| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * Copyright (C) STMicroelectronics SA 2014 | 
 |  * Authors: Vincent Abriou <vincent.abriou@st.com> | 
 |  *          Fabien Dessenne <fabien.dessenne@st.com> | 
 |  *          for STMicroelectronics. | 
 |  */ | 
 |  | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/seq_file.h> | 
 |  | 
 | #include <drm/drm_atomic.h> | 
 | #include <drm/drm_device.h> | 
 | #include <drm/drm_fb_dma_helper.h> | 
 | #include <drm/drm_framebuffer.h> | 
 | #include <drm/drm_gem_dma_helper.h> | 
 |  | 
 | #include "sti_compositor.h" | 
 | #include "sti_cursor.h" | 
 | #include "sti_plane.h" | 
 | #include "sti_vtg.h" | 
 |  | 
 | /* Registers */ | 
 | #define CUR_CTL             0x00 | 
 | #define CUR_VPO             0x0C | 
 | #define CUR_PML             0x14 | 
 | #define CUR_PMP             0x18 | 
 | #define CUR_SIZE            0x1C | 
 | #define CUR_CML             0x20 | 
 | #define CUR_AWS             0x28 | 
 | #define CUR_AWE             0x2C | 
 |  | 
 | #define CUR_CTL_CLUT_UPDATE BIT(1) | 
 |  | 
 | #define STI_CURS_MIN_SIZE   1 | 
 | #define STI_CURS_MAX_SIZE   128 | 
 |  | 
 | /* | 
 |  * pixmap dma buffer structure | 
 |  * | 
 |  * @paddr:  physical address | 
 |  * @size:   buffer size | 
 |  * @base:   virtual address | 
 |  */ | 
 | struct dma_pixmap { | 
 | 	dma_addr_t paddr; | 
 | 	size_t size; | 
 | 	void *base; | 
 | }; | 
 |  | 
 | /* | 
 |  * STI Cursor structure | 
 |  * | 
 |  * @sti_plane:    sti_plane structure | 
 |  * @dev:          driver device | 
 |  * @regs:         cursor registers | 
 |  * @width:        cursor width | 
 |  * @height:       cursor height | 
 |  * @clut:         color look up table | 
 |  * @clut_paddr:   color look up table physical address | 
 |  * @pixmap:       pixmap dma buffer (clut8-format cursor) | 
 |  */ | 
 | struct sti_cursor { | 
 | 	struct sti_plane plane; | 
 | 	struct device *dev; | 
 | 	void __iomem *regs; | 
 | 	unsigned int width; | 
 | 	unsigned int height; | 
 | 	unsigned short *clut; | 
 | 	dma_addr_t clut_paddr; | 
 | 	struct dma_pixmap pixmap; | 
 | }; | 
 |  | 
 | static const uint32_t cursor_supported_formats[] = { | 
 | 	DRM_FORMAT_ARGB8888, | 
 | }; | 
 |  | 
 | #define to_sti_cursor(x) container_of(x, struct sti_cursor, plane) | 
 |  | 
 | #define DBGFS_DUMP(reg) seq_printf(s, "\n  %-25s 0x%08X", #reg, \ | 
 | 				   readl(cursor->regs + reg)) | 
 |  | 
 | static void cursor_dbg_vpo(struct seq_file *s, u32 val) | 
 | { | 
 | 	seq_printf(s, "\txdo:%4d\tydo:%4d", val & 0x0FFF, (val >> 16) & 0x0FFF); | 
 | } | 
 |  | 
 | static void cursor_dbg_size(struct seq_file *s, u32 val) | 
 | { | 
 | 	seq_printf(s, "\t%d x %d", val & 0x07FF, (val >> 16) & 0x07FF); | 
 | } | 
 |  | 
 | static void cursor_dbg_pml(struct seq_file *s, | 
 | 			   struct sti_cursor *cursor, u32 val) | 
 | { | 
 | 	if (cursor->pixmap.paddr == val) | 
 | 		seq_printf(s, "\tVirt @: %p", cursor->pixmap.base); | 
 | } | 
 |  | 
 | static void cursor_dbg_cml(struct seq_file *s, | 
 | 			   struct sti_cursor *cursor, u32 val) | 
 | { | 
 | 	if (cursor->clut_paddr == val) | 
 | 		seq_printf(s, "\tVirt @: %p", cursor->clut); | 
 | } | 
 |  | 
 | static int cursor_dbg_show(struct seq_file *s, void *data) | 
 | { | 
 | 	struct drm_info_node *node = s->private; | 
 | 	struct sti_cursor *cursor = (struct sti_cursor *)node->info_ent->data; | 
 |  | 
 | 	seq_printf(s, "%s: (vaddr = 0x%p)", | 
 | 		   sti_plane_to_str(&cursor->plane), cursor->regs); | 
 |  | 
 | 	DBGFS_DUMP(CUR_CTL); | 
 | 	DBGFS_DUMP(CUR_VPO); | 
 | 	cursor_dbg_vpo(s, readl(cursor->regs + CUR_VPO)); | 
 | 	DBGFS_DUMP(CUR_PML); | 
 | 	cursor_dbg_pml(s, cursor, readl(cursor->regs + CUR_PML)); | 
 | 	DBGFS_DUMP(CUR_PMP); | 
 | 	DBGFS_DUMP(CUR_SIZE); | 
 | 	cursor_dbg_size(s, readl(cursor->regs + CUR_SIZE)); | 
 | 	DBGFS_DUMP(CUR_CML); | 
 | 	cursor_dbg_cml(s, cursor, readl(cursor->regs + CUR_CML)); | 
 | 	DBGFS_DUMP(CUR_AWS); | 
 | 	DBGFS_DUMP(CUR_AWE); | 
 | 	seq_putc(s, '\n'); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct drm_info_list cursor_debugfs_files[] = { | 
 | 	{ "cursor", cursor_dbg_show, 0, NULL }, | 
 | }; | 
 |  | 
 | static void cursor_debugfs_init(struct sti_cursor *cursor, | 
 | 				struct drm_minor *minor) | 
 | { | 
 | 	unsigned int i; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(cursor_debugfs_files); i++) | 
 | 		cursor_debugfs_files[i].data = cursor; | 
 |  | 
 | 	drm_debugfs_create_files(cursor_debugfs_files, | 
 | 				 ARRAY_SIZE(cursor_debugfs_files), | 
 | 				 minor->debugfs_root, minor); | 
 | } | 
 |  | 
 | static void sti_cursor_argb8888_to_clut8(struct sti_cursor *cursor, u32 *src) | 
 | { | 
 | 	u8  *dst = cursor->pixmap.base; | 
 | 	unsigned int i, j; | 
 | 	u32 a, r, g, b; | 
 |  | 
 | 	for (i = 0; i < cursor->height; i++) { | 
 | 		for (j = 0; j < cursor->width; j++) { | 
 | 			/* Pick the 2 higher bits of each component */ | 
 | 			a = (*src >> 30) & 3; | 
 | 			r = (*src >> 22) & 3; | 
 | 			g = (*src >> 14) & 3; | 
 | 			b = (*src >> 6) & 3; | 
 | 			*dst = a << 6 | r << 4 | g << 2 | b; | 
 | 			src++; | 
 | 			dst++; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static void sti_cursor_init(struct sti_cursor *cursor) | 
 | { | 
 | 	unsigned short *base = cursor->clut; | 
 | 	unsigned int a, r, g, b; | 
 |  | 
 | 	/* Assign CLUT values, ARGB444 format */ | 
 | 	for (a = 0; a < 4; a++) | 
 | 		for (r = 0; r < 4; r++) | 
 | 			for (g = 0; g < 4; g++) | 
 | 				for (b = 0; b < 4; b++) | 
 | 					*base++ = (a * 5) << 12 | | 
 | 						  (r * 5) << 8 | | 
 | 						  (g * 5) << 4 | | 
 | 						  (b * 5); | 
 | } | 
 |  | 
 | static int sti_cursor_atomic_check(struct drm_plane *drm_plane, | 
 | 				   struct drm_atomic_state *state) | 
 | { | 
 | 	struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, | 
 | 										 drm_plane); | 
 | 	struct sti_plane *plane = to_sti_plane(drm_plane); | 
 | 	struct sti_cursor *cursor = to_sti_cursor(plane); | 
 | 	struct drm_crtc *crtc = new_plane_state->crtc; | 
 | 	struct drm_framebuffer *fb = new_plane_state->fb; | 
 | 	struct drm_crtc_state *crtc_state; | 
 | 	struct drm_display_mode *mode; | 
 | 	int dst_x, dst_y, dst_w, dst_h; | 
 | 	int src_w, src_h; | 
 |  | 
 | 	/* no need for further checks if the plane is being disabled */ | 
 | 	if (!crtc || !fb) | 
 | 		return 0; | 
 |  | 
 | 	crtc_state = drm_atomic_get_crtc_state(state, crtc); | 
 | 	if (IS_ERR(crtc_state)) | 
 | 		return PTR_ERR(crtc_state); | 
 |  | 
 | 	mode = &crtc_state->mode; | 
 | 	dst_x = new_plane_state->crtc_x; | 
 | 	dst_y = new_plane_state->crtc_y; | 
 | 	dst_w = clamp_val(new_plane_state->crtc_w, 0, | 
 | 			  mode->crtc_hdisplay - dst_x); | 
 | 	dst_h = clamp_val(new_plane_state->crtc_h, 0, | 
 | 			  mode->crtc_vdisplay - dst_y); | 
 | 	/* src_x are in 16.16 format */ | 
 | 	src_w = new_plane_state->src_w >> 16; | 
 | 	src_h = new_plane_state->src_h >> 16; | 
 |  | 
 | 	if (src_w < STI_CURS_MIN_SIZE || | 
 | 	    src_h < STI_CURS_MIN_SIZE || | 
 | 	    src_w > STI_CURS_MAX_SIZE || | 
 | 	    src_h > STI_CURS_MAX_SIZE) { | 
 | 		DRM_ERROR("Invalid cursor size (%dx%d)\n", | 
 | 				src_w, src_h); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* If the cursor size has changed, re-allocated the pixmap */ | 
 | 	if (!cursor->pixmap.base || | 
 | 	    (cursor->width != src_w) || | 
 | 	    (cursor->height != src_h)) { | 
 | 		cursor->width = src_w; | 
 | 		cursor->height = src_h; | 
 |  | 
 | 		if (cursor->pixmap.base) | 
 | 			dma_free_wc(cursor->dev, cursor->pixmap.size, | 
 | 				    cursor->pixmap.base, cursor->pixmap.paddr); | 
 |  | 
 | 		cursor->pixmap.size = cursor->width * cursor->height; | 
 |  | 
 | 		cursor->pixmap.base = dma_alloc_wc(cursor->dev, | 
 | 						   cursor->pixmap.size, | 
 | 						   &cursor->pixmap.paddr, | 
 | 						   GFP_KERNEL | GFP_DMA); | 
 | 		if (!cursor->pixmap.base) { | 
 | 			DRM_ERROR("Failed to allocate memory for pixmap\n"); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!drm_fb_dma_get_gem_obj(fb, 0)) { | 
 | 		DRM_ERROR("Can't get DMA GEM object for fb\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	DRM_DEBUG_KMS("CRTC:%d (%s) drm plane:%d (%s)\n", | 
 | 		      crtc->base.id, sti_mixer_to_str(to_sti_mixer(crtc)), | 
 | 		      drm_plane->base.id, sti_plane_to_str(plane)); | 
 | 	DRM_DEBUG_KMS("(%dx%d)@(%d,%d)\n", dst_w, dst_h, dst_x, dst_y); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void sti_cursor_atomic_update(struct drm_plane *drm_plane, | 
 | 				     struct drm_atomic_state *state) | 
 | { | 
 | 	struct drm_plane_state *newstate = drm_atomic_get_new_plane_state(state, | 
 | 									  drm_plane); | 
 | 	struct sti_plane *plane = to_sti_plane(drm_plane); | 
 | 	struct sti_cursor *cursor = to_sti_cursor(plane); | 
 | 	struct drm_crtc *crtc = newstate->crtc; | 
 | 	struct drm_framebuffer *fb = newstate->fb; | 
 | 	struct drm_display_mode *mode; | 
 | 	int dst_x, dst_y; | 
 | 	struct drm_gem_dma_object *dma_obj; | 
 | 	u32 y, x; | 
 | 	u32 val; | 
 |  | 
 | 	if (!crtc || !fb) | 
 | 		return; | 
 |  | 
 | 	mode = &crtc->mode; | 
 | 	dst_x = newstate->crtc_x; | 
 | 	dst_y = newstate->crtc_y; | 
 |  | 
 | 	dma_obj = drm_fb_dma_get_gem_obj(fb, 0); | 
 |  | 
 | 	/* Convert ARGB8888 to CLUT8 */ | 
 | 	sti_cursor_argb8888_to_clut8(cursor, (u32 *)dma_obj->vaddr); | 
 |  | 
 | 	/* AWS and AWE depend on the mode */ | 
 | 	y = sti_vtg_get_line_number(*mode, 0); | 
 | 	x = sti_vtg_get_pixel_number(*mode, 0); | 
 | 	val = y << 16 | x; | 
 | 	writel(val, cursor->regs + CUR_AWS); | 
 | 	y = sti_vtg_get_line_number(*mode, mode->vdisplay - 1); | 
 | 	x = sti_vtg_get_pixel_number(*mode, mode->hdisplay - 1); | 
 | 	val = y << 16 | x; | 
 | 	writel(val, cursor->regs + CUR_AWE); | 
 |  | 
 | 	/* Set memory location, size, and position */ | 
 | 	writel(cursor->pixmap.paddr, cursor->regs + CUR_PML); | 
 | 	writel(cursor->width, cursor->regs + CUR_PMP); | 
 | 	writel(cursor->height << 16 | cursor->width, cursor->regs + CUR_SIZE); | 
 |  | 
 | 	y = sti_vtg_get_line_number(*mode, dst_y); | 
 | 	x = sti_vtg_get_pixel_number(*mode, dst_x); | 
 | 	writel((y << 16) | x, cursor->regs + CUR_VPO); | 
 |  | 
 | 	/* Set and fetch CLUT */ | 
 | 	writel(cursor->clut_paddr, cursor->regs + CUR_CML); | 
 | 	writel(CUR_CTL_CLUT_UPDATE, cursor->regs + CUR_CTL); | 
 |  | 
 | 	sti_plane_update_fps(plane, true, false); | 
 |  | 
 | 	plane->status = STI_PLANE_UPDATED; | 
 | } | 
 |  | 
 | static void sti_cursor_atomic_disable(struct drm_plane *drm_plane, | 
 | 				      struct drm_atomic_state *state) | 
 | { | 
 | 	struct drm_plane_state *oldstate = drm_atomic_get_old_plane_state(state, | 
 | 									  drm_plane); | 
 | 	struct sti_plane *plane = to_sti_plane(drm_plane); | 
 |  | 
 | 	if (!oldstate->crtc) { | 
 | 		DRM_DEBUG_DRIVER("drm plane:%d not enabled\n", | 
 | 				 drm_plane->base.id); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	DRM_DEBUG_DRIVER("CRTC:%d (%s) drm plane:%d (%s)\n", | 
 | 			 oldstate->crtc->base.id, | 
 | 			 sti_mixer_to_str(to_sti_mixer(oldstate->crtc)), | 
 | 			 drm_plane->base.id, sti_plane_to_str(plane)); | 
 |  | 
 | 	plane->status = STI_PLANE_DISABLING; | 
 | } | 
 |  | 
 | static const struct drm_plane_helper_funcs sti_cursor_helpers_funcs = { | 
 | 	.atomic_check = sti_cursor_atomic_check, | 
 | 	.atomic_update = sti_cursor_atomic_update, | 
 | 	.atomic_disable = sti_cursor_atomic_disable, | 
 | }; | 
 |  | 
 | static int sti_cursor_late_register(struct drm_plane *drm_plane) | 
 | { | 
 | 	struct sti_plane *plane = to_sti_plane(drm_plane); | 
 | 	struct sti_cursor *cursor = to_sti_cursor(plane); | 
 |  | 
 | 	cursor_debugfs_init(cursor, drm_plane->dev->primary); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct drm_plane_funcs sti_cursor_plane_helpers_funcs = { | 
 | 	.update_plane = drm_atomic_helper_update_plane, | 
 | 	.disable_plane = drm_atomic_helper_disable_plane, | 
 | 	.destroy = drm_plane_cleanup, | 
 | 	.reset = drm_atomic_helper_plane_reset, | 
 | 	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, | 
 | 	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state, | 
 | 	.late_register = sti_cursor_late_register, | 
 | }; | 
 |  | 
 | struct drm_plane *sti_cursor_create(struct drm_device *drm_dev, | 
 | 				    struct device *dev, int desc, | 
 | 				    void __iomem *baseaddr, | 
 | 				    unsigned int possible_crtcs) | 
 | { | 
 | 	struct sti_cursor *cursor; | 
 | 	size_t size; | 
 | 	int res; | 
 |  | 
 | 	cursor = devm_kzalloc(dev, sizeof(*cursor), GFP_KERNEL); | 
 | 	if (!cursor) { | 
 | 		DRM_ERROR("Failed to allocate memory for cursor\n"); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	/* Allocate clut buffer */ | 
 | 	size = 0x100 * sizeof(unsigned short); | 
 | 	cursor->clut = dma_alloc_wc(dev, size, &cursor->clut_paddr, | 
 | 				    GFP_KERNEL | GFP_DMA); | 
 |  | 
 | 	if (!cursor->clut) { | 
 | 		DRM_ERROR("Failed to allocate memory for cursor clut\n"); | 
 | 		goto err_clut; | 
 | 	} | 
 |  | 
 | 	cursor->dev = dev; | 
 | 	cursor->regs = baseaddr; | 
 | 	cursor->plane.desc = desc; | 
 | 	cursor->plane.status = STI_PLANE_DISABLED; | 
 |  | 
 | 	sti_cursor_init(cursor); | 
 |  | 
 | 	res = drm_universal_plane_init(drm_dev, &cursor->plane.drm_plane, | 
 | 				       possible_crtcs, | 
 | 				       &sti_cursor_plane_helpers_funcs, | 
 | 				       cursor_supported_formats, | 
 | 				       ARRAY_SIZE(cursor_supported_formats), | 
 | 				       NULL, DRM_PLANE_TYPE_CURSOR, NULL); | 
 | 	if (res) { | 
 | 		DRM_ERROR("Failed to initialize universal plane\n"); | 
 | 		goto err_plane; | 
 | 	} | 
 |  | 
 | 	drm_plane_helper_add(&cursor->plane.drm_plane, | 
 | 			     &sti_cursor_helpers_funcs); | 
 |  | 
 | 	sti_plane_init_property(&cursor->plane, DRM_PLANE_TYPE_CURSOR); | 
 |  | 
 | 	return &cursor->plane.drm_plane; | 
 |  | 
 | err_plane: | 
 | 	dma_free_wc(dev, size, cursor->clut, cursor->clut_paddr); | 
 | err_clut: | 
 | 	devm_kfree(dev, cursor); | 
 | 	return NULL; | 
 | } |