blob: f3d58c7eb97e3accf7b3ee26988360ff81b8bc45 [file] [log] [blame]
/*
* Copyright © 2006 Keith Packard
* Copyright © 2007-2008 Dave Airlie
* Copyright © 2007-2008 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#ifndef __DRM_CRTC_H__
#define __DRM_CRTC_H__
#include <linux/i2c.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/idr.h>
#include <linux/fb.h>
#include <linux/hdmi.h>
#include <linux/media-bus-format.h>
#include <uapi/drm/drm_mode.h>
#include <uapi/drm/drm_fourcc.h>
#include <drm/drm_modeset_lock.h>
#include <drm/drm_rect.h>
#include <drm/drm_mode_object.h>
#include <drm/drm_framebuffer.h>
#include <drm/drm_modes.h>
#include <drm/drm_connector.h>
#include <drm/drm_encoder.h>
#include <drm/drm_property.h>
#include <drm/drm_bridge.h>
#include <drm/drm_edid.h>
#include <drm/drm_plane.h>
#include <drm/drm_blend.h>
#include <drm/drm_color_mgmt.h>
struct drm_device;
struct drm_mode_set;
struct drm_file;
struct drm_clip_rect;
struct device_node;
struct fence;
struct edid;
static inline int64_t U642I64(uint64_t val)
{
return (int64_t)*((int64_t *)&val);
}
static inline uint64_t I642U64(int64_t val)
{
return (uint64_t)*((uint64_t *)&val);
}
/* data corresponds to displayid vend/prod/serial */
struct drm_tile_group {
struct kref refcount;
struct drm_device *dev;
int id;
u8 group_data[8];
};
struct drm_crtc;
struct drm_encoder;
struct drm_pending_vblank_event;
struct drm_plane;
struct drm_bridge;
struct drm_atomic_state;
struct drm_crtc_helper_funcs;
struct drm_encoder_helper_funcs;
struct drm_plane_helper_funcs;
/**
* struct drm_crtc_state - mutable CRTC state
* @crtc: backpointer to the CRTC
* @enable: whether the CRTC should be enabled, gates all other state
* @active: whether the CRTC is actively displaying (used for DPMS)
* @planes_changed: planes on this crtc are updated
* @mode_changed: crtc_state->mode or crtc_state->enable has been changed
* @active_changed: crtc_state->active has been toggled.
* @connectors_changed: connectors to this crtc have been updated
* @zpos_changed: zpos values of planes on this crtc have been updated
* @color_mgmt_changed: color management properties have changed (degamma or
* gamma LUT or CSC matrix)
* @plane_mask: bitmask of (1 << drm_plane_index(plane)) of attached planes
* @connector_mask: bitmask of (1 << drm_connector_index(connector)) of attached connectors
* @encoder_mask: bitmask of (1 << drm_encoder_index(encoder)) of attached encoders
* @last_vblank_count: for helpers and drivers to capture the vblank of the
* update to ensure framebuffer cleanup isn't done too early
* @adjusted_mode: for use by helpers and drivers to compute adjusted mode timings
* @mode: current mode timings
* @mode_blob: &drm_property_blob for @mode
* @degamma_lut: Lookup table for converting framebuffer pixel data
* before apply the conversion matrix
* @ctm: Transformation matrix
* @gamma_lut: Lookup table for converting pixel data after the
* conversion matrix
* @state: backpointer to global drm_atomic_state
*
* Note that the distinction between @enable and @active is rather subtile:
* Flipping @active while @enable is set without changing anything else may
* never return in a failure from the ->atomic_check callback. Userspace assumes
* that a DPMS On will always succeed. In other words: @enable controls resource
* assignment, @active controls the actual hardware state.
*/
struct drm_crtc_state {
struct drm_crtc *crtc;
bool enable;
bool active;
/* computed state bits used by helpers and drivers */
bool planes_changed : 1;
bool mode_changed : 1;
bool active_changed : 1;
bool connectors_changed : 1;
bool zpos_changed : 1;
bool color_mgmt_changed : 1;
/* attached planes bitmask:
* WARNING: transitional helpers do not maintain plane_mask so
* drivers not converted over to atomic helpers should not rely
* on plane_mask being accurate!
*/
u32 plane_mask;
u32 connector_mask;
u32 encoder_mask;
/* last_vblank_count: for vblank waits before cleanup */
u32 last_vblank_count;
/* adjusted_mode: for use by helpers and drivers */
struct drm_display_mode adjusted_mode;
struct drm_display_mode mode;
/* blob property to expose current mode to atomic userspace */
struct drm_property_blob *mode_blob;
/* blob property to expose color management to userspace */
struct drm_property_blob *degamma_lut;
struct drm_property_blob *ctm;
struct drm_property_blob *gamma_lut;
/**
* @event:
*
* Optional pointer to a DRM event to signal upon completion of the
* state update. The driver must send out the event when the atomic
* commit operation completes. There are two cases:
*
* - The event is for a CRTC which is being disabled through this
* atomic commit. In that case the event can be send out any time
* after the hardware has stopped scanning out the current
* framebuffers. It should contain the timestamp and counter for the
* last vblank before the display pipeline was shut off.
*
* - For a CRTC which is enabled at the end of the commit (even when it
* undergoes an full modeset) the vblank timestamp and counter must
* be for the vblank right before the first frame that scans out the
* new set of buffers. Again the event can only be sent out after the
* hardware has stopped scanning out the old buffers.
*
* - Events for disabled CRTCs are not allowed, and drivers can ignore
* that case.
*
* This can be handled by the drm_crtc_send_vblank_event() function,
* which the driver should call on the provided event upon completion of
* the atomic commit. Note that if the driver supports vblank signalling
* and timestamping the vblank counters and timestamps must agree with
* the ones returned from page flip events. With the current vblank
* helper infrastructure this can be achieved by holding a vblank
* reference while the page flip is pending, acquired through
* drm_crtc_vblank_get() and released with drm_crtc_vblank_put().
* Drivers are free to implement their own vblank counter and timestamp
* tracking though, e.g. if they have accurate timestamp registers in
* hardware.
*
* For hardware which supports some means to synchronize vblank
* interrupt delivery with committing display state there's also
* drm_crtc_arm_vblank_event(). See the documentation of that function
* for a detailed discussion of the constraints it needs to be used
* safely.
*/
struct drm_pending_vblank_event *event;
struct drm_atomic_state *state;
};
/**
* struct drm_crtc_funcs - control CRTCs for a given device
*
* The drm_crtc_funcs structure is the central CRTC management structure
* in the DRM. Each CRTC controls one or more connectors (note that the name
* CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc.
* connectors, not just CRTs).
*
* Each driver is responsible for filling out this structure at startup time,
* in addition to providing other modesetting features, like i2c and DDC
* bus accessors.
*/
struct drm_crtc_funcs {
/**
* @reset:
*
* Reset CRTC hardware and software state to off. This function isn't
* called by the core directly, only through drm_mode_config_reset().
* It's not a helper hook only for historical reasons.
*
* Atomic drivers can use drm_atomic_helper_crtc_reset() to reset
* atomic state using this hook.
*/
void (*reset)(struct drm_crtc *crtc);
/**
* @cursor_set:
*
* Update the cursor image. The cursor position is relative to the CRTC
* and can be partially or fully outside of the visible area.
*
* Note that contrary to all other KMS functions the legacy cursor entry
* points don't take a framebuffer object, but instead take directly a
* raw buffer object id from the driver's buffer manager (which is
* either GEM or TTM for current drivers).
*
* This entry point is deprecated, drivers should instead implement
* universal plane support and register a proper cursor plane using
* drm_crtc_init_with_planes().
*
* This callback is optional
*
* RETURNS:
*
* 0 on success or a negative error code on failure.
*/
int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv,
uint32_t handle, uint32_t width, uint32_t height);
/**
* @cursor_set2:
*
* Update the cursor image, including hotspot information. The hotspot
* must not affect the cursor position in CRTC coordinates, but is only
* meant as a hint for virtualized display hardware to coordinate the
* guests and hosts cursor position. The cursor hotspot is relative to
* the cursor image. Otherwise this works exactly like @cursor_set.
*
* This entry point is deprecated, drivers should instead implement
* universal plane support and register a proper cursor plane using
* drm_crtc_init_with_planes().
*
* This callback is optional.
*
* RETURNS:
*
* 0 on success or a negative error code on failure.
*/
int (*cursor_set2)(struct drm_crtc *crtc, struct drm_file *file_priv,
uint32_t handle, uint32_t width, uint32_t height,
int32_t hot_x, int32_t hot_y);
/**
* @cursor_move:
*
* Update the cursor position. The cursor does not need to be visible
* when this hook is called.
*
* This entry point is deprecated, drivers should instead implement
* universal plane support and register a proper cursor plane using
* drm_crtc_init_with_planes().
*
* This callback is optional.
*
* RETURNS:
*
* 0 on success or a negative error code on failure.
*/
int (*cursor_move)(struct drm_crtc *crtc, int x, int y);
/**
* @gamma_set:
*
* Set gamma on the CRTC.
*
* This callback is optional.
*
* NOTE:
*
* Drivers that support gamma tables and also fbdev emulation through
* the provided helper library need to take care to fill out the gamma
* hooks for both. Currently there's a bit an unfortunate duplication
* going on, which should eventually be unified to just one set of
* hooks.
*/
int (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
uint32_t size);
/**
* @destroy:
*
* Clean up plane resources. This is only called at driver unload time
* through drm_mode_config_cleanup() since a CRTC cannot be hotplugged
* in DRM.
*/
void (*destroy)(struct drm_crtc *crtc);
/**
* @set_config:
*
* This is the main legacy entry point to change the modeset state on a
* CRTC. All the details of the desired configuration are passed in a
* struct &drm_mode_set - see there for details.
*
* Drivers implementing atomic modeset should use
* drm_atomic_helper_set_config() to implement this hook.
*
* RETURNS:
*
* 0 on success or a negative error code on failure.
*/
int (*set_config)(struct drm_mode_set *set);
/**
* @page_flip:
*
* Legacy entry point to schedule a flip to the given framebuffer.
*
* Page flipping is a synchronization mechanism that replaces the frame
* buffer being scanned out by the CRTC with a new frame buffer during
* vertical blanking, avoiding tearing (except when requested otherwise
* through the DRM_MODE_PAGE_FLIP_ASYNC flag). When an application
* requests a page flip the DRM core verifies that the new frame buffer
* is large enough to be scanned out by the CRTC in the currently
* configured mode and then calls the CRTC ->page_flip() operation with a
* pointer to the new frame buffer.
*
* The driver must wait for any pending rendering to the new framebuffer
* to complete before executing the flip. It should also wait for any
* pending rendering from other drivers if the underlying buffer is a
* shared dma-buf.
*
* An application can request to be notified when the page flip has
* completed. The drm core will supply a struct &drm_event in the event
* parameter in this case. This can be handled by the
* drm_crtc_send_vblank_event() function, which the driver should call on
* the provided event upon completion of the flip. Note that if
* the driver supports vblank signalling and timestamping the vblank
* counters and timestamps must agree with the ones returned from page
* flip events. With the current vblank helper infrastructure this can
* be achieved by holding a vblank reference while the page flip is
* pending, acquired through drm_crtc_vblank_get() and released with
* drm_crtc_vblank_put(). Drivers are free to implement their own vblank
* counter and timestamp tracking though, e.g. if they have accurate
* timestamp registers in hardware.
*
* This callback is optional.
*
* NOTE:
*
* Very early versions of the KMS ABI mandated that the driver must
* block (but not reject) any rendering to the old framebuffer until the
* flip operation has completed and the old framebuffer is no longer
* visible. This requirement has been lifted, and userspace is instead
* expected to request delivery of an event and wait with recycling old
* buffers until such has been received.
*
* RETURNS:
*
* 0 on success or a negative error code on failure. Note that if a
* ->page_flip() operation is already pending the callback should return
* -EBUSY. Pageflips on a disabled CRTC (either by setting a NULL mode
* or just runtime disabled through DPMS respectively the new atomic
* "ACTIVE" state) should result in an -EINVAL error code. Note that
* drm_atomic_helper_page_flip() checks this already for atomic drivers.
*/
int (*page_flip)(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event,
uint32_t flags);
/**
* @page_flip_target:
*
* Same as @page_flip but with an additional parameter specifying the
* absolute target vertical blank period (as reported by
* drm_crtc_vblank_count()) when the flip should take effect.
*
* Note that the core code calls drm_crtc_vblank_get before this entry
* point, and will call drm_crtc_vblank_put if this entry point returns
* any non-0 error code. It's the driver's responsibility to call
* drm_crtc_vblank_put after this entry point returns 0, typically when
* the flip completes.
*/
int (*page_flip_target)(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event,
uint32_t flags, uint32_t target);
/**
* @set_property:
*
* This is the legacy entry point to update a property attached to the
* CRTC.
*
* Drivers implementing atomic modeset should use
* drm_atomic_helper_crtc_set_property() to implement this hook.
*
* This callback is optional if the driver does not support any legacy
* driver-private properties.
*
* RETURNS:
*
* 0 on success or a negative error code on failure.
*/
int (*set_property)(struct drm_crtc *crtc,
struct drm_property *property, uint64_t val);
/**
* @atomic_duplicate_state:
*
* Duplicate the current atomic state for this CRTC and return it.
* The core and helpers gurantee that any atomic state duplicated with
* this hook and still owned by the caller (i.e. not transferred to the
* driver by calling ->atomic_commit() from struct
* &drm_mode_config_funcs) will be cleaned up by calling the
* @atomic_destroy_state hook in this structure.
*
* Atomic drivers which don't subclass struct &drm_crtc should use
* drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the
* state structure to extend it with driver-private state should use
* __drm_atomic_helper_crtc_duplicate_state() to make sure shared state is
* duplicated in a consistent fashion across drivers.
*
* It is an error to call this hook before crtc->state has been
* initialized correctly.
*
* NOTE:
*
* If the duplicate state references refcounted resources this hook must
* acquire a reference for each of them. The driver must release these
* references again in @atomic_destroy_state.
*
* RETURNS:
*
* Duplicated atomic state or NULL when the allocation failed.
*/
struct drm_crtc_state *(*atomic_duplicate_state)(struct drm_crtc *crtc);
/**
* @atomic_destroy_state:
*
* Destroy a state duplicated with @atomic_duplicate_state and release
* or unreference all resources it references
*/
void (*atomic_destroy_state)(struct drm_crtc *crtc,
struct drm_crtc_state *state);
/**
* @atomic_set_property:
*
* Decode a driver-private property value and store the decoded value
* into the passed-in state structure. Since the atomic core decodes all
* standardized properties (even for extensions beyond the core set of
* properties which might not be implemented by all drivers) this
* requires drivers to subclass the state structure.
*
* Such driver-private properties should really only be implemented for
* truly hardware/vendor specific state. Instead it is preferred to
* standardize atomic extension and decode the properties used to expose
* such an extension in the core.
*
* Do not call this function directly, use
* drm_atomic_crtc_set_property() instead.
*
* This callback is optional if the driver does not support any
* driver-private atomic properties.
*
* NOTE:
*
* This function is called in the state assembly phase of atomic
* modesets, which can be aborted for any reason (including on
* userspace's request to just check whether a configuration would be
* possible). Drivers MUST NOT touch any persistent state (hardware or
* software) or data structures except the passed in @state parameter.
*
* Also since userspace controls in which order properties are set this
* function must not do any input validation (since the state update is
* incomplete and hence likely inconsistent). Instead any such input
* validation must be done in the various atomic_check callbacks.
*
* RETURNS:
*
* 0 if the property has been found, -EINVAL if the property isn't
* implemented by the driver (which should never happen, the core only
* asks for properties attached to this CRTC). No other validation is
* allowed by the driver. The core already checks that the property
* value is within the range (integer, valid enum value, ...) the driver
* set when registering the property.
*/
int (*atomic_set_property)(struct drm_crtc *crtc,
struct drm_crtc_state *state,
struct drm_property *property,
uint64_t val);
/**
* @atomic_get_property:
*
* Reads out the decoded driver-private property. This is used to
* implement the GETCRTC IOCTL.
*
* Do not call this function directly, use
* drm_atomic_crtc_get_property() instead.
*
* This callback is optional if the driver does not support any
* driver-private atomic properties.
*
* RETURNS:
*
* 0 on success, -EINVAL if the property isn't implemented by the
* driver (which should never happen, the core only asks for
* properties attached to this CRTC).
*/
int (*atomic_get_property)(struct drm_crtc *crtc,
const struct drm_crtc_state *state,
struct drm_property *property,
uint64_t *val);
/**
* @late_register:
*
* This optional hook can be used to register additional userspace
* interfaces attached to the crtc like debugfs interfaces.
* It is called late in the driver load sequence from drm_dev_register().
* Everything added from this callback should be unregistered in
* the early_unregister callback.
*
* Returns:
*
* 0 on success, or a negative error code on failure.
*/
int (*late_register)(struct drm_crtc *crtc);
/**
* @early_unregister:
*
* This optional hook should be used to unregister the additional
* userspace interfaces attached to the crtc from
* late_unregister(). It is called from drm_dev_unregister(),
* early in the driver unload sequence to disable userspace access
* before data structures are torndown.
*/
void (*early_unregister)(struct drm_crtc *crtc);
};
/**
* struct drm_crtc - central CRTC control structure
* @dev: parent DRM device
* @port: OF node used by drm_of_find_possible_crtcs()
* @head: list management
* @name: human readable name, can be overwritten by the driver
* @mutex: per-CRTC locking
* @base: base KMS object for ID tracking etc.
* @primary: primary plane for this CRTC
* @cursor: cursor plane for this CRTC
* @cursor_x: current x position of the cursor, used for universal cursor planes
* @cursor_y: current y position of the cursor, used for universal cursor planes
* @enabled: is this CRTC enabled?
* @mode: current mode timings
* @hwmode: mode timings as programmed to hw regs
* @x: x position on screen
* @y: y position on screen
* @funcs: CRTC control functions
* @gamma_size: size of gamma ramp
* @gamma_store: gamma ramp values
* @helper_private: mid-layer private data
* @properties: property tracking for this CRTC
*
* Each CRTC may have one or more connectors associated with it. This structure
* allows the CRTC to be controlled.
*/
struct drm_crtc {
struct drm_device *dev;
struct device_node *port;
struct list_head head;
char *name;
/**
* @mutex:
*
* This provides a read lock for the overall crtc state (mode, dpms
* state, ...) and a write lock for everything which can be update
* without a full modeset (fb, cursor data, crtc properties ...). Full
* modeset also need to grab dev->mode_config.connection_mutex.
*/
struct drm_modeset_lock mutex;
struct drm_mode_object base;
/* primary and cursor planes for CRTC */
struct drm_plane *primary;
struct drm_plane *cursor;
/**
* @index: Position inside the mode_config.list, can be used as an array
* index. It is invariant over the lifetime of the CRTC.
*/
unsigned index;
/* position of cursor plane on crtc */
int cursor_x;
int cursor_y;
bool enabled;
/* Requested mode from modesetting. */
struct drm_display_mode mode;
/* Programmed mode in hw, after adjustments for encoders,
* crtc, panel scaling etc. Needed for timestamping etc.
*/
struct drm_display_mode hwmode;
int x, y;
const struct drm_crtc_funcs *funcs;
/* Legacy FB CRTC gamma size for reporting to userspace */
uint32_t gamma_size;
uint16_t *gamma_store;
/* if you are using the helper */
const struct drm_crtc_helper_funcs *helper_private;
struct drm_object_properties properties;
/**
* @state:
*
* Current atomic state for this CRTC.
*/
struct drm_crtc_state *state;
/**
* @commit_list:
*
* List of &drm_crtc_commit structures tracking pending commits.
* Protected by @commit_lock. This list doesn't hold its own full
* reference, but burrows it from the ongoing commit. Commit entries
* must be removed from this list once the commit is fully completed,
* but before it's correspoding &drm_atomic_state gets destroyed.
*/
struct list_head commit_list;
/**
* @commit_lock:
*
* Spinlock to protect @commit_list.
*/
spinlock_t commit_lock;
/**
* @acquire_ctx:
*
* Per-CRTC implicit acquire context used by atomic drivers for legacy
* IOCTLs, so that atomic drivers can get at the locking acquire
* context.
*/
struct drm_modeset_acquire_ctx *acquire_ctx;
/**
* @fence_context:
*
* timeline context used for fence operations.
*/
unsigned int fence_context;
/**
* @fence_lock:
*
* spinlock to protect the fences in the fence_context.
*/
spinlock_t fence_lock;
/**
* @fence_seqno:
*
* Seqno variable used as monotonic counter for the fences
* created on the CRTC's timeline.
*/
unsigned long fence_seqno;
/**
* @timeline_name:
*
* The name of the CRTC's fence timeline.
*/
char timeline_name[32];
};
/**
* struct drm_mode_set - new values for a CRTC config change
* @fb: framebuffer to use for new config
* @crtc: CRTC whose configuration we're about to change
* @mode: mode timings to use
* @x: position of this CRTC relative to @fb
* @y: position of this CRTC relative to @fb
* @connectors: array of connectors to drive with this CRTC if possible
* @num_connectors: size of @connectors array
*
* Represents a single crtc the connectors that it drives with what mode
* and from which framebuffer it scans out from.
*
* This is used to set modes.
*/
struct drm_mode_set {
struct drm_framebuffer *fb;
struct drm_crtc *crtc;
struct drm_display_mode *mode;
uint32_t x;
uint32_t y;
struct drm_connector **connectors;
size_t num_connectors;
};
/**
* struct drm_mode_config_funcs - basic driver provided mode setting functions
*
* Some global (i.e. not per-CRTC, connector, etc) mode setting functions that
* involve drivers.
*/
struct drm_mode_config_funcs {
/**
* @fb_create:
*
* Create a new framebuffer object. The core does basic checks on the
* requested metadata, but most of that is left to the driver. See
* struct &drm_mode_fb_cmd2 for details.
*
* If the parameters are deemed valid and the backing storage objects in
* the underlying memory manager all exist, then the driver allocates
* a new &drm_framebuffer structure, subclassed to contain
* driver-specific information (like the internal native buffer object
* references). It also needs to fill out all relevant metadata, which
* should be done by calling drm_helper_mode_fill_fb_struct().
*
* The initialization is finalized by calling drm_framebuffer_init(),
* which registers the framebuffer and makes it accessible to other
* threads.
*
* RETURNS:
*
* A new framebuffer with an initial reference count of 1 or a negative
* error code encoded with ERR_PTR().
*/
struct drm_framebuffer *(*fb_create)(struct drm_device *dev,
struct drm_file *file_priv,
const struct drm_mode_fb_cmd2 *mode_cmd);
/**
* @output_poll_changed:
*
* Callback used by helpers to inform the driver of output configuration
* changes.
*
* Drivers implementing fbdev emulation with the helpers can call
* drm_fb_helper_hotplug_changed from this hook to inform the fbdev
* helper of output changes.
*
* FIXME:
*
* Except that there's no vtable for device-level helper callbacks
* there's no reason this is a core function.
*/
void (*output_poll_changed)(struct drm_device *dev);
/**
* @atomic_check:
*
* This is the only hook to validate an atomic modeset update. This
* function must reject any modeset and state changes which the hardware
* or driver doesn't support. This includes but is of course not limited
* to:
*
* - Checking that the modes, framebuffers, scaling and placement
* requirements and so on are within the limits of the hardware.
*
* - Checking that any hidden shared resources are not oversubscribed.
* This can be shared PLLs, shared lanes, overall memory bandwidth,
* display fifo space (where shared between planes or maybe even
* CRTCs).
*
* - Checking that virtualized resources exported to userspace are not
* oversubscribed. For various reasons it can make sense to expose
* more planes, crtcs or encoders than which are physically there. One
* example is dual-pipe operations (which generally should be hidden
* from userspace if when lockstepped in hardware, exposed otherwise),
* where a plane might need 1 hardware plane (if it's just on one
* pipe), 2 hardware planes (when it spans both pipes) or maybe even
* shared a hardware plane with a 2nd plane (if there's a compatible
* plane requested on the area handled by the other pipe).
*
* - Check that any transitional state is possible and that if
* requested, the update can indeed be done in the vblank period
* without temporarily disabling some functions.
*
* - Check any other constraints the driver or hardware might have.
*
* - This callback also needs to correctly fill out the &drm_crtc_state
* in this update to make sure that drm_atomic_crtc_needs_modeset()
* reflects the nature of the possible update and returns true if and
* only if the update cannot be applied without tearing within one
* vblank on that CRTC. The core uses that information to reject
* updates which require a full modeset (i.e. blanking the screen, or
* at least pausing updates for a substantial amount of time) if
* userspace has disallowed that in its request.
*
* - The driver also does not need to repeat basic input validation
* like done for the corresponding legacy entry points. The core does
* that before calling this hook.
*
* See the documentation of @atomic_commit for an exhaustive list of
* error conditions which don't have to be checked at the
* ->atomic_check() stage?
*
* See the documentation for struct &drm_atomic_state for how exactly
* an atomic modeset update is described.
*
* Drivers using the atomic helpers can implement this hook using
* drm_atomic_helper_check(), or one of the exported sub-functions of
* it.
*
* RETURNS:
*
* 0 on success or one of the below negative error codes:
*
* - -EINVAL, if any of the above constraints are violated.
*
* - -EDEADLK, when returned from an attempt to acquire an additional
* &drm_modeset_lock through drm_modeset_lock().
*
* - -ENOMEM, if allocating additional state sub-structures failed due
* to lack of memory.
*
* - -EINTR, -EAGAIN or -ERESTARTSYS, if the IOCTL should be restarted.
* This can either be due to a pending signal, or because the driver
* needs to completely bail out to recover from an exceptional
* situation like a GPU hang. From a userspace point all errors are
* treated equally.
*/
int (*atomic_check)(struct drm_device *dev,
struct drm_atomic_state *state);
/**
* @atomic_commit:
*
* This is the only hook to commit an atomic modeset update. The core
* guarantees that @atomic_check has been called successfully before
* calling this function, and that nothing has been changed in the
* interim.
*
* See the documentation for struct &drm_atomic_state for how exactly
* an atomic modeset update is described.
*
* Drivers using the atomic helpers can implement this hook using
* drm_atomic_helper_commit(), or one of the exported sub-functions of
* it.
*
* Nonblocking commits (as indicated with the nonblock parameter) must
* do any preparatory work which might result in an unsuccessful commit
* in the context of this callback. The only exceptions are hardware
* errors resulting in -EIO. But even in that case the driver must
* ensure that the display pipe is at least running, to avoid
* compositors crashing when pageflips don't work. Anything else,
* specifically committing the update to the hardware, should be done
* without blocking the caller. For updates which do not require a
* modeset this must be guaranteed.
*
* The driver must wait for any pending rendering to the new
* framebuffers to complete before executing the flip. It should also
* wait for any pending rendering from other drivers if the underlying
* buffer is a shared dma-buf. Nonblocking commits must not wait for
* rendering in the context of this callback.
*
* An application can request to be notified when the atomic commit has
* completed. These events are per-CRTC and can be distinguished by the
* CRTC index supplied in &drm_event to userspace.
*
* The drm core will supply a struct &drm_event in the event
* member of each CRTC's &drm_crtc_state structure. See the
* documentation for &drm_crtc_state for more details about the precise
* semantics of this event.
*
* NOTE:
*
* Drivers are not allowed to shut down any display pipe successfully
* enabled through an atomic commit on their own. Doing so can result in
* compositors crashing if a page flip is suddenly rejected because the
* pipe is off.
*
* RETURNS:
*
* 0 on success or one of the below negative error codes:
*
* - -EBUSY, if a nonblocking updated is requested and there is
* an earlier updated pending. Drivers are allowed to support a queue
* of outstanding updates, but currently no driver supports that.
* Note that drivers must wait for preceding updates to complete if a
* synchronous update is requested, they are not allowed to fail the
* commit in that case.
*
* - -ENOMEM, if the driver failed to allocate memory. Specifically
* this can happen when trying to pin framebuffers, which must only
* be done when committing the state.
*
* - -ENOSPC, as a refinement of the more generic -ENOMEM to indicate
* that the driver has run out of vram, iommu space or similar GPU
* address space needed for framebuffer.
*
* - -EIO, if the hardware completely died.
*
* - -EINTR, -EAGAIN or -ERESTARTSYS, if the IOCTL should be restarted.
* This can either be due to a pending signal, or because the driver
* needs to completely bail out to recover from an exceptional
* situation like a GPU hang. From a userspace point of view all errors are
* treated equally.
*
* This list is exhaustive. Specifically this hook is not allowed to
* return -EINVAL (any invalid requests should be caught in
* @atomic_check) or -EDEADLK (this function must not acquire
* additional modeset locks).
*/
int (*atomic_commit)(struct drm_device *dev,
struct drm_atomic_state *state,
bool nonblock);
/**
* @atomic_state_alloc:
*
* This optional hook can be used by drivers that want to subclass struct
* &drm_atomic_state to be able to track their own driver-private global
* state easily. If this hook is implemented, drivers must also
* implement @atomic_state_clear and @atomic_state_free.
*
* RETURNS:
*
* A new &drm_atomic_state on success or NULL on failure.
*/
struct drm_atomic_state *(*atomic_state_alloc)(struct drm_device *dev);
/**
* @atomic_state_clear:
*
* This hook must clear any driver private state duplicated into the
* passed-in &drm_atomic_state. This hook is called when the caller
* encountered a &drm_modeset_lock deadlock and needs to drop all
* already acquired locks as part of the deadlock avoidance dance
* implemented in drm_modeset_lock_backoff().
*
* Any duplicated state must be invalidated since a concurrent atomic
* update might change it, and the drm atomic interfaces always apply
* updates as relative changes to the current state.
*
* Drivers that implement this must call drm_atomic_state_default_clear()
* to clear common state.
*/
void (*atomic_state_clear)(struct drm_atomic_state *state);
/**
* @atomic_state_free:
*
* This hook needs driver private resources and the &drm_atomic_state
* itself. Note that the core first calls drm_atomic_state_clear() to
* avoid code duplicate between the clear and free hooks.
*
* Drivers that implement this must call drm_atomic_state_default_free()
* to release common resources.
*/
void (*atomic_state_free)(struct drm_atomic_state *state);
};
/**
* struct drm_mode_config - Mode configuration control structure
* @mutex: mutex protecting KMS related lists and structures
* @connection_mutex: ww mutex protecting connector state and routing
* @acquire_ctx: global implicit acquire context used by atomic drivers for
* legacy IOCTLs
* @fb_lock: mutex to protect fb state and lists
* @num_fb: number of fbs available
* @fb_list: list of framebuffers available
* @num_encoder: number of encoders on this device
* @encoder_list: list of encoder objects
* @num_overlay_plane: number of overlay planes on this device
* @num_total_plane: number of universal (i.e. with primary/curso) planes on this device
* @plane_list: list of plane objects
* @num_crtc: number of CRTCs on this device
* @crtc_list: list of CRTC objects
* @property_list: list of property objects
* @min_width: minimum pixel width on this device
* @min_height: minimum pixel height on this device
* @max_width: maximum pixel width on this device
* @max_height: maximum pixel height on this device
* @funcs: core driver provided mode setting functions
* @fb_base: base address of the framebuffer
* @poll_enabled: track polling support for this device
* @poll_running: track polling status for this device
* @delayed_event: track delayed poll uevent deliver for this device
* @output_poll_work: delayed work for polling in process context
* @property_blob_list: list of all the blob property objects
* @blob_lock: mutex for blob property allocation and management
* @*_property: core property tracking
* @preferred_depth: preferred RBG pixel depth, used by fb helpers
* @prefer_shadow: hint to userspace to prefer shadow-fb rendering
* @cursor_width: hint to userspace for max cursor width
* @cursor_height: hint to userspace for max cursor height
* @helper_private: mid-layer private data
*
* Core mode resource tracking structure. All CRTC, encoders, and connectors
* enumerated by the driver are added here, as are global properties. Some
* global restrictions are also here, e.g. dimension restrictions.
*/
struct drm_mode_config {
struct mutex mutex; /* protects configuration (mode lists etc.) */
struct drm_modeset_lock connection_mutex; /* protects connector->encoder and encoder->crtc links */
struct drm_modeset_acquire_ctx *acquire_ctx; /* for legacy _lock_all() / _unlock_all() */
/**
* @idr_mutex:
*
* Mutex for KMS ID allocation and management. Protects both @crtc_idr
* and @tile_idr.
*/
struct mutex idr_mutex;
/**
* @crtc_idr:
*
* Main KMS ID tracking object. Use this idr for all IDs, fb, crtc,
* connector, modes - just makes life easier to have only one.
*/
struct idr crtc_idr;
/**
* @tile_idr:
*
* Use this idr for allocating new IDs for tiled sinks like use in some
* high-res DP MST screens.
*/
struct idr tile_idr;
struct mutex fb_lock; /* proctects global and per-file fb lists */
int num_fb;
struct list_head fb_list;
/**
* @num_connector: Number of connectors on this device.
*/
int num_connector;
/**
* @connector_ida: ID allocator for connector indices.
*/
struct ida connector_ida;
/**
* @connector_list: List of connector objects.
*/
struct list_head connector_list;
int num_encoder;
struct list_head encoder_list;
/*
* Track # of overlay planes separately from # of total planes. By
* default we only advertise overlay planes to userspace; if userspace
* sets the "universal plane" capability bit, we'll go ahead and
* expose all planes.
*/
int num_overlay_plane;
int num_total_plane;
struct list_head plane_list;
int num_crtc;
struct list_head crtc_list;
struct list_head property_list;
int min_width, min_height;
int max_width, max_height;
const struct drm_mode_config_funcs *funcs;
resource_size_t fb_base;
/* output poll support */
bool poll_enabled;
bool poll_running;
bool delayed_event;
struct delayed_work output_poll_work;
struct mutex blob_lock;
/* pointers to standard properties */
struct list_head property_blob_list;
/**
* @edid_property: Default connector property to hold the EDID of the
* currently connected sink, if any.
*/
struct drm_property *edid_property;
/**
* @dpms_property: Default connector property to control the
* connector's DPMS state.
*/
struct drm_property *dpms_property;
/**
* @path_property: Default connector property to hold the DP MST path
* for the port.
*/
struct drm_property *path_property;
/**
* @tile_property: Default connector property to store the tile
* position of a tiled screen, for sinks which need to be driven with
* multiple CRTCs.
*/
struct drm_property *tile_property;
/**
* @plane_type_property: Default plane property to differentiate
* CURSOR, PRIMARY and OVERLAY legacy uses of planes.
*/
struct drm_property *plane_type_property;
/**
* @rotation_property: Optional property for planes or CRTCs to specifiy
* rotation.
*/
struct drm_property *rotation_property;
/**
* @prop_src_x: Default atomic plane property for the plane source
* position in the connected &drm_framebuffer.
*/
struct drm_property *prop_src_x;
/**
* @prop_src_y: Default atomic plane property for the plane source
* position in the connected &drm_framebuffer.
*/
struct drm_property *prop_src_y;
/**
* @prop_src_w: Default atomic plane property for the plane source
* position in the connected &drm_framebuffer.
*/
struct drm_property *prop_src_w;
/**
* @prop_src_h: Default atomic plane property for the plane source
* position in the connected &drm_framebuffer.
*/
struct drm_property *prop_src_h;
/**
* @prop_crtc_x: Default atomic plane property for the plane destination
* position in the &drm_crtc is is being shown on.
*/
struct drm_property *prop_crtc_x;
/**
* @prop_crtc_y: Default atomic plane property for the plane destination
* position in the &drm_crtc is is being shown on.
*/
struct drm_property *prop_crtc_y;
/**
* @prop_crtc_w: Default atomic plane property for the plane destination
* position in the &drm_crtc is is being shown on.
*/
struct drm_property *prop_crtc_w;
/**
* @prop_crtc_h: Default atomic plane property for the plane destination
* position in the &drm_crtc is is being shown on.
*/
struct drm_property *prop_crtc_h;
/**
* @prop_fb_id: Default atomic plane property to specify the
* &drm_framebuffer.
*/
struct drm_property *prop_fb_id;
/**
* @prop_in_fence_fd: Sync File fd representing the incoming fences
* for a Plane.
*/
struct drm_property *prop_in_fence_fd;
/**
* @prop_out_fence_ptr: Sync File fd pointer representing the
* outgoing fences for a CRTC. Userspace should provide a pointer to a
* value of type s32, and then cast that pointer to u64.
*/
struct drm_property *prop_out_fence_ptr;
/**
* @prop_crtc_id: Default atomic plane property to specify the
* &drm_crtc.
*/
struct drm_property *prop_crtc_id;
/**
* @prop_active: Default atomic CRTC property to control the active
* state, which is the simplified implementation for DPMS in atomic
* drivers.
*/
struct drm_property *prop_active;
/**
* @prop_mode_id: Default atomic CRTC property to set the mode for a
* CRTC. A 0 mode implies that the CRTC is entirely disabled - all
* connectors must be of and active must be set to disabled, too.
*/
struct drm_property *prop_mode_id;
/**
* @dvi_i_subconnector_property: Optional DVI-I property to
* differentiate between analog or digital mode.
*/
struct drm_property *dvi_i_subconnector_property;
/**
* @dvi_i_select_subconnector_property: Optional DVI-I property to
* select between analog or digital mode.
*/
struct drm_property *dvi_i_select_subconnector_property;
/**
* @tv_subconnector_property: Optional TV property to differentiate
* between different TV connector types.
*/
struct drm_property *tv_subconnector_property;
/**
* @tv_select_subconnector_property: Optional TV property to select
* between different TV connector types.
*/
struct drm_property *tv_select_subconnector_property;
/**
* @tv_mode_property: Optional TV property to select
* the output TV mode.
*/
struct drm_property *tv_mode_property;
/**
* @tv_left_margin_property: Optional TV property to set the left
* margin.
*/
struct drm_property *tv_left_margin_property;
/**
* @tv_right_margin_property: Optional TV property to set the right
* margin.
*/
struct drm_property *tv_right_margin_property;
/**
* @tv_top_margin_property: Optional TV property to set the right
* margin.
*/
struct drm_property *tv_top_margin_property;
/**
* @tv_bottom_margin_property: Optional TV property to set the right
* margin.
*/
struct drm_property *tv_bottom_margin_property;
/**
* @tv_brightness_property: Optional TV property to set the
* brightness.
*/
struct drm_property *tv_brightness_property;
/**
* @tv_contrast_property: Optional TV property to set the
* contrast.
*/
struct drm_property *tv_contrast_property;
/**
* @tv_flicker_reduction_property: Optional TV property to control the
* flicker reduction mode.
*/
struct drm_property *tv_flicker_reduction_property;
/**
* @tv_overscan_property: Optional TV property to control the overscan
* setting.
*/
struct drm_property *tv_overscan_property;
/**
* @tv_saturation_property: Optional TV property to set the
* saturation.
*/
struct drm_property *tv_saturation_property;
/**
* @tv_hue_property: Optional TV property to set the hue.
*/
struct drm_property *tv_hue_property;
/**
* @scaling_mode_property: Optional connector property to control the
* upscaling, mostly used for built-in panels.
*/
struct drm_property *scaling_mode_property;
/**
* @aspect_ratio_property: Optional connector property to control the
* HDMI infoframe aspect ratio setting.
*/
struct drm_property *aspect_ratio_property;
/**
* @degamma_lut_property: Optional CRTC property to set the LUT used to
* convert the framebuffer's colors to linear gamma.
*/
struct drm_property *degamma_lut_property;
/**
* @degamma_lut_size_property: Optional CRTC property for the size of
* the degamma LUT as supported by the driver (read-only).
*/
struct drm_property *degamma_lut_size_property;
/**
* @ctm_property: Optional CRTC property to set the
* matrix used to convert colors after the lookup in the
* degamma LUT.
*/
struct drm_property *ctm_property;
/**
* @gamma_lut_property: Optional CRTC property to set the LUT used to
* convert the colors, after the CTM matrix, to the gamma space of the
* connected screen.
*/
struct drm_property *gamma_lut_property;
/**
* @gamma_lut_size_property: Optional CRTC property for the size of the
* gamma LUT as supported by the driver (read-only).
*/
struct drm_property *gamma_lut_size_property;
/**
* @suggested_x_property: Optional connector property with a hint for
* the position of the output on the host's screen.
*/
struct drm_property *suggested_x_property;
/**
* @suggested_y_property: Optional connector property with a hint for
* the position of the output on the host's screen.
*/
struct drm_property *suggested_y_property;
/* dumb ioctl parameters */
uint32_t preferred_depth, prefer_shadow;
/**
* @async_page_flip: Does this device support async flips on the primary
* plane?
*/
bool async_page_flip;
/**
* @allow_fb_modifiers:
*
* Whether the driver supports fb modifiers in the ADDFB2.1 ioctl call.
*/
bool allow_fb_modifiers;
/* cursor size */
uint32_t cursor_width, cursor_height;
struct drm_mode_config_helper_funcs *helper_private;
};
#define obj_to_crtc(x) container_of(x, struct drm_crtc, base)
extern __printf(6, 7)
int drm_crtc_init_with_planes(struct drm_device *dev,
struct drm_crtc *crtc,
struct drm_plane *primary,
struct drm_plane *cursor,
const struct drm_crtc_funcs *funcs,
const char *name, ...);
extern void drm_crtc_cleanup(struct drm_crtc *crtc);
/**
* drm_crtc_index - find the index of a registered CRTC
* @crtc: CRTC to find index for
*
* Given a registered CRTC, return the index of that CRTC within a DRM
* device's list of CRTCs.
*/
static inline unsigned int drm_crtc_index(const struct drm_crtc *crtc)
{
return crtc->index;
}
/**
* drm_crtc_mask - find the mask of a registered CRTC
* @crtc: CRTC to find mask for
*
* Given a registered CRTC, return the mask bit of that CRTC for an
* encoder's possible_crtcs field.
*/
static inline uint32_t drm_crtc_mask(struct drm_crtc *crtc)
{
return 1 << drm_crtc_index(crtc);
}
extern void drm_crtc_get_hv_timing(const struct drm_display_mode *mode,
int *hdisplay, int *vdisplay);
extern int drm_crtc_force_disable(struct drm_crtc *crtc);
extern int drm_crtc_force_disable_all(struct drm_device *dev);
extern void drm_mode_config_init(struct drm_device *dev);
extern void drm_mode_config_reset(struct drm_device *dev);
extern void drm_mode_config_cleanup(struct drm_device *dev);
extern int drm_mode_set_config_internal(struct drm_mode_set *set);
extern struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev,
char topology[8]);
extern struct drm_tile_group *drm_mode_get_tile_group(struct drm_device *dev,
char topology[8]);
extern void drm_mode_put_tile_group(struct drm_device *dev,
struct drm_tile_group *tg);
/* Helpers */
static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
uint32_t id)
{
struct drm_mode_object *mo;
mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_CRTC);
return mo ? obj_to_crtc(mo) : NULL;
}
#define drm_for_each_crtc(crtc, dev) \
list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head)
static inline void
assert_drm_connector_list_read_locked(struct drm_mode_config *mode_config)
{
/*
* The connector hotadd/remove code currently grabs both locks when
* updating lists. Hence readers need only hold either of them to be
* safe and the check amounts to
*
* WARN_ON(not_holding(A) && not_holding(B)).
*/
WARN_ON(!mutex_is_locked(&mode_config->mutex) &&
!drm_modeset_is_locked(&mode_config->connection_mutex));
}
#endif /* __DRM_CRTC_H__ */