| /* |
| * Common header file for all error codes. |
| * |
| * Copyright (C) 2020, Broadcom. |
| * |
| * Unless you and Broadcom execute a separate written software license |
| * agreement governing use of this software, this software is licensed to you |
| * under the terms of the GNU General Public License version 2 (the "GPL"), |
| * available at http://www.broadcom.com/licenses/GPLv2.php, with the |
| * following added to such license: |
| * |
| * As a special exception, the copyright holders of this software give you |
| * permission to link this software with independent modules, and to copy and |
| * distribute the resulting executable under terms of your choice, provided that |
| * you also meet, for each linked independent module, the terms and conditions of |
| * the license of that module. An independent module is a module which is not |
| * derived from this software. The special exception does not apply to any |
| * modifications of the software. |
| * |
| * |
| * <<Broadcom-WL-IPTag/Dual:>> |
| * |
| * |
| * |
| */ |
| |
| #ifndef _bcmerror_h_ |
| #define _bcmerror_h_ |
| |
| #include <typedefs.h> |
| |
| /* Use error codes from this file only if BCMUTILS_ERR_CODES is defined. */ |
| #ifdef BCMUTILS_ERR_CODES |
| |
| /* NOTE re: Module specific error codes. |
| * |
| * BCME_.. error codes are extended by various features - e.g. FTM, NAN, SAE etc. |
| * The current process is to allocate a range of 1024 negative 32 bit integers to |
| * each module that extends the error codes to indicate a module specific status. |
| * |
| * The next range to use is below. If that range is used for a new feature, please |
| * update the range to be used by the next feature. |
| * |
| * Next available (inclusive) range: [-8*1024 + 1, -7*1024] |
| * |
| * Common error codes use BCME_ prefix. Firmware (wl) components should use the |
| * convention to prefix the error code name with WL_<Component>_E_ (e.g. WL_NAN_E_?). |
| * Non-wl components, other than common error codes use BCM_<Componennt>_E_ |
| * prefix(e.g. BCM_FWSIGN_E_). |
| * |
| * End Note |
| */ |
| |
| typedef int bcmerror_t; |
| |
| /* |
| * error codes could be added but the defined ones shouldn't be changed/deleted |
| * these error codes are exposed to the user code |
| * when ever a new error code is added to this list |
| * please update errorstring table with the related error string and |
| * update osl files with os specific errorcode map |
| */ |
| |
| #define BCME_OK 0 /* Success */ |
| #define BCME_ERROR -1 /* Error generic */ |
| #define BCME_BADARG -2 /* Bad Argument */ |
| #define BCME_BADOPTION -3 /* Bad option */ |
| #define BCME_NOTUP -4 /* Not up */ |
| #define BCME_NOTDOWN -5 /* Not down */ |
| #define BCME_NOTAP -6 /* Not AP */ |
| #define BCME_NOTSTA -7 /* Not STA */ |
| #define BCME_BADKEYIDX -8 /* BAD Key Index */ |
| #define BCME_RADIOOFF -9 /* Radio Off */ |
| #define BCME_NOTBANDLOCKED -10 /* Not band locked */ |
| #define BCME_NOCLK -11 /* No Clock */ |
| #define BCME_BADRATESET -12 /* BAD Rate valueset */ |
| #define BCME_BADBAND -13 /* BAD Band */ |
| #define BCME_BUFTOOSHORT -14 /* Buffer too short */ |
| #define BCME_BUFTOOLONG -15 /* Buffer too long */ |
| #define BCME_BUSY -16 /* Busy */ |
| #define BCME_NOTASSOCIATED -17 /* Not Associated */ |
| #define BCME_BADSSIDLEN -18 /* Bad SSID len */ |
| #define BCME_OUTOFRANGECHAN -19 /* Out of Range Channel */ |
| #define BCME_BADCHAN -20 /* Bad Channel */ |
| #define BCME_BADADDR -21 /* Bad Address */ |
| #define BCME_NORESOURCE -22 /* Not Enough Resources */ |
| #define BCME_UNSUPPORTED -23 /* Unsupported */ |
| #define BCME_BADLEN -24 /* Bad length */ |
| #define BCME_NOTREADY -25 /* Not Ready */ |
| #define BCME_EPERM -26 /* Not Permitted */ |
| #define BCME_NOMEM -27 /* No Memory */ |
| #define BCME_ASSOCIATED -28 /* Associated */ |
| #define BCME_RANGE -29 /* Not In Range */ |
| #define BCME_NOTFOUND -30 /* Not Found */ |
| #define BCME_WME_NOT_ENABLED -31 /* WME Not Enabled */ |
| #define BCME_TSPEC_NOTFOUND -32 /* TSPEC Not Found */ |
| #define BCME_ACM_NOTSUPPORTED -33 /* ACM Not Supported */ |
| #define BCME_NOT_WME_ASSOCIATION -34 /* Not WME Association */ |
| #define BCME_SDIO_ERROR -35 /* SDIO Bus Error */ |
| #define BCME_DONGLE_DOWN -36 /* Dongle Not Accessible */ |
| #define BCME_VERSION -37 /* Incorrect version */ |
| #define BCME_TXFAIL -38 /* TX failure */ |
| #define BCME_RXFAIL -39 /* RX failure */ |
| #define BCME_NODEVICE -40 /* Device not present */ |
| #define BCME_NMODE_DISABLED -41 /* NMODE disabled */ |
| #define BCME_MSCH_DUP_REG -42 /* Duplicate slot registration */ |
| #define BCME_SCANREJECT -43 /* reject scan request */ |
| #define BCME_USAGE_ERROR -44 /* WLCMD usage error */ |
| #define BCME_IOCTL_ERROR -45 /* WLCMD ioctl error */ |
| #define BCME_SERIAL_PORT_ERR -46 /* RWL serial port error */ |
| #define BCME_DISABLED -47 /* Disabled in this build */ |
| #define BCME_DECERR -48 /* Decrypt error */ |
| #define BCME_ENCERR -49 /* Encrypt error */ |
| #define BCME_MICERR -50 /* Integrity/MIC error */ |
| #define BCME_REPLAY -51 /* Replay */ |
| #define BCME_IE_NOTFOUND -52 /* IE not found */ |
| #define BCME_DATA_NOTFOUND -53 /* Complete data not found in buffer */ |
| #define BCME_NOT_GC -54 /* expecting a group client */ |
| #define BCME_PRS_REQ_FAILED -55 /* GC presence req failed to sent */ |
| #define BCME_NO_P2P_SE -56 /* Could not find P2P-Subelement */ |
| #define BCME_NOA_PND -57 /* NoA pending, CB shuld be NULL */ |
| #define BCME_FRAG_Q_FAILED -58 /* queueing 80211 frag failedi */ |
| #define BCME_GET_AF_FAILED -59 /* Get p2p AF pkt failed */ |
| #define BCME_MSCH_NOTREADY -60 /* scheduler not ready */ |
| #define BCME_IOV_LAST_CMD -61 /* last batched iov sub-command */ |
| #define BCME_MINIPMU_CAL_FAIL -62 /* MiniPMU cal failed */ |
| #define BCME_RCAL_FAIL -63 /* Rcal failed */ |
| #define BCME_LPF_RCCAL_FAIL -64 /* RCCAL failed */ |
| #define BCME_DACBUF_RCCAL_FAIL -65 /* RCCAL failed */ |
| #define BCME_VCOCAL_FAIL -66 /* VCOCAL failed */ |
| #define BCME_BANDLOCKED -67 /* interface is restricted to a band */ |
| #define BCME_BAD_IE_DATA -68 /* Recieved ie with invalid/bad data */ |
| #define BCME_REG_FAILED -69 /* Generic registration failed */ |
| #define BCME_NOCHAN -70 /* Registration with 0 chans in list */ |
| #define BCME_PKTTOSS -71 /* Pkt tossed */ |
| #define BCME_DNGL_DEVRESET -72 /* dongle re-attach during DEVRESET */ |
| #define BCME_ROAM -73 /* Roam related failures */ |
| |
| #define BCME_LAST BCME_ROAM |
| |
| #define BCME_NOTENABLED BCME_DISABLED |
| |
| /* This error code is *internal* to the driver, and is not propogated to users. It should |
| * only be used by IOCTL patch handlers as an indication that it did not handle the IOCTL. |
| * (Since the error code is internal, an entry in 'BCMERRSTRINGTABLE' is not required, |
| * nor does it need to be part of any OSL driver-to-OS error code mapping). |
| */ |
| #define BCME_IOCTL_PATCH_UNSUPPORTED -9999 |
| #if (BCME_LAST <= BCME_IOCTL_PATCH_UNSUPPORTED) |
| #error "BCME_LAST <= BCME_IOCTL_PATCH_UNSUPPORTED" |
| #endif |
| |
| /* These are collection of BCME Error strings */ |
| #define BCMERRSTRINGTABLE { \ |
| "OK", \ |
| "Undefined error", \ |
| "Bad Argument", \ |
| "Bad Option", \ |
| "Not up", \ |
| "Not down", \ |
| "Not AP", \ |
| "Not STA", \ |
| "Bad Key Index", \ |
| "Radio Off", \ |
| "Not band locked", \ |
| "No clock", \ |
| "Bad Rate valueset", \ |
| "Bad Band", \ |
| "Buffer too short", \ |
| "Buffer too long", \ |
| "Busy", \ |
| "Not Associated", \ |
| "Bad SSID len", \ |
| "Out of Range Channel", \ |
| "Bad Channel", \ |
| "Bad Address", \ |
| "Not Enough Resources", \ |
| "Unsupported", \ |
| "Bad length", \ |
| "Not Ready", \ |
| "Not Permitted", \ |
| "No Memory", \ |
| "Associated", \ |
| "Not In Range", \ |
| "Not Found", \ |
| "WME Not Enabled", \ |
| "TSPEC Not Found", \ |
| "ACM Not Supported", \ |
| "Not WME Association", \ |
| "SDIO Bus Error", \ |
| "Dongle Not Accessible", \ |
| "Incorrect version", \ |
| "TX Failure", \ |
| "RX Failure", \ |
| "Device Not Present", \ |
| "NMODE Disabled", \ |
| "Host Offload in device", \ |
| "Scan Rejected", \ |
| "WLCMD usage error", \ |
| "WLCMD ioctl error", \ |
| "RWL serial port error", \ |
| "Disabled", \ |
| "Decrypt error", \ |
| "Encrypt error", \ |
| "MIC error", \ |
| "Replay", \ |
| "IE not found", \ |
| "Data not found", \ |
| "NOT GC", \ |
| "PRS REQ FAILED", \ |
| "NO P2P SubElement", \ |
| "NOA Pending", \ |
| "FRAG Q FAILED", \ |
| "GET ActionFrame failed", \ |
| "scheduler not ready", \ |
| "Last IOV batched sub-cmd", \ |
| "Mini PMU Cal failed", \ |
| "R-cal failed", \ |
| "LPF RC Cal failed", \ |
| "DAC buf RC Cal failed", \ |
| "VCO Cal failed", \ |
| "band locked", \ |
| "Recieved ie with invalid data", \ |
| "registration failed", \ |
| "Registration with zero channels", \ |
| "pkt toss", \ |
| "Dongle Devreset", \ |
| "Roam specific errors", \ |
| } |
| |
| /** status - TBD BCME_ vs proxd status - range reserved for BCME_ */ |
| enum { |
| WL_PROXD_E_LAST = -1056, |
| WL_PROXD_E_NOAVAIL = -1056, |
| WL_PROXD_E_EXT_SCHED = -1055, |
| WL_PROXD_E_NOT_BCM = -1054, |
| WL_PROXD_E_FRAME_TYPE = -1053, |
| WL_PROXD_E_VERNOSUPPORT = -1052, |
| WL_PROXD_E_SEC_NOKEY = -1051, |
| WL_PROXD_E_SEC_POLICY = -1050, |
| WL_PROXD_E_SCAN_INPROCESS = -1049, |
| WL_PROXD_E_BAD_PARTIAL_TSF = -1048, |
| WL_PROXD_E_SCANFAIL = -1047, |
| WL_PROXD_E_NOTSF = -1046, |
| WL_PROXD_E_POLICY = -1045, |
| WL_PROXD_E_INCOMPLETE = -1044, |
| WL_PROXD_E_OVERRIDDEN = -1043, |
| WL_PROXD_E_ASAP_FAILED = -1042, |
| WL_PROXD_E_NOTSTARTED = -1041, |
| WL_PROXD_E_INVALIDMEAS = -1040, |
| WL_PROXD_E_INCAPABLE = -1039, |
| WL_PROXD_E_MISMATCH = -1038, |
| WL_PROXD_E_DUP_SESSION = -1037, |
| WL_PROXD_E_REMOTE_FAIL = -1036, |
| WL_PROXD_E_REMOTE_INCAPABLE = -1035, |
| WL_PROXD_E_SCHED_FAIL = -1034, |
| WL_PROXD_E_PROTO = -1033, |
| WL_PROXD_E_EXPIRED = -1032, |
| WL_PROXD_E_TIMEOUT = -1031, |
| WL_PROXD_E_NOACK = -1030, |
| WL_PROXD_E_DEFERRED = -1029, |
| WL_PROXD_E_INVALID_SID = -1028, |
| WL_PROXD_E_REMOTE_CANCEL = -1027, |
| WL_PROXD_E_CANCELED = -1026, /**< local */ |
| WL_PROXD_E_INVALID_SESSION = -1025, |
| WL_PROXD_E_BAD_STATE = -1024, |
| WL_PROXD_E_START = -1024, |
| WL_PROXD_E_ERROR = -1, |
| WL_PROXD_E_OK = 0 |
| }; |
| typedef int32 wl_proxd_status_t; |
| |
| /** status - TBD BCME_ vs NAN status - range reserved for BCME_ */ |
| enum { |
| /* add new status here... */ |
| WL_NAN_E_NO_ACTION = -2136, /* status for no action */ |
| WL_NAN_E_INVALID_TOKEN = -2135, /* invalid token or mismatch */ |
| WL_NAN_E_INVALID_ATTR = -2134, /* generic invalid attr error */ |
| WL_NAN_E_INVALID_NDL_ATTR = -2133, /* invalid NDL attribute */ |
| WL_NAN_E_SCB_NORESOURCE = -2132, /* no more peer scb available */ |
| WL_NAN_E_PEER_NOTAVAIL = -2131, |
| WL_NAN_E_SCB_EXISTS = -2130, |
| WL_NAN_E_INVALID_PEER_NDI = -2129, |
| WL_NAN_E_INVALID_LOCAL_NDI = -2128, |
| WL_NAN_E_ALREADY_EXISTS = -2127, /* generic NAN error for duplication */ |
| WL_NAN_E_EXCEED_MAX_NUM_MAPS = -2126, |
| WL_NAN_E_INVALID_DEV_CHAN_SCHED = -2125, |
| WL_NAN_E_INVALID_PEER_BLOB_TYPE = -2124, |
| WL_NAN_E_INVALID_LCL_BLOB_TYPE = -2123, |
| WL_NAN_E_BCMC_PDPA = -2122, /* BCMC NAF PDPA */ |
| WL_NAN_E_TIMEOUT = -2121, |
| WL_NAN_E_HOST_CFG = -2120, |
| WL_NAN_E_NO_ACK = -2119, |
| WL_NAN_E_SECINST_FAIL = -2118, |
| WL_NAN_E_REJECT_NDL = -2117, /* generic NDL rejection error */ |
| WL_NAN_E_INVALID_NDP_ATTR = -2116, |
| WL_NAN_E_HOST_REJECTED = -2115, |
| WL_NAN_E_PCB_NORESOURCE = -2114, |
| WL_NAN_E_NDC_EXISTS = -2113, |
| WL_NAN_E_NO_NDC_ENTRY_AVAIL = -2112, |
| WL_NAN_E_INVALID_NDC_ENTRY = -2111, |
| WL_NAN_E_SD_TX_LIST_FULL = -2110, |
| WL_NAN_E_SVC_SUB_LIST_FULL = -2109, |
| WL_NAN_E_SVC_PUB_LIST_FULL = -2108, |
| WL_NAN_E_SDF_MAX_LEN_EXCEEDED = -2107, |
| WL_NAN_E_ZERO_CRB = -2106, /* no CRB between local and peer */ |
| WL_NAN_E_PEER_NDC_NOT_SELECTED = -2105, /* peer ndc not selected */ |
| WL_NAN_E_DAM_CHAN_CONFLICT = -2104, /* dam schedule channel conflict */ |
| WL_NAN_E_DAM_SCHED_PERIOD = -2103, /* dam schedule period mismatch */ |
| WL_NAN_E_LCL_NDC_NOT_SELECTED = -2102, /* local selected ndc not configured */ |
| WL_NAN_E_NDL_QOS_INVALID_NA = -2101, /* na doesn't comply with ndl qos */ |
| WL_NAN_E_CLEAR_NAF_WITH_SA_AS_RNDI = -2100, /* rx clear naf with peer rndi */ |
| WL_NAN_E_SEC_CLEAR_PKT = -2099, /* rx clear pkt from a peer with sec_sa */ |
| WL_NAN_E_PROT_NON_PDPA_NAF = -2098, /* rx protected non PDPA frame */ |
| WL_NAN_E_DAM_DOUBLE_REMOVE = -2097, /* remove peer schedule already removed */ |
| WL_NAN_E_DAM_DOUBLE_MERGE = -2096, /* merge peer schedule already merged */ |
| WL_NAN_E_DAM_REJECT_INVALID = -2095, /* reject for invalid schedule */ |
| WL_NAN_E_DAM_REJECT_RANGE = -2094, |
| WL_NAN_E_DAM_REJECT_QOS = -2093, |
| WL_NAN_E_DAM_REJECT_NDC = -2092, |
| WL_NAN_E_DAM_REJECT_PEER_IMMUT = -2091, |
| WL_NAN_E_DAM_REJECT_LCL_IMMUT = -2090, |
| WL_NAN_E_DAM_EXCEED_NUM_SCHED = -2089, |
| WL_NAN_E_DAM_INVALID_SCHED_MAP = -2088, /* invalid schedule map list */ |
| WL_NAN_E_DAM_INVALID_LCL_SCHED = -2087, |
| WL_NAN_E_INVALID_MAP_ID = -2086, |
| WL_NAN_E_CHAN_OVERLAP_ACROSS_MAP = -2085, |
| WL_NAN_E_INVALID_CHAN_LIST = -2084, |
| WL_NAN_E_INVALID_RANGE_TBMP = -2083, |
| WL_NAN_E_INVALID_IMMUT_SCHED = -2082, |
| WL_NAN_E_INVALID_NDC_ATTR = -2081, |
| WL_NAN_E_INVALID_TIME_BITMAP = -2080, |
| WL_NAN_E_INVALID_NA_ATTR = -2079, |
| WL_NAN_E_NO_NA_ATTR_IN_AVAIL_MAP = -2078, /* no na attr saved in avail map */ |
| WL_NAN_E_INVALID_MAP_IDX = -2077, |
| WL_NAN_E_SEC_SA_NOTFOUND = -2076, |
| WL_NAN_E_BSSCFG_NOTFOUND = -2075, |
| WL_NAN_E_SCB_NOTFOUND = -2074, |
| WL_NAN_E_NCS_SK_KDESC_TYPE = -2073, |
| WL_NAN_E_NCS_SK_KEY_DESC_VER = -2072, /* key descr ver */ |
| WL_NAN_E_NCS_SK_KEY_TYPE = -2071, /* key descr type */ |
| WL_NAN_E_NCS_SK_KEYINFO_FAIL = -2070, /* key info (generic) */ |
| WL_NAN_E_NCS_SK_KEY_LEN = -2069, /* key len */ |
| WL_NAN_E_NCS_SK_KDESC_NOT_FOUND = -2068, /* key desc not found */ |
| WL_NAN_E_NCS_SK_INVALID_PARAMS = -2067, /* invalid args */ |
| WL_NAN_E_NCS_SK_KDESC_INVALID = -2066, /* key descr is not valid */ |
| WL_NAN_E_NCS_SK_NONCE_MISMATCH = -2065, |
| WL_NAN_E_NCS_SK_KDATA_SAVE_FAIL = -2064, /* not able to save key data */ |
| WL_NAN_E_NCS_SK_AUTH_TOKEN_CALC_FAIL = -2063, |
| WL_NAN_E_NCS_SK_PTK_CALC_FAIL = -2062, |
| WL_NAN_E_INVALID_STARTOFFSET = -2061, |
| WL_NAN_E_BAD_NA_ENTRY_TYPE = -2060, |
| WL_NAN_E_INVALID_CHANBMP = -2059, |
| WL_NAN_E_INVALID_OP_CLASS = -2058, |
| WL_NAN_E_NO_IES = -2057, |
| WL_NAN_E_NO_PEER_ENTRY_AVAIL = -2056, |
| WL_NAN_E_INVALID_PEER = -2055, |
| WL_NAN_E_PEER_EXISTS = -2054, |
| WL_NAN_E_PEER_NOTFOUND = -2053, |
| WL_NAN_E_NO_MEM = -2052, |
| WL_NAN_E_INVALID_OPTION = -2051, |
| WL_NAN_E_INVALID_BAND = -2050, |
| WL_NAN_E_INVALID_MAC = -2049, |
| WL_NAN_E_BAD_INSTANCE = -2048, |
| /* NAN status code reserved from -2048 to -3071 */ |
| /* Do NOT add new status below -2048 */ |
| WL_NAN_E_ERROR = -1, |
| WL_NAN_E_OK = 0 |
| }; |
| |
| /* SAE (Simultaneous Authentication of Equals) status codes. |
| * SAE status codes are reserved from -3072 to -4095 (1K) |
| */ |
| enum { |
| WL_SAE_E_AUTH_FAILURE = -3072, |
| /* Discard silently */ |
| WL_SAE_E_AUTH_DISCARD = -3073, |
| /* Authentication in progress */ |
| WL_SAE_E_AUTH_CONTINUE = -3074, |
| /* Invalid scalar/elt */ |
| WL_SAE_E_AUTH_COMMIT_INVALID = -3075, |
| /* Invalid confirm token */ |
| WL_SAE_E_AUTH_CONFIRM_INVALID = -3076, |
| /* Peer scalar validation failure */ |
| WL_SAE_E_CRYPTO_SCALAR_VALIDATION = -3077, |
| /* Peer element prime validation failure */ |
| WL_SAE_E_CRYPTO_ELE_PRIME_VALIDATION = -3078, |
| /* Peer element is not on the curve */ |
| WL_SAE_E_CRYPTO_ELE_NOT_ON_CURVE = -3079, |
| /* Generic EC error (eliptic curve related) */ |
| WL_SAE_E_CRYPTO_EC_ERROR = -3080, |
| /* Both local and peer mac addrs are same */ |
| WL_SAE_E_CRYPTO_EQUAL_MACADDRS = -3081, |
| /* Loop exceeded in deriving the scalar */ |
| WL_SAE_E_CRYPTO_SCALAR_ITER_EXCEEDED = -3082, |
| /* ECC group is unsupported */ |
| WL_SAE_E_CRYPTO_UNSUPPORTED_GROUP = -3083, |
| /* Exceeded the hunting-and-pecking counter */ |
| WL_SAE_E_CRYPTO_PWE_COUNTER_EXCEEDED = -3084, |
| /* SAE crypto component is not initialized */ |
| WL_SAE_E_CRYPTO_NOT_INITED = -3085, |
| /* bn_get has failed */ |
| WL_SAE_E_CRYPTO_BN_GET_ERROR = -3086, |
| /* bn_set has failed */ |
| WL_SAE_E_CRYPTO_BN_SET_ERROR = -3087, |
| /* PMK is not computed yet */ |
| WL_SAE_E_CRYPTO_PMK_UNAVAILABLE = -3088, |
| /* Peer confirm did not match */ |
| WL_SAE_E_CRYPTO_CONFIRM_MISMATCH = -3089, |
| /* Element K is at infinity no the curve */ |
| WL_SAE_E_CRYPTO_KEY_AT_INFINITY = -3090, |
| /* SAE Crypto private data magic number mismatch */ |
| WL_SAE_E_CRYPTO_PRIV_MAGIC_MISMATCH = -3091, |
| /* Max retry exhausted */ |
| WL_SAE_E_MAX_RETRY_LIMIT_REACHED = -3092, |
| /* peer sent password ID mismatch to local */ |
| WL_SAE_E_AUTH_PEER_PWDID_MISMATCH = -3093, |
| /* user not configured password */ |
| WL_SAE_E_AUTH_PASSWORD_NOT_CONFIGURED = -3094, |
| /* user not configured password ID */ |
| WL_SAE_E_AUTH_PWDID_NOT_CONFIGURED = -3095, |
| /* Anti-clogging token mismatch */ |
| WL_SAE_E_AUTH_ANTI_CLOG_MISMATCH = -3096, |
| /* SAE PWE method mismatch */ |
| WL_SAE_E_AUTH_PWE_MISMATCH = -3097 |
| }; |
| |
| /* |
| * Firmware signing error code range: -4096...-5119 |
| */ |
| enum { |
| /* okay */ |
| BCM_FWSIGN_E_OK = 0, |
| |
| /* Operation is in progress */ |
| BCM_FWSIGN_E_INPROGRESS = -4096, |
| |
| /* version mismatch */ |
| BCM_FWSIGN_E_VERSION = -4097, |
| |
| /* key not found */ |
| BCM_FWSIGN_E_KEY_NOT_FOUND = -4098, |
| |
| /* key found, but is not valid (revoked) */ |
| BCM_FWSIGN_E_KEY_NOT_VALID = -4099, |
| |
| /* Cipher suite id mismatch for the key */ |
| BCM_FWSIGN_E_CS_ID_MISMATCH = -4100, |
| |
| /* Signature does not match */ |
| BCM_FWSIGN_E_SIGNATURE = -4101, |
| |
| /* Continue */ |
| BCM_FWSIGN_E_CONTINUE = -4102, |
| |
| /* Heap is too small */ |
| BCM_FWSIGN_E_HEAP_TOO_SMALL = -4103, |
| |
| /* Allocation of bn ctx failed */ |
| BCM_FWSIGN_E_BN_CTX_ALLOC_FAILED = -4104, |
| |
| /* possible bug */ |
| BCM_FWSIGN_E_BUGCHECK = -4105, |
| |
| /* chosen key is invalid */ |
| BCM_FWSIGN_E_INVALID_KEY = -4106, |
| |
| /* signature is invalid */ |
| BCM_FWSIGN_E_INVALID_SIGNATURE = -4107, |
| |
| /* signature tlv missing */ |
| BCM_FWSIGN_E_NO_CSID_SIG = -4108, |
| |
| /* chosen key is invalid */ |
| BCM_FWSIGN_E_REVOKED_KEY = -4109, |
| |
| /* signature has no matching valid key in ROM */ |
| BCM_FWSIGN_E_NO_OTP_FOR_ROM_KEY = -4110, |
| |
| /* Compression not supported */ |
| BCM_FWSIGN_E_COMPNOTSUP = -4111, |
| |
| /* OTP read error */ |
| BCM_FWSIGN_E_OTP_READ = -4112, |
| |
| /* last error */ |
| BCM_FWSIGN_E_LAST = -5119 |
| }; |
| typedef int32 bcm_fwsign_status_t; |
| |
| /* PMK manager block. Event codes from -5120 to -6143 */ |
| /* PSK hashing event codes */ |
| enum { |
| WL_PMK_E_PSK_HASH_FAILED = -5120, |
| WL_PMK_E_PSK_HASH_DONE = -5121, |
| WL_PMK_E_PSK_HASH_RUNNING = -5122, |
| WL_PMK_E_PSK_INVALID = -5123, |
| WL_PMK_E_PSK_NOMEM = -5124 |
| }; |
| |
| /* |
| * SOE (Security Offload Engine) status codes. |
| * SOE status codes are reserved from -6144 to -7167 (1K) |
| */ |
| enum { |
| /* Invalid operational context */ |
| WL_SOE_E_BAD_OP_CONTEXT = -6144, |
| |
| /* Invalid operational type */ |
| WL_SOE_E_BAD_OP_TYPE = -6145, |
| |
| /* Failure to get NAF3 encoded scalar */ |
| WL_SOE_E_BN_NAF3_GET_ERROR = -6146, |
| |
| /* Failure to get NAF3 params */ |
| WL_SOE_E_NAF3_PARAMS_GET_ERROR = -6147 |
| }; |
| |
| #endif /* BCMUTILS_ERR_CODES */ |
| |
| #endif /* _bcmerror_h_ */ |