blob: caf112629caad635b0948e23c8aa67941cf6161d [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+ OR MIT
//
// Device Tree Source for UniPhier LD20 SoC
//
// Copyright (C) 2015-2016 Socionext Inc.
// Author: Masahiro Yamada <yamada.masahiro@socionext.com>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/uniphier-gpio.h>
#include <dt-bindings/thermal/thermal.h>
/memreserve/ 0x80000000 0x02000000;
/ {
compatible = "socionext,uniphier-ld20";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&gic>;
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu-map {
cluster0 {
core0 {
cpu = <&cpu0>;
};
core1 {
cpu = <&cpu1>;
};
};
cluster1 {
core0 {
cpu = <&cpu2>;
};
core1 {
cpu = <&cpu3>;
};
};
};
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0 0x000>;
clocks = <&sys_clk 32>;
enable-method = "psci";
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0 0x001>;
clocks = <&sys_clk 32>;
enable-method = "psci";
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x100>;
clocks = <&sys_clk 33>;
enable-method = "psci";
operating-points-v2 = <&cluster1_opp>;
#cooling-cells = <2>;
};
cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0 0x101>;
clocks = <&sys_clk 33>;
enable-method = "psci";
operating-points-v2 = <&cluster1_opp>;
#cooling-cells = <2>;
};
};
cluster0_opp: opp-table0 {
compatible = "operating-points-v2";
opp-shared;
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
clock-latency-ns = <300>;
};
opp-275000000 {
opp-hz = /bits/ 64 <275000000>;
clock-latency-ns = <300>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
clock-latency-ns = <300>;
};
opp-550000000 {
opp-hz = /bits/ 64 <550000000>;
clock-latency-ns = <300>;
};
opp-666667000 {
opp-hz = /bits/ 64 <666667000>;
clock-latency-ns = <300>;
};
opp-733334000 {
opp-hz = /bits/ 64 <733334000>;
clock-latency-ns = <300>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
clock-latency-ns = <300>;
};
opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
clock-latency-ns = <300>;
};
};
cluster1_opp: opp-table1 {
compatible = "operating-points-v2";
opp-shared;
opp-250000000 {
opp-hz = /bits/ 64 <250000000>;
clock-latency-ns = <300>;
};
opp-275000000 {
opp-hz = /bits/ 64 <275000000>;
clock-latency-ns = <300>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
clock-latency-ns = <300>;
};
opp-550000000 {
opp-hz = /bits/ 64 <550000000>;
clock-latency-ns = <300>;
};
opp-666667000 {
opp-hz = /bits/ 64 <666667000>;
clock-latency-ns = <300>;
};
opp-733334000 {
opp-hz = /bits/ 64 <733334000>;
clock-latency-ns = <300>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
clock-latency-ns = <300>;
};
opp-1100000000 {
opp-hz = /bits/ 64 <1100000000>;
clock-latency-ns = <300>;
};
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
clocks {
refclk: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 4>,
<1 14 4>,
<1 11 4>,
<1 10 4>;
};
thermal-zones {
cpu-thermal {
polling-delay-passive = <250>; /* 250ms */
polling-delay = <1000>; /* 1000ms */
thermal-sensors = <&pvtctl>;
trips {
cpu_crit: cpu-crit {
temperature = <110000>; /* 110C */
hysteresis = <2000>;
type = "critical";
};
cpu_alert: cpu-alert {
temperature = <100000>; /* 100C */
hysteresis = <2000>;
type = "passive";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert>;
cooling-device = <&cpu0
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu_alert>;
cooling-device = <&cpu2
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006800 0x40>;
interrupts = <0 33 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006900 0x40>;
interrupts = <0 35 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006a00 0x40>;
interrupts = <0 37 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
compatible = "socionext,uniphier-uart";
status = "disabled";
reg = <0x54006b00 0x40>;
interrupts = <0 177 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
resets = <&peri_rst 3>;
};
gpio: gpio@55000000 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000000 0x200>;
interrupt-parent = <&aidet>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 0 0>,
<&pinctrl 96 0 0>,
<&pinctrl 160 0 0>;
gpio-ranges-group-names = "gpio_range0",
"gpio_range1",
"gpio_range2";
ngpios = <205>;
socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
<21 217 3>;
};
audio@56000000 {
compatible = "socionext,uniphier-ld20-aio";
reg = <0x56000000 0x80000>;
interrupts = <0 144 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_aout1>,
<&pinctrl_aoutiec1>;
clock-names = "aio";
clocks = <&sys_clk 40>;
reset-names = "aio";
resets = <&sys_rst 40>;
#sound-dai-cells = <1>;
socionext,syscon = <&soc_glue>;
i2s_port0: port@0 {
i2s_hdmi: endpoint {
};
};
i2s_port1: port@1 {
i2s_pcmin2: endpoint {
};
};
i2s_port2: port@2 {
i2s_line: endpoint {
dai-format = "i2s";
remote-endpoint = <&evea_line>;
};
};
i2s_port3: port@3 {
i2s_hpcmout1: endpoint {
};
};
i2s_port4: port@4 {
i2s_hp: endpoint {
dai-format = "i2s";
remote-endpoint = <&evea_hp>;
};
};
spdif_port0: port@5 {
spdif_hiecout1: endpoint {
};
};
src_port0: port@6 {
i2s_epcmout2: endpoint {
};
};
src_port1: port@7 {
i2s_epcmout3: endpoint {
};
};
comp_spdif_port0: port@8 {
comp_spdif_hiecout1: endpoint {
};
};
};
codec@57900000 {
compatible = "socionext,uniphier-evea";
reg = <0x57900000 0x1000>;
clock-names = "evea", "exiv";
clocks = <&sys_clk 41>, <&sys_clk 42>;
reset-names = "evea", "exiv", "adamv";
resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>;
#sound-dai-cells = <1>;
port@0 {
evea_line: endpoint {
remote-endpoint = <&i2s_line>;
};
};
port@1 {
evea_hp: endpoint {
remote-endpoint = <&i2s_hp>;
};
};
};
adamv@57920000 {
compatible = "socionext,uniphier-ld20-adamv",
"simple-mfd", "syscon";
reg = <0x57920000 0x1000>;
adamv_rst: reset {
compatible = "socionext,uniphier-ld20-adamv-reset";
#reset-cells = <1>;
};
};
i2c0: i2c@58780000 {
compatible = "socionext,uniphier-fi2c";
status = "disabled";
reg = <0x58780000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 41 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
i2c1: i2c@58781000 {
compatible = "socionext,uniphier-fi2c";
status = "disabled";
reg = <0x58781000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 42 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
i2c2: i2c@58782000 {
compatible = "socionext,uniphier-fi2c";
reg = <0x58782000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 43 4>;
clocks = <&peri_clk 6>;
resets = <&peri_rst 6>;
clock-frequency = <400000>;
};
i2c3: i2c@58783000 {
compatible = "socionext,uniphier-fi2c";
status = "disabled";
reg = <0x58783000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 44 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
i2c4: i2c@58784000 {
compatible = "socionext,uniphier-fi2c";
status = "disabled";
reg = <0x58784000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 45 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
clocks = <&peri_clk 8>;
resets = <&peri_rst 8>;
clock-frequency = <100000>;
};
i2c5: i2c@58785000 {
compatible = "socionext,uniphier-fi2c";
reg = <0x58785000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&peri_clk 9>;
resets = <&peri_rst 9>;
clock-frequency = <400000>;
};
system_bus: system-bus@58c00000 {
compatible = "socionext,uniphier-system-bus";
status = "disabled";
reg = <0x58c00000 0x400>;
#address-cells = <2>;
#size-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_system_bus>;
};
smpctrl@59801000 {
compatible = "socionext,uniphier-smpctrl";
reg = <0x59801000 0x400>;
};
sdctrl@59810000 {
compatible = "socionext,uniphier-ld20-sdctrl",
"simple-mfd", "syscon";
reg = <0x59810000 0x400>;
sd_clk: clock {
compatible = "socionext,uniphier-ld20-sd-clock";
#clock-cells = <1>;
};
sd_rst: reset {
compatible = "socionext,uniphier-ld20-sd-reset";
#reset-cells = <1>;
};
};
perictrl@59820000 {
compatible = "socionext,uniphier-ld20-perictrl",
"simple-mfd", "syscon";
reg = <0x59820000 0x200>;
peri_clk: clock {
compatible = "socionext,uniphier-ld20-peri-clock";
#clock-cells = <1>;
};
peri_rst: reset {
compatible = "socionext,uniphier-ld20-peri-reset";
#reset-cells = <1>;
};
};
emmc: sdhc@5a000000 {
compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
reg = <0x5a000000 0x400>;
interrupts = <0 78 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_emmc>;
clocks = <&sys_clk 4>;
resets = <&sys_rst 4>;
bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
cdns,phy-input-delay-legacy = <9>;
cdns,phy-input-delay-mmc-highspeed = <2>;
cdns,phy-input-delay-mmc-ddr = <3>;
cdns,phy-dll-delay-sdclk = <21>;
cdns,phy-dll-delay-sdclk-hsmmc = <21>;
};
soc_glue: soc-glue@5f800000 {
compatible = "socionext,uniphier-ld20-soc-glue",
"simple-mfd", "syscon";
reg = <0x5f800000 0x2000>;
pinctrl: pinctrl {
compatible = "socionext,uniphier-ld20-pinctrl";
};
};
soc-glue@5f900000 {
compatible = "socionext,uniphier-ld20-soc-glue-debug",
"simple-mfd";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x5f900000 0x2000>;
efuse@100 {
compatible = "socionext,uniphier-efuse";
reg = <0x100 0x28>;
};
efuse@200 {
compatible = "socionext,uniphier-efuse";
reg = <0x200 0x68>;
};
};
aidet: aidet@5fc20000 {
compatible = "socionext,uniphier-ld20-aidet";
reg = <0x5fc20000 0x200>;
interrupt-controller;
#interrupt-cells = <2>;
};
gic: interrupt-controller@5fe00000 {
compatible = "arm,gic-v3";
reg = <0x5fe00000 0x10000>, /* GICD */
<0x5fe80000 0x80000>; /* GICR */
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <1 9 4>;
};
sysctrl@61840000 {
compatible = "socionext,uniphier-ld20-sysctrl",
"simple-mfd", "syscon";
reg = <0x61840000 0x10000>;
sys_clk: clock {
compatible = "socionext,uniphier-ld20-clock";
#clock-cells = <1>;
};
sys_rst: reset {
compatible = "socionext,uniphier-ld20-reset";
#reset-cells = <1>;
};
watchdog {
compatible = "socionext,uniphier-wdt";
};
pvtctl: pvtctl {
compatible = "socionext,uniphier-ld20-thermal";
interrupts = <0 3 4>;
#thermal-sensor-cells = <0>;
socionext,tmod-calibration = <0x0f22 0x68ee>;
};
};
eth: ethernet@65000000 {
compatible = "socionext,uniphier-ld20-ave4";
status = "disabled";
reg = <0x65000000 0x8500>;
interrupts = <0 66 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ether_rgmii>;
clock-names = "ether";
clocks = <&sys_clk 6>;
reset-names = "ether";
resets = <&sys_rst 6>;
phy-mode = "rgmii";
local-mac-address = [00 00 00 00 00 00];
socionext,syscon-phy-mode = <&soc_glue 0>;
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
};
};
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";
reg-names = "nand_data", "denali_reg";
reg = <0x68000000 0x20>, <0x68100000 0x1000>;
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
clocks = <&sys_clk 2>;
resets = <&sys_rst 2>;
};
};
};
#include "uniphier-pinctrl.dtsi"
&pinctrl_aout1 {
drive-strength = <4>; /* default: 3.5mA */
ao1dacck {
pins = "AO1DACCK";
drive-strength = <5>; /* 5mA */
};
};
&pinctrl_aoutiec1 {
drive-strength = <4>; /* default: 3.5mA */
ao1arc {
pins = "AO1ARC";
drive-strength = <11>; /* 11mA */
};
};