blob: 48c0cc4aa9705399c9003925e7ab04272ffb34d4 [file] [log] [blame]
config GKI_HIDDEN_DRM_CONFIGS
bool "Hidden DRM configs needed for GKI"
select DRM_KMS_HELPER if (HAS_IOMEM && DRM)
select DRM_GEM_CMA_HELPER
select DRM_KMS_CMA_HELPER
select DRM_MIPI_DSI
select DRM_TTM if (HAS_IOMEM && DRM)
select VIDEOMODE_HELPERS
select WANT_DEV_COREDUMP
select INTERVAL_TREE
help
Dummy config option used to enable hidden DRM configs.
These are normally selected implicitly when including a
DRM module, but for GKI, the modules are built out-of-tree.
config GKI_HIDDEN_REGMAP_CONFIGS
bool "Hidden Regmap configs needed for GKI"
select REGMAP_IRQ
select REGMAP_MMIO
help
Dummy config option used to enable hidden regmap configs.
These are normally selected implicitly when a module
that relies on it is configured.
config GKI_HIDDEN_CRYPTO_CONFIGS
bool "Hidden CRYPTO configs needed for GKI"
select CRYPTO_ENGINE
help
Dummy config option used to enable hidden CRYPTO configs.
These are normally selected implicitly when a module
that relies on it is configured.
config GKI_HIDDEN_SND_CONFIGS
bool "Hidden SND configs needed for GKI"
select SND_VMASTER
select SND_PCM_ELD
select SND_JACK
select SND_JACK_INPUT_DEV
help
Dummy config option used to enable hidden SND configs.
These are normally selected implicitly when a module
that relies on it is configured.
config GKI_HIDDEN_SND_SOC_CONFIGS
bool "Hidden SND_SOC configs needed for GKI"
select SND_SOC_GENERIC_DMAENGINE_PCM if (SND_SOC && SND)
select SND_PCM_IEC958
select SND_SOC_COMPRESS if (SND_SOC && SND)
select SND_SOC_TOPOLOGY if (SND_SOC && SND)
select DMA_VIRTUAL_CHANNELS
help
Dummy config option used to enable hidden SND_SOC configs.
These are normally selected implicitly when a module
that relies on it is configured.
config GKI_HIDDEN_MMC_CONFIGS
bool "Hidden MMC configs needed for GKI"
select MMC_SDHCI_IO_ACCESSORS if (MMC_SDHCI)
help
Dummy config option used to enable hidden MMC configs.
These are normally selected implicitly when a module
that relies on it is configured.
config GKI_HIDDEN_GPIO_CONFIGS
bool "Hidden GPIO configs needed for GKI"
select PINCTRL_SINGLE if (PINCTRL && OF && HAS_IOMEM)
select GPIO_PL061 if (HAS_IOMEM && ARM_AMBA && GPIOLIB)
help
Dummy config option used to enable hidden GPIO configs.
These are normally selected implicitly when a module
that relies on it is configured.
config GKI_HIDDEN_QCOM_CONFIGS
bool "Hidden QCOM configs needed for GKI"
select QCOM_SMEM_STATE
select QCOM_GDSC if (ARCH_QCOM)
select IOMMU_IO_PGTABLE_LPAE if (ARCH_QCOM)
help
Dummy config option used to enable hidden QCOM configs.
These are normally selected implicitly when a module
that relies on it is configured.
config GKI_HIDDEN_MEDIA_CONFIGS
bool "Hidden Media configs needed for GKI"
select VIDEOBUF2_CORE
select MEDIA_SUPPORT
select FRAME_VECTOR
select VIDEOBUF2_DMA_CONTIG
select CEC_CORE
select CEC_NOTIFIER
select CEC_PIN
help
Dummy config option used to enable hidden media configs.
These are normally selected implicitly when a module
that relies on it is configured.
config GKI_HIDDEN_VIRTUAL_CONFIGS
bool "Hidden Virtual configs needed for GKI"
select HVC_DRIVER
help
Dummy config option used to enable hidden virtual device configs.
These are normally selected implicitly when a module
that relies on it is configured.
# LEGACY_WEXT_ALLCONFIG Discussed upstream, soundly rejected as a unique
# problem for GKI to solve. It should be noted that these extensions are
# in-effect deprecated and generally unsupported and we should pressure
# the SOC vendors to drop any modules that require these extensions.
config GKI_LEGACY_WEXT_ALLCONFIG
bool "Hidden wireless extension configs needed for GKI"
select WIRELESS_EXT
select WEXT_CORE
select WEXT_PROC
select WEXT_SPY
select WEXT_PRIV
help
Placeholder config option used to enable all the hidden legacy
wireless extensions to the core wireless network functionality used
by add-in modules. If you are not building a kernel to be used for
a variety of out-of-kernel built wireless modules, say N here.
config GKI_HIDDEN_USB_CONFIGS
bool "Hiddel USB configurations needed for GKI"
select USB_PHY
help
Dummy config option used to enable all USB related hidden configs.
These configurations are usually only selected by another config
option or a combination of them.
If you are not building a kernel to be used for a variety of
out-of-kernel build USB drivers, say N here.
config GKI_HIDDEN_SOC_BUS_CONFIGS
bool "Hidden SoC bus configuration needed for GKI"
select SOC_BUS
help
Dummy config option used to enable SOC_BUS hidden Kconfig.
The configuration is required for SoCs to register themselves to the bus.
If you are not building a kernel to be used for a variety of SoCs and
out-of-tree drivers, say N here.
config GKI_HIDDEN_RPMSG_CONFIGS
bool "Hidden RPMSG configuration needed for GKI"
select RPMSG
help
Dummy config option used to enable the hidden RPMSG config.
This configuration is usually only selected by another config
option or a combination of them.
If you are not building a kernel to be used for a variety of
out-of-kernel build RPMSG drivers, say N here.
config GKI_HIDDEN_GPU_CONFIGS
bool "Hidden GPU configuration needed for GKI"
select TRACE_GPU_MEM
help
Dummy config option used to enable the hidden GPU config.
These are normally selected implicitly when a module
that relies on it is configured.
config GKI_HIDDEN_IRQ_CONFIGS
bool "Hidden IRQ configuration needed for GKI"
select GENERIC_IRQ_CHIP
help
Dummy config option used to enable GENERIC_IRQ_CHIP hidden
config, required by various SoC platforms. This is usually
selected by ARCH_*.
config GKI_HIDDEN_HYPERVISOR_CONFIGS
bool "Hidden hypervisor configuration needed for GKI"
select SYS_HYPERVISOR
help
Dummy config option used to enable the SYS_HYPERVISOR hidden
config, required by various SoC platforms. This is usually
selected by XEN or S390.
# Atrocities needed for
# a) building GKI modules in separate tree, or
# b) building drivers that are not modularizable
#
# All of these should be reworked into an upstream solution
# if possible.
#
config GKI_HACKS_TO_FIX
bool "GKI Dummy config options"
select GKI_HIDDEN_CRYPTO_CONFIGS
select GKI_HIDDEN_DRM_CONFIGS
select GKI_HIDDEN_REGMAP_CONFIGS
select GKI_HIDDEN_SND_CONFIGS
select GKI_HIDDEN_SND_SOC_CONFIGS
select GKI_HIDDEN_MMC_CONFIGS
select GKI_HIDDEN_GPIO_CONFIGS
select GKI_HIDDEN_QCOM_CONFIGS
select GKI_LEGACY_WEXT_ALLCONFIG
select GKI_HIDDEN_MEDIA_CONFIGS
select GKI_HIDDEN_VIRTUAL_CONFIGS
select GKI_HIDDEN_USB_CONFIGS
select GKI_HIDDEN_SOC_BUS_CONFIGS
select GKI_HIDDEN_RPMSG_CONFIGS
select GKI_HIDDEN_GPU_CONFIGS
select GKI_HIDDEN_IRQ_CONFIGS
select GKI_HIDDEN_HYPERVISOR_CONFIGS
help
Dummy config option used to enable core functionality used by
modules that may not be selectable in this config.
Unless you are building a GKI kernel to be used with modules
built from a different config, say N here.
config GKI_OPT_FEATURES
bool "Optional GKI features"
help
Config option that should be enabled in GKI kernels to allow optional
GKI features be enabled or disabled without ABI breakage.
If you are not building a GKI kernel, say N here.