blob: cb4c6f6d3a33a3f50753b763f230475e0726f169 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2020 NXP
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP iMX8MP Soc USB Controller
maintainers:
- Li Jun <jun.li@nxp.com>
properties:
compatible:
const: fsl,imx8mp-dwc3
reg:
maxItems: 1
description: Address and length of the register set for the wrapper of
dwc3 core on the SOC.
"#address-cells":
enum: [ 1, 2 ]
"#size-cells":
enum: [ 1, 2 ]
dma-ranges:
description:
See section 2.3.9 of the DeviceTree Specification.
ranges: true
interrupts:
maxItems: 1
description: The interrupt that is asserted when a wakeup event is
received.
clocks:
description:
A list of phandle and clock-specifier pairs for the clocks
listed in clock-names.
items:
- description: system hsio root clock.
- description: suspend clock, used for usb wakeup logic.
clock-names:
items:
- const: hsio
- const: suspend
# Required child node:
patternProperties:
"^dwc3@[0-9a-f]+$":
type: object
description:
A child node must exist to represent the core DWC3 IP block
The content of the node is defined in dwc3.txt.
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
- dma-ranges
- ranges
- clocks
- clock-names
- interrupts
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/imx8mp-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
usb3_0: usb@32f10100 {
compatible = "fsl,imx8mp-dwc3";
reg = <0x32f10100 0x8>;
clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
<&clk IMX8MP_CLK_USB_ROOT>;
clock-names = "hsio", "suspend";
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
dma-ranges = <0x40000000 0x40000000 0xc0000000>;
ranges;
dwc3@38100000 {
compatible = "snps,dwc3";
reg = <0x38100000 0x10000>;
clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
<&clk IMX8MP_CLK_USB_CORE_REF>,
<&clk IMX8MP_CLK_USB_ROOT>;
clock-names = "bus_early", "ref", "suspend";
assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
assigned-clock-rates = <500000000>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb3_phy0>, <&usb3_phy0>;
phy-names = "usb2-phy", "usb3-phy";
snps,dis-u2-freeclk-exists-quirk;
};
};