blob: 412efdb46e7cd6e524b0aa112e7d5f3687faecd3 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 Marvell Technology Group Ltd.
*
* Device Tree file for Marvell Armada 7040 Development board platform
*/
#include <dt-bindings/gpio/gpio.h>
#include "armada-7040.dtsi"
/ {
model = "Marvell Armada 7040 DB board";
compatible = "marvell,armada7040-db", "marvell,armada7040",
"marvell,armada-ap806-quad", "marvell,armada-ap806";
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
aliases {
ethernet0 = &cp0_eth0;
ethernet1 = &cp0_eth1;
ethernet2 = &cp0_eth2;
};
cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb3h0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
};
cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb3h1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
};
cp0_usb3_0_phy: cp0-usb3-0-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp0_reg_usb3_0_vbus>;
};
cp0_usb3_1_phy: cp0-usb3-1-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp0_reg_usb3_1_vbus>;
};
};
&i2c0 {
status = "okay";
clock-frequency = <100000>;
};
&spi0 {
status = "okay";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "U-Boot";
reg = <0 0x200000>;
};
partition@400000 {
label = "Filesystem";
reg = <0x200000 0xce0000>;
};
};
};
};
&uart0 {
status = "okay";
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
};
&cp0_pcie2 {
status = "okay";
};
&cp0_i2c0 {
status = "okay";
clock-frequency = <100000>;
expander0: pca9555@21 {
compatible = "nxp,pca9555";
pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
reg = <0x21>;
/*
* IO0_0: USB3_PWR_EN0 IO1_0: USB_3_1_Dev_Detect
* IO0_1: USB3_PWR_EN1 IO1_1: USB2_1_current_limit
* IO0_2: DDR3_4_Detect IO1_2: Hcon_IO_RstN
* IO0_3: USB2_DEVICE_DETECT
* IO0_4: GPIO_0 IO1_4: SD_Status
* IO0_5: GPIO_1 IO1_5: LDO_5V_Enable
* IO0_6: IHB_5V_Enable IO1_6: PWR_EN_eMMC
* IO0_7: IO1_7: SDIO_Vcntrl
*/
};
};
&cp0_nand_controller {
/*
* SPI on CPM and NAND have common pins on this board. We can
* use only one at a time. To enable the NAND (which will
* disable the SPI), the "status = "okay";" line have to be
* added here.
*/
pinctrl-0 = <&nand_pins>, <&nand_rb>;
pinctrl-names = "default";
nand@0 {
reg = <0>;
label = "pxa3xx_nand-0";
nand-rb = <0>;
nand-on-flash-bbt;
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "U-Boot";
reg = <0 0x200000>;
};
partition@200000 {
label = "Linux";
reg = <0x200000 0xe00000>;
};
partition@1000000 {
label = "Filesystem";
reg = <0x1000000 0x3f000000>;
};
};
};
};
&cp0_spi1 {
status = "okay";
spi-flash@0 {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <20000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "U-Boot";
reg = <0x0 0x200000>;
};
partition@400000 {
label = "Filesystem";
reg = <0x200000 0xe00000>;
};
};
};
};
&cp0_sata0 {
status = "okay";
};
&cp0_usb3_0 {
usb-phy = <&cp0_usb3_0_phy>;
status = "okay";
};
&cp0_usb3_1 {
usb-phy = <&cp0_usb3_1_phy>;
status = "okay";
};
&ap_sdhci0 {
status = "okay";
bus-width = <4>;
no-1-8-v;
non-removable;
};
&cp0_sdhci0 {
status = "okay";
bus-width = <4>;
no-1-8-v;
cd-gpios = <&expander0 12 GPIO_ACTIVE_LOW>;
};
&cp0_mdio {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
};
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&cp0_ethernet {
status = "okay";
};
&cp0_eth0 {
status = "okay";
/* Network PHY */
phy-mode = "10gbase-kr";
/* Generic PHY, providing serdes lanes */
phys = <&cp0_comphy2 0>;
fixed-link {
speed = <10000>;
full-duplex;
};
};
&cp0_eth1 {
status = "okay";
/* Network PHY */
phy = <&phy0>;
phy-mode = "sgmii";
/* Generic PHY, providing serdes lanes */
phys = <&cp0_comphy0 1>;
};
&cp0_eth2 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};