  | .first = 0xB2, | 
|  | .last = 0xB2, | 
|  | .perm = AB5500_PERM_RO, | 
|  | }, | 
|  | { | 
|  | .first = 0xB4, | 
|  | .last = 0xBC, | 
|  | .perm = AB5500_PERM_RO, | 
|  | }, | 
|  | { | 
|  | .first = 0xBF, | 
|  | .last = 0xBF, | 
|  | .perm = AB5500_PERM_RO, | 
|  | }, | 
|  | { | 
|  | .first = 0xC1, | 
|  | .last = 0xC5, | 
|  | .perm = AB5500_PERM_RO, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_ADC] =  { | 
|  | .nbanks = 1, | 
|  | .bank = (struct ab5500_i2c_ranges []) { | 
|  | { | 
|  | .bankid = AB5500_BANK_ADC, | 
|  | .nranges = 6, | 
|  | .range = (struct ab5500_reg_range[]) { | 
|  | { | 
|  | .first = 0x1F, | 
|  | .last = 0x22, | 
|  | .perm = AB5500_PERM_RO, | 
|  | }, | 
|  | { | 
|  | .first = 0x23, | 
|  | .last = 0x24, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x26, | 
|  | .last = 0x2D, | 
|  | .perm = AB5500_PERM_RO, | 
|  | }, | 
|  | { | 
|  | .first = 0x2F, | 
|  | .last = 0x34, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x37, | 
|  | .last = 0x57, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x58, | 
|  | .last = 0x58, | 
|  | .perm = AB5500_PERM_RO, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_LEDS] =  { | 
|  | .nbanks = 1, | 
|  | .bank = (struct ab5500_i2c_ranges []) { | 
|  | { | 
|  | .bankid = AB5500_BANK_LED, | 
|  | .nranges = 1, | 
|  | .range = (struct ab5500_reg_range[]) { | 
|  | { | 
|  | .first = 0x00, | 
|  | .last = 0x0C, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_VIDEO] =   { | 
|  | .nbanks = 1, | 
|  | .bank = (struct ab5500_i2c_ranges []) { | 
|  | { | 
|  | .bankid = AB5500_BANK_VDENC, | 
|  | .nranges = 12, | 
|  | .range = (struct ab5500_reg_range[]) { | 
|  | { | 
|  | .first = 0x00, | 
|  | .last = 0x08, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x09, | 
|  | .last = 0x09, | 
|  | .perm = AB5500_PERM_RO, | 
|  | }, | 
|  | { | 
|  | .first = 0x0A, | 
|  | .last = 0x12, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x15, | 
|  | .last = 0x19, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x1B, | 
|  | .last = 0x21, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x27, | 
|  | .last = 0x2C, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x41, | 
|  | .last = 0x41, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x45, | 
|  | .last = 0x5B, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x5D, | 
|  | .last = 0x5D, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x69, | 
|  | .last = 0x69, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x6C, | 
|  | .last = 0x6D, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x80, | 
|  | .last = 0x81, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_REGULATORS] =   { | 
|  | .nbanks = 2, | 
|  | .bank =  (struct ab5500_i2c_ranges []) { | 
|  | { | 
|  | .bankid = AB5500_BANK_STARTUP, | 
|  | .nranges = 12, | 
|  | .range = (struct ab5500_reg_range[]) { | 
|  | { | 
|  | .first = 0x00, | 
|  | .last = 0x01, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x1F, | 
|  | .last = 0x1F, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x2E, | 
|  | .last = 0x2E, | 
|  | .perm = AB5500_PERM_RO, | 
|  | }, | 
|  | { | 
|  | .first = 0x2F, | 
|  | .last = 0x30, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x50, | 
|  | .last = 0x51, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x60, | 
|  | .last = 0x61, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x66, | 
|  | .last = 0x8A, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x8C, | 
|  | .last = 0x96, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0xAA, | 
|  | .last = 0xB4, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0xB7, | 
|  | .last = 0xBF, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0xC1, | 
|  | .last = 0xCA, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0xD3, | 
|  | .last = 0xE0, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | { | 
|  | .bankid = AB5500_BANK_SIM_USBSIM, | 
|  | .nranges = 1, | 
|  | .range = (struct ab5500_reg_range[]) { | 
|  | { | 
|  | .first = 0x13, | 
|  | .last = 0x19, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_SIM] =   { | 
|  | .nbanks = 1, | 
|  | .bank = (struct ab5500_i2c_ranges []) { | 
|  | { | 
|  | .bankid = AB5500_BANK_SIM_USBSIM, | 
|  | .nranges = 1, | 
|  | .range = (struct ab5500_reg_range[]) { | 
|  | { | 
|  | .first = 0x13, | 
|  | .last = 0x19, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_RTC] =   { | 
|  | .nbanks = 1, | 
|  | .bank = (struct ab5500_i2c_ranges []) { | 
|  | { | 
|  | .bankid = AB5500_BANK_RTC, | 
|  | .nranges = 2, | 
|  | .range = (struct ab5500_reg_range[]) { | 
|  | { | 
|  | .first = 0x00, | 
|  | .last = 0x04, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0x06, | 
|  | .last = 0x0C, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_CHARGER] =   { | 
|  | .nbanks = 1, | 
|  | .bank = (struct ab5500_i2c_ranges []) { | 
|  | { | 
|  | .bankid = AB5500_BANK_CHG, | 
|  | .nranges = 2, | 
|  | .range = (struct ab5500_reg_range[]) { | 
|  | { | 
|  | .first = 0x11, | 
|  | .last = 0x11, | 
|  | .perm = AB5500_PERM_RO, | 
|  | }, | 
|  | { | 
|  | .first = 0x12, | 
|  | .last = 0x1B, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_FUELGAUGE] =   { | 
|  | .nbanks = 1, | 
|  | .bank = (struct ab5500_i2c_ranges []) { | 
|  | { | 
|  | .bankid = AB5500_BANK_FG_BATTCOM_ACC, | 
|  | .nranges = 2, | 
|  | .range = (struct ab5500_reg_range[]) { | 
|  | { | 
|  | .first = 0x00, | 
|  | .last = 0x0B, | 
|  | .perm = AB5500_PERM_RO, | 
|  | }, | 
|  | { | 
|  | .first = 0x0C, | 
|  | .last = 0x10, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_VIBRATOR] =   { | 
|  | .nbanks = 1, | 
|  | .bank = (struct ab5500_i2c_ranges []) { | 
|  | { | 
|  | .bankid = AB5500_BANK_VIBRA, | 
|  | .nranges = 2, | 
|  | .range = (struct ab5500_reg_range[]) { | 
|  | { | 
|  | .first = 0x10, | 
|  | .last = 0x13, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0xFE, | 
|  | .last = 0xFE, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_CODEC] =   { | 
|  | .nbanks = 1, | 
|  | .bank = (struct ab5500_i2c_ranges []) { | 
|  | { | 
|  | .bankid = AB5500_BANK_AUDIO_HEADSETUSB, | 
|  | .nranges = 2, | 
|  | .range = (struct ab5500_reg_range[]) { | 
|  | { | 
|  | .first = 0x00, | 
|  | .last = 0x48, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | { | 
|  | .first = 0xEB, | 
|  | .last = 0xFB, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_POWER] = { | 
|  | .nbanks	= 2, | 
|  | .bank	= (struct ab5500_i2c_ranges []) { | 
|  | { | 
|  | .bankid = AB5500_BANK_STARTUP, | 
|  | .nranges = 1, | 
|  | .range = (struct ab5500_reg_range[]) { | 
|  | { | 
|  | .first = 0x30, | 
|  | .last = 0x30, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | { | 
|  | .bankid = AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP, | 
|  | .nranges = 1, | 
|  | .range = (struct ab5500_reg_range[]) { | 
|  | { | 
|  | .first = 0x01, | 
|  | .last = 0x01, | 
|  | .perm = AB5500_PERM_RW, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | #define AB5500_IRQ(bank, bit)	((bank) * 8 + (bit)) | 
|  |  | 
|  | /* I appologize for the resource names beeing a mix of upper case | 
|  | * and lower case but I want them to be exact as the documentation */ | 
|  | static struct mfd_cell ab5500_devs[AB5500_NUM_DEVICES] = { | 
|  | [AB5500_DEVID_LEDS] = { | 
|  | .name = "ab5500-leds", | 
|  | .id = AB5500_DEVID_LEDS, | 
|  | }, | 
|  | [AB5500_DEVID_POWER] = { | 
|  | .name = "ab5500-power", | 
|  | .id = AB5500_DEVID_POWER, | 
|  | }, | 
|  | [AB5500_DEVID_REGULATORS] = { | 
|  | .name = "ab5500-regulator", | 
|  | .id = AB5500_DEVID_REGULATORS, | 
|  | }, | 
|  | [AB5500_DEVID_SIM] = { | 
|  | .name = "ab5500-sim", | 
|  | .id = AB5500_DEVID_SIM, | 
|  | .num_resources = 1, | 
|  | .resources = (struct resource[]) { | 
|  | { | 
|  | .name = "SIMOFF", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(2, 0), /*rising*/ | 
|  | .end = AB5500_IRQ(2, 1), /*falling*/ | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_RTC] = { | 
|  | .name = "ab5500-rtc", | 
|  | .id = AB5500_DEVID_RTC, | 
|  | .num_resources = 1, | 
|  | .resources = (struct resource[]) { | 
|  | { | 
|  | .name	= "RTC_Alarm", | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | .start	= AB5500_IRQ(1, 7), | 
|  | .end	= AB5500_IRQ(1, 7), | 
|  | } | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_CHARGER] = { | 
|  | .name = "ab5500-charger", | 
|  | .id = AB5500_DEVID_CHARGER, | 
|  | }, | 
|  | [AB5500_DEVID_ADC] = { | 
|  | .name = "ab5500-adc", | 
|  | .id = AB5500_DEVID_ADC, | 
|  | .num_resources = 10, | 
|  | .resources = (struct resource[]) { | 
|  | { | 
|  | .name = "TRIGGER-0", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(0, 0), | 
|  | .end = AB5500_IRQ(0, 0), | 
|  | }, | 
|  | { | 
|  | .name = "TRIGGER-1", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(0, 1), | 
|  | .end = AB5500_IRQ(0, 1), | 
|  | }, | 
|  | { | 
|  | .name = "TRIGGER-2", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(0, 2), | 
|  | .end = AB5500_IRQ(0, 2), | 
|  | }, | 
|  | { | 
|  | .name = "TRIGGER-3", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(0, 3), | 
|  | .end = AB5500_IRQ(0, 3), | 
|  | }, | 
|  | { | 
|  | .name = "TRIGGER-4", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(0, 4), | 
|  | .end = AB5500_IRQ(0, 4), | 
|  | }, | 
|  | { | 
|  | .name = "TRIGGER-5", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(0, 5), | 
|  | .end = AB5500_IRQ(0, 5), | 
|  | }, | 
|  | { | 
|  | .name = "TRIGGER-6", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(0, 6), | 
|  | .end = AB5500_IRQ(0, 6), | 
|  | }, | 
|  | { | 
|  | .name = "TRIGGER-7", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(0, 7), | 
|  | .end = AB5500_IRQ(0, 7), | 
|  | }, | 
|  | { | 
|  | .name = "TRIGGER-VBAT", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(0, 8), | 
|  | .end = AB5500_IRQ(0, 8), | 
|  | }, | 
|  | { | 
|  | .name = "TRIGGER-VBAT-TXON", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(0, 9), | 
|  | .end = AB5500_IRQ(0, 9), | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_FUELGAUGE] = { | 
|  | .name = "ab5500-fuelgauge", | 
|  | .id = AB5500_DEVID_FUELGAUGE, | 
|  | .num_resources = 6, | 
|  | .resources = (struct resource[]) { | 
|  | { | 
|  | .name = "Batt_attach", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(7, 5), | 
|  | .end = AB5500_IRQ(7, 5), | 
|  | }, | 
|  | { | 
|  | .name = "Batt_removal", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(7, 6), | 
|  | .end = AB5500_IRQ(7, 6), | 
|  | }, | 
|  | { | 
|  | .name = "UART_framing", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(7, 7), | 
|  | .end = AB5500_IRQ(7, 7), | 
|  | }, | 
|  | { | 
|  | .name = "UART_overrun", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(8, 0), | 
|  | .end = AB5500_IRQ(8, 0), | 
|  | }, | 
|  | { | 
|  | .name = "UART_Rdy_RX", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(8, 1), | 
|  | .end = AB5500_IRQ(8, 1), | 
|  | }, | 
|  | { | 
|  | .name = "UART_Rdy_TX", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(8, 2), | 
|  | .end = AB5500_IRQ(8, 2), | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_VIBRATOR] = { | 
|  | .name = "ab5500-vibrator", | 
|  | .id = AB5500_DEVID_VIBRATOR, | 
|  | }, | 
|  | [AB5500_DEVID_CODEC] = { | 
|  | .name = "ab5500-codec", | 
|  | .id = AB5500_DEVID_CODEC, | 
|  | .num_resources = 3, | 
|  | .resources = (struct resource[]) { | 
|  | { | 
|  | .name = "audio_spkr1_ovc", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(9, 5), | 
|  | .end = AB5500_IRQ(9, 5), | 
|  | }, | 
|  | { | 
|  | .name = "audio_plllocked", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(9, 6), | 
|  | .end = AB5500_IRQ(9, 6), | 
|  | }, | 
|  | { | 
|  | .name = "audio_spkr2_ovc", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(17, 4), | 
|  | .end = AB5500_IRQ(17, 4), | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_USB] = { | 
|  | .name = "ab5500-usb", | 
|  | .id = AB5500_DEVID_USB, | 
|  | .num_resources = 36, | 
|  | .resources = (struct resource[]) { | 
|  | { | 
|  | .name = "Link_Update", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(22, 1), | 
|  | .end = AB5500_IRQ(22, 1), | 
|  | }, | 
|  | { | 
|  | .name = "DCIO", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(8, 3), | 
|  | .end = AB5500_IRQ(8, 4), | 
|  | }, | 
|  | { | 
|  | .name = "VBUS_R", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(8, 5), | 
|  | .end = AB5500_IRQ(8, 5), | 
|  | }, | 
|  | { | 
|  | .name = "VBUS_F", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(8, 6), | 
|  | .end = AB5500_IRQ(8, 6), | 
|  | }, | 
|  | { | 
|  | .name = "CHGstate_10_PCVBUSchg", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(8, 7), | 
|  | .end = AB5500_IRQ(8, 7), | 
|  | }, | 
|  | { | 
|  | .name = "DCIOreverse_ovc", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(9, 0), | 
|  | .end = AB5500_IRQ(9, 0), | 
|  | }, | 
|  | { | 
|  | .name = "USBCharDetDone", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(9, 1), | 
|  | .end = AB5500_IRQ(9, 1), | 
|  | }, | 
|  | { | 
|  | .name = "DCIO_no_limit", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(9, 2), | 
|  | .end = AB5500_IRQ(9, 2), | 
|  | }, | 
|  | { | 
|  | .name = "USB_suspend", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(9, 3), | 
|  | .end = AB5500_IRQ(9, 3), | 
|  | }, | 
|  | { | 
|  | .name = "DCIOreverse_fwdcurrent", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(9, 4), | 
|  | .end = AB5500_IRQ(9, 4), | 
|  | }, | 
|  | { | 
|  | .name = "Vbus_Imeasmax_change", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(9, 5), | 
|  | .end = AB5500_IRQ(9, 6), | 
|  | }, | 
|  | { | 
|  | .name = "OVV", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(14, 5), | 
|  | .end = AB5500_IRQ(14, 5), | 
|  | }, | 
|  | { | 
|  | .name = "USBcharging_NOTok", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(15, 3), | 
|  | .end = AB5500_IRQ(15, 3), | 
|  | }, | 
|  | { | 
|  | .name = "usb_adp_sensoroff", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(15, 6), | 
|  | .end = AB5500_IRQ(15, 6), | 
|  | }, | 
|  | { | 
|  | .name = "usb_adp_probeplug", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(15, 7), | 
|  | .end = AB5500_IRQ(15, 7), | 
|  | }, | 
|  | { | 
|  | .name = "usb_adp_sinkerror", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(16, 0), | 
|  | .end = AB5500_IRQ(16, 6), | 
|  | }, | 
|  | { | 
|  | .name = "usb_adp_sourceerror", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(16, 1), | 
|  | .end = AB5500_IRQ(16, 1), | 
|  | }, | 
|  | { | 
|  | .name = "usb_idgnd_r", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(16, 2), | 
|  | .end = AB5500_IRQ(16, 2), | 
|  | }, | 
|  | { | 
|  | .name = "usb_idgnd_f", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(16, 3), | 
|  | .end = AB5500_IRQ(16, 3), | 
|  | }, | 
|  | { | 
|  | .name = "usb_iddetR1", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(16, 4), | 
|  | .end = AB5500_IRQ(16, 5), | 
|  | }, | 
|  | { | 
|  | .name = "usb_iddetR2", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(16, 6), | 
|  | .end = AB5500_IRQ(16, 7), | 
|  | }, | 
|  | { | 
|  | .name = "usb_iddetR3", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(17, 0), | 
|  | .end = AB5500_IRQ(17, 1), | 
|  | }, | 
|  | { | 
|  | .name = "usb_iddetR4", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(17, 2), | 
|  | .end = AB5500_IRQ(17, 3), | 
|  | }, | 
|  | { | 
|  | .name = "CharTempWindowOk", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(17, 7), | 
|  | .end = AB5500_IRQ(18, 0), | 
|  | }, | 
|  | { | 
|  | .name = "USB_SprDetect", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(18, 1), | 
|  | .end = AB5500_IRQ(18, 1), | 
|  | }, | 
|  | { | 
|  | .name = "usb_adp_probe_unplug", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(18, 2), | 
|  | .end = AB5500_IRQ(18, 2), | 
|  | }, | 
|  | { | 
|  | .name = "VBUSChDrop", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(18, 3), | 
|  | .end = AB5500_IRQ(18, 4), | 
|  | }, | 
|  | { | 
|  | .name = "dcio_char_rec_done", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(18, 5), | 
|  | .end = AB5500_IRQ(18, 5), | 
|  | }, | 
|  | { | 
|  | .name = "Charging_stopped_by_temp", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(18, 6), | 
|  | .end = AB5500_IRQ(18, 6), | 
|  | }, | 
|  | { | 
|  | .name = "CHGstate_11_SafeModeVBUS", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(21, 1), | 
|  | .end = AB5500_IRQ(21, 2), | 
|  | }, | 
|  | { | 
|  | .name = "CHGstate_12_comletedVBUS", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(21, 2), | 
|  | .end = AB5500_IRQ(21, 2), | 
|  | }, | 
|  | { | 
|  | .name = "CHGstate_13_completedVBUS", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(21, 3), | 
|  | .end = AB5500_IRQ(21, 3), | 
|  | }, | 
|  | { | 
|  | .name = "CHGstate_14_FullChgDCIO", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(21, 4), | 
|  | .end = AB5500_IRQ(21, 4), | 
|  | }, | 
|  | { | 
|  | .name = "CHGstate_15_SafeModeDCIO", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(21, 5), | 
|  | .end = AB5500_IRQ(21, 5), | 
|  | }, | 
|  | { | 
|  | .name = "CHGstate_16_OFFsuspendDCIO", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(21, 6), | 
|  | .end = AB5500_IRQ(21, 6), | 
|  | }, | 
|  | { | 
|  | .name = "CHGstate_17_completedDCIO", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(21, 7), | 
|  | .end = AB5500_IRQ(21, 7), | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_OTP] = { | 
|  | .name = "ab5500-otp", | 
|  | .id = AB5500_DEVID_OTP, | 
|  | }, | 
|  | [AB5500_DEVID_VIDEO] = { | 
|  | .name = "ab5500-video", | 
|  | .id = AB5500_DEVID_VIDEO, | 
|  | .num_resources = 1, | 
|  | .resources = (struct resource[]) { | 
|  | { | 
|  | .name = "plugTVdet", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(22, 2), | 
|  | .end = AB5500_IRQ(22, 2), | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_DBIECI] = { | 
|  | .name = "ab5500-dbieci", | 
|  | .id = AB5500_DEVID_DBIECI, | 
|  | .num_resources = 10, | 
|  | .resources = (struct resource[]) { | 
|  | { | 
|  | .name = "COLL", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(14, 0), | 
|  | .end = AB5500_IRQ(14, 0), | 
|  | }, | 
|  | { | 
|  | .name = "RESERR", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(14, 1), | 
|  | .end = AB5500_IRQ(14, 1), | 
|  | }, | 
|  | { | 
|  | .name = "FRAERR", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(14, 2), | 
|  | .end = AB5500_IRQ(14, 2), | 
|  | }, | 
|  | { | 
|  | .name = "COMERR", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(14, 3), | 
|  | .end = AB5500_IRQ(14, 3), | 
|  | }, | 
|  | { | 
|  | .name = "BSI_indicator", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(14, 4), | 
|  | .end = AB5500_IRQ(14, 4), | 
|  | }, | 
|  | { | 
|  | .name = "SPDSET", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(14, 6), | 
|  | .end = AB5500_IRQ(14, 6), | 
|  | }, | 
|  | { | 
|  | .name = "DSENT", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(14, 7), | 
|  | .end = AB5500_IRQ(14, 7), | 
|  | }, | 
|  | { | 
|  | .name = "DREC", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(15, 0), | 
|  | .end = AB5500_IRQ(15, 0), | 
|  | }, | 
|  | { | 
|  | .name = "ACCINT", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(15, 1), | 
|  | .end = AB5500_IRQ(15, 1), | 
|  | }, | 
|  | { | 
|  | .name = "NOPINT", | 
|  | .flags = IORESOURCE_IRQ, | 
|  | .start = AB5500_IRQ(15, 2), | 
|  | .end = AB5500_IRQ(15, 2), | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [AB5500_DEVID_ONSWA] = { | 
|  | .name = "ab5500-onswa", | 
|  | .id = AB5500_DEVID_ONSWA, | 
|  | .num_resources = 2, | 
|  | .resources = (struct resource[]) { | 
|  | { | 
|  | .name	= "ONSWAn_rising", | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | .start	= AB5500_IRQ(1, 3), | 
|  | .end	= AB5500_IRQ(1, 3), | 
|  | }, | 
|  | { | 
|  | .name	= "ONSWAn_falling", | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | .start	= AB5500_IRQ(1, 4), | 
|  | .end	= AB5500_IRQ(1, 4), | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Functionality for getting/setting register values. | 
|  | */ | 
|  | int ab5500_get_register_interruptible_raw(struct ab5500 *ab, | 
|  | u8 bank, u8 reg, | 
|  | u8 *value) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | if (bank >= AB5500_NUM_BANKS) | 
|  | return -EINVAL; | 
|  |  | 
|  | err = mutex_lock_interruptible(&ab->access_mutex); | 
|  | if (err) | 
|  | return err; | 
|  | err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, reg, value, 1); | 
|  |  | 
|  | mutex_unlock(&ab->access_mutex); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int get_register_page_interruptible(struct ab5500 *ab, u8 bank, | 
|  | u8 first_reg, u8 *regvals, u8 numregs) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | if (bank >= AB5500_NUM_BANKS) | 
|  | return -EINVAL; | 
|  |  | 
|  | err = mutex_lock_interruptible(&ab->access_mutex); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | while (numregs) { | 
|  | /* The hardware limit for get page is 4 */ | 
|  | u8 curnum = min_t(u8, numregs, 4u); | 
|  |  | 
|  | err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, | 
|  | first_reg, regvals, curnum); | 
|  | if (err) | 
|  | goto out; | 
|  |  | 
|  | numregs -= curnum; | 
|  | first_reg += curnum; | 
|  | regvals += curnum; | 
|  | } | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&ab->access_mutex); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank, | 
|  | u8 reg, u8 bitmask, u8 bitvalues) | 
|  | { | 
|  | int err = 0; | 
|  |  | 
|  | if (bank >= AB5500_NUM_BANKS) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (bitmask) { | 
|  | u8 buf; | 
|  |  | 
|  | err = mutex_lock_interruptible(&ab->access_mutex); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (bitmask == 0xFF) /* No need to read in this case. */ | 
|  | buf = bitvalues; | 
|  | else { /* Read and modify the register value. */ | 
|  | err = db5500_prcmu_abb_read(bankinfo[bank].slave_addr, | 
|  | reg, &buf, 1); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | buf = ((~bitmask & buf) | (bitmask & bitvalues)); | 
|  | } | 
|  | /* Write the new value. */ | 
|  | err = db5500_prcmu_abb_write(bankinfo[bank].slave_addr, reg, | 
|  | &buf, 1); | 
|  |  | 
|  | mutex_unlock(&ab->access_mutex); | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int | 
|  | set_register_interruptible(struct ab5500 *ab, u8 bank, u8 reg, u8 value) | 
|  | { | 
|  | return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg, | 
|  | 0xff, value); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Read/write permission checking functions. | 
|  | */ | 
|  | static const struct ab5500_i2c_ranges *get_bankref(u8 devid, u8 bank) | 
|  | { | 
|  | u8 i; | 
|  |  | 
|  | if (devid < AB5500_NUM_DEVICES) { | 
|  | for (i = 0; i < ab5500_bank_ranges[devid].nbanks; i++) { | 
|  | if (ab5500_bank_ranges[devid].bank[i].bankid == bank) | 
|  | return &ab5500_bank_ranges[devid].bank[i]; | 
|  | } | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static bool page_write_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg) | 
|  | { | 
|  | u8 i; /* range loop index */ | 
|  | const struct ab5500_i2c_ranges *bankref; | 
|  |  | 
|  | bankref = get_bankref(devid, bank); | 
|  | if (bankref == NULL || last_reg < first_reg) | 
|  | return false; | 
|  |  | 
|  | for (i = 0; i < bankref->nranges; i++) { | 
|  | if (first_reg < bankref->range[i].first) | 
|  | break; | 
|  | if ((last_reg <= bankref->range[i].last) && | 
|  | (bankref->range[i].perm & AB5500_PERM_WR)) | 
|  | return true; | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static bool reg_write_allowed(u8 devid, u8 bank, u8 reg) | 
|  | { | 
|  | return page_write_allowed(devid, bank, reg, reg); | 
|  | } | 
|  |  | 
|  | static bool page_read_allowed(u8 devid, u8 bank, u8 first_reg, u8 last_reg) | 
|  | { | 
|  | u8 i; | 
|  | const struct ab5500_i2c_ranges *bankref; | 
|  |  | 
|  | bankref = get_bankref(devid, bank); | 
|  | if (bankref == NULL || last_reg < first_reg) | 
|  | return false; | 
|  |  | 
|  |  | 
|  | /* Find the range (if it exists in the list) that includes first_reg. */ | 
|  | for (i = 0; i < bankref->nranges; i++) { | 
|  | if (first_reg < bankref->range[i].first) | 
|  | return false; | 
|  | if (first_reg <= bankref->range[i].last) | 
|  | break; | 
|  | } | 
|  | /* Make sure that the entire range up to and including last_reg is | 
|  | * readable. This may span several of the ranges in the list. | 
|  | */ | 
|  | while ((i < bankref->nranges) && | 
|  | (bankref->range[i].perm & AB5500_PERM_RD)) { | 
|  | if (last_reg <= bankref->range[i].last) | 
|  | return true; | 
|  | if ((++i >= bankref->nranges) || | 
|  | (bankref->range[i].first != | 
|  | (bankref->range[i - 1].last + 1))) { | 
|  | break; | 
|  | } | 
|  | } | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static bool reg_read_allowed(u8 devid, u8 bank, u8 reg) | 
|  | { | 
|  | return page_read_allowed(devid, bank, reg, reg); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * The exported register access functionality. | 
|  | */ | 
|  | static int ab5500_get_chip_id(struct device *dev) | 
|  | { | 
|  | struct ab5500 *ab = dev_get_drvdata(dev->parent); | 
|  |  | 
|  | return (int)ab->chip_id; | 
|  | } | 
|  |  | 
|  | static int ab5500_mask_and_set_register_interruptible(struct device *dev, | 
|  | u8 bank, u8 reg, u8 bitmask, u8 bitvalues) | 
|  | { | 
|  | struct ab5500 *ab; | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  |  | 
|  | if ((AB5500_NUM_BANKS <= bank) || | 
|  | !reg_write_allowed(pdev->id, bank, reg)) | 
|  | return -EINVAL; | 
|  |  | 
|  | ab = dev_get_drvdata(dev->parent); | 
|  | return ab5500_mask_and_set_register_interruptible_raw(ab, bank, reg, | 
|  | bitmask, bitvalues); | 
|  | } | 
|  |  | 
|  | static int ab5500_set_register_interruptible(struct device *dev, u8 bank, | 
|  | u8 reg, u8 value) | 
|  | { | 
|  | return ab5500_mask_and_set_register_interruptible(dev, bank, reg, 0xFF, | 
|  | value); | 
|  | } | 
|  |  | 
|  | static int ab5500_get_register_interruptible(struct device *dev, u8 bank, | 
|  | u8 reg, u8 *value) | 
|  | { | 
|  | struct ab5500 *ab; | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  |  | 
|  | if ((AB5500_NUM_BANKS <= bank) || | 
|  | !reg_read_allowed(pdev->id, bank, reg)) | 
|  | return -EINVAL; | 
|  |  | 
|  | ab = dev_get_drvdata(dev->parent); | 
|  | return ab5500_get_register_interruptible_raw(ab, bank, reg, value); | 
|  | } | 
|  |  | 
|  | static int ab5500_get_register_page_interruptible(struct device *dev, u8 bank, | 
|  | u8 first_reg, u8 *regvals, u8 numregs) | 
|  | { | 
|  | struct ab5500 *ab; | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  |  | 
|  | if ((AB5500_NUM_BANKS <= bank) || | 
|  | !page_read_allowed(pdev->id, bank, | 
|  | first_reg, (first_reg + numregs - 1))) | 
|  | return -EINVAL; | 
|  |  | 
|  | ab = dev_get_drvdata(dev->parent); | 
|  | return get_register_page_interruptible(ab, bank, first_reg, regvals, | 
|  | numregs); | 
|  | } | 
|  |  | 
|  | static int | 
|  | ab5500_event_registers_startup_state_get(struct device *dev, u8 *event) | 
|  | { | 
|  | struct ab5500 *ab; | 
|  |  | 
|  | ab = dev_get_drvdata(dev->parent); | 
|  | if (!ab->startup_events_read) | 
|  | return -EAGAIN; /* Try again later */ | 
|  |  | 
|  | memcpy(event, ab->startup_events, AB5500_NUM_EVENT_REG); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct abx500_ops ab5500_ops = { | 
|  | .get_chip_id = ab5500_get_chip_id, | 
|  | .get_register = ab5500_get_register_interruptible, | 
|  | .set_register = ab5500_set_register_interruptible, | 
|  | .get_register_page = ab5500_get_register_page_interruptible, | 
|  | .set_register_page = NULL, | 
|  | .mask_and_set_register = ab5500_mask_and_set_register_interruptible, | 
|  | .event_registers_startup_state_get = | 
|  | ab5500_event_registers_startup_state_get, | 
|  | .startup_irq_enabled = NULL, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * ab5500_setup : Basic set-up, datastructure creation/destruction | 
|  | *		  and I2C interface.This sets up a default config | 
|  | *		  in the AB5500 chip so that it will work as expected. | 
|  | * @ab :	  Pointer to ab5500 structure | 
|  | * @settings :    Pointer to struct abx500_init_settings | 
|  | * @size :        Size of init data | 
|  | */ | 
|  | static int __init ab5500_setup(struct ab5500 *ab, | 
|  | struct abx500_init_settings *settings, unsigned int size) | 
|  | { | 
|  | int err = 0; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < size; i++) { | 
|  | err = ab5500_mask_and_set_register_interruptible_raw(ab, | 
|  | settings[i].bank, | 
|  | settings[i].reg, | 
|  | 0xFF, settings[i].setting); | 
|  | if (err) | 
|  | goto exit_no_setup; | 
|  |  | 
|  | /* If event mask register update the event mask in ab5500 */ | 
|  | if ((settings[i].bank == AB5500_BANK_IT) && | 
|  | (AB5500_MASK_BASE <= settings[i].reg) && | 
|  | (settings[i].reg <= AB5500_MASK_END)) { | 
|  | ab->mask[settings[i].reg - AB5500_MASK_BASE] = | 
|  | settings[i].setting; | 
|  | } | 
|  | } | 
|  | exit_no_setup: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | struct ab_family_id { | 
|  | u8	id; | 
|  | char	*name; | 
|  | }; | 
|  |  | 
|  | static const struct ab_family_id ids[] __initdata = { | 
|  | /* AB5500 */ | 
|  | { | 
|  | .id = AB5500_1_0, | 
|  | .name = "1.0" | 
|  | }, | 
|  | { | 
|  | .id = AB5500_1_1, | 
|  | .name = "1.1" | 
|  | }, | 
|  | /* Terminator */ | 
|  | { | 
|  | .id = 0x00, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static int __init ab5500_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct ab5500 *ab; | 
|  | struct ab5500_platform_data *ab5500_plf_data = | 
|  | pdev->dev.platform_data; | 
|  | int err; | 
|  | int i; | 
|  |  | 
|  | ab = kzalloc(sizeof(struct ab5500), GFP_KERNEL); | 
|  | if (!ab) { | 
|  | dev_err(&pdev->dev, | 
|  | "could not allocate ab5500 device\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* Initialize data structure */ | 
|  | mutex_init(&ab->access_mutex); | 
|  | mutex_init(&ab->irq_lock); | 
|  | ab->dev = &pdev->dev; | 
|  |  | 
|  | platform_set_drvdata(pdev, ab); | 
|  |  | 
|  | /* Read chip ID register */ | 
|  | err = ab5500_get_register_interruptible_raw(ab, | 
|  | AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP, | 
|  | AB5500_CHIP_ID, &ab->chip_id); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "could not communicate with the analog " | 
|  | "baseband chip\n"); | 
|  | goto exit_no_detect; | 
|  | } | 
|  |  | 
|  | for (i = 0; ids[i].id != 0x0; i++) { | 
|  | if (ids[i].id == ab->chip_id) { | 
|  | snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1, | 
|  | "AB5500 %s", ids[i].name); | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (ids[i].id == 0x0) { | 
|  | dev_err(&pdev->dev, "unknown analog baseband chip id: 0x%x\n", | 
|  | ab->chip_id); | 
|  | dev_err(&pdev->dev, "driver not started!\n"); | 
|  | goto exit_no_detect; | 
|  | } | 
|  |  | 
|  | /* Clear and mask all interrupts */ | 
|  | for (i = 0; i < AB5500_NUM_IRQ_REGS; i++) { | 
|  | u8 latchreg = AB5500_IT_LATCH0_REG + i; | 
|  | u8 maskreg = AB5500_IT_MASK0_REG + i; | 
|  | u8 val; | 
|  |  | 
|  | ab5500_get_register_interruptible_raw(ab, AB5500_BANK_IT, | 
|  | latchreg, &val); | 
|  | set_register_interruptible(ab, AB5500_BANK_IT, maskreg, 0xff); | 
|  | ab->mask[i] = ab->oldmask[i] = 0xff; | 
|  | } | 
|  |  | 
|  | err = abx500_register_ops(&pdev->dev, &ab5500_ops); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "ab5500_register ops error\n"); | 
|  | goto exit_no_detect; | 
|  | } | 
|  |  | 
|  | /* Set up and register the platform devices. */ | 
|  | for (i = 0; i < AB5500_NUM_DEVICES; i++) { | 
|  | ab5500_devs[i].platform_data = ab5500_plf_data->dev_data[i]; | 
|  | ab5500_devs[i].pdata_size = | 
|  | sizeof(ab5500_plf_data->dev_data[i]); | 
|  | } | 
|  |  | 
|  | err = mfd_add_devices(&pdev->dev, 0, ab5500_devs, | 
|  | ARRAY_SIZE(ab5500_devs), NULL, | 
|  | ab5500_plf_data->irq.base); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "ab5500_mfd_add_device error\n"); | 
|  | goto exit_no_detect; | 
|  | } | 
|  |  | 
|  | err = ab5500_setup(ab, ab5500_plf_data->init_settings, | 
|  | ab5500_plf_data->init_settings_sz); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "ab5500_setup error\n"); | 
|  | goto exit_no_detect; | 
|  | } | 
|  |  | 
|  | ab5500_setup_debugfs(ab); | 
|  |  | 
|  | dev_info(&pdev->dev, "detected AB chip: %s\n", &ab->chip_name[0]); | 
|  | return 0; | 
|  |  | 
|  | exit_no_detect: | 
|  | kfree(ab); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int __exit ab5500_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct ab5500 *ab = platform_get_drvdata(pdev); | 
|  |  | 
|  | ab5500_remove_debugfs(); | 
|  | mfd_remove_devices(&pdev->dev); | 
|  | kfree(ab); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver ab5500_driver = { | 
|  | .driver = { | 
|  | .name = "ab5500-core", | 
|  | .owner = THIS_MODULE, | 
|  | }, | 
|  | .remove  = __exit_p(ab5500_remove), | 
|  | }; | 
|  |  | 
|  | static int __init ab5500_core_init(void) | 
|  | { | 
|  | return platform_driver_probe(&ab5500_driver, ab5500_probe); | 
|  | } | 
|  |  | 
|  | static void __exit ab5500_core_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&ab5500_driver); | 
|  | } | 
|  |  | 
|  | subsys_initcall(ab5500_core_init); | 
|  | module_exit(ab5500_core_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>"); | 
|  | MODULE_DESCRIPTION("AB5500 core driver"); | 
|  | MODULE_LICENSE("GPL"); |