blob: cbef5ee4c459104a7bc54e809821e20797e47724 [file] [log] [blame]
/*
* seq_buf.c
*
* Copyright (C) 2014 Red Hat Inc, Steven Rostedt <srostedt@redhat.com>
*
* The seq_buf is a handy tool that allows you to pass a descriptor around
* to a buffer that other functions can write to. It is similar to the
* seq_file functionality but has some differences.
*
* To use it, the seq_buf must be initialized with seq_buf_init().
* This will set up the counters within the descriptor. You can call
* seq_buf_init() more than once to reset the seq_buf to start
* from scratch.
*/
#include <linux/uaccess.h>
#include <linux/seq_file.h>
#include <linux/seq_buf.h>
/**
* seq_buf_can_fit - can the new data fit in the current buffer?
* @s: the seq_buf descriptor
* @len: The length to see if it can fit in the current buffer
*
* Returns true if there's enough unused space in the seq_buf buffer
* to fit the amount of new data according to @len.
*/
static bool seq_buf_can_fit(struct seq_buf *s, size_t len)
{
return s->len + len <= s->size;
}
/**
* seq_buf_print_seq - move the contents of seq_buf into a seq_file
* @m: the seq_file descriptor that is the destination
* @s: the seq_buf descriptor that is the source.
*
* Returns zero on success, non zero otherwise
*/
int seq_buf_print_seq(struct seq_file *m, struct seq_buf *s)
{
unsigned int len = seq_buf_used(s);
return seq_write(m, s->buffer, len);
}
/**
* seq_buf_vprintf - sequence printing of information.
* @s: seq_buf descriptor
* @fmt: printf format string
* @args: va_list of arguments from a printf() type function
*
* Writes a vnprintf() format into the sequencce buffer.
*
* Returns zero on success, -1 on overflow.
*/
int seq_buf_vprintf(struct seq_buf *s, const char *fmt, va_list args)
{
int len;
WARN_ON(s->size == 0);
if (s->len < s->size) {
len = vsnprintf(s->buffer + s->len, s->size - s->len, fmt, args);
if (s->len + len < s->size) {
s->len += len;
return 0;
}
}
seq_buf_set_overflow(s);
return -1;
}
/**
* seq_buf_printf - sequence printing of information
* @s: seq_buf descriptor
* @fmt: printf format string
*
* Writes a printf() format into the sequence buffer.
*
* Returns zero on success, -1 on overflow.
*/
int seq_buf_printf(struct seq_buf *s, const char *fmt, ...)
{
va_list ap;
int ret;
va_start(ap, fmt);
ret = seq_buf_vprintf(s, fmt, ap);
va_end(ap);
return ret;
}
#ifdef CONFIG_BINARY_PRINTF
/**
* seq_buf_bprintf - Write the printf string from binary arguments
* @s: seq_buf descriptor
* @fmt: The format string for the @binary arguments
* @binary: The binary arguments for @fmt.
*
* When recording in a fast path, a printf may be recorded with just
* saving the format and the arguments as they were passed to the
* function, instead of wasting cycles converting the arguments into
* ASCII characters. Instead, the arguments are saved in a 32 bit
* word array that is defined by the format string constraints.
*
* This function will take the format and the binary array and finish
* the conversion into the ASCII string within the buffer.
*
* Returns zero on success, -1 on overflow.
*/
int seq_buf_bprintf(struct seq_buf *s, const char *fmt, const u32 *binary)
{
unsigned int len = seq_buf_buffer_left(s);
int ret;
WARN_ON(s->size == 0);
if (s->len < s->size) {
ret = bstr_printf(s->buffer + s->len, len, fmt, binary);
if (s->len + ret < s->size) {
s->len += ret;
return 0;
}
}
seq_buf_set_overflow(s);
return -1;
}
#endif /* CONFIG_BINARY_PRINTF */
/**
* seq_buf_puts - sequence printing of simple string
* @s: seq_buf descriptor
* @str: simple string to record
*
* Copy a simple string into the sequence buffer.
*
* Returns zero on success, -1 on overflow
*/
int seq_buf_puts(struct seq_buf *s, const char *str)
{
unsigned int len = strlen(str);
WARN_ON(s->size == 0);
/* Add 1 to len for the trailing null byte which must be there */
len += 1;
if (seq_buf_can_fit(s, len)) {
memcpy(s->buffer + s->len, str, len);
/* Don't count the trailing null byte against the capacity */
s->len += len - 1;
return 0;
}
seq_buf_set_overflow(s);
return -1;
}
/**
* seq_buf_putc - sequence printing of simple character
* @s: seq_buf descriptor
* @c: simple character to record
*
* Copy a single character into the sequence buffer.
*
* Returns zero on success, -1 on overflow
*/
int seq_buf_putc(struct seq_buf *s, unsigned char c)
{
WARN_ON(s->size == 0);
if (seq_buf_can_fit(s, 1)) {
s->buffer[s->len++] = c;
return 0;
}
seq_buf_set_overflow(s);
return -1;
}
/**
* seq_buf_putmem - write raw data into the sequenc buffer
* @s: seq_buf descriptor
* @mem: The raw memory to copy into the buffer
* @len: The length of the raw memory to copy (in bytes)
*
* There may be cases where raw memory needs to be written into the
* buffer and a strcpy() would not work. Using this function allows
* for such cases.
*
* Returns zero on success, -1 on overflow
*/
int seq_buf_putmem(struct seq_buf *s, const void *mem, unsigned int len)
{
WARN_ON(s->size == 0);
if (seq_buf_can_fit(s, len)) {
memcpy(s->buffer + s->len, mem, len);
s->len += len;
return 0;
}
seq_buf_set_overflow(s);
return -1;
}
#define MAX_MEMHEX_BYTES 8U
#define HEX_CHARS (MAX_MEMHEX_BYTES*2 + 1)
/**
* seq_buf_putmem_hex - write raw memory into the buffer in ASCII hex
* @s: seq_buf descriptor
* @mem: The raw memory to write its hex ASCII representation of
* @len: The length of the raw memory to copy (in bytes)
*
* This is similar to seq_buf_putmem() except instead of just copying the
* raw memory into the buffer it writes its ASCII representation of it
* in hex characters.
*
* Returns zero on success, -1 on overflow
*/
int seq_buf_putmem_hex(struct seq_buf *s, const void *mem,
unsigned int len)
{
unsigned char hex[HEX_CHARS];
const unsigned char *data = mem;
unsigned int start_len;
int i, j;
WARN_ON(s->size == 0);
while (len) {
start_len = min(len, HEX_CHARS - 1);
#ifdef __BIG_ENDIAN
for (i = 0, j = 0; i < start_len; i++) {
#else
for (i = start_len-1, j = 0; i >= 0; i--) {
#endif
hex[j++] = hex_asc_hi(data[i]);
hex[j++] = hex_asc_lo(data[i]);
}
if (WARN_ON_ONCE(j == 0 || j/2 > len))
break;
/* j increments twice per loop */
len -= j / 2;
hex[j++] = ' ';
seq_buf_putmem(s, hex, j);
if (seq_buf_has_overflowed(s))
return -1;
}
return 0;
}
/**
* seq_buf_path - copy a path into the sequence buffer
* @s: seq_buf descriptor
* @path: path to write into the sequence buffer.
* @esc: set of characters to escape in the output
*
* Write a path name into the sequence buffer.
*
* Returns the number of written bytes on success, -1 on overflow
*/
int seq_buf_path(struct seq_buf *s, const struct path *path, const char *esc)
{
char *buf;
size_t size = seq_buf_get_buf(s, &buf);
int res = -1;
WARN_ON(s->size == 0);
if (size) {
char *p = d_path(path, buf, size);
if (!IS_ERR(p)) {
char *end = mangle_path(buf, p, esc);
if (end)
res = end - buf;
}
}
seq_buf_commit(s, res);
return res;
}
/**
* seq_buf_to_user - copy the squence buffer to user space
* @s: seq_buf descriptor
* @ubuf: The userspace memory location to copy to
* @cnt: The amount to copy
*
* Copies the sequence buffer into the userspace memory pointed to
* by @ubuf. It starts from the last read position (@s->readpos)
* and writes up to @cnt characters or till it reaches the end of
* the content in the buffer (@s->len), which ever comes first.
*
* On success, it returns a positive number of the number of bytes
* it copied.
*
* On failure it returns -EBUSY if all of the content in the
* sequence has been already read, which includes nothing in the
* sequence (@s->len == @s->readpos).
*
* Returns -EFAULT if the copy to userspace fails.
*/
int seq_buf_to_user(struct seq_buf *s, char __user *ubuf, int cnt)
{
int len;
int ret;
if (!cnt)
return 0;
if (s->len <= s->readpos)
return -EBUSY;
len = seq_buf_used(s) - s->readpos;
if (cnt > len)
cnt = len;
ret = copy_to_user(ubuf, s->buffer + s->readpos, cnt);
if (ret == cnt)
return -EFAULT;
cnt -= ret;
s->readpos += cnt;
return cnt;
}