blob: 9c52712af24111daeb7e94a8be2ebabcc94c55c9 [file] [log] [blame]
/*
* Copyright 2013 Maxime Ripard
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/clock/sun7i-a20-ccu.h>
#include <dt-bindings/reset/sun4i-a10-ccu.h>
/ {
interrupt-parent = <&gic>;
aliases {
ethernet0 = &gmac;
};
chosen {
#address-cells = <1>;
#size-cells = <1>;
ranges;
framebuffer@0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
<&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
<&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>,
<&ccu CLK_HDMI>;
status = "disabled";
};
framebuffer@1 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
<&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH0>,
<&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
framebuffer@2 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-tve0";
clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
<&ccu CLK_AHB_DE_BE0>,
<&ccu CLK_DE_BE0>, <&ccu CLK_TCON0_CH1>,
<&ccu CLK_DRAM_TVE0>, <&ccu CLK_DRAM_DE_BE0>;
status = "disabled";
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
960000 1400000
912000 1400000
864000 1300000
720000 1200000
528000 1100000
312000 1000000
144000 1000000
>;
#cooling-cells = <2>;
};
cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
/* kHz uV */
960000 1400000
912000 1400000
864000 1300000
720000 1200000
528000 1100000
312000 1000000
144000 1000000
>;
#cooling-cells = <2>;
};
};
thermal-zones {
cpu_thermal {
/* milliseconds */
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&rtp>;
cooling-maps {
map0 {
trip = <&cpu_alert0>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
trips {
cpu_alert0: cpu_alert0 {
/* milliCelsius */
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit: cpu_crit {
/* milliCelsius */
temperature = <100000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
memory {
reg = <0x40000000 0x80000000>;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
pmu {
compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
};
clocks {
#address-cells = <1>;
#size-cells = <1>;
ranges;
osc24M: clk@1c20050 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
osc32k: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
/*
* The following two are dummy clocks, placeholders
* used in the gmac_tx clock. The gmac driver will
* choose one parent depending on the PHY interface
* mode, using clk_set_rate auto-reparenting.
*
* The actual TX clock rate is not controlled by the
* gmac_tx clock.
*/
mii_phy_tx_clk: clk@1 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "mii_phy_tx";
};
gmac_int_tx_clk: clk@2 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
clock-output-names = "gmac_int_tx";
};
gmac_tx_clk: clk@1c20164 {
#clock-cells = <0>;
compatible = "allwinner,sun7i-a20-gmac-clk";
reg = <0x01c20164 0x4>;
clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
clock-output-names = "gmac_tx";
};
};
de: display-engine {
compatible = "allwinner,sun7i-a20-display-engine";
allwinner,pipelines = <&fe0>, <&fe1>;
status = "disabled";
};
soc@1c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
system-control@1c00000 {
compatible = "allwinner,sun7i-a20-system-control",
"allwinner,sun4i-a10-system-control";
reg = <0x01c00000 0x30>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
sram_a: sram@0 {
compatible = "mmio-sram";
reg = <0x00000000 0xc000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00000000 0xc000>;
emac_sram: sram-section@8000 {
compatible = "allwinner,sun7i-a20-sram-a3-a4",
"allwinner,sun4i-a10-sram-a3-a4";
reg = <0x8000 0x4000>;
status = "disabled";
};
};
sram_d: sram@10000 {
compatible = "mmio-sram";
reg = <0x00010000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00010000 0x1000>;
otg_sram: sram-section@0 {
compatible = "allwinner,sun7i-a20-sram-d",
"allwinner,sun4i-a10-sram-d";
reg = <0x0000 0x1000>;
status = "disabled";
};
};
sram_c: sram@1d00000 {
compatible = "mmio-sram";
reg = <0x01d00000 0xd0000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x01d00000 0xd0000>;
ve_sram: sram-section@0 {
compatible = "allwinner,sun7i-a20-sram-c1",
"allwinner,sun4i-a10-sram-c1";
reg = <0x000000 0x80000>;
};
};
};
nmi_intc: interrupt-controller@1c00030 {
compatible = "allwinner,sun7i-a20-sc-nmi";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x01c00030 0x0c>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
dma: dma-controller@1c02000 {
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_DMA>;
#dma-cells = <2>;
};
nfc: nand@1c03000 {
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 3>;
dma-names = "rxtx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
spi0: spi@1c05000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 27>,
<&dma SUN4I_DMA_DEDICATED 26>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
num-cs = <4>;
};
spi1: spi@1c06000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 9>,
<&dma SUN4I_DMA_DEDICATED 8>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
num-cs = <1>;
};
emac: ethernet@1c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_EMAC>;
allwinner,sram = <&emac_sram 1>;
status = "disabled";
};
mdio: mdio@1c0b080 {
compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun7i-a20-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
resets = <&ccu RST_TCON0>;
reset-names = "lcd";
clocks = <&ccu CLK_AHB_LCD0>,
<&ccu CLK_TCON0_CH0>,
<&ccu CLK_TCON0_CH1>;
clock-names = "ahb",
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon0-pixel-clock";
dmas = <&dma SUN4I_DMA_DEDICATED 14>;
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon0_in_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_out_tcon0>;
};
tcon0_in_be1: endpoint@1 {
reg = <1>;
remote-endpoint = <&be1_out_tcon0>;
};
};
tcon0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon0_out_hdmi: endpoint@1 {
reg = <1>;
remote-endpoint = <&hdmi_in_tcon0>;
allwinner,tcon-channel = <1>;
};
};
};
};
tcon1: lcd-controller@1c0d000 {
compatible = "allwinner,sun7i-a20-tcon";
reg = <0x01c0d000 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
resets = <&ccu RST_TCON1>;
reset-names = "lcd";
clocks = <&ccu CLK_AHB_LCD1>,
<&ccu CLK_TCON1_CH0>,
<&ccu CLK_TCON1_CH1>;
clock-names = "ahb",
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon1-pixel-clock";
dmas = <&dma SUN4I_DMA_DEDICATED 15>;
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon1_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon1_in_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_out_tcon1>;
};
tcon1_in_be1: endpoint@1 {
reg = <1>;
remote-endpoint = <&be1_out_tcon1>;
};
};
tcon1_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon1_out_hdmi: endpoint@1 {
reg = <1>;
remote-endpoint = <&hdmi_in_tcon1>;
allwinner,tcon-channel = <1>;
};
};
};
};
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&ccu CLK_AHB_MMC0>,
<&ccu CLK_MMC0>,
<&ccu CLK_MMC0_OUTPUT>,
<&ccu CLK_MMC0_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc1: mmc@1c10000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c10000 0x1000>;
clocks = <&ccu CLK_AHB_MMC1>,
<&ccu CLK_MMC1>,
<&ccu CLK_MMC1_OUTPUT>,
<&ccu CLK_MMC1_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc2: mmc@1c11000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c11000 0x1000>;
clocks = <&ccu CLK_AHB_MMC2>,
<&ccu CLK_MMC2>,
<&ccu CLK_MMC2_OUTPUT>,
<&ccu CLK_MMC2_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mmc3: mmc@1c12000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c12000 0x1000>;
clocks = <&ccu CLK_AHB_MMC3>,
<&ccu CLK_MMC3>,
<&ccu CLK_MMC3_OUTPUT>,
<&ccu CLK_MMC3_SAMPLE>;
clock-names = "ahb",
"mmc",
"output",
"sample";
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
usb_otg: usb@1c13000 {
compatible = "allwinner,sun4i-a10-musb";
reg = <0x01c13000 0x0400>;
clocks = <&ccu CLK_AHB_OTG>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mc";
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
allwinner,sram = <&otg_sram 1>;
status = "disabled";
};
usbphy: phy@1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun7i-a20-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
clocks = <&ccu CLK_USB_PHY>;
clock-names = "usb_phy";
resets = <&ccu RST_USB_PHY0>,
<&ccu RST_USB_PHY1>,
<&ccu RST_USB_PHY2>;
reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
status = "disabled";
};
ehci0: usb@1c14000 {
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_EHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
ohci0: usb@1c14400 {
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
phys = <&usbphy 1>;
phy-names = "usb";
status = "disabled";
};
crypto: crypto-engine@1c15000 {
compatible = "allwinner,sun7i-a20-crypto",
"allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
clock-names = "ahb", "mod";
};
hdmi: hdmi@1c16000 {
compatible = "allwinner,sun7i-a20-hdmi",
"allwinner,sun5i-a10s-hdmi";
reg = <0x01c16000 0x1000>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
<&ccu CLK_PLL_VIDEO0_2X>,
<&ccu CLK_PLL_VIDEO1_2X>;
clock-names = "ahb", "mod", "pll-0", "pll-1";
dmas = <&dma SUN4I_DMA_NORMAL 16>,
<&dma SUN4I_DMA_NORMAL 16>,
<&dma SUN4I_DMA_DEDICATED 24>;
dma-names = "ddc-tx", "ddc-rx", "audio-tx";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
hdmi_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
hdmi_in_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_out_hdmi>;
};
hdmi_in_tcon1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon1_out_hdmi>;
};
};
hdmi_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
};
spi2: spi@1c17000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 29>,
<&dma SUN4I_DMA_DEDICATED 28>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
num-cs = <1>;
};
ahci: sata@1c18000 {
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
status = "disabled";
};
ehci1: usb@1c1c000 {
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_EHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
ohci1: usb@1c1c400 {
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
phys = <&usbphy 2>;
phy-names = "usb";
status = "disabled";
};
spi3: spi@1c1f000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
clock-names = "ahb", "mod";
dmas = <&dma SUN4I_DMA_DEDICATED 31>,
<&dma SUN4I_DMA_DEDICATED 30>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
num-cs = <1>;
};
ccu: clock@1c20000 {
compatible = "allwinner,sun7i-a20-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
};
pio: pinctrl@1c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#gpio-cells = <3>;
can0_pins_a: can0@0 {
pins = "PH20", "PH21";
function = "can";
};
clk_out_a_pins_a: clk_out_a@0 {
pins = "PI12";
function = "clk_out_a";
};
clk_out_b_pins_a: clk_out_b@0 {
pins = "PI13";
function = "clk_out_b";
};
emac_pins_a: emac0@0 {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA9", "PA10",
"PA11", "PA12", "PA13", "PA14",
"PA15", "PA16";
function = "emac";
};
gmac_pins_mii_a: gmac_mii@0 {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA9", "PA10",
"PA11", "PA12", "PA13", "PA14",
"PA15", "PA16";
function = "gmac";
};
gmac_pins_rgmii_a: gmac_rgmii@0 {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA10",
"PA11", "PA12", "PA13",
"PA15", "PA16";
function = "gmac";
/*
* data lines in RGMII mode use DDR mode
* and need a higher signal drive strength
*/
drive-strength = <40>;
};
i2c0_pins_a: i2c0@0 {
pins = "PB0", "PB1";
function = "i2c0";
};
i2c1_pins_a: i2c1@0 {
pins = "PB18", "PB19";
function = "i2c1";
};
i2c2_pins_a: i2c2@0 {
pins = "PB20", "PB21";
function = "i2c2";
};
i2c3_pins_a: i2c3@0 {
pins = "PI0", "PI1";
function = "i2c3";
};
ir0_rx_pins_a: ir0@0 {
pins = "PB4";
function = "ir0";
};
ir0_tx_pins_a: ir0@1 {
pins = "PB3";
function = "ir0";
};
ir1_rx_pins_a: ir1@0 {
pins = "PB23";
function = "ir1";
};
ir1_tx_pins_a: ir1@1 {
pins = "PB22";
function = "ir1";
};
mmc0_pins_a: mmc0@0 {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
function = "mmc0";
drive-strength = <30>;
bias-pull-up;
};
mmc2_pins_a: mmc2@0 {
pins = "PC6", "PC7", "PC8",
"PC9", "PC10", "PC11";
function = "mmc2";
drive-strength = <30>;
bias-pull-up;
};
mmc3_pins_a: mmc3@0 {
pins = "PI4", "PI5", "PI6",
"PI7", "PI8", "PI9";
function = "mmc3";
drive-strength = <30>;
bias-pull-up;
};
ps20_pins_a: ps20@0 {
pins = "PI20", "PI21";
function = "ps2";
};
ps21_pins_a: ps21@0 {
pins = "PH12", "PH13";
function = "ps2";
};
pwm0_pins_a: pwm0@0 {
pins = "PB2";
function = "pwm";
};
pwm1_pins_a: pwm1@0 {
pins = "PI3";
function = "pwm";
};
spdif_tx_pins_a: spdif@0 {
pins = "PB13";
function = "spdif";
bias-pull-up;
};
spi0_pins_a: spi0@0 {
pins = "PI11", "PI12", "PI13";
function = "spi0";
};
spi0_cs0_pins_a: spi0_cs0@0 {
pins = "PI10";
function = "spi0";
};
spi0_cs1_pins_a: spi0_cs1@0 {
pins = "PI14";
function = "spi0";
};
spi1_pins_a: spi1@0 {
pins = "PI17", "PI18", "PI19";
function = "spi1";
};
spi1_cs0_pins_a: spi1_cs0@0 {
pins = "PI16";
function = "spi1";
};
spi2_pins_a: spi2@0 {
pins = "PC20", "PC21", "PC22";
function = "spi2";
};
spi2_pins_b: spi2@1 {
pins = "PB15", "PB16", "PB17";
function = "spi2";
};
spi2_cs0_pins_a: spi2_cs0@0 {
pins = "PC19";
function = "spi2";
};
spi2_cs0_pins_b: spi2_cs0@1 {
pins = "PB14";
function = "spi2";
};
uart0_pins_a: uart0@0 {
pins = "PB22", "PB23";
function = "uart0";
};
uart2_pins_a: uart2@0 {
pins = "PI16", "PI17", "PI18", "PI19";
function = "uart2";
};
uart3_pins_a: uart3@0 {
pins = "PG6", "PG7", "PG8", "PG9";
function = "uart3";
};
uart3_pins_b: uart3@1 {
pins = "PH0", "PH1";
function = "uart3";
};
uart4_pins_a: uart4@0 {
pins = "PG10", "PG11";
function = "uart4";
};
uart4_pins_b: uart4@1 {
pins = "PH4", "PH5";
function = "uart4";
};
uart5_pins_a: uart5@0 {
pins = "PI10", "PI11";
function = "uart5";
};
uart6_pins_a: uart6@0 {
pins = "PI12", "PI13";
function = "uart6";
};
uart7_pins_a: uart7@0 {
pins = "PI20", "PI21";
function = "uart7";
};
};
timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
wdt: watchdog@1c20c90 {
compatible = "allwinner,sun4i-a10-wdt";
reg = <0x01c20c90 0x10>;
};
rtc: rtc@1c20d00 {
compatible = "allwinner,sun7i-a20-rtc";
reg = <0x01c20d00 0x20>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
};
pwm: pwm@1c20e00 {
compatible = "allwinner,sun7i-a20-pwm";
reg = <0x01c20e00 0xc>;
clocks = <&osc24M>;
#pwm-cells = <3>;
status = "disabled";
};
spdif: spdif@1c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-spdif";
reg = <0x01c21000 0x400>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
clock-names = "apb", "spdif";
dmas = <&dma SUN4I_DMA_NORMAL 2>,
<&dma SUN4I_DMA_NORMAL 2>;
dma-names = "rx", "tx";
status = "disabled";
};
ir0: ir@1c21800 {
compatible = "allwinner,sun4i-a10-ir";
clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
clock-names = "apb", "ir";
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21800 0x40>;
status = "disabled";
};
ir1: ir@1c21c00 {
compatible = "allwinner,sun4i-a10-ir";
clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
clock-names = "apb", "ir";
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21c00 0x40>;
status = "disabled";
};
i2s1: i2s@1c22000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22000 0x400>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB0_I2S1>, <&ccu CLK_I2S1>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 4>,
<&dma SUN4I_DMA_NORMAL 4>;
dma-names = "rx", "tx";
status = "disabled";
};
i2s0: i2s@1c22400 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c22400 0x400>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 3>,
<&dma SUN4I_DMA_NORMAL 3>;
dma-names = "rx", "tx";
status = "disabled";
};
lradc: lradc@1c22800 {
compatible = "allwinner,sun4i-a10-lradc-keys";
reg = <0x01c22800 0x100>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
codec: codec@1c22c00 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun7i-a20-codec";
reg = <0x01c22c00 0x40>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
clock-names = "apb", "codec";
dmas = <&dma SUN4I_DMA_NORMAL 19>,
<&dma SUN4I_DMA_NORMAL 19>;
dma-names = "rx", "tx";
status = "disabled";
};
sid: eeprom@1c23800 {
compatible = "allwinner,sun7i-a20-sid";
reg = <0x01c23800 0x200>;
};
i2s2: i2s@1c24400 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun4i-a10-i2s";
reg = <0x01c24400 0x400>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB0_I2S2>, <&ccu CLK_I2S2>;
clock-names = "apb", "mod";
dmas = <&dma SUN4I_DMA_NORMAL 6>,
<&dma SUN4I_DMA_NORMAL 6>;
dma-names = "rx", "tx";
status = "disabled";
};
rtp: rtp@1c25000 {
compatible = "allwinner,sun5i-a13-ts";
reg = <0x01c25000 0x100>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <0>;
};
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_APB1_UART0>;
status = "disabled";
};
uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_APB1_UART1>;
status = "disabled";
};
uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_APB1_UART2>;
status = "disabled";
};
uart3: serial@1c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_APB1_UART3>;
status = "disabled";
};
uart4: serial@1c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_APB1_UART4>;
status = "disabled";
};
uart5: serial@1c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_APB1_UART5>;
status = "disabled";
};
uart6: serial@1c29800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29800 0x400>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_APB1_UART6>;
status = "disabled";
};
uart7: serial@1c29c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29c00 0x400>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu CLK_APB1_UART7>;
status = "disabled";
};
ps20: ps2@1c2a000 {
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a000 0x400>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1_PS20>;
status = "disabled";
};
ps21: ps2@1c2a400 {
compatible = "allwinner,sun4i-a10-ps2";
reg = <0x01c2a400 0x400>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1_PS21>;
status = "disabled";
};
i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@1c2b000 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c2: i2c@1c2b400 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c3: i2c@1c2b800 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2b800 0x400>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1_I2C3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
can0: can@1c2bc00 {
compatible = "allwinner,sun7i-a20-can",
"allwinner,sun4i-a10-can";
reg = <0x01c2bc00 0x400>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1_CAN>;
status = "disabled";
};
i2c4: i2c@1c2c000 {
compatible = "allwinner,sun7i-a20-i2c",
"allwinner,sun4i-a10-i2c";
reg = <0x01c2c000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1_I2C4>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mali: gpu@1c40000 {
compatible = "allwinner,sun7i-a20-mali", "arm,mali-400";
reg = <0x01c40000 0x10000>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "gp",
"gpmmu",
"pp0",
"ppmmu0",
"pp1",
"ppmmu1",
"pmu";
clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
clock-names = "bus", "core";
resets = <&ccu RST_GPU>;
assigned-clocks = <&ccu CLK_GPU>;
assigned-clock-rates = <384000000>;
};
gmac: ethernet@1c50000 {
compatible = "allwinner,sun7i-a20-gmac";
reg = <0x01c50000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&ccu CLK_AHB_GMAC>, <&gmac_tx_clk>;
clock-names = "stmmaceth", "allwinner_gmac_tx";
snps,pbl = <2>;
snps,fixed-burst;
snps,force_sf_dma_mode;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
hstimer@1c60000 {
compatible = "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_HSTIMER>;
};
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
fe0: display-frontend@1e00000 {
compatible = "allwinner,sun7i-a20-display-frontend";
reg = <0x01e00000 0x20000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
<&ccu CLK_DRAM_DE_FE0>;
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_DE_FE0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
fe0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
fe0_out_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_in_fe0>;
};
fe0_out_be1: endpoint@1 {
reg = <1>;
remote-endpoint = <&be1_in_fe0>;
};
};
};
};
fe1: display-frontend@1e20000 {
compatible = "allwinner,sun7i-a20-display-frontend";
reg = <0x01e20000 0x20000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
<&ccu CLK_DRAM_DE_FE1>;
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_DE_FE1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
fe1_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
fe1_out_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_in_fe1>;
};
fe1_out_be1: endpoint@1 {
reg = <1>;
remote-endpoint = <&be1_in_fe1>;
};
};
};
};
be1: display-backend@1e40000 {
compatible = "allwinner,sun7i-a20-display-backend";
reg = <0x01e40000 0x10000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
<&ccu CLK_DRAM_DE_BE1>;
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_DE_BE1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
be1_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
be1_in_fe0: endpoint@0 {
reg = <0>;
remote-endpoint = <&fe0_out_be1>;
};
be1_in_fe1: endpoint@1 {
reg = <1>;
remote-endpoint = <&fe1_out_be1>;
};
};
be1_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
be1_out_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_in_be1>;
};
be1_out_tcon1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon1_in_be1>;
};
};
};
};
be0: display-backend@1e60000 {
compatible = "allwinner,sun7i-a20-display-backend";
reg = <0x01e60000 0x10000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
<&ccu CLK_DRAM_DE_BE0>;
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_DE_BE0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
be0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
be0_in_fe0: endpoint@0 {
reg = <0>;
remote-endpoint = <&fe0_out_be0>;
};
be0_in_fe1: endpoint@1 {
reg = <1>;
remote-endpoint = <&fe1_out_be0>;
};
};
be0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
be0_out_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_in_be0>;
};
be0_out_tcon1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon1_in_be0>;
};
};
};
};
};
};