blob: 2b953eb8ceae195d0aa328dc50d4760d3a2268df [file] [log] [blame]
/*
* linux/include/linux/mmc/core.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef LINUX_MMC_CORE_H
#define LINUX_MMC_CORE_H
#include <linux/interrupt.h>
#include <linux/completion.h>
struct request;
struct mmc_data;
struct mmc_request;
struct mmc_command {
u32 opcode;
u32 arg;
#define MMC_CMD23_ARG_REL_WR (1 << 31)
#define MMC_CMD23_ARG_PACKED ((0 << 31) | (1 << 30))
#define MMC_CMD23_ARG_TAG_REQ (1 << 29)
u32 resp[4];
unsigned int flags; /* expected response type */
#define MMC_RSP_PRESENT (1 << 0)
#define MMC_RSP_136 (1 << 1) /* 136 bit response */
#define MMC_RSP_CRC (1 << 2) /* expect valid crc */
#define MMC_RSP_BUSY (1 << 3) /* card may send busy */
#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
#define MMC_CMD_MASK (3 << 5) /* non-SPI command type */
#define MMC_CMD_AC (0 << 5)
#define MMC_CMD_ADTC (1 << 5)
#define MMC_CMD_BC (2 << 5)
#define MMC_CMD_BCR (3 << 5)
#define MMC_RSP_SPI_S1 (1 << 7) /* one status byte */
#define MMC_RSP_SPI_S2 (1 << 8) /* second byte */
#define MMC_RSP_SPI_B4 (1 << 9) /* four data bytes */
#define MMC_RSP_SPI_BUSY (1 << 10) /* card may send busy */
/*
* These are the native response types, and correspond to valid bit
* patterns of the above flags. One additional valid pattern
* is all zeros, which means we don't expect a response.
*/
#define MMC_RSP_NONE (0)
#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
#define MMC_RSP_R3 (MMC_RSP_PRESENT)
#define MMC_RSP_R4 (MMC_RSP_PRESENT)
#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
/* Can be used by core to poll after switch to MMC HS mode */
#define MMC_RSP_R1_NO_CRC (MMC_RSP_PRESENT|MMC_RSP_OPCODE)
#define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
/*
* These are the SPI response types for MMC, SD, and SDIO cards.
* Commands return R1, with maybe more info. Zero is an error type;
* callers must always provide the appropriate MMC_RSP_SPI_Rx flags.
*/
#define MMC_RSP_SPI_R1 (MMC_RSP_SPI_S1)
#define MMC_RSP_SPI_R1B (MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY)
#define MMC_RSP_SPI_R2 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
#define MMC_RSP_SPI_R3 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
#define MMC_RSP_SPI_R4 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
#define MMC_RSP_SPI_R5 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
#define MMC_RSP_SPI_R7 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
#define mmc_spi_resp_type(cmd) ((cmd)->flags & \
(MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY|MMC_RSP_SPI_S2|MMC_RSP_SPI_B4))
/*
* These are the command types.
*/
#define mmc_cmd_type(cmd) ((cmd)->flags & MMC_CMD_MASK)
unsigned int retries; /* max number of retries */
int error; /* command error */
/*
* Standard errno values are used for errors, but some have specific
* meaning in the MMC layer:
*
* ETIMEDOUT Card took too long to respond
* EILSEQ Basic format problem with the received or sent data
* (e.g. CRC check failed, incorrect opcode in response
* or bad end bit)
* EINVAL Request cannot be performed because of restrictions
* in hardware and/or the driver
* ENOMEDIUM Host can determine that the slot is empty and is
* actively failing requests
*/
unsigned int busy_timeout; /* busy detect timeout in ms */
/* Set this flag only for blocking sanitize request */
bool sanitize_busy;
struct mmc_data *data; /* data segment associated with cmd */
struct mmc_request *mrq; /* associated request */
};
struct mmc_data {
unsigned int timeout_ns; /* data timeout (in ns, max 80ms) */
unsigned int timeout_clks; /* data timeout (in clocks) */
unsigned int blksz; /* data block size */
unsigned int blocks; /* number of blocks */
int error; /* data error */
unsigned int flags;
#define MMC_DATA_WRITE (1 << 8)
#define MMC_DATA_READ (1 << 9)
unsigned int bytes_xfered;
struct mmc_command *stop; /* stop command */
struct mmc_request *mrq; /* associated request */
unsigned int sg_len; /* size of scatter list */
int sg_count; /* mapped sg entries */
struct scatterlist *sg; /* I/O scatter list */
s32 host_cookie; /* host private data */
};
struct mmc_host;
struct mmc_request {
struct mmc_command *sbc; /* SET_BLOCK_COUNT for multiblock */
struct mmc_command *cmd;
struct mmc_data *data;
struct mmc_command *stop;
struct completion completion;
struct completion cmd_completion;
void (*done)(struct mmc_request *);/* completion function */
struct mmc_host *host;
/* Allow other commands during this ongoing data transfer or busy wait */
bool cap_cmd_during_tfr;
};
struct mmc_card;
struct mmc_async_req;
extern int mmc_stop_bkops(struct mmc_card *);
extern int mmc_read_bkops_status(struct mmc_card *);
extern struct mmc_async_req *mmc_start_req(struct mmc_host *,
struct mmc_async_req *, int *);
extern int mmc_interrupt_hpi(struct mmc_card *);
extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *);
extern void mmc_wait_for_req_done(struct mmc_host *host,
struct mmc_request *mrq);
extern bool mmc_is_req_done(struct mmc_host *host, struct mmc_request *mrq);
extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int);
extern int mmc_app_cmd(struct mmc_host *, struct mmc_card *);
extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
struct mmc_command *, int);
extern void mmc_start_bkops(struct mmc_card *card, bool from_exception);
extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
extern int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error);
extern int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd);
#define MMC_ERASE_ARG 0x00000000
#define MMC_SECURE_ERASE_ARG 0x80000000
#define MMC_TRIM_ARG 0x00000001
#define MMC_DISCARD_ARG 0x00000003
#define MMC_SECURE_TRIM1_ARG 0x80000001
#define MMC_SECURE_TRIM2_ARG 0x80008000
#define MMC_SECURE_ARGS 0x80000000
#define MMC_TRIM_ARGS 0x00008001
extern int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr,
unsigned int arg);
extern int mmc_can_erase(struct mmc_card *card);
extern int mmc_can_trim(struct mmc_card *card);
extern int mmc_can_discard(struct mmc_card *card);
extern int mmc_can_sanitize(struct mmc_card *card);
extern int mmc_can_secure_erase_trim(struct mmc_card *card);
extern int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
unsigned int nr);
extern unsigned int mmc_calc_max_discard(struct mmc_card *card);
extern int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen);
extern int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount,
bool is_rel_write);
extern int mmc_hw_reset(struct mmc_host *host);
extern int mmc_can_reset(struct mmc_card *card);
extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *);
extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int);
extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
extern void mmc_release_host(struct mmc_host *host);
extern void mmc_get_card(struct mmc_card *card);
extern void mmc_put_card(struct mmc_card *card);
extern int mmc_flush_cache(struct mmc_card *);
extern int mmc_detect_card_removed(struct mmc_host *host);
/**
* mmc_claim_host - exclusively claim a host
* @host: mmc host to claim
*
* Claim a host for a set of operations.
*/
static inline void mmc_claim_host(struct mmc_host *host)
{
__mmc_claim_host(host, NULL);
}
struct device_node;
extern u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max);
extern int mmc_of_parse_voltage(struct device_node *np, u32 *mask);
#endif /* LINUX_MMC_CORE_H */