blob: 0bbfd647f5c6dec3c12c52c621a94cf57975ebc5 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* linux/include/amba/bus.h
*
* This device type deals with ARM PrimeCells and anything else that
* presents a proper CID (0xB105F00D) at the end of the I/O register
* region or that is derived from a PrimeCell.
*
* Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
*/
#ifndef ASMARM_AMBA_H
#define ASMARM_AMBA_H
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/mod_devicetable.h>
#include <linux/err.h>
#include <linux/resource.h>
#include <linux/regulator/consumer.h>
#define AMBA_NR_IRQS 9
#define AMBA_CID 0xb105f00d
#define CORESIGHT_CID 0xb105900d
/*
* CoreSight Architecture specification updates the ID specification
* for components on the AMBA bus. (ARM IHI 0029E)
*
* Bits 15:12 of the CID are the device class.
*
* Class 0xF remains for PrimeCell and legacy components. (AMBA_CID above)
* Class 0x9 defines the component as CoreSight (CORESIGHT_CID above)
* Class 0x0, 0x1, 0xB, 0xE define components that do not have driver support
* at present.
* Class 0x2-0x8,0xA and 0xD-0xD are presently reserved.
*
* Remaining CID bits stay as 0xb105-00d
*/
/**
* Class 0x9 components use additional values to form a Unique Component
* Identifier (UCI), where peripheral ID values are identical for different
* components. Passed to the amba bus code from the component driver via
* the amba_id->data pointer.
* @devarch : coresight devarch register value
* @devarch_mask: mask bits used for matching. 0 indicates UCI not used.
* @devtype : coresight device type value
* @data : additional driver data. As we have usurped the original
* pointer some devices may still need additional data
*/
struct amba_cs_uci_id {
unsigned int devarch;
unsigned int devarch_mask;
unsigned int devtype;
void *data;
};
/* define offsets for registers used by UCI */
#define UCI_REG_DEVTYPE_OFFSET 0xFCC
#define UCI_REG_DEVARCH_OFFSET 0xFBC
struct clk;
struct amba_device {
struct device dev;
struct resource res;
struct clk *pclk;
struct device_dma_parameters dma_parms;
unsigned int periphid;
unsigned int cid;
struct amba_cs_uci_id uci;
unsigned int irq[AMBA_NR_IRQS];
char *driver_override;
};
struct amba_driver {
struct device_driver drv;
int (*probe)(struct amba_device *, const struct amba_id *);
int (*remove)(struct amba_device *);
void (*shutdown)(struct amba_device *);
const struct amba_id *id_table;
};
/*
* Constants for the designer field of the Peripheral ID register. When bit 7
* is set to '1', bits [6:0] should be the JEP106 manufacturer identity code.
*/
enum amba_vendor {
AMBA_VENDOR_ARM = 0x41,
AMBA_VENDOR_ST = 0x80,
AMBA_VENDOR_QCOM = 0x51,
AMBA_VENDOR_LSI = 0xb6,
AMBA_VENDOR_LINUX = 0xfe, /* This value is not official */
};
/* This is used to generate pseudo-ID for AMBA device */
#define AMBA_LINUX_ID(conf, rev, part) \
(((conf) & 0xff) << 24 | ((rev) & 0xf) << 20 | \
AMBA_VENDOR_LINUX << 12 | ((part) & 0xfff))
extern struct bus_type amba_bustype;
#define to_amba_device(d) container_of(d, struct amba_device, dev)
#define amba_get_drvdata(d) dev_get_drvdata(&d->dev)
#define amba_set_drvdata(d,p) dev_set_drvdata(&d->dev, p)
int amba_driver_register(struct amba_driver *);
void amba_driver_unregister(struct amba_driver *);
struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t);
void amba_device_put(struct amba_device *);
int amba_device_add(struct amba_device *, struct resource *);
int amba_device_register(struct amba_device *, struct resource *);
struct amba_device *amba_apb_device_add(struct device *parent, const char *name,
resource_size_t base, size_t size,
int irq1, int irq2, void *pdata,
unsigned int periphid);
struct amba_device *amba_ahb_device_add(struct device *parent, const char *name,
resource_size_t base, size_t size,
int irq1, int irq2, void *pdata,
unsigned int periphid);
struct amba_device *
amba_apb_device_add_res(struct device *parent, const char *name,
resource_size_t base, size_t size, int irq1,
int irq2, void *pdata, unsigned int periphid,
struct resource *resbase);
struct amba_device *
amba_ahb_device_add_res(struct device *parent, const char *name,
resource_size_t base, size_t size, int irq1,
int irq2, void *pdata, unsigned int periphid,
struct resource *resbase);
void amba_device_unregister(struct amba_device *);
struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int);
int amba_request_regions(struct amba_device *, const char *);
void amba_release_regions(struct amba_device *);
static inline int amba_pclk_enable(struct amba_device *dev)
{
return clk_enable(dev->pclk);
}
static inline void amba_pclk_disable(struct amba_device *dev)
{
clk_disable(dev->pclk);
}
static inline int amba_pclk_prepare(struct amba_device *dev)
{
return clk_prepare(dev->pclk);
}
static inline void amba_pclk_unprepare(struct amba_device *dev)
{
clk_unprepare(dev->pclk);
}
/* Some drivers don't use the struct amba_device */
#define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff)
#define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f)
#define AMBA_MANF_BITS(a) (((a) >> 12) & 0xff)
#define AMBA_PART_BITS(a) ((a) & 0xfff)
#define amba_config(d) AMBA_CONFIG_BITS((d)->periphid)
#define amba_rev(d) AMBA_REV_BITS((d)->periphid)
#define amba_manf(d) AMBA_MANF_BITS((d)->periphid)
#define amba_part(d) AMBA_PART_BITS((d)->periphid)
#define __AMBA_DEV(busid, data, mask) \
{ \
.coherent_dma_mask = mask, \
.init_name = busid, \
.platform_data = data, \
}
/*
* APB devices do not themselves have the ability to address memory,
* so DMA masks should be zero (much like USB peripheral devices.)
* The DMA controller DMA masks should be used instead (much like
* USB host controllers in conventional PCs.)
*/
#define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) \
struct amba_device name##_device = { \
.dev = __AMBA_DEV(busid, data, 0), \
.res = DEFINE_RES_MEM(base, SZ_4K), \
.irq = irqs, \
.periphid = id, \
}
/*
* AHB devices are DMA capable, so set their DMA masks
*/
#define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data) \
struct amba_device name##_device = { \
.dev = __AMBA_DEV(busid, data, ~0ULL), \
.res = DEFINE_RES_MEM(base, SZ_4K), \
.irq = irqs, \
.periphid = id, \
}
/*
* module_amba_driver() - Helper macro for drivers that don't do anything
* special in module init/exit. This eliminates a lot of boilerplate. Each
* module may only use this macro once, and calling it replaces module_init()
* and module_exit()
*/
#define module_amba_driver(__amba_drv) \
module_driver(__amba_drv, amba_driver_register, amba_driver_unregister)
/*
* builtin_amba_driver() - Helper macro for drivers that don't do anything
* special in driver initcall. This eliminates a lot of boilerplate. Each
* driver may only use this macro once, and calling it replaces the instance
* device_initcall().
*/
#define builtin_amba_driver(__amba_drv) \
builtin_driver(__amba_drv, amba_driver_register)
#endif