blob: 43f499f22e72e7ab6d17c2f50472b0c629ef8015 [file] [log] [blame]
USB xHCI controllers
Required properties:
- compatible: should be one or more of
- "generic-xhci" for generic XHCI device
- "marvell,armada3700-xhci" for Armada 37xx SoCs
- "marvell,armada-375-xhci" for Armada 375 SoCs
- "marvell,armada-380-xhci" for Armada 38x SoCs
- "brcm,bcm7445-xhci" for Broadcom STB SoCs with XHCI
- "xhci-platform" (deprecated)
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first
followed by the generic version.
- reg: should contain address and length of the standard XHCI
register set for the device.
- interrupts: one XHCI interrupt should be described here.
Optional properties:
- clocks: reference to the clocks
- clock-names: mandatory if there is a second clock, in this case
the name must be "core" for the first clock and "reg" for the
second one
- usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
- usb3-lpm-capable: determines if platform is USB3 LPM capable
- quirk-broken-port-ped: set if the controller has broken port disable mechanism
- imod-interval-ns: default interrupt moderation interval is 5000ns
- phys : see usb-hcd.yaml in the current directory
- offload: supporting USB offload feature, 0: disabled, 1: audio
additionally the properties from usb-hcd.yaml (in the current directory) are
supported.
Example:
usb@f0931000 {
compatible = "generic-xhci";
reg = <0xf0931000 0x8c8>;
interrupts = <0x0 0x4e 0x0>;
};