include/drv_conf.h - kernel/amlogic-tv-modules/wifi_rtl8822BS - Git at Google

 /******************************************************************************
  *
  * Copyright(c) 2007 - 2017 Realtek Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
  * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
  * more details.
  *
  *****************************************************************************/
 #ifndef __DRV_CONF_H__
 #define __DRV_CONF_H__
 #include "autoconf.h"
 #include "hal_ic_cfg.h"

 #if defined(PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)

 	#error "Shall be Linux or Windows, but not both!\n"

 #endif

 #ifdef CONFIG_RTW_REPEATER_SON
 	#ifndef CONFIG_AP
 		#define CONFIG_AP
 	#endif
 	#ifndef CONFIG_CONCURRENT_MODE
 		#define CONFIG_CONCURRENT_MODE
 	#endif
 	#ifndef CONFIG_BR_EXT
 		#define CONFIG_BR_EXT
 	#endif
 	#ifndef CONFIG_RTW_REPEATER_SON_ID
 		#define CONFIG_RTW_REPEATER_SON_ID			0x02040608
 	#endif
 	//#define CONFIG_RTW_REPEATER_SON_ROOT
 	#ifndef CONFIG_RTW_REPEATER_SON_ROOT
 		#define CONFIG_LAYER2_ROAMING_ACTIVE
 	#endif
 	#undef CONFIG_POWER_SAVING
 #endif

 #if defined(CONFIG_MCC_MODE) && (!defined(CONFIG_CONCURRENT_MODE))

 	#error "Enable CONCURRENT_MODE before enable MCC MODE\n"

 #endif

 #if defined(CONFIG_MCC_MODE) && defined(CONFIG_BT_COEXIST)

 	#error "Disable BT COEXIST before enable MCC MODE\n"

 #endif

 #if defined(CONFIG_MCC_MODE) && defined(CONFIG_TDLS)

 	#error "Disable TDLS before enable MCC MODE\n"

 #endif

 #if defined(CONFIG_RTW_80211R) && !defined(CONFIG_LAYER2_ROAMING)

 	#error "Enable CONFIG_LAYER2_ROAMING before enable CONFIG_RTW_80211R\n"

 #endif

 /* Older Android kernel doesn't has CONFIG_ANDROID defined,
  * add this to force CONFIG_ANDROID defined */
 #ifdef CONFIG_PLATFORM_ANDROID
 	#ifndef CONFIG_ANDROID
 		#define CONFIG_ANDROID
 	#endif
 #endif

 #ifdef CONFIG_ANDROID
 	/* Some Android build will restart the UI while non-printable ascii is passed
 	* between java and c/c++ layer (JNI). We force CONFIG_VALIDATE_SSID
 	* for Android here. If you are sure there is no risk on your system about this,
 	* mask this macro define to support non-printable ascii ssid.
 	* #define CONFIG_VALIDATE_SSID */

 	/* Android expect dbm as the rx signal strength unit */
 	#define CONFIG_SIGNAL_DISPLAY_DBM
 #endif

 /*
 #if defined(CONFIG_HAS_EARLYSUSPEND) && defined(CONFIG_RESUME_IN_WORKQUEUE)
 	#warning "You have CONFIG_HAS_EARLYSUSPEND enabled in your system, we disable CONFIG_RESUME_IN_WORKQUEUE automatically"
 	#undef CONFIG_RESUME_IN_WORKQUEUE
 #endif

 #if defined(CONFIG_ANDROID_POWER) && defined(CONFIG_RESUME_IN_WORKQUEUE)
 	#warning "You have CONFIG_ANDROID_POWER enabled in your system, we disable CONFIG_RESUME_IN_WORKQUEUE automatically"
 	#undef CONFIG_RESUME_IN_WORKQUEUE
 #endif
 */

 #ifdef CONFIG_RESUME_IN_WORKQUEUE /* this can be removed, because there is no case for this... */
 	#if !defined(CONFIG_WAKELOCK) && !defined(CONFIG_ANDROID_POWER)
 		#error "enable CONFIG_RESUME_IN_WORKQUEUE without CONFIG_WAKELOCK or CONFIG_ANDROID_POWER will suffer from the danger of wifi's unfunctionality..."
 		#error "If you still want to enable CONFIG_RESUME_IN_WORKQUEUE in this case, mask this preprossor checking and GOOD LUCK..."
 	#endif
 #endif

 /* About USB VENDOR REQ */
 #if defined(CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC) && !defined(CONFIG_USB_VENDOR_REQ_MUTEX)
 	#warning "define CONFIG_USB_VENDOR_REQ_MUTEX for CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC automatically"
 	#define CONFIG_USB_VENDOR_REQ_MUTEX
 #endif
 #if defined(CONFIG_VENDOR_REQ_RETRY) &&  !defined(CONFIG_USB_VENDOR_REQ_MUTEX)
 	#warning "define CONFIG_USB_VENDOR_REQ_MUTEX for CONFIG_VENDOR_REQ_RETRY automatically"
 	#define CONFIG_USB_VENDOR_REQ_MUTEX
 #endif

 #if !defined(CONFIG_AP_MODE) && defined(CONFIG_DFS_MASTER)
 	#warning "undef CONFIG_DFS_MASTER because CONFIG_AP_MODE is not defined"
 	#undef CONFIG_DFS_MASTER
 #endif

 #if !defined(CONFIG_SCAN_BACKOP) && defined(CONFIG_AP_MODE)
 #define CONFIG_SCAN_BACKOP
 #endif

 #define RTW_SCAN_SPARSE_MIRACAST 1
 #define RTW_SCAN_SPARSE_BG 0
 #define RTW_SCAN_SPARSE_ROAMING_ACTIVE 1

 #ifndef CONFIG_RTW_HIQ_FILTER
 	#define CONFIG_RTW_HIQ_FILTER 1
 #endif

 #ifndef CONFIG_RTW_ADAPTIVITY_EN
 	#define CONFIG_RTW_ADAPTIVITY_EN 0
 #endif

 #ifndef CONFIG_RTW_ADAPTIVITY_MODE
 	#define CONFIG_RTW_ADAPTIVITY_MODE 0
 #endif

 #ifndef CONFIG_RTW_ADAPTIVITY_DML
 	#define CONFIG_RTW_ADAPTIVITY_DML 0
 #endif

 #ifndef CONFIG_RTW_ADAPTIVITY_DC_BACKOFF
 	#define CONFIG_RTW_ADAPTIVITY_DC_BACKOFF 2
 #endif

 #ifndef CONFIG_RTW_ADAPTIVITY_TH_L2H_INI
 	#define CONFIG_RTW_ADAPTIVITY_TH_L2H_INI 0
 #endif

 #ifndef CONFIG_RTW_ADAPTIVITY_TH_EDCCA_HL_DIFF
 	#define CONFIG_RTW_ADAPTIVITY_TH_EDCCA_HL_DIFF 0
 #endif

 #ifndef CONFIG_RTW_EXCL_CHS
 	#define CONFIG_RTW_EXCL_CHS {0}
 #endif

 #ifndef CONFIG_RTW_DFS_REGION_DOMAIN
 	#define CONFIG_RTW_DFS_REGION_DOMAIN 0
 #endif

 #ifndef CONFIG_TXPWR_BY_RATE_EN
 #define CONFIG_TXPWR_BY_RATE_EN 2 /* by efuse */
 #endif
 #ifndef CONFIG_TXPWR_LIMIT_EN
 #define CONFIG_TXPWR_LIMIT_EN 2 /* by efuse */
 #endif

 #ifndef CONFIG_RTW_CHPLAN
 #define CONFIG_RTW_CHPLAN 0xFF /* RTW_CHPLAN_UNSPECIFIED */
 #endif

 /* compatible with old fashion configuration */
 #if defined(CONFIG_CALIBRATE_TX_POWER_BY_REGULATORY)
 	#undef CONFIG_TXPWR_BY_RATE_EN
 	#undef CONFIG_TXPWR_LIMIT_EN
 	#define CONFIG_TXPWR_BY_RATE_EN 1
 	#define CONFIG_TXPWR_LIMIT_EN 1
 #elif defined(CONFIG_CALIBRATE_TX_POWER_TO_MAX)
 	#undef CONFIG_TXPWR_BY_RATE_EN
 	#undef CONFIG_TXPWR_LIMIT_EN
 	#define CONFIG_TXPWR_BY_RATE_EN 1
 	#define CONFIG_TXPWR_LIMIT_EN 0
 #endif

 #ifndef RTW_DEF_MODULE_REGULATORY_CERT
 	#define RTW_DEF_MODULE_REGULATORY_CERT 0
 #endif

 #if RTW_DEF_MODULE_REGULATORY_CERT
 	/* force enable TX power by rate and TX power limit */
 	#undef CONFIG_TXPWR_BY_RATE_EN
 	#undef CONFIG_TXPWR_LIMIT_EN
 	#define CONFIG_TXPWR_BY_RATE_EN 1
 	#define CONFIG_TXPWR_LIMIT_EN 1
 #endif

 #if !defined(CONFIG_TXPWR_LIMIT) && CONFIG_TXPWR_LIMIT_EN
 	#define CONFIG_TXPWR_LIMIT
 #endif

 #ifdef CONFIG_RTW_IPCAM_APPLICATION
 	#undef CONFIG_TXPWR_BY_RATE_EN
 	#define CONFIG_TXPWR_BY_RATE_EN 1
 	#define CONFIG_RTW_CUSTOMIZE_BEEDCA		0x0000431C
 	#define CONFIG_RTW_CUSTOMIZE_BWMODE		0x00
 	#define CONFIG_RTW_CUSTOMIZE_RLSTA		0x7
 #endif


 #ifndef CONFIG_RTW_RX_AMPDU_SZ_LIMIT_1SS
 	#define CONFIG_RTW_RX_AMPDU_SZ_LIMIT_1SS {0xFF, 0xFF, 0xFF, 0xFF}
 #endif
 #ifndef CONFIG_RTW_RX_AMPDU_SZ_LIMIT_2SS
 	#define CONFIG_RTW_RX_AMPDU_SZ_LIMIT_2SS {0xFF, 0xFF, 0xFF, 0xFF}
 #endif
 #ifndef CONFIG_RTW_RX_AMPDU_SZ_LIMIT_3SS
 	#define CONFIG_RTW_RX_AMPDU_SZ_LIMIT_3SS {0xFF, 0xFF, 0xFF, 0xFF}
 #endif
 #ifndef CONFIG_RTW_RX_AMPDU_SZ_LIMIT_4SS
 	#define CONFIG_RTW_RX_AMPDU_SZ_LIMIT_4SS {0xFF, 0xFF, 0xFF, 0xFF}
 #endif

 #ifndef CONFIG_RTW_TARGET_TX_PWR_2G_A
 	#define CONFIG_RTW_TARGET_TX_PWR_2G_A {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}
 #endif

 #ifndef CONFIG_RTW_TARGET_TX_PWR_2G_B
 	#define CONFIG_RTW_TARGET_TX_PWR_2G_B {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}
 #endif

 #ifndef CONFIG_RTW_TARGET_TX_PWR_2G_C
 	#define CONFIG_RTW_TARGET_TX_PWR_2G_C {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}
 #endif

 #ifndef CONFIG_RTW_TARGET_TX_PWR_2G_D
 	#define CONFIG_RTW_TARGET_TX_PWR_2G_D {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}
 #endif

 #ifndef CONFIG_RTW_TARGET_TX_PWR_5G_A
 	#define CONFIG_RTW_TARGET_TX_PWR_5G_A {-1, -1, -1, -1, -1, -1, -1, -1, -1}
 #endif

 #ifndef CONFIG_RTW_TARGET_TX_PWR_5G_B
 	#define CONFIG_RTW_TARGET_TX_PWR_5G_B {-1, -1, -1, -1, -1, -1, -1, -1, -1}
 #endif

 #ifndef CONFIG_RTW_TARGET_TX_PWR_5G_C
 	#define CONFIG_RTW_TARGET_TX_PWR_5G_C {-1, -1, -1, -1, -1, -1, -1, -1, -1}
 #endif

 #ifndef CONFIG_RTW_TARGET_TX_PWR_5G_D
 	#define CONFIG_RTW_TARGET_TX_PWR_5G_D {-1, -1, -1, -1, -1, -1, -1, -1, -1}
 #endif

 #ifndef CONFIG_RTW_AMPLIFIER_TYPE_2G
 	#define CONFIG_RTW_AMPLIFIER_TYPE_2G 0
 #endif

 #ifndef CONFIG_RTW_AMPLIFIER_TYPE_5G
 	#define CONFIG_RTW_AMPLIFIER_TYPE_5G 0
 #endif

 #ifndef CONFIG_RTW_RFE_TYPE
 	#define CONFIG_RTW_RFE_TYPE 64
 #endif

 #ifndef CONFIG_RTW_GLNA_TYPE
 	#define CONFIG_RTW_GLNA_TYPE 0
 #endif

 #ifndef CONFIG_RTW_PLL_REF_CLK_SEL
 	#define CONFIG_RTW_PLL_REF_CLK_SEL 0x0F
 #endif

 #ifndef CONFIG_IFACE_NUMBER
 	#ifdef CONFIG_CONCURRENT_MODE
 		#define CONFIG_IFACE_NUMBER	2
 	#else
 		#define CONFIG_IFACE_NUMBER	1
 	#endif
 #endif

 #ifndef CONFIG_CONCURRENT_MODE
 	#if (CONFIG_IFACE_NUMBER > 1)
 		#error "CONFIG_IFACE_NUMBER over 1,but CONFIG_CONCURRENT_MODE not defined"
 	#endif
 #endif

 #if (CONFIG_IFACE_NUMBER == 0)
 	#error "CONFIG_IFACE_NUMBER cound not equel to 0 !!"
 #endif

 #if (CONFIG_IFACE_NUMBER > 3)
 	#error "Not support over 3 interfaces yet !!"
 #endif

 #if (CONFIG_IFACE_NUMBER > 8)	/*IFACE_ID_MAX*/
 	#error "HW count not support over 8 interfaces !!"
 #endif

 #if (CONFIG_IFACE_NUMBER > 2)
 	#define CONFIG_MI_WITH_MBSSID_CAM

 	#ifdef CONFIG_MI_WITH_MBSSID_CAM
 		#define CONFIG_MBSSID_CAM
 		#if defined(CONFIG_RUNTIME_PORT_SWITCH)
 			#undef CONFIG_RUNTIME_PORT_SWITCH
 		#endif
 	#endif

 	#ifdef CONFIG_AP_MODE
 		#define CONFIG_SWTIMER_BASED_TXBCN
 		/*#define CONFIG_FW_BASED_BCN*/
 	#endif
 #endif

 #define MACID_NUM_SW_LIMIT 32
 #define SEC_CAM_ENT_NUM_SW_LIMIT 32

 #if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A) || defined(CONFIG_RTL8814A)
 	#define CONFIG_IEEE80211_BAND_5GHZ
 #endif

 #if defined(CONFIG_WOWLAN) && (defined(CONFIG_RTL8822B) || defined(CONFIG_RTL8821C))
 	#define CONFIG_WOW_PATTERN_HW_CAM
 #endif

 /*
 	Mark CONFIG_DEAUTH_BEFORE_CONNECT by Arvin 2015/07/20
 	If the failure of Wi-Fi connection is due to some irregular disconnection behavior (like unplug dongle,
 	power down etc.) in last time, we can unmark this flag to avoid some unpredictable response from AP.
 */
 /*#define CONFIG_DEAUTH_BEFORE_CONNECT */

 /*#define CONFIG_WEXT_DONT_JOIN_BYSSID	*/
 /* #include <rtl871x_byteorder.h> */


 /*#define CONFIG_DOSCAN_IN_BUSYTRAFFIC	*/

 /*Don't release SDIO irq in suspend/resume procedure*/
 #define CONFIG_RTW_SDIO_KEEP_IRQ	0

 /*
  * Add by Lucas@2016/02/15
  * For RX Aggregation
  */
 #if defined(CONFIG_SDIO_HCI) || defined(CONFIG_USB_RX_AGGREGATION)
 	#define RTW_RX_AGGREGATION
 #endif /* CONFIG_SDIO_HCI || CONFIG_USB_RX_AGGREGATION */

 #ifdef CONFIG_RTW_HOSTAPD_ACS
 	#if defined(CONFIG_RTL8812A) || defined(CONFIG_RTL8821A) || defined(CONFIG_RTL8814A)
 		#ifndef CONFIG_FIND_BEST_CHANNEL
 			#define CONFIG_FIND_BEST_CHANNEL
 		#endif
 	#else
 		#ifdef CONFIG_FIND_BEST_CHANNEL
 			#undef CONFIG_FIND_BEST_CHANNEL
 		#endif
 		#ifndef CONFIG_RTW_ACS
 			#define CONFIG_RTW_ACS
 		#endif
 		#ifndef CONFIG_BACKGROUND_NOISE_MONITOR
 			#define CONFIG_BACKGROUND_NOISE_MONITOR
 		#endif
 	#endif
 #endif

 #ifdef DBG_CONFIG_ERROR_RESET
 #ifndef CONFIG_IPS
 #define CONFIG_IPS
 #endif
 #endif
 #endif /* __DRV_CONF_H__ */
	/******************************************************************************
	*
	* Copyright(c) 2007 - 2017 Realtek Corporation.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of version 2 of the GNU General Public License as
	* published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	*****************************************************************************/
	#ifndef __DRV_CONF_H__
	#define __DRV_CONF_H__
	#include "autoconf.h"
	#include "hal_ic_cfg.h"

	#if defined(PLATFORM_LINUX) && defined (PLATFORM_WINDOWS)

	#error "Shall be Linux or Windows, but not both!\n"

	#endif

	#ifdef CONFIG_RTW_REPEATER_SON
	#ifndef CONFIG_AP
	#define CONFIG_AP
	#endif
	#ifndef CONFIG_CONCURRENT_MODE
	#define CONFIG_CONCURRENT_MODE
	#endif
	#ifndef CONFIG_BR_EXT
	#define CONFIG_BR_EXT
	#endif
	#ifndef CONFIG_RTW_REPEATER_SON_ID
	#define CONFIG_RTW_REPEATER_SON_ID 0x02040608
	#endif
	//#define CONFIG_RTW_REPEATER_SON_ROOT
	#ifndef CONFIG_RTW_REPEATER_SON_ROOT
	#define CONFIG_LAYER2_ROAMING_ACTIVE
	#endif
	#undef CONFIG_POWER_SAVING
	#endif

	#if defined(CONFIG_MCC_MODE) && (!defined(CONFIG_CONCURRENT_MODE))

	#error "Enable CONCURRENT_MODE before enable MCC MODE\n"

	#endif

	#if defined(CONFIG_MCC_MODE) && defined(CONFIG_BT_COEXIST)

	#error "Disable BT COEXIST before enable MCC MODE\n"

	#endif

	#if defined(CONFIG_MCC_MODE) && defined(CONFIG_TDLS)

	#error "Disable TDLS before enable MCC MODE\n"

	#endif

	#if defined(CONFIG_RTW_80211R) && !defined(CONFIG_LAYER2_ROAMING)

	#error "Enable CONFIG_LAYER2_ROAMING before enable CONFIG_RTW_80211R\n"

	#endif

	/* Older Android kernel doesn't has CONFIG_ANDROID defined,
	* add this to force CONFIG_ANDROID defined */
	#ifdef CONFIG_PLATFORM_ANDROID
	#ifndef CONFIG_ANDROID
	#define CONFIG_ANDROID
	#endif
	#endif

	#ifdef CONFIG_ANDROID
	/* Some Android build will restart the UI while non-printable ascii is passed
	* between java and c/c++ layer (JNI). We force CONFIG_VALIDATE_SSID
	* for Android here. If you are sure there is no risk on your system about this,
	* mask this macro define to support non-printable ascii ssid.
	* #define CONFIG_VALIDATE_SSID */

	/* Android expect dbm as the rx signal strength unit */
	#define CONFIG_SIGNAL_DISPLAY_DBM
	#endif

	/*
	#if defined(CONFIG_HAS_EARLYSUSPEND) && defined(CONFIG_RESUME_IN_WORKQUEUE)
	#warning "You have CONFIG_HAS_EARLYSUSPEND enabled in your system, we disable CONFIG_RESUME_IN_WORKQUEUE automatically"
	#undef CONFIG_RESUME_IN_WORKQUEUE
	#endif

	#if defined(CONFIG_ANDROID_POWER) && defined(CONFIG_RESUME_IN_WORKQUEUE)
	#warning "You have CONFIG_ANDROID_POWER enabled in your system, we disable CONFIG_RESUME_IN_WORKQUEUE automatically"
	#undef CONFIG_RESUME_IN_WORKQUEUE
	#endif
	*/

	#ifdef CONFIG_RESUME_IN_WORKQUEUE /* this can be removed, because there is no case for this... */
	#if !defined(CONFIG_WAKELOCK) && !defined(CONFIG_ANDROID_POWER)
	#error "enable CONFIG_RESUME_IN_WORKQUEUE without CONFIG_WAKELOCK or CONFIG_ANDROID_POWER will suffer from the danger of wifi's unfunctionality..."
	#error "If you still want to enable CONFIG_RESUME_IN_WORKQUEUE in this case, mask this preprossor checking and GOOD LUCK..."
	#endif
	#endif

	/* About USB VENDOR REQ */
	#if defined(CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC) && !defined(CONFIG_USB_VENDOR_REQ_MUTEX)
	#warning "define CONFIG_USB_VENDOR_REQ_MUTEX for CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC automatically"
	#define CONFIG_USB_VENDOR_REQ_MUTEX
	#endif
	#if defined(CONFIG_VENDOR_REQ_RETRY) && !defined(CONFIG_USB_VENDOR_REQ_MUTEX)
	#warning "define CONFIG_USB_VENDOR_REQ_MUTEX for CONFIG_VENDOR_REQ_RETRY automatically"
	#define CONFIG_USB_VENDOR_REQ_MUTEX
	#endif

	#if !defined(CONFIG_AP_MODE) && defined(CONFIG_DFS_MASTER)
	#warning "undef CONFIG_DFS_MASTER because CONFIG_AP_MODE is not defined"
	#undef CONFIG_DFS_MASTER
	#endif

	#if !defined(CONFIG_SCAN_BACKOP) && defined(CONFIG_AP_MODE)
	#define CONFIG_SCAN_BACKOP
	#endif

	#define RTW_SCAN_SPARSE_MIRACAST 1
	#define RTW_SCAN_SPARSE_BG 0
	#define RTW_SCAN_SPARSE_ROAMING_ACTIVE 1

	#ifndef CONFIG_RTW_HIQ_FILTER
	#define CONFIG_RTW_HIQ_FILTER 1
	#endif

	#ifndef CONFIG_RTW_ADAPTIVITY_EN
	#define CONFIG_RTW_ADAPTIVITY_EN 0
	#endif

	#ifndef CONFIG_RTW_ADAPTIVITY_MODE
	#define CONFIG_RTW_ADAPTIVITY_MODE 0
	#endif

	#ifndef CONFIG_RTW_ADAPTIVITY_DML
	#define CONFIG_RTW_ADAPTIVITY_DML 0
	#endif

	#ifndef CONFIG_RTW_ADAPTIVITY_DC_BACKOFF
	#define CONFIG_RTW_ADAPTIVITY_DC_BACKOFF 2
	#endif

	#ifndef CONFIG_RTW_ADAPTIVITY_TH_L2H_INI
	#define CONFIG_RTW_ADAPTIVITY_TH_L2H_INI 0
	#endif

	#ifndef CONFIG_RTW_ADAPTIVITY_TH_EDCCA_HL_DIFF
	#define CONFIG_RTW_ADAPTIVITY_TH_EDCCA_HL_DIFF 0
	#endif

	#ifndef CONFIG_RTW_EXCL_CHS
	#define CONFIG_RTW_EXCL_CHS {0}
	#endif

	#ifndef CONFIG_RTW_DFS_REGION_DOMAIN
	#define CONFIG_RTW_DFS_REGION_DOMAIN 0
	#endif

	#ifndef CONFIG_TXPWR_BY_RATE_EN
	#define CONFIG_TXPWR_BY_RATE_EN 2 /* by efuse */
	#endif
	#ifndef CONFIG_TXPWR_LIMIT_EN
	#define CONFIG_TXPWR_LIMIT_EN 2 /* by efuse */
	#endif

	#ifndef CONFIG_RTW_CHPLAN
	#define CONFIG_RTW_CHPLAN 0xFF /* RTW_CHPLAN_UNSPECIFIED */
	#endif

	/* compatible with old fashion configuration */
	#if defined(CONFIG_CALIBRATE_TX_POWER_BY_REGULATORY)
	#undef CONFIG_TXPWR_BY_RATE_EN
	#undef CONFIG_TXPWR_LIMIT_EN
	#define CONFIG_TXPWR_BY_RATE_EN 1
	#define CONFIG_TXPWR_LIMIT_EN 1
	#elif defined(CONFIG_CALIBRATE_TX_POWER_TO_MAX)
	#undef CONFIG_TXPWR_BY_RATE_EN
	#undef CONFIG_TXPWR_LIMIT_EN
	#define CONFIG_TXPWR_BY_RATE_EN 1
	#define CONFIG_TXPWR_LIMIT_EN 0
	#endif

	#ifndef RTW_DEF_MODULE_REGULATORY_CERT
	#define RTW_DEF_MODULE_REGULATORY_CERT 0
	#endif

	#if RTW_DEF_MODULE_REGULATORY_CERT
	/* force enable TX power by rate and TX power limit */
	#undef CONFIG_TXPWR_BY_RATE_EN
	#undef CONFIG_TXPWR_LIMIT_EN
	#define CONFIG_TXPWR_BY_RATE_EN 1
	#define CONFIG_TXPWR_LIMIT_EN 1
	#endif

	#if !defined(CONFIG_TXPWR_LIMIT) && CONFIG_TXPWR_LIMIT_EN
	#define CONFIG_TXPWR_LIMIT
	#endif

	#ifdef CONFIG_RTW_IPCAM_APPLICATION
	#undef CONFIG_TXPWR_BY_RATE_EN
	#define CONFIG_TXPWR_BY_RATE_EN 1
	#define CONFIG_RTW_CUSTOMIZE_BEEDCA 0x0000431C
	#define CONFIG_RTW_CUSTOMIZE_BWMODE 0x00
	#define CONFIG_RTW_CUSTOMIZE_RLSTA 0x7
	#endif


	#ifndef CONFIG_RTW_RX_AMPDU_SZ_LIMIT_1SS
	#define CONFIG_RTW_RX_AMPDU_SZ_LIMIT_1SS {0xFF, 0xFF, 0xFF, 0xFF}
	#endif
	#ifndef CONFIG_RTW_RX_AMPDU_SZ_LIMIT_2SS
	#define CONFIG_RTW_RX_AMPDU_SZ_LIMIT_2SS {0xFF, 0xFF, 0xFF, 0xFF}
	#endif
	#ifndef CONFIG_RTW_RX_AMPDU_SZ_LIMIT_3SS
	#define CONFIG_RTW_RX_AMPDU_SZ_LIMIT_3SS {0xFF, 0xFF, 0xFF, 0xFF}
	#endif
	#ifndef CONFIG_RTW_RX_AMPDU_SZ_LIMIT_4SS
	#define CONFIG_RTW_RX_AMPDU_SZ_LIMIT_4SS {0xFF, 0xFF, 0xFF, 0xFF}
	#endif

	#ifndef CONFIG_RTW_TARGET_TX_PWR_2G_A
	#define CONFIG_RTW_TARGET_TX_PWR_2G_A {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}
	#endif

	#ifndef CONFIG_RTW_TARGET_TX_PWR_2G_B
	#define CONFIG_RTW_TARGET_TX_PWR_2G_B {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}
	#endif

	#ifndef CONFIG_RTW_TARGET_TX_PWR_2G_C
	#define CONFIG_RTW_TARGET_TX_PWR_2G_C {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}
	#endif

	#ifndef CONFIG_RTW_TARGET_TX_PWR_2G_D
	#define CONFIG_RTW_TARGET_TX_PWR_2G_D {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}
	#endif

	#ifndef CONFIG_RTW_TARGET_TX_PWR_5G_A
	#define CONFIG_RTW_TARGET_TX_PWR_5G_A {-1, -1, -1, -1, -1, -1, -1, -1, -1}
	#endif

	#ifndef CONFIG_RTW_TARGET_TX_PWR_5G_B
	#define CONFIG_RTW_TARGET_TX_PWR_5G_B {-1, -1, -1, -1, -1, -1, -1, -1, -1}
	#endif

	#ifndef CONFIG_RTW_TARGET_TX_PWR_5G_C
	#define CONFIG_RTW_TARGET_TX_PWR_5G_C {-1, -1, -1, -1, -1, -1, -1, -1, -1}
	#endif

	#ifndef CONFIG_RTW_TARGET_TX_PWR_5G_D
	#define CONFIG_RTW_TARGET_TX_PWR_5G_D {-1, -1, -1, -1, -1, -1, -1, -1, -1}
	#endif

	#ifndef CONFIG_RTW_AMPLIFIER_TYPE_2G
	#define CONFIG_RTW_AMPLIFIER_TYPE_2G 0
	#endif

	#ifndef CONFIG_RTW_AMPLIFIER_TYPE_5G
	#define CONFIG_RTW_AMPLIFIER_TYPE_5G 0
	#endif

	#ifndef CONFIG_RTW_RFE_TYPE
	#define CONFIG_RTW_RFE_TYPE 64
	#endif

	#ifndef CONFIG_RTW_GLNA_TYPE
	#define CONFIG_RTW_GLNA_TYPE 0
	#endif

	#ifndef CONFIG_RTW_PLL_REF_CLK_SEL
	#define CONFIG_RTW_PLL_REF_CLK_SEL 0x0F
	#endif

	#ifndef CONFIG_IFACE_NUMBER
	#ifdef CONFIG_CONCURRENT_MODE
	#define CONFIG_IFACE_NUMBER 2
	#else
	#define CONFIG_IFACE_NUMBER 1
	#endif
	#endif

	#ifndef CONFIG_CONCURRENT_MODE
	#if (CONFIG_IFACE_NUMBER > 1)
	#error "CONFIG_IFACE_NUMBER over 1,but CONFIG_CONCURRENT_MODE not defined"
	#endif
	#endif

	#if (CONFIG_IFACE_NUMBER == 0)
	#error "CONFIG_IFACE_NUMBER cound not equel to 0 !!"
	#endif

	#if (CONFIG_IFACE_NUMBER > 3)
	#error "Not support over 3 interfaces yet !!"
	#endif

	#if (CONFIG_IFACE_NUMBER > 8) /IFACE_ID_MAX/
	#error "HW count not support over 8 interfaces !!"
	#endif

	#if (CONFIG_IFACE_NUMBER > 2)
	#define CONFIG_MI_WITH_MBSSID_CAM

	#ifdef CONFIG_MI_WITH_MBSSID_CAM
	#define CONFIG_MBSSID_CAM
	#if defined(CONFIG_RUNTIME_PORT_SWITCH)
	#undef CONFIG_RUNTIME_PORT_SWITCH
	#endif
	#endif

	#ifdef CONFIG_AP_MODE
	#define CONFIG_SWTIMER_BASED_TXBCN
	/#define CONFIG_FW_BASED_BCN/
	#endif
	#endif

	#define MACID_NUM_SW_LIMIT 32
	#define SEC_CAM_ENT_NUM_SW_LIMIT 32

	#if defined(CONFIG_RTL8812A) \|\| defined(CONFIG_RTL8821A) \|\| defined(CONFIG_RTL8814A)
	#define CONFIG_IEEE80211_BAND_5GHZ
	#endif

	#if defined(CONFIG_WOWLAN) && (defined(CONFIG_RTL8822B) \|\| defined(CONFIG_RTL8821C))
	#define CONFIG_WOW_PATTERN_HW_CAM
	#endif

	/*
	Mark CONFIG_DEAUTH_BEFORE_CONNECT by Arvin 2015/07/20
	If the failure of Wi-Fi connection is due to some irregular disconnection behavior (like unplug dongle,
	power down etc.) in last time, we can unmark this flag to avoid some unpredictable response from AP.
	*/
	/#define CONFIG_DEAUTH_BEFORE_CONNECT /

	/#define CONFIG_WEXT_DONT_JOIN_BYSSID /
	/* #include <rtl871x_byteorder.h> */


	/#define CONFIG_DOSCAN_IN_BUSYTRAFFIC /

	/Don't release SDIO irq in suspend/resume procedure/
	#define CONFIG_RTW_SDIO_KEEP_IRQ 0

	/*
	* Add by Lucas@2016/02/15
	* For RX Aggregation
	*/
	#if defined(CONFIG_SDIO_HCI) \|\| defined(CONFIG_USB_RX_AGGREGATION)
	#define RTW_RX_AGGREGATION
	#endif /* CONFIG_SDIO_HCI \|\| CONFIG_USB_RX_AGGREGATION */

	#ifdef CONFIG_RTW_HOSTAPD_ACS
	#if defined(CONFIG_RTL8812A) \|\| defined(CONFIG_RTL8821A) \|\| defined(CONFIG_RTL8814A)
	#ifndef CONFIG_FIND_BEST_CHANNEL
	#define CONFIG_FIND_BEST_CHANNEL
	#endif
	#else
	#ifdef CONFIG_FIND_BEST_CHANNEL
	#undef CONFIG_FIND_BEST_CHANNEL
	#endif
	#ifndef CONFIG_RTW_ACS
	#define CONFIG_RTW_ACS
	#endif
	#ifndef CONFIG_BACKGROUND_NOISE_MONITOR
	#define CONFIG_BACKGROUND_NOISE_MONITOR
	#endif
	#endif
	#endif

	#ifdef DBG_CONFIG_ERROR_RESET
	#ifndef CONFIG_IPS
	#define CONFIG_IPS
	#endif
	#endif
	#endif /* __DRV_CONF_H__ */