blob: d0d39f150fabf845d33a5ecff9c1d2687d387bb3 [file] [log] [blame]
/*
* Device Tree support for Armada 370 and XP platforms.
*
* Copyright (C) 2012 Marvell
*
* Lior Amsalem <alior@marvell.com>
* Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk-provider.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
#include <linux/mbus.h>
#include <linux/signal.h>
#include <linux/slab.h>
#include <linux/irqchip.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/smp_scu.h>
#include "armada-370-xp.h"
#include "common.h"
#include "coherency.h"
#include "mvebu-soc-id.h"
static void __iomem *scu_base;
/*
* Enables the SCU when available. Obviously, this is only useful on
* Cortex-A based SOCs, not on PJ4B based ones.
*/
static void __init mvebu_scu_enable(void)
{
struct device_node *np =
of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
if (np) {
scu_base = of_iomap(np, 0);
scu_enable(scu_base);
of_node_put(np);
}
}
void __iomem *mvebu_get_scu_base(void)
{
return scu_base;
}
/*
* Early versions of Armada 375 SoC have a bug where the BootROM
* leaves an external data abort pending. The kernel is hit by this
* data abort as soon as it enters userspace, because it unmasks the
* data aborts at this moment. We register a custom abort handler
* below to ignore the first data abort to work around this
* problem.
*/
static int armada_375_external_abort_wa(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
static int ignore_first;
if (!ignore_first && fsr == 0x1406) {
ignore_first = 1;
return 0;
}
return 1;
}
static void __init mvebu_init_irq(void)
{
irqchip_init();
mvebu_scu_enable();
coherency_init();
BUG_ON(mvebu_mbus_dt_init(coherency_available()));
}
static void __init external_abort_quirk(void)
{
u32 dev, rev;
if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV)
return;
hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0,
"imprecise external abort");
}
static void __init i2c_quirk(void)
{
struct device_node *np;
u32 dev, rev;
/*
* Only revisons more recent than A0 support the offload
* mechanism. We can exit only if we are sure that we can
* get the SoC revision and it is more recent than A0.
*/
if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > MV78XX0_A0_REV)
return;
for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") {
struct property *new_compat;
new_compat = kzalloc(sizeof(*new_compat), GFP_KERNEL);
new_compat->name = kstrdup("compatible", GFP_KERNEL);
new_compat->length = sizeof("marvell,mv78230-a0-i2c");
new_compat->value = kstrdup("marvell,mv78230-a0-i2c",
GFP_KERNEL);
of_update_property(np, new_compat);
}
return;
}
#define A375_Z1_THERMAL_FIXUP_OFFSET 0xc
static void __init thermal_quirk(void)
{
struct device_node *np;
u32 dev, rev;
int res;
/*
* The early SoC Z1 revision needs a quirk to be applied in order
* for the thermal controller to work properly. This quirk breaks
* the thermal support if applied on a SoC that doesn't need it,
* so we enforce the SoC revision to be known.
*/
res = mvebu_get_soc_id(&dev, &rev);
if (res < 0 || (res == 0 && rev > ARMADA_375_Z1_REV))
return;
for_each_compatible_node(np, NULL, "marvell,armada375-thermal") {
struct property *prop;
__be32 newval, *newprop, *oldprop;
int len;
/*
* The register offset is at a wrong location. This quirk
* creates a new reg property as a clone of the previous
* one and corrects the offset.
*/
oldprop = (__be32 *)of_get_property(np, "reg", &len);
if (!oldprop)
continue;
/* Create a duplicate of the 'reg' property */
prop = kzalloc(sizeof(*prop), GFP_KERNEL);
prop->length = len;
prop->name = kstrdup("reg", GFP_KERNEL);
prop->value = kzalloc(len, GFP_KERNEL);
memcpy(prop->value, oldprop, len);
/* Fixup the register offset of the second entry */
oldprop += 2;
newprop = (__be32 *)prop->value + 2;
newval = cpu_to_be32(be32_to_cpu(*oldprop) -
A375_Z1_THERMAL_FIXUP_OFFSET);
*newprop = newval;
of_update_property(np, prop);
/*
* The thermal controller needs some quirk too, so let's change
* the compatible string to reflect this and allow the driver
* the take the necessary action.
*/
prop = kzalloc(sizeof(*prop), GFP_KERNEL);
prop->name = kstrdup("compatible", GFP_KERNEL);
prop->length = sizeof("marvell,armada375-z1-thermal");
prop->value = kstrdup("marvell,armada375-z1-thermal",
GFP_KERNEL);
of_update_property(np, prop);
}
return;
}
static void __init mvebu_dt_init(void)
{
if (of_machine_is_compatible("marvell,armadaxp"))
i2c_quirk();
if (of_machine_is_compatible("marvell,a375-db")) {
external_abort_quirk();
thermal_quirk();
}
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char * const armada_370_xp_dt_compat[] = {
"marvell,armada-370-xp",
NULL,
};
DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
.smp = smp_ops(armada_xp_smp_ops),
.init_machine = mvebu_dt_init,
.init_irq = mvebu_init_irq,
.restart = mvebu_restart,
.dt_compat = armada_370_xp_dt_compat,
MACHINE_END
static const char * const armada_375_dt_compat[] = {
"marvell,armada375",
NULL,
};
DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
.init_irq = mvebu_init_irq,
.init_machine = mvebu_dt_init,
.restart = mvebu_restart,
.dt_compat = armada_375_dt_compat,
MACHINE_END
static const char * const armada_38x_dt_compat[] = {
"marvell,armada380",
"marvell,armada385",
NULL,
};
DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
.init_irq = mvebu_init_irq,
.restart = mvebu_restart,
.dt_compat = armada_38x_dt_compat,
MACHINE_END