| # SPDX-License-Identifier: GPL-2.0-only |
| config DRM_PANEL |
| bool |
| depends on DRM |
| help |
| Panel registration and lookup framework. |
| |
| menu "Display Panels" |
| depends on DRM && DRM_PANEL |
| |
| config DRM_PANEL_ABT_Y030XX067A |
| tristate "ABT Y030XX067A 320x480 LCD panel" |
| depends on OF && SPI |
| select REGMAP_SPI |
| help |
| Say Y here to enable support for the Asia Better Technology Ltd. |
| Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 |
| and RG-99 handheld gaming consoles. |
| |
| config DRM_PANEL_ARM_VERSATILE |
| tristate "ARM Versatile panel driver" |
| depends on OF |
| depends on MFD_SYSCON |
| select VIDEOMODE_HELPERS |
| help |
| This driver supports the ARM Versatile panels connected to ARM |
| reference designs. The panel is detected using special registers |
| in the Versatile family syscon registers. |
| |
| config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 |
| tristate "ASUS Z00T TM5P5 NT35596 panel" |
| depends on GPIOLIB && OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for the ASUS TMP5P5 |
| NT35596 1080x1920 video mode panel as found in some Asus |
| Zenfone 2 Laser Z00T devices. |
| |
| config DRM_PANEL_BOE_BF060Y8M_AJ0 |
| tristate "Boe BF060Y8M-AJ0 panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Boe BF060Y8M-AJ0 |
| 5.99" AMOLED modules. The panel has a 1080x2160 resolution and |
| uses 24 bit RGB per pixel. It provides a MIPI DSI interface to |
| the host and backlight is controlled through DSI commands. |
| |
| config DRM_PANEL_BOE_HIMAX8279D |
| tristate "Boe Himax8279d panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Boe Himax8279d |
| TFT-LCD modules. The panel has a 1200x1920 resolution and uses |
| 24 bit RGB per pixel. It provides a MIPI DSI interface to |
| the host and has a built-in LED backlight. |
| |
| config DRM_PANEL_BOE_TV101WUM_NL6 |
| tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 |
| 45NA WUXGA PANEL DSI Video Mode panel |
| |
| config DRM_PANEL_DSI_CM |
| tristate "Generic DSI command mode panels" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| DRM panel driver for DSI command mode panels with support for |
| embedded and external backlights. |
| |
| config DRM_PANEL_LVDS |
| tristate "Generic LVDS panel driver" |
| depends on OF |
| depends on BACKLIGHT_CLASS_DEVICE |
| select VIDEOMODE_HELPERS |
| help |
| This driver supports LVDS panels that don't require device-specific |
| handling of power supplies or control signals. It implements automatic |
| backlight handling if the panel is attached to a backlight controller. |
| |
| config DRM_PANEL_SIMPLE |
| tristate "support for simple panels (other than eDP ones)" |
| depends on OF |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on PM |
| select VIDEOMODE_HELPERS |
| help |
| DRM panel driver for dumb non-eDP panels that need at most a regulator |
| and a GPIO to be powered up. Optionally a backlight can be attached so |
| that it can be automatically turned off when the panel goes into a |
| low power state. |
| |
| config DRM_PANEL_EDP |
| tristate "support for simple Embedded DisplayPort panels" |
| depends on OF |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on PM |
| select VIDEOMODE_HELPERS |
| select DRM_DISPLAY_DP_HELPER |
| select DRM_DISPLAY_HELPER |
| select DRM_DP_AUX_BUS |
| select DRM_KMS_HELPER |
| help |
| DRM panel driver for dumb eDP panels that need at most a regulator and |
| a GPIO to be powered up. Optionally a backlight can be attached so |
| that it can be automatically turned off when the panel goes into a |
| low power state. |
| |
| config DRM_PANEL_EBBG_FT8719 |
| tristate "EBBG FT8719 panel driver" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for the EBBG FT8719 |
| video mode panel. Mainly found on Xiaomi Poco F1 mobile phone. |
| The panel has a resolution of 1080x2246. It provides a MIPI DSI |
| interface to the host. |
| |
| config DRM_PANEL_ELIDA_KD35T133 |
| tristate "Elida KD35T133 panel driver" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for the Elida |
| KD35T133 controller for 320x480 LCD panels with MIPI-DSI |
| system interfaces. |
| |
| config DRM_PANEL_FEIXIN_K101_IM2BA02 |
| tristate "Feixin K101 IM2BA02 panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for the Feixin K101 IM2BA02 |
| 4-lane 800x1280 MIPI DSI panel. |
| |
| config DRM_PANEL_FEIYANG_FY07024DI26A30D |
| tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y if you want to enable support for panels based on the |
| Feiyang FY07024DI26A30-D MIPI-DSI interface. |
| |
| config DRM_PANEL_ILITEK_IL9322 |
| tristate "Ilitek ILI9322 320x240 QVGA panels" |
| depends on OF && SPI |
| select REGMAP |
| help |
| Say Y here if you want to enable support for Ilitek IL9322 |
| QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. |
| |
| config DRM_PANEL_ILITEK_ILI9341 |
| tristate "Ilitek ILI9341 240x320 QVGA panels" |
| depends on OF && SPI |
| select DRM_KMS_HELPER |
| select DRM_GEM_DMA_HELPER |
| depends on BACKLIGHT_CLASS_DEVICE |
| select DRM_MIPI_DBI |
| help |
| Say Y here if you want to enable support for Ilitek IL9341 |
| QVGA (240x320) RGB panels. support serial & parallel rgb |
| interface. |
| |
| config DRM_PANEL_ILITEK_ILI9881C |
| tristate "Ilitek ILI9881C-based panels" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y if you want to enable support for panels based on the |
| Ilitek ILI9881c controller. |
| |
| config DRM_PANEL_INNOLUX_EJ030NA |
| tristate "Innolux EJ030NA 320x480 LCD panel" |
| depends on OF && SPI |
| select REGMAP_SPI |
| help |
| Say Y here to enable support for the Innolux/Chimei EJ030NA |
| 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) |
| and LDK handheld gaming consoles. |
| |
| config DRM_PANEL_INNOLUX_P079ZCA |
| tristate "Innolux P079ZCA panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Innolux P079ZCA |
| TFT-LCD modules. The panel has a 1024x768 resolution and uses |
| 24 bit RGB per pixel. It provides a MIPI DSI interface to |
| the host and has a built-in LED backlight. |
| |
| config DRM_PANEL_JDI_LT070ME05000 |
| tristate "JDI LT070ME05000 WUXGA DSI panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for JDI DSI video mode |
| panel as found in Google Nexus 7 (2013) devices. |
| The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses |
| 24 bit per pixel. |
| |
| config DRM_PANEL_JDI_R63452 |
| tristate "JDI R63452 Full HD DSI panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for the JDI R63452 |
| DSI command mode panel as found in Xiaomi Mi 5 Devices. |
| |
| config DRM_PANEL_KHADAS_TS050 |
| tristate "Khadas TS050 panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Khadas TS050 TFT-LCD |
| panel module. The panel has a 1080x1920 resolution and uses |
| 24 bit RGB per pixel. It provides a MIPI DSI interface to |
| the host, a built-in LED backlight and touch controller. |
| |
| config DRM_PANEL_KINGDISPLAY_KD097D04 |
| tristate "Kingdisplay kd097d04 panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Kingdisplay kd097d04 |
| TFT-LCD modules. The panel has a 1536x2048 resolution and uses |
| 24 bit RGB per pixel. It provides a MIPI DSI interface to |
| the host and has a built-in LED backlight. |
| |
| config DRM_PANEL_LEADTEK_LTK050H3146W |
| tristate "Leadtek LTK050H3146W panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Leadtek LTK050H3146W |
| TFT-LCD modules. The panel has a 720x1280 resolution and uses |
| 24 bit RGB per pixel. It provides a MIPI DSI interface to |
| the host and has a built-in LED backlight. |
| |
| config DRM_PANEL_LEADTEK_LTK500HD1829 |
| tristate "Leadtek LTK500HD1829 panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Kingdisplay kd097d04 |
| TFT-LCD modules. The panel has a 1536x2048 resolution and uses |
| 24 bit RGB per pixel. It provides a MIPI DSI interface to |
| the host and has a built-in LED backlight. |
| |
| config DRM_PANEL_SAMSUNG_LD9040 |
| tristate "Samsung LD9040 RGB/SPI panel" |
| depends on OF && SPI |
| select VIDEOMODE_HELPERS |
| |
| config DRM_PANEL_LG_LB035Q02 |
| tristate "LG LB035Q024573 RGB panel" |
| depends on GPIOLIB && OF && SPI |
| help |
| Say Y here if you want to enable support for the LB035Q02 RGB panel |
| (found on the Gumstix Overo Palo35 board). To compile this driver as |
| a module, choose M here. |
| |
| config DRM_PANEL_LG_LG4573 |
| tristate "LG4573 RGB/SPI panel" |
| depends on OF && SPI |
| select VIDEOMODE_HELPERS |
| help |
| Say Y here if you want to enable support for LG4573 RGB panel. |
| To compile this driver as a module, choose M here. |
| |
| config DRM_PANEL_NEC_NL8048HL11 |
| tristate "NEC NL8048HL11 RGB panel" |
| depends on GPIOLIB && OF && SPI |
| help |
| Say Y here if you want to enable support for the NEC NL8048HL11 RGB |
| panel (found on the Zoom2/3/3630 SDP boards). To compile this driver |
| as a module, choose M here. |
| |
| config DRM_PANEL_NEWVISION_NV3052C |
| tristate "NewVision NV3052C RGB/SPI panel" |
| depends on OF && SPI |
| depends on BACKLIGHT_CLASS_DEVICE |
| select DRM_MIPI_DBI |
| help |
| Say Y here if you want to enable support for the panels built |
| around the NewVision NV3052C display controller. |
| |
| config DRM_PANEL_NOVATEK_NT35510 |
| tristate "Novatek NT35510 RGB panel driver" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for the panels built |
| around the Novatek NT35510 display controller, such as some |
| Hydis panels. |
| |
| config DRM_PANEL_NOVATEK_NT35560 |
| tristate "Novatek NT35560 DSI command mode panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| select VIDEOMODE_HELPERS |
| help |
| Say Y here if you want to enable the Novatek NT35560 display |
| controller. This panel supports DSI in both command and video |
| mode. This supports several panels such as Sony ACX424AKM and |
| ACX424AKP. |
| |
| config DRM_PANEL_NOVATEK_NT35950 |
| tristate "Novatek NT35950 DSI panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for the panels built |
| around the Novatek NT35950 display controller, such as some |
| Sharp panels used in Sony Xperia Z5 Premium and XZ Premium |
| mobile phones. |
| |
| config DRM_PANEL_NOVATEK_NT36672A |
| tristate "Novatek NT36672A DSI panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for the panels built |
| around the Novatek NT36672A display controller, such as some |
| Tianma panels used in a few Xiaomi Poco F1 mobile phones. |
| |
| config DRM_PANEL_NOVATEK_NT39016 |
| tristate "Novatek NT39016 RGB/SPI panel" |
| depends on OF && SPI |
| depends on BACKLIGHT_CLASS_DEVICE |
| select REGMAP_SPI |
| help |
| Say Y here if you want to enable support for the panels built |
| around the Novatek NT39016 display controller. |
| |
| config DRM_PANEL_MANTIX_MLAF057WE51 |
| tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for the Mantix |
| MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It |
| has a resolution of 720x1440 pixels, a built in backlight and touch |
| controller. |
| |
| config DRM_PANEL_OLIMEX_LCD_OLINUXINO |
| tristate "Olimex LCD-OLinuXino panel" |
| depends on OF |
| depends on I2C |
| depends on BACKLIGHT_CLASS_DEVICE |
| select CRC32 |
| help |
| The panel is used with different sizes LCDs, from 480x272 to |
| 1280x800, and 24 bit per pixel. |
| |
| Say Y here if you want to enable support for Olimex Ltd. |
| LCD-OLinuXino panel. |
| |
| config DRM_PANEL_ORISETECH_OTM8009A |
| tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Orise Technology |
| otm8009a 480x800 dsi 2dl panel. |
| |
| config DRM_PANEL_OSD_OSD101T2587_53TS |
| tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for One Stop Displays |
| OSD101T2587-53TS 10.1" 1920x1200 dsi panel. |
| |
| config DRM_PANEL_PANASONIC_VVX10F034N00 |
| tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Panasonic VVX10F034N00 |
| WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some |
| Xperia Z2 tablets |
| |
| config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN |
| tristate "Raspberry Pi 7-inch touchscreen panel" |
| depends on DRM_MIPI_DSI |
| help |
| Say Y here if you want to enable support for the Raspberry |
| Pi 7" Touchscreen. To compile this driver as a module, |
| choose M here. |
| |
| config DRM_PANEL_RAYDIUM_RM67191 |
| tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Raydium RM67191 FHD |
| (1080x1920) DSI panel. |
| |
| config DRM_PANEL_RAYDIUM_RM68200 |
| tristate "Raydium RM68200 720x1280 DSI video mode panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Raydium RM68200 |
| 720x1280 DSI video mode panel. |
| |
| config DRM_PANEL_RONBO_RB070D30 |
| tristate "Ronbo Electronics RB070D30 panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Ronbo Electronics |
| RB070D30 1024x600 DSI panel. |
| |
| config DRM_PANEL_SAMSUNG_ATNA33XC20 |
| tristate "Samsung ATNA33XC20 eDP panel" |
| depends on OF |
| depends on BACKLIGHT_CLASS_DEVICE |
| depends on PM |
| select DRM_DISPLAY_DP_HELPER |
| select DRM_DISPLAY_HELPER |
| select DRM_DP_AUX_BUS |
| help |
| DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't |
| be handled by the DRM_PANEL_SIMPLE driver because its power |
| sequencing is non-standard. |
| |
| config DRM_PANEL_SAMSUNG_DB7430 |
| tristate "Samsung DB7430-based DPI panels" |
| depends on OF && SPI && GPIOLIB |
| depends on BACKLIGHT_CLASS_DEVICE |
| select DRM_MIPI_DBI |
| help |
| Say Y here if you want to enable support for the Samsung |
| DB7430 DPI display controller used in such devices as the |
| LMS397KF04 480x800 DPI panel. |
| |
| config DRM_PANEL_SAMSUNG_S6D16D0 |
| tristate "Samsung S6D16D0 DSI video mode panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| select VIDEOMODE_HELPERS |
| |
| config DRM_PANEL_SAMSUNG_S6D27A1 |
| tristate "Samsung S6D27A1 DPI panel driver" |
| depends on OF && SPI && GPIOLIB |
| select DRM_MIPI_DBI |
| help |
| Say Y here if you want to enable support for the Samsung |
| S6D27A1 DPI 480x800 panel. |
| |
| This panel can be found in Samsung Galaxy Ace 2 |
| GT-I8160 mobile phone. |
| |
| config DRM_PANEL_SAMSUNG_S6E3HA2 |
| tristate "Samsung S6E3HA2 DSI video mode panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| select VIDEOMODE_HELPERS |
| |
| config DRM_PANEL_SAMSUNG_S6E63J0X03 |
| tristate "Samsung S6E63J0X03 DSI command mode panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| select VIDEOMODE_HELPERS |
| |
| config DRM_PANEL_SAMSUNG_S6E63M0 |
| tristate "Samsung S6E63M0 RGB panel" |
| depends on OF |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Samsung S6E63M0 |
| AMOLED LCD panel. This panel can be accessed using SPI or |
| DSI. |
| |
| config DRM_PANEL_SAMSUNG_S6E63M0_SPI |
| tristate "Samsung S6E63M0 RGB SPI interface" |
| depends on SPI |
| depends on DRM_PANEL_SAMSUNG_S6E63M0 |
| default DRM_PANEL_SAMSUNG_S6E63M0 |
| select DRM_MIPI_DBI |
| help |
| Say Y here if you want to be able to access the Samsung |
| S6E63M0 panel using SPI. |
| |
| config DRM_PANEL_SAMSUNG_S6E63M0_DSI |
| tristate "Samsung S6E63M0 RGB DSI interface" |
| depends on DRM_MIPI_DSI |
| depends on DRM_PANEL_SAMSUNG_S6E63M0 |
| help |
| Say Y here if you want to be able to access the Samsung |
| S6E63M0 panel using DSI. |
| |
| config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 |
| tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" |
| depends on OF |
| select DRM_MIPI_DSI |
| select VIDEOMODE_HELPERS |
| |
| config DRM_PANEL_SAMSUNG_S6E8AA0 |
| tristate "Samsung S6E8AA0 DSI video mode panel" |
| depends on OF |
| select DRM_MIPI_DSI |
| select VIDEOMODE_HELPERS |
| |
| config DRM_PANEL_SAMSUNG_SOFEF00 |
| tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| select VIDEOMODE_HELPERS |
| help |
| Say Y or M here if you want to enable support for the Samsung AMOLED |
| command mode panels found in the OnePlus 6/6T smartphones. |
| |
| The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively |
| |
| config DRM_PANEL_SEIKO_43WVF1G |
| tristate "Seiko 43WVF1G panel" |
| depends on OF |
| depends on BACKLIGHT_CLASS_DEVICE |
| select VIDEOMODE_HELPERS |
| help |
| Say Y here if you want to enable support for the Seiko |
| 43WVF1G controller for 800x480 LCD panels |
| |
| config DRM_PANEL_SHARP_LQ101R1SX01 |
| tristate "Sharp LQ101R1SX01 panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Sharp LQ101R1SX01 |
| TFT-LCD modules. The panel has a 2560x1600 resolution and uses |
| 24 bit RGB per pixel. It provides a dual MIPI DSI interface to |
| the host and has a built-in LED backlight. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called panel-sharp-lq101r1sx01. |
| |
| config DRM_PANEL_SHARP_LS037V7DW01 |
| tristate "Sharp LS037V7DW01 VGA LCD panel" |
| depends on GPIOLIB && OF && REGULATOR |
| help |
| Say Y here if you want to enable support for Sharp LS037V7DW01 VGA |
| (480x640) LCD panel (found on the TI SDP3430 board). |
| |
| config DRM_PANEL_SHARP_LS043T1LE01 |
| tristate "Sharp LS043T1LE01 qHD video mode panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Sharp LS043T1LE01 qHD |
| (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard |
| |
| config DRM_PANEL_SHARP_LS060T1SX01 |
| tristate "Sharp LS060T1SX01 FullHD video mode panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Sharp LS060T1SX01 6.0" |
| FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter |
| Bundle. |
| |
| config DRM_PANEL_SITRONIX_ST7701 |
| tristate "Sitronix ST7701 panel driver" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for the Sitronix |
| ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI |
| system interfaces. |
| |
| config DRM_PANEL_SITRONIX_ST7703 |
| tristate "Sitronix ST7703 based MIPI touchscreen panels" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for Sitronix ST7703 based |
| panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in |
| the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built |
| in backlight and touch controller. |
| Touch input support is provided by the goodix driver and needs to be |
| selected separately. |
| |
| config DRM_PANEL_SITRONIX_ST7789V |
| tristate "Sitronix ST7789V panel" |
| depends on OF && SPI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for the Sitronix |
| ST7789V controller for 240x320 LCD panels |
| |
| config DRM_PANEL_SONY_ACX565AKM |
| tristate "Sony ACX565AKM panel" |
| depends on GPIOLIB && OF && SPI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for the Sony ACX565AKM |
| 800x600 3.5" panel (found on the Nokia N900). |
| |
| config DRM_PANEL_SONY_TULIP_TRULY_NT35521 |
| tristate "Sony Tulip Truly NT35521 panel" |
| depends on GPIOLIB && OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for the Sony Tulip |
| NT35521 1280x720 video mode panel as found on Sony Xperia M4 |
| Aqua phone. |
| |
| config DRM_PANEL_TDO_TL070WSH30 |
| tristate "TDO TL070WSH30 DSI panel" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD |
| panel module. The panel has a 1024×600 resolution and uses |
| 24 bit RGB per pixel. It provides a MIPI DSI interface to |
| the host, a built-in LED backlight and touch controller. |
| |
| config DRM_PANEL_TPO_TD028TTEC1 |
| tristate "Toppoly (TPO) TD028TTEC1 panel driver" |
| depends on OF && SPI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for TPO TD028TTEC1 480x640 |
| 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). |
| |
| config DRM_PANEL_TPO_TD043MTEA1 |
| tristate "Toppoly (TPO) TD043MTEA1 panel driver" |
| depends on GPIOLIB && OF && REGULATOR && SPI |
| help |
| Say Y here if you want to enable support for TPO TD043MTEA1 800x480 |
| 4.3" panel (found on the OMAP3 Pandora board). |
| |
| config DRM_PANEL_TPO_TPG110 |
| tristate "TPO TPG 800x400 panel" |
| depends on OF && SPI && GPIOLIB |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for TPO TPG110 |
| 400CH LTPS TFT LCD Single Chip Digital Driver for up to |
| 800x400 LCD panels. |
| |
| config DRM_PANEL_TRULY_NT35597_WQXGA |
| tristate "Truly WQXGA" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| help |
| Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI |
| Video Mode panel |
| |
| config DRM_PANEL_VISIONOX_RM69299 |
| tristate "Visionox RM69299" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| help |
| Say Y here if you want to enable support for Visionox |
| RM69299 DSI Video Mode panel. |
| |
| config DRM_PANEL_WIDECHIPS_WS2401 |
| tristate "Widechips WS2401 DPI panel driver" |
| depends on SPI && GPIOLIB |
| depends on BACKLIGHT_CLASS_DEVICE |
| select DRM_MIPI_DBI |
| help |
| Say Y here if you want to enable support for the Widechips WS2401 DPI |
| 480x800 display controller used in panels such as Samsung LMS380KF01. |
| This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). |
| |
| config DRM_PANEL_XINPENG_XPP055C272 |
| tristate "Xinpeng XPP055C272 panel driver" |
| depends on OF |
| depends on DRM_MIPI_DSI |
| depends on BACKLIGHT_CLASS_DEVICE |
| help |
| Say Y here if you want to enable support for the Xinpeng |
| XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI |
| system interfaces. |
| endmenu |
