blob: cb2d6d78a7fbf5d9a1ef3f70563fcb94f2ce8bef [file] [log] [blame]
#include <dt-bindings/power/raspberrypi-power.h>
/ {
memory {
device_type = "memory";
reg = <0 0x10000000>;
};
leds {
compatible = "gpio-leds";
act {
label = "ACT";
default-state = "keep";
linux,default-trigger = "heartbeat";
};
};
soc {
firmware: firmware {
compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
#address-cells = <0>;
#size-cells = <0>;
mboxes = <&mailbox>;
};
power: power {
compatible = "raspberrypi,bcm2835-power";
firmware = <&firmware>;
#power-domain-cells = <1>;
};
mailbox@7e00b840 {
compatible = "brcm,bcm2835-vchiq";
reg = <0x7e00b840 0xf>;
interrupts = <0 2>;
};
};
};
&gpio {
pinctrl-names = "default";
gpioout: gpioout {
brcm,pins = <6>;
brcm,function = <BCM2835_FSEL_GPIO_OUT>;
};
alt0: alt0 {
brcm,pins = <4 5 7 8 9 10 11>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_gpio0>;
status = "okay";
clock-frequency = <100000>;
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_gpio2>;
status = "okay";
clock-frequency = <100000>;
};
&i2c2 {
status = "okay";
};
&sdhci {
pinctrl-names = "default";
pinctrl-0 = <&emmc_gpio48>;
bus-width = <4>;
};
&sdhost {
pinctrl-names = "default";
pinctrl-0 = <&sdhost_gpio48>;
status = "okay";
bus-width = <4>;
};
&usb {
power-domains = <&power RPI_POWER_DOMAIN_USB>;
};
&v3d {
power-domains = <&power RPI_POWER_DOMAIN_V3D>;
};
&hdmi {
power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
status = "okay";
};
&vec {
power-domains = <&power RPI_POWER_DOMAIN_VEC>;
status = "okay";
};
&dsi0 {
power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
};
&dsi1 {
power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
};