| # Audio jack configuration |
| dev=/sys/devices/platform/msm_ssbi.0/pm8058-core/simple_remote_pf/simple_remote |
| echo 0,201 > $dev/accessory_min_vals |
| echo 200,1599 > $dev/accessory_max_vals |
| echo 0,100,280,500 > $dev/button_min_vals |
| echo 99,199,399,699 > $dev/button_max_vals |
| echo 512 > $dev/btn_trig_period_freq # Button Period Freq(Hz) |
| echo 16 > $dev/btn_trig_period_time # Button Period Time(Cycle) |
| echo 512 > $dev/btn_trig_hyst_freq # Button Hysteresis Freq(Hz) |
| echo 16 > $dev/btn_trig_hyst_time # Button Hysteresis Time(Cycle) |
| echo 400 > $dev/btn_trig_level |
| |
| # Proximity sensor configuration |
| dev=/sys/bus/i2c/devices/3-0054/ |
| val_cycle=1 |
| val_nburst=8 |
| val_freq=1 |
| val_threshold=4 |
| val_filter=2 |
| |
| nv_param_loader 60240 prox_cal |
| val_calibrated=$? |
| case $val_calibrated in |
| 1) |
| nv_param_loader 60240 threshold |
| val_threshold=$? |
| nv_param_loader 60240 rfilter |
| val_filter=$? |
| ;; |
| esac |
| |
| echo $val_cycle > $dev/cycle # Duration Cycle. Valid range is 0 - 3. |
| echo $val_nburst > $dev/nburst # Number of pulses in burst. Valid range is 0 - 15. |
| echo $val_freq > $dev/freq # Burst frequency. Valid range is 0 - 3. |
| echo $val_threshold > $dev/threshold # sensor threshold. Valid range is 0 - 15 (0.12V - 0.87V) |
| echo $val_filter > $dev/filter # RFilter. Valid range is 0 - 3. |
| |
| # LMU AS3676 Configuration |
| dev=/sys/class/leds |
| echo 1,51,255,39,20,6,84 > $dev/lcd-backlight/als/curve # ALS curve for group1 |
| echo 1,0,0,0 > $dev/lcd-backlight/als/params #[gain],[filter_up],[filter_down],[offset] |
| echo 1 > $dev/lcd-backlight/als/enable #Sensor on/off. 1 = on, reg 90h |
| echo 2000 > $dev/button-backlight/max_current |
| |
| # TI BQ275xx firmware loader |
| bq275xx_fwloader |
