blob: c00585d915bc37840eeffc0283716d81e3f98f56 [file] [log] [blame]
/*
* Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
* Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2006 Michael Buesch <m@bues.ch>
* Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
* Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "bcm47xx_private.h"
#include <linux/export.h>
#include <linux/types.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <linux/bcma/bcma_soc.h>
#include <asm/bootinfo.h>
#include <asm/idle.h>
#include <asm/prom.h>
#include <asm/reboot.h>
#include <asm/time.h>
#include <bcm47xx.h>
#include <bcm47xx_nvram.h>
#include <bcm47xx_board.h>
union bcm47xx_bus bcm47xx_bus;
EXPORT_SYMBOL(bcm47xx_bus);
enum bcm47xx_bus_type bcm47xx_bus_type;
EXPORT_SYMBOL(bcm47xx_bus_type);
static void bcm47xx_machine_restart(char *command)
{
printk(KERN_ALERT "Please stand by while rebooting the system...\n");
local_irq_disable();
/* Set the watchdog timer to reset immediately */
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
if (bcm47xx_bus.ssb.chip_id == 0x4785)
write_c0_diag4(1 << 22);
ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
if (bcm47xx_bus.ssb.chip_id == 0x4785) {
__asm__ __volatile__(
".set\tmips3\n\t"
"sync\n\t"
"wait\n\t"
".set\tmips0");
}
break;
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1);
break;
#endif
}
while (1)
cpu_relax();
}
static void bcm47xx_machine_halt(void)
{
/* Disable interrupts and watchdog and spin forever */
local_irq_disable();
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
break;
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
break;
#endif
}
while (1)
cpu_relax();
}
#ifdef CONFIG_BCM47XX_SSB
static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
{
char prefix[10];
if (bus->bustype == SSB_BUSTYPE_PCI) {
memset(out, 0, sizeof(struct ssb_sprom));
snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
bus->host_pci->bus->number + 1,
PCI_SLOT(bus->host_pci->devfn));
bcm47xx_fill_sprom(out, prefix, false);
return 0;
} else {
printk(KERN_WARNING "bcm47xx: unable to fill SPROM for given bustype.\n");
return -EINVAL;
}
}
static int bcm47xx_get_invariants(struct ssb_bus *bus,
struct ssb_init_invariants *iv)
{
char buf[20];
/* Fill boardinfo structure */
memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
bcm47xx_fill_ssb_boardinfo(&iv->boardinfo, NULL);
memset(&iv->sprom, 0, sizeof(struct ssb_sprom));
bcm47xx_fill_sprom(&iv->sprom, NULL, false);
if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
return 0;
}
static void __init bcm47xx_register_ssb(void)
{
int err;
char buf[100];
struct ssb_mipscore *mcore;
err = ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb);
if (err)
printk(KERN_WARNING "bcm47xx: someone else already registered"
" a ssb SPROM callback handler (err %d)\n", err);
err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE,
bcm47xx_get_invariants);
if (err)
panic("Failed to initialize SSB bus (err %d)", err);
mcore = &bcm47xx_bus.ssb.mipscore;
if (bcm47xx_nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
if (strstr(buf, "console=ttyS1")) {
struct ssb_serial_port port;
printk(KERN_DEBUG "Swapping serial ports!\n");
/* swap serial ports */
memcpy(&port, &mcore->serial_ports[0], sizeof(port));
memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
sizeof(port));
memcpy(&mcore->serial_ports[1], &port, sizeof(port));
}
}
}
#endif
#ifdef CONFIG_BCM47XX_BCMA
static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
{
char prefix[10];
struct bcma_device *core;
switch (bus->hosttype) {
case BCMA_HOSTTYPE_PCI:
memset(out, 0, sizeof(struct ssb_sprom));
snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
bus->host_pci->bus->number + 1,
PCI_SLOT(bus->host_pci->devfn));
bcm47xx_fill_sprom(out, prefix, false);
return 0;
case BCMA_HOSTTYPE_SOC:
memset(out, 0, sizeof(struct ssb_sprom));
core = bcma_find_core(bus, BCMA_CORE_80211);
if (core) {
snprintf(prefix, sizeof(prefix), "sb/%u/",
core->core_index);
bcm47xx_fill_sprom(out, prefix, true);
} else {
bcm47xx_fill_sprom(out, NULL, false);
}
return 0;
default:
pr_warn("bcm47xx: unable to fill SPROM for given bustype.\n");
return -EINVAL;
}
}
static void __init bcm47xx_register_bcma(void)
{
int err;
err = bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma);
if (err)
pr_warn("bcm47xx: someone else already registered a bcma SPROM callback handler (err %d)\n", err);
err = bcma_host_soc_register(&bcm47xx_bus.bcma);
if (err)
panic("Failed to register BCMA bus (err %d)", err);
err = bcma_host_soc_init(&bcm47xx_bus.bcma);
if (err)
panic("Failed to initialize BCMA bus (err %d)", err);
bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, NULL);
}
#endif
void __init plat_mem_setup(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
if ((c->cputype == CPU_74K) || (c->cputype == CPU_1074K)) {
printk(KERN_INFO "bcm47xx: using bcma bus\n");
#ifdef CONFIG_BCM47XX_BCMA
bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
bcm47xx_register_bcma();
bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
#ifdef CONFIG_HIGHMEM
bcm47xx_prom_highmem_init();
#endif
#endif
} else {
printk(KERN_INFO "bcm47xx: using ssb bus\n");
#ifdef CONFIG_BCM47XX_SSB
bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
bcm47xx_register_ssb();
bcm47xx_set_system_type(bcm47xx_bus.ssb.chip_id);
#endif
}
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
bcm47xx_board_detect();
mips_set_machine_name(bcm47xx_board_get_name());
}
static int __init bcm47xx_cpu_fixes(void)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
/* Nothing to do */
break;
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
/* The BCM4706 has a problem with the CPU wait instruction.
* When r4k_wait or r4k_wait_irqoff is used will just hang and
* not return from a msleep(). Removing the cpu_wait
* functionality is a workaround for this problem. The BCM4716
* does not have this problem.
*/
if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706)
cpu_wait = NULL;
break;
#endif
}
return 0;
}
arch_initcall(bcm47xx_cpu_fixes);
static struct fixed_phy_status bcm47xx_fixed_phy_status __initdata = {
.link = 1,
.speed = SPEED_100,
.duplex = DUPLEX_FULL,
};
static int __init bcm47xx_register_bus_complete(void)
{
switch (bcm47xx_bus_type) {
#ifdef CONFIG_BCM47XX_SSB
case BCM47XX_BUS_TYPE_SSB:
/* Nothing to do */
break;
#endif
#ifdef CONFIG_BCM47XX_BCMA
case BCM47XX_BUS_TYPE_BCMA:
bcma_bus_register(&bcm47xx_bus.bcma.bus);
break;
#endif
}
bcm47xx_buttons_register();
bcm47xx_leds_register();
bcm47xx_workarounds();
fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
return 0;
}
device_initcall(bcm47xx_register_bus_complete);