| /* SPDX-License-Identifier: GPL-2.0-or-later */ | |
| /* | |
| * Copyright 2013 Red Hat Inc. | |
| * | |
| * Authors: Jérôme Glisse <jglisse@redhat.com> | |
| */ | |
| /* | |
| * Heterogeneous Memory Management (HMM) | |
| * | |
| * See Documentation/vm/hmm.rst for reasons and overview of what HMM is and it | |
| * is for. Here we focus on the HMM API description, with some explanation of | |
| * the underlying implementation. | |
| * | |
| * Short description: HMM provides a set of helpers to share a virtual address | |
| * space between CPU and a device, so that the device can access any valid | |
| * address of the process (while still obeying memory protection). HMM also | |
| * provides helpers to migrate process memory to device memory, and back. Each | |
| * set of functionality (address space mirroring, and migration to and from | |
| * device memory) can be used independently of the other. | |
| * | |
| * | |
| * HMM address space mirroring API: | |
| * | |
| * Use HMM address space mirroring if you want to mirror a range of the CPU | |
| * page tables of a process into a device page table. Here, "mirror" means "keep | |
| * synchronized". Prerequisites: the device must provide the ability to write- | |
| * protect its page tables (at PAGE_SIZE granularity), and must be able to | |
| * recover from the resulting potential page faults. | |
| * | |
| * HMM guarantees that at any point in time, a given virtual address points to | |
| * either the same memory in both CPU and device page tables (that is: CPU and | |
| * device page tables each point to the same pages), or that one page table (CPU | |
| * or device) points to no entry, while the other still points to the old page | |
| * for the address. The latter case happens when the CPU page table update | |
| * happens first, and then the update is mirrored over to the device page table. | |
| * This does not cause any issue, because the CPU page table cannot start | |
| * pointing to a new page until the device page table is invalidated. | |
| * | |
| * HMM uses mmu_notifiers to monitor the CPU page tables, and forwards any | |
| * updates to each device driver that has registered a mirror. It also provides | |
| * some API calls to help with taking a snapshot of the CPU page table, and to | |
| * synchronize with any updates that might happen concurrently. | |
| * | |
| * | |
| * HMM migration to and from device memory: | |
| * | |
| * HMM provides a set of helpers to hotplug device memory as ZONE_DEVICE, with | |
| * a new MEMORY_DEVICE_PRIVATE type. This provides a struct page for each page | |
| * of the device memory, and allows the device driver to manage its memory | |
| * using those struct pages. Having struct pages for device memory makes | |
| * migration easier. Because that memory is not addressable by the CPU it must | |
| * never be pinned to the device; in other words, any CPU page fault can always | |
| * cause the device memory to be migrated (copied/moved) back to regular memory. | |
| * | |
| * A new migrate helper (migrate_vma()) has been added (see mm/migrate.c) that | |
| * allows use of a device DMA engine to perform the copy operation between | |
| * regular system memory and device memory. | |
| */ | |
| #ifndef LINUX_HMM_H | |
| #define LINUX_HMM_H | |
| #include <linux/kconfig.h> | |
| #include <asm/pgtable.h> | |
| #include <linux/device.h> | |
| #include <linux/migrate.h> | |
| #include <linux/memremap.h> | |
| #include <linux/completion.h> | |
| #include <linux/mmu_notifier.h> | |
| /* | |
| * hmm_pfn_flag_e - HMM flag enums | |
| * | |
| * Flags: | |
| * HMM_PFN_VALID: pfn is valid. It has, at least, read permission. | |
| * HMM_PFN_WRITE: CPU page table has write permission set | |
| * HMM_PFN_DEVICE_PRIVATE: private device memory (ZONE_DEVICE) | |
| * | |
| * The driver provides a flags array for mapping page protections to device | |
| * PTE bits. If the driver valid bit for an entry is bit 3, | |
| * i.e., (entry & (1 << 3)), then the driver must provide | |
| * an array in hmm_range.flags with hmm_range.flags[HMM_PFN_VALID] == 1 << 3. | |
| * Same logic apply to all flags. This is the same idea as vm_page_prot in vma | |
| * except that this is per device driver rather than per architecture. | |
| */ | |
| enum hmm_pfn_flag_e { | |
| HMM_PFN_VALID = 0, | |
| HMM_PFN_WRITE, | |
| HMM_PFN_DEVICE_PRIVATE, | |
| HMM_PFN_FLAG_MAX | |
| }; | |
| /* | |
| * hmm_pfn_value_e - HMM pfn special value | |
| * | |
| * Flags: | |
| * HMM_PFN_ERROR: corresponding CPU page table entry points to poisoned memory | |
| * HMM_PFN_NONE: corresponding CPU page table entry is pte_none() | |
| * HMM_PFN_SPECIAL: corresponding CPU page table entry is special; i.e., the | |
| * result of vmf_insert_pfn() or vm_insert_page(). Therefore, it should not | |
| * be mirrored by a device, because the entry will never have HMM_PFN_VALID | |
| * set and the pfn value is undefined. | |
| * | |
| * Driver provides values for none entry, error entry, and special entry. | |
| * Driver can alias (i.e., use same value) error and special, but | |
| * it should not alias none with error or special. | |
| * | |
| * HMM pfn value returned by hmm_vma_get_pfns() or hmm_vma_fault() will be: | |
| * hmm_range.values[HMM_PFN_ERROR] if CPU page table entry is poisonous, | |
| * hmm_range.values[HMM_PFN_NONE] if there is no CPU page table entry, | |
| * hmm_range.values[HMM_PFN_SPECIAL] if CPU page table entry is a special one | |
| */ | |
| enum hmm_pfn_value_e { | |
| HMM_PFN_ERROR, | |
| HMM_PFN_NONE, | |
| HMM_PFN_SPECIAL, | |
| HMM_PFN_VALUE_MAX | |
| }; | |
| /* | |
| * struct hmm_range - track invalidation lock on virtual address range | |
| * | |
| * @notifier: a mmu_interval_notifier that includes the start/end | |
| * @notifier_seq: result of mmu_interval_read_begin() | |
| * @hmm: the core HMM structure this range is active against | |
| * @vma: the vm area struct for the range | |
| * @list: all range lock are on a list | |
| * @start: range virtual start address (inclusive) | |
| * @end: range virtual end address (exclusive) | |
| * @pfns: array of pfns (big enough for the range) | |
| * @flags: pfn flags to match device driver page table | |
| * @values: pfn value for some special case (none, special, error, ...) | |
| * @default_flags: default flags for the range (write, read, ... see hmm doc) | |
| * @pfn_flags_mask: allows to mask pfn flags so that only default_flags matter | |
| * @pfn_shifts: pfn shift value (should be <= PAGE_SHIFT) | |
| * @valid: pfns array did not change since it has been fill by an HMM function | |
| */ | |
| struct hmm_range { | |
| struct mmu_interval_notifier *notifier; | |
| unsigned long notifier_seq; | |
| unsigned long start; | |
| unsigned long end; | |
| uint64_t *pfns; | |
| const uint64_t *flags; | |
| const uint64_t *values; | |
| uint64_t default_flags; | |
| uint64_t pfn_flags_mask; | |
| uint8_t pfn_shift; | |
| }; | |
| /* | |
| * hmm_device_entry_to_page() - return struct page pointed to by a device entry | |
| * @range: range use to decode device entry value | |
| * @entry: device entry value to get corresponding struct page from | |
| * Return: struct page pointer if entry is a valid, NULL otherwise | |
| * | |
| * If the device entry is valid (ie valid flag set) then return the struct page | |
| * matching the entry value. Otherwise return NULL. | |
| */ | |
| static inline struct page *hmm_device_entry_to_page(const struct hmm_range *range, | |
| uint64_t entry) | |
| { | |
| if (entry == range->values[HMM_PFN_NONE]) | |
| return NULL; | |
| if (entry == range->values[HMM_PFN_ERROR]) | |
| return NULL; | |
| if (entry == range->values[HMM_PFN_SPECIAL]) | |
| return NULL; | |
| if (!(entry & range->flags[HMM_PFN_VALID])) | |
| return NULL; | |
| return pfn_to_page(entry >> range->pfn_shift); | |
| } | |
| /* | |
| * hmm_device_entry_to_pfn() - return pfn value store in a device entry | |
| * @range: range use to decode device entry value | |
| * @entry: device entry to extract pfn from | |
| * Return: pfn value if device entry is valid, -1UL otherwise | |
| */ | |
| static inline unsigned long | |
| hmm_device_entry_to_pfn(const struct hmm_range *range, uint64_t pfn) | |
| { | |
| if (pfn == range->values[HMM_PFN_NONE]) | |
| return -1UL; | |
| if (pfn == range->values[HMM_PFN_ERROR]) | |
| return -1UL; | |
| if (pfn == range->values[HMM_PFN_SPECIAL]) | |
| return -1UL; | |
| if (!(pfn & range->flags[HMM_PFN_VALID])) | |
| return -1UL; | |
| return (pfn >> range->pfn_shift); | |
| } | |
| /* | |
| * hmm_device_entry_from_page() - create a valid device entry for a page | |
| * @range: range use to encode HMM pfn value | |
| * @page: page for which to create the device entry | |
| * Return: valid device entry for the page | |
| */ | |
| static inline uint64_t hmm_device_entry_from_page(const struct hmm_range *range, | |
| struct page *page) | |
| { | |
| return (page_to_pfn(page) << range->pfn_shift) | | |
| range->flags[HMM_PFN_VALID]; | |
| } | |
| /* | |
| * hmm_device_entry_from_pfn() - create a valid device entry value from pfn | |
| * @range: range use to encode HMM pfn value | |
| * @pfn: pfn value for which to create the device entry | |
| * Return: valid device entry for the pfn | |
| */ | |
| static inline uint64_t hmm_device_entry_from_pfn(const struct hmm_range *range, | |
| unsigned long pfn) | |
| { | |
| return (pfn << range->pfn_shift) | | |
| range->flags[HMM_PFN_VALID]; | |
| } | |
| /* | |
| * Retry fault if non-blocking, drop mmap_sem and return -EAGAIN in that case. | |
| */ | |
| #define HMM_FAULT_ALLOW_RETRY (1 << 0) | |
| /* Don't fault in missing PTEs, just snapshot the current state. */ | |
| #define HMM_FAULT_SNAPSHOT (1 << 1) | |
| #ifdef CONFIG_HMM_MIRROR | |
| /* | |
| * Please see Documentation/vm/hmm.rst for how to use the range API. | |
| */ | |
| long hmm_range_fault(struct hmm_range *range, unsigned int flags); | |
| #else | |
| static inline long hmm_range_fault(struct hmm_range *range, unsigned int flags) | |
| { | |
| return -EOPNOTSUPP; | |
| } | |
| #endif | |
| /* | |
| * HMM_RANGE_DEFAULT_TIMEOUT - default timeout (ms) when waiting for a range | |
| * | |
| * When waiting for mmu notifiers we need some kind of time out otherwise we | |
| * could potentialy wait for ever, 1000ms ie 1s sounds like a long time to | |
| * wait already. | |
| */ | |
| #define HMM_RANGE_DEFAULT_TIMEOUT 1000 | |
| #endif /* LINUX_HMM_H */ |