blob: 3b99882692e346efea93262ef97de49619867586 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Marvell 10G 88x3310 PHY driver
*
* Based upon the ID registers, this PHY appears to be a mixture of IPs
* from two different companies.
*
* There appears to be several different data paths through the PHY which
* are automatically managed by the PHY. The following has been determined
* via observation and experimentation for a setup using single-lane Serdes:
*
* SGMII PHYXS -- BASE-T PCS -- 10G PMA -- AN -- Copper (for <= 1G)
* 10GBASE-KR PHYXS -- BASE-T PCS -- 10G PMA -- AN -- Copper (for 10G)
* 10GBASE-KR PHYXS -- BASE-R PCS -- Fiber
*
* With XAUI, observation shows:
*
* XAUI PHYXS -- <appropriate PCS as above>
*
* and no switching of the host interface mode occurs.
*
* If both the fiber and copper ports are connected, the first to gain
* link takes priority and the other port is completely locked out.
*/
#include <linux/ctype.h>
#include <linux/hwmon.h>
#include <linux/marvell_phy.h>
#include <linux/phy.h>
#define MV_PHY_ALASKA_NBT_QUIRK_MASK 0xfffffffe
#define MV_PHY_ALASKA_NBT_QUIRK_REV (MARVELL_PHY_ID_88X3310 | 0xa)
enum {
MV_PMA_BOOT = 0xc050,
MV_PMA_BOOT_FATAL = BIT(0),
MV_PCS_BASE_T = 0x0000,
MV_PCS_BASE_R = 0x1000,
MV_PCS_1000BASEX = 0x2000,
MV_PCS_PAIRSWAP = 0x8182,
MV_PCS_PAIRSWAP_MASK = 0x0003,
MV_PCS_PAIRSWAP_AB = 0x0002,
MV_PCS_PAIRSWAP_NONE = 0x0003,
/* These registers appear at 0x800X and 0xa00X - the 0xa00X control
* registers appear to set themselves to the 0x800X when AN is
* restarted, but status registers appear readable from either.
*/
MV_AN_CTRL1000 = 0x8000, /* 1000base-T control register */
MV_AN_STAT1000 = 0x8001, /* 1000base-T status register */
/* Vendor2 MMD registers */
MV_V2_PORT_CTRL = 0xf001,
MV_V2_PORT_CTRL_PWRDOWN = 0x0800,
MV_V2_TEMP_CTRL = 0xf08a,
MV_V2_TEMP_CTRL_MASK = 0xc000,
MV_V2_TEMP_CTRL_SAMPLE = 0x0000,
MV_V2_TEMP_CTRL_DISABLE = 0xc000,
MV_V2_TEMP = 0xf08c,
MV_V2_TEMP_UNKNOWN = 0x9600, /* unknown function */
};
struct mv3310_priv {
struct device *hwmon_dev;
char *hwmon_name;
};
#ifdef CONFIG_HWMON
static umode_t mv3310_hwmon_is_visible(const void *data,
enum hwmon_sensor_types type,
u32 attr, int channel)
{
if (type == hwmon_chip && attr == hwmon_chip_update_interval)
return 0444;
if (type == hwmon_temp && attr == hwmon_temp_input)
return 0444;
return 0;
}
static int mv3310_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *value)
{
struct phy_device *phydev = dev_get_drvdata(dev);
int temp;
if (type == hwmon_chip && attr == hwmon_chip_update_interval) {
*value = MSEC_PER_SEC;
return 0;
}
if (type == hwmon_temp && attr == hwmon_temp_input) {
temp = phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP);
if (temp < 0)
return temp;
*value = ((temp & 0xff) - 75) * 1000;
return 0;
}
return -EOPNOTSUPP;
}
static const struct hwmon_ops mv3310_hwmon_ops = {
.is_visible = mv3310_hwmon_is_visible,
.read = mv3310_hwmon_read,
};
static u32 mv3310_hwmon_chip_config[] = {
HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL,
0,
};
static const struct hwmon_channel_info mv3310_hwmon_chip = {
.type = hwmon_chip,
.config = mv3310_hwmon_chip_config,
};
static u32 mv3310_hwmon_temp_config[] = {
HWMON_T_INPUT,
0,
};
static const struct hwmon_channel_info mv3310_hwmon_temp = {
.type = hwmon_temp,
.config = mv3310_hwmon_temp_config,
};
static const struct hwmon_channel_info *mv3310_hwmon_info[] = {
&mv3310_hwmon_chip,
&mv3310_hwmon_temp,
NULL,
};
static const struct hwmon_chip_info mv3310_hwmon_chip_info = {
.ops = &mv3310_hwmon_ops,
.info = mv3310_hwmon_info,
};
static int mv3310_hwmon_config(struct phy_device *phydev, bool enable)
{
u16 val;
int ret;
ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP,
MV_V2_TEMP_UNKNOWN);
if (ret < 0)
return ret;
val = enable ? MV_V2_TEMP_CTRL_SAMPLE : MV_V2_TEMP_CTRL_DISABLE;
return phy_modify_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP_CTRL,
MV_V2_TEMP_CTRL_MASK, val);
}
static void mv3310_hwmon_disable(void *data)
{
struct phy_device *phydev = data;
mv3310_hwmon_config(phydev, false);
}
static int mv3310_hwmon_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
int i, j, ret;
priv->hwmon_name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL);
if (!priv->hwmon_name)
return -ENODEV;
for (i = j = 0; priv->hwmon_name[i]; i++) {
if (isalnum(priv->hwmon_name[i])) {
if (i != j)
priv->hwmon_name[j] = priv->hwmon_name[i];
j++;
}
}
priv->hwmon_name[j] = '\0';
ret = mv3310_hwmon_config(phydev, true);
if (ret)
return ret;
ret = devm_add_action_or_reset(dev, mv3310_hwmon_disable, phydev);
if (ret)
return ret;
priv->hwmon_dev = devm_hwmon_device_register_with_info(dev,
priv->hwmon_name, phydev,
&mv3310_hwmon_chip_info, NULL);
return PTR_ERR_OR_ZERO(priv->hwmon_dev);
}
#else
static inline int mv3310_hwmon_config(struct phy_device *phydev, bool enable)
{
return 0;
}
static int mv3310_hwmon_probe(struct phy_device *phydev)
{
return 0;
}
#endif
static int mv3310_probe(struct phy_device *phydev)
{
struct mv3310_priv *priv;
u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN;
int ret;
if (!phydev->is_c45 ||
(phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask)
return -ENODEV;
ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_BOOT);
if (ret < 0)
return ret;
if (ret & MV_PMA_BOOT_FATAL) {
dev_warn(&phydev->mdio.dev,
"PHY failed to boot firmware, status=%04x\n", ret);
return -ENODEV;
}
priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
dev_set_drvdata(&phydev->mdio.dev, priv);
ret = mv3310_hwmon_probe(phydev);
if (ret)
return ret;
return 0;
}
static int mv3310_suspend(struct phy_device *phydev)
{
return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
MV_V2_PORT_CTRL_PWRDOWN);
}
static int mv3310_resume(struct phy_device *phydev)
{
int ret;
ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
MV_V2_PORT_CTRL_PWRDOWN);
if (ret)
return ret;
return mv3310_hwmon_config(phydev, true);
}
/* Some PHYs in the Alaska family such as the 88X3310 and the 88E2010
* don't set bit 14 in PMA Extended Abilities (1.11), although they do
* support 2.5GBASET and 5GBASET. For these models, we can still read their
* 2.5G/5G extended abilities register (1.21). We detect these models based on
* the PMA device identifier, with a mask matching models known to have this
* issue
*/
static bool mv3310_has_pma_ngbaset_quirk(struct phy_device *phydev)
{
if (!(phydev->c45_ids.devices_in_package & MDIO_DEVS_PMAPMD))
return false;
/* Only some revisions of the 88X3310 family PMA seem to be impacted */
return (phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] &
MV_PHY_ALASKA_NBT_QUIRK_MASK) == MV_PHY_ALASKA_NBT_QUIRK_REV;
}
static int mv3310_config_init(struct phy_device *phydev)
{
/* Check that the PHY interface type is compatible */
if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
phydev->interface != PHY_INTERFACE_MODE_XAUI &&
phydev->interface != PHY_INTERFACE_MODE_RXAUI &&
phydev->interface != PHY_INTERFACE_MODE_10GKR)
return -ENODEV;
return 0;
}
static int mv3310_get_features(struct phy_device *phydev)
{
int ret, val;
ret = genphy_c45_pma_read_abilities(phydev);
if (ret)
return ret;
if (mv3310_has_pma_ngbaset_quirk(phydev)) {
val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD,
MDIO_PMA_NG_EXTABLE);
if (val < 0)
return val;
linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
phydev->supported,
val & MDIO_PMA_NG_EXTABLE_2_5GBT);
linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
phydev->supported,
val & MDIO_PMA_NG_EXTABLE_5GBT);
}
return 0;
}
static int mv3310_config_aneg(struct phy_device *phydev)
{
bool changed = false;
u16 reg;
int ret;
/* We don't support manual MDI control */
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
if (phydev->autoneg == AUTONEG_DISABLE)
return genphy_c45_pma_setup_forced(phydev);
ret = genphy_c45_an_config_aneg(phydev);
if (ret < 0)
return ret;
if (ret > 0)
changed = true;
/* Clause 45 has no standardized support for 1000BaseT, therefore
* use vendor registers for this mode.
*/
reg = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MV_AN_CTRL1000,
ADVERTISE_1000FULL | ADVERTISE_1000HALF, reg);
if (ret < 0)
return ret;
if (ret > 0)
changed = true;
return genphy_c45_check_and_restart_aneg(phydev, changed);
}
static int mv3310_aneg_done(struct phy_device *phydev)
{
int val;
val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_R + MDIO_STAT1);
if (val < 0)
return val;
if (val & MDIO_STAT1_LSTATUS)
return 1;
return genphy_c45_aneg_done(phydev);
}
static void mv3310_update_interface(struct phy_device *phydev)
{
if ((phydev->interface == PHY_INTERFACE_MODE_SGMII ||
phydev->interface == PHY_INTERFACE_MODE_2500BASEX ||
phydev->interface == PHY_INTERFACE_MODE_10GKR) && phydev->link) {
/* The PHY automatically switches its serdes interface (and
* active PHYXS instance) between Cisco SGMII, 10GBase-KR and
* 2500BaseX modes according to the speed. Florian suggests
* setting phydev->interface to communicate this to the MAC.
* Only do this if we are already in one of the above modes.
*/
switch (phydev->speed) {
case SPEED_10000:
phydev->interface = PHY_INTERFACE_MODE_10GKR;
break;
case SPEED_2500:
phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
break;
case SPEED_1000:
case SPEED_100:
case SPEED_10:
phydev->interface = PHY_INTERFACE_MODE_SGMII;
break;
default:
break;
}
}
}
/* 10GBASE-ER,LR,LRM,SR do not support autonegotiation. */
static int mv3310_read_10gbr_status(struct phy_device *phydev)
{
phydev->link = 1;
phydev->speed = SPEED_10000;
phydev->duplex = DUPLEX_FULL;
mv3310_update_interface(phydev);
return 0;
}
static int mv3310_read_status(struct phy_device *phydev)
{
int val;
phydev->speed = SPEED_UNKNOWN;
phydev->duplex = DUPLEX_UNKNOWN;
linkmode_zero(phydev->lp_advertising);
phydev->link = 0;
phydev->pause = 0;
phydev->asym_pause = 0;
phydev->mdix = 0;
val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_R + MDIO_STAT1);
if (val < 0)
return val;
if (val & MDIO_STAT1_LSTATUS)
return mv3310_read_10gbr_status(phydev);
val = genphy_c45_read_link(phydev);
if (val < 0)
return val;
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
if (val < 0)
return val;
if (val & MDIO_AN_STAT1_COMPLETE) {
val = genphy_c45_read_lpa(phydev);
if (val < 0)
return val;
/* Read the link partner's 1G advertisement */
val = phy_read_mmd(phydev, MDIO_MMD_AN, MV_AN_STAT1000);
if (val < 0)
return val;
mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, val);
if (phydev->autoneg == AUTONEG_ENABLE)
phy_resolve_aneg_linkmode(phydev);
}
if (phydev->autoneg != AUTONEG_ENABLE) {
val = genphy_c45_read_pma(phydev);
if (val < 0)
return val;
}
if (phydev->speed == SPEED_10000) {
val = genphy_c45_read_mdix(phydev);
if (val < 0)
return val;
} else {
val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_PAIRSWAP);
if (val < 0)
return val;
switch (val & MV_PCS_PAIRSWAP_MASK) {
case MV_PCS_PAIRSWAP_AB:
phydev->mdix = ETH_TP_MDI_X;
break;
case MV_PCS_PAIRSWAP_NONE:
phydev->mdix = ETH_TP_MDI;
break;
default:
phydev->mdix = ETH_TP_MDI_INVALID;
break;
}
}
mv3310_update_interface(phydev);
return 0;
}
static struct phy_driver mv3310_drivers[] = {
{
.phy_id = MARVELL_PHY_ID_88X3310,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "mv88x3310",
.get_features = mv3310_get_features,
.soft_reset = genphy_no_soft_reset,
.config_init = mv3310_config_init,
.probe = mv3310_probe,
.suspend = mv3310_suspend,
.resume = mv3310_resume,
.config_aneg = mv3310_config_aneg,
.aneg_done = mv3310_aneg_done,
.read_status = mv3310_read_status,
},
{
.phy_id = MARVELL_PHY_ID_88E2110,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "mv88x2110",
.probe = mv3310_probe,
.suspend = mv3310_suspend,
.resume = mv3310_resume,
.soft_reset = genphy_no_soft_reset,
.config_init = mv3310_config_init,
.config_aneg = mv3310_config_aneg,
.aneg_done = mv3310_aneg_done,
.read_status = mv3310_read_status,
},
};
module_phy_driver(mv3310_drivers);
static struct mdio_device_id __maybe_unused mv3310_tbl[] = {
{ MARVELL_PHY_ID_88X3310, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E2110, MARVELL_PHY_ID_MASK },
{ },
};
MODULE_DEVICE_TABLE(mdio, mv3310_tbl);
MODULE_DESCRIPTION("Marvell Alaska X 10Gigabit Ethernet PHY driver (MV88X3310)");
MODULE_LICENSE("GPL");