blob: 7968d524351b3e83ce227784164cf690f5daa158 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+ OR MIT
//
// Device Tree Source for UniPhier LD11 Global Board
//
// Copyright (C) 2016-2017 Socionext Inc.
// Author: Masahiro Yamada <yamada.masahiro@socionext.com>
// Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
/dts-v1/;
#include <dt-bindings/gpio/uniphier-gpio.h>
#include "uniphier-ld11.dtsi"
/ {
model = "UniPhier LD11 Global Board (REF_LD11_GP)";
compatible = "socionext,uniphier-ld11-global",
"socionext,uniphier-ld11";
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
serial3 = &serial3;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
};
memory@80000000 {
device_type = "memory";
reg = <0 0x80000000 0 0x40000000>;
};
dvdd_reg: reg-fixed {
compatible = "regulator-fixed";
regulator-name = "DVDD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
amp_vcc_reg: reg-fixed {
compatible = "regulator-fixed";
regulator-name = "AMP_VCC";
regulator-min-microvolt = <24000000>;
regulator-max-microvolt = <24000000>;
};
sound {
compatible = "audio-graph-card";
label = "UniPhier LD11";
widgets = "Headphone", "Headphones";
dais = <&i2s_port2
&i2s_port3
&i2s_port4
&spdif_port0
&comp_spdif_port0>;
hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
};
spdif-out {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
port@0 {
spdif_tx: endpoint {
remote-endpoint = <&spdif_hiecout1>;
};
};
};
comp-spdif-out {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
port@0 {
comp_spdif_tx: endpoint {
remote-endpoint = <&comp_spdif_hiecout1>;
};
};
};
};
&serial0 {
status = "okay";
};
&serial1 {
status = "okay";
};
&i2s_hpcmout1 {
dai-format = "i2s";
remote-endpoint = <&tas_speaker>;
};
&spdif_hiecout1 {
remote-endpoint = <&spdif_tx>;
};
&comp_spdif_hiecout1 {
remote-endpoint = <&comp_spdif_tx>;
};
&i2c0 {
status = "okay";
tas5707a@1d {
compatible = "ti,tas5711";
reg = <0x1d>;
reset-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 4) GPIO_ACTIVE_LOW>;
pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 5) GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
AVDD-supply = <&dvdd_reg>;
DVDD-supply = <&dvdd_reg>;
PVDD_A-supply = <&amp_vcc_reg>;
PVDD_B-supply = <&amp_vcc_reg>;
PVDD_C-supply = <&amp_vcc_reg>;
PVDD_D-supply = <&amp_vcc_reg>;
port@0 {
tas_speaker: endpoint {
dai-format = "i2s";
remote-endpoint = <&i2s_hpcmout1>;
};
};
};
eeprom@50 {
compatible = "st,24c64", "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
};
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};
&usb2 {
status = "okay";
};
&eth {
status = "okay";
phy-handle = <&ethphy>;
};
&mdio {
ethphy: ethphy@1 {
reg = <1>;
};
};
&nand {
status = "okay";
};