blob: f57f286a93c3e7540d8b2890d3eea6918d44b73d [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device tree file for Firefly Rockchip RK3288 Core board
* Copyright (c) 2016 Randy Li <ayaka@soulik.info>
*/
#include <dt-bindings/input/input.h>
#include "rk3288.dtsi"
/ {
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
ext_gmac: external-gmac-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <125000000>;
clock-output-names = "ext_gmac";
};
vcc_flash: flash-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_flash";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_io>;
};
};
&cpu0 {
cpu0-supply = <&vdd_cpu>;
};
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
vmmc-supply = <&vcc_io>;
vqmmc-supply = <&vcc_flash>;
status = "okay";
};
&gmac {
assigned-clocks = <&cru SCLK_MAC>;
assigned-clock-parents = <&ext_gmac>;
clock_in_out = "input";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "ok";
};
&i2c0 {
clock-frequency = <400000>;
status = "okay";
vdd_cpu: syr827@40 {
compatible = "silergy,syr827";
fcs,suspend-voltage-selector = <1>;
reg = <0x40>;
regulator-name = "vdd_cpu";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
regulator-enable-ramp-delay = <300>;
regulator-ramp-delay = <8000>;
vin-supply = <&vcc_sys>;
};
vdd_gpu: syr828@41 {
compatible = "silergy,syr828";
fcs,suspend-voltage-selector = <1>;
reg = <0x41>;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
vin-supply = <&vcc_sys>;
};
act8846: act8846@5a {
compatible = "active-semi,act8846";
reg = <0x5a>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
system-power-controller;
vp1-supply = <&vcc_sys>;
vp2-supply = <&vcc_sys>;
vp3-supply = <&vcc_sys>;
vp4-supply = <&vcc_sys>;
inl1-supply = <&vcc_sys>;
inl2-supply = <&vcc_sys>;
inl3-supply = <&vcc_20>;
regulators {
vcc_ddr: REG1 {
regulator-name = "vcc_ddr";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
vcc_io: REG2 {
regulator-name = "vcc_io";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_log: REG3 {
regulator-name = "vdd_log";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
vcc_20: REG4 {
regulator-name = "vcc_20";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
};
vccio_sd: REG5 {
regulator-name = "vccio_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vdd10_lcd: REG6 {
regulator-name = "vdd10_lcd";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
vcca_18: REG7 {
regulator-name = "vcca_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vcca_33: REG8 {
regulator-name = "vcca_33";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vcc_lan: REG9 {
regulator-name = "vcca_lan";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vdd_10: REG10 {
regulator-name = "vdd_10";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
vccio_wl: vcc_18: REG11 {
regulator-name = "vcc_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vcc18_lcd: REG12 {
regulator-name = "vcc18_lcd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
};
};
};
&io_domains {
status = "okay";
audio-supply = <&vccio_wl>;
bb-supply = <&vcc_io>;
dvp-supply = <&dovdd_1v8>;
flash0-supply = <&vcc_flash>;
flash1-supply = <&vcc_lan>;
gpio30-supply = <&vcc_io>;
gpio1830-supply = <&vcc_io>;
lcdc-supply = <&vcc_io>;
sdcard-supply = <&vccio_sd>;
wifi-supply = <&vccio_wl>;
};
&pinctrl {
pcfg_output_high: pcfg-output-high {
output-high;
};
pcfg_output_low: pcfg-output-low {
output-low;
};
pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
bias-pull-up;
drive-strength = <12>;
};
act8846 {
pwr_hold: pwr-hold {
rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>;
};
pmic_vsel: pmic-vsel {
rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>;
};
};
gmac {
phy_int: phy-int {
rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_pmeb: phy-pmeb {
rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_rst: phy-rst {
rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
};
};
};
&tsadc {
rockchip,hw-tshut-mode = <0>;
rockchip,hw-tshut-polarity = <0>;
status = "okay";
};
&vopb {
status = "okay";
};
&vopb_mmu {
status = "okay";
};
&vopl {
status = "okay";
};
&vopl_mmu {
status = "okay";
};
&wdt {
status = "okay";
};