blob: f76e0eab32b8ec6b8ae48c68f489ddf19845690e [file] [log] [blame]
/******************************************************************************
*
* Name: hwxfsleep.c - ACPI Hardware Sleep/Wake External Interfaces
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2016, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#define EXPORT_ACPI_INTERFACES
#include <acpi/acpi.h>
#include "accommon.h"
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME("hwxfsleep")
/* Local prototypes */
#if (!ACPI_REDUCED_HARDWARE)
static acpi_status
acpi_hw_set_firmware_waking_vector(struct acpi_table_facs *facs,
acpi_physical_address physical_address,
acpi_physical_address physical_address64);
#endif
static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id);
/*
* Dispatch table used to efficiently branch to the various sleep
* functions.
*/
#define ACPI_SLEEP_FUNCTION_ID 0
#define ACPI_WAKE_PREP_FUNCTION_ID 1
#define ACPI_WAKE_FUNCTION_ID 2
/* Legacy functions are optional, based upon ACPI_REDUCED_HARDWARE */
static struct acpi_sleep_functions acpi_sleep_dispatch[] = {
{ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_sleep),
acpi_hw_extended_sleep},
{ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake_prep),
acpi_hw_extended_wake_prep},
{ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake), acpi_hw_extended_wake}
};
/*
* These functions are removed for the ACPI_REDUCED_HARDWARE case:
* acpi_set_firmware_waking_vector
* acpi_enter_sleep_state_s4bios
*/
#if (!ACPI_REDUCED_HARDWARE)
/*******************************************************************************
*
* FUNCTION: acpi_hw_set_firmware_waking_vector
*
* PARAMETERS: facs - Pointer to FACS table
* physical_address - 32-bit physical address of ACPI real mode
* entry point
* physical_address64 - 64-bit physical address of ACPI protected
* mode entry point
*
* RETURN: Status
*
* DESCRIPTION: Sets the firmware_waking_vector fields of the FACS
*
******************************************************************************/
static acpi_status
acpi_hw_set_firmware_waking_vector(struct acpi_table_facs *facs,
acpi_physical_address physical_address,
acpi_physical_address physical_address64)
{
ACPI_FUNCTION_TRACE(acpi_hw_set_firmware_waking_vector);
/*
* According to the ACPI specification 2.0c and later, the 64-bit
* waking vector should be cleared and the 32-bit waking vector should
* be used, unless we want the wake-up code to be called by the BIOS in
* Protected Mode. Some systems (for example HP dv5-1004nr) are known
* to fail to resume if the 64-bit vector is used.
*/
/* Set the 32-bit vector */
facs->firmware_waking_vector = (u32)physical_address;
if (facs->length > 32) {
if (facs->version >= 1) {
/* Set the 64-bit vector */
facs->xfirmware_waking_vector = physical_address64;
} else {
/* Clear the 64-bit vector if it exists */
facs->xfirmware_waking_vector = 0;
}
}
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_set_firmware_waking_vector
*
* PARAMETERS: physical_address - 32-bit physical address of ACPI real mode
* entry point
* physical_address64 - 64-bit physical address of ACPI protected
* mode entry point
*
* RETURN: Status
*
* DESCRIPTION: Sets the firmware_waking_vector fields of the FACS
*
******************************************************************************/
acpi_status
acpi_set_firmware_waking_vector(acpi_physical_address physical_address,
acpi_physical_address physical_address64)
{
ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector);
if (acpi_gbl_FACS) {
(void)acpi_hw_set_firmware_waking_vector(acpi_gbl_FACS,
physical_address,
physical_address64);
}
return_ACPI_STATUS(AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector)
/*******************************************************************************
*
* FUNCTION: acpi_enter_sleep_state_s4bios
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Perform a S4 bios request.
* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
*
******************************************************************************/
acpi_status acpi_enter_sleep_state_s4bios(void)
{
u32 in_value;
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios);
/* Clear the wake status bit (PM1) */
status =
acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status = acpi_hw_clear_acpi_status();
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/*
* 1) Disable/Clear all GPEs
* 2) Enable all wakeup GPEs
*/
status = acpi_hw_disable_all_gpes();
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
acpi_gbl_system_awake_and_running = FALSE;
status = acpi_hw_enable_all_wakeup_gpes();
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
ACPI_FLUSH_CPU_CACHE();
status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
(u32)acpi_gbl_FADT.s4_bios_request, 8);
do {
acpi_os_stall(ACPI_USEC_PER_MSEC);
status =
acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
} while (!in_value);
return_ACPI_STATUS(AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios)
#endif /* !ACPI_REDUCED_HARDWARE */
/*******************************************************************************
*
* FUNCTION: acpi_hw_sleep_dispatch
*
* PARAMETERS: sleep_state - Which sleep state to enter/exit
* function_id - Sleep, wake_prep, or Wake
*
* RETURN: Status from the invoked sleep handling function.
*
* DESCRIPTION: Dispatch a sleep/wake request to the appropriate handling
* function.
*
******************************************************************************/
static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id)
{
acpi_status status;
struct acpi_sleep_functions *sleep_functions =
&acpi_sleep_dispatch[function_id];
#if (!ACPI_REDUCED_HARDWARE)
/*
* If the Hardware Reduced flag is set (from the FADT), we must
* use the extended sleep registers (FADT). Note: As per the ACPI
* specification, these extended registers are to be used for HW-reduced
* platforms only. They are not general-purpose replacements for the
* legacy PM register sleep support.
*/
if (acpi_gbl_reduced_hardware) {
status = sleep_functions->extended_function(sleep_state);
} else {
/* Legacy sleep */
status = sleep_functions->legacy_function(sleep_state);
}
return (status);
#else
/*
* For the case where reduced-hardware-only code is being generated,
* we know that only the extended sleep registers are available
*/
status = sleep_functions->extended_function(sleep_state);
return (status);
#endif /* !ACPI_REDUCED_HARDWARE */
}
/*******************************************************************************
*
* FUNCTION: acpi_enter_sleep_state_prep
*
* PARAMETERS: sleep_state - Which sleep state to enter
*
* RETURN: Status
*
* DESCRIPTION: Prepare to enter a system sleep state.
* This function must execute with interrupts enabled.
* We break sleeping into 2 stages so that OSPM can handle
* various OS-specific tasks between the two steps.
*
******************************************************************************/
acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
{
acpi_status status;
struct acpi_object_list arg_list;
union acpi_object arg;
u32 sst_value;
ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep);
status = acpi_get_sleep_type_data(sleep_state,
&acpi_gbl_sleep_type_a,
&acpi_gbl_sleep_type_b);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Execute the _PTS method (Prepare To Sleep) */
arg_list.count = 1;
arg_list.pointer = &arg;
arg.type = ACPI_TYPE_INTEGER;
arg.integer.value = sleep_state;
status =
acpi_evaluate_object(NULL, METHOD_PATHNAME__PTS, &arg_list, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
return_ACPI_STATUS(status);
}
/* Setup the argument to the _SST method (System STatus) */
switch (sleep_state) {
case ACPI_STATE_S0:
sst_value = ACPI_SST_WORKING;
break;
case ACPI_STATE_S1:
case ACPI_STATE_S2:
case ACPI_STATE_S3:
sst_value = ACPI_SST_SLEEPING;
break;
case ACPI_STATE_S4:
sst_value = ACPI_SST_SLEEP_CONTEXT;
break;
default:
sst_value = ACPI_SST_INDICATOR_OFF; /* Default is off */
break;
}
/*
* Set the system indicators to show the desired sleep state.
* _SST is an optional method (return no error if not found)
*/
acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, sst_value);
return_ACPI_STATUS(AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
/*******************************************************************************
*
* FUNCTION: acpi_enter_sleep_state
*
* PARAMETERS: sleep_state - Which sleep state to enter
*
* RETURN: Status
*
* DESCRIPTION: Enter a system sleep state
* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
*
******************************************************************************/
acpi_status acpi_enter_sleep_state(u8 sleep_state)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_enter_sleep_state);
if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
(acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X",
acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b));
return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
}
status = acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION_ID);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state)
/*******************************************************************************
*
* FUNCTION: acpi_leave_sleep_state_prep
*
* PARAMETERS: sleep_state - Which sleep state we are exiting
*
* RETURN: Status
*
* DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a
* sleep. Called with interrupts DISABLED.
* We break wake/resume into 2 stages so that OSPM can handle
* various OS-specific tasks between the two steps.
*
******************************************************************************/
acpi_status acpi_leave_sleep_state_prep(u8 sleep_state)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep);
status =
acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_PREP_FUNCTION_ID);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state_prep)
/*******************************************************************************
*
* FUNCTION: acpi_leave_sleep_state
*
* PARAMETERS: sleep_state - Which sleep state we are exiting
*
* RETURN: Status
*
* DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
* Called with interrupts ENABLED.
*
******************************************************************************/
acpi_status acpi_leave_sleep_state(u8 sleep_state)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_leave_sleep_state);
status = acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_FUNCTION_ID);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state)