overlay/frameworks/base/core/res/res/values/config.xml - device/samsung/tuna - Git at Google

 <?xml version="1.0" encoding="utf-8"?>
 <!--
 /*
 ** Copyright 2011, The Android Open Source Project
 **
 ** Licensed under the Apache License, Version 2.0 (the "License");
 ** you may not use this file except in compliance with the License.
 ** You may obtain a copy of the License at
 **
 **     http://www.apache.org/licenses/LICENSE-2.0
 **
 ** Unless required by applicable law or agreed to in writing, software
 ** distributed under the License is distributed on an "AS IS" BASIS,
 ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 ** See the License for the specific language governing permissions and
 ** limitations under the License.
 */
 -->

 <!-- These resources are around just to allow their values to be customized
      for different hardware and product builds. -->
 <resources>

     <!-- Default color for notification LED is white. -->
     <color name="config_defaultNotificationColor">#ffffffff</color>

     <!-- Default LED on time for notification LED in milliseconds. -->
     <integer name="config_defaultNotificationLedOn">1000</integer>

     <!-- Default LED off time for notification LED in milliseconds. -->
     <integer name="config_defaultNotificationLedOff">9000</integer>

     <!-- Our amoled doesn't animate well. -->
     <bool name="config_animateScreenLights">false</bool>

     <integer name="config_deskDockKeepsScreenOn">0</integer>
     <integer name="config_carDockKeepsScreenOn">1</integer>
     <bool name="config_deskDockEnablesAccelerometer">true</bool>

     <!-- If this is true, the screen will come on when you unplug usb/power/whatever. -->
     <bool name="config_unplugTurnsOnScreen">true</bool>

     <!-- Flag indicating whether we should enable the automatic brightness in Settings.
          config_hardware_automatic_brightness_available is not set, so we will use software implementation -->
     <bool name="config_automatic_brightness_available">true</bool>

     <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
          autodetected from the Configuration. -->
     <bool name="config_showNavigationBar">true</bool>

     <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
          The N entries of this array define N + 1 zones as follows:

          Zone 0:        0 <= LUX < array[0]
          Zone 1:        array[0] <= LUX < array[1]
          ...
          Zone N:        array[N - 1] <= LUX < array[N]
          Zone N + 1:    array[N] <= LUX < infinity

          Must be overridden in platform specific overlays -->
     <integer-array name="config_autoBrightnessLevels">
         <item>6</item>
 	<item>9</item>
 	<item>14</item>
 	<item>20</item>
 	<item>30</item>
 	<item>46</item>
 	<item>68</item>
         <item>103</item>
 	<item>154</item>
         <item>231</item>
 	<item>346</item>
 	<item>519</item>
 	<item>778</item>
 	<item>1168</item>
 	<item>1752</item>
 	<item>2627</item>
 	<item>3941</item>
         <item>5912</item>
 	<item>8867</item>
     </integer-array>

     <!-- Array of output values for LCD backlight corresponding to the LUX values
          in the config_autoBrightnessLevels array.  This array should have size one greater
          than the size of the config_autoBrightnessLevels array.
     -->
     <integer-array name="config_autoBrightnessLcdBacklightValues">
         <item>19</item>
 	<item>23</item>
 	<item>26</item>
 	<item>30</item>
 	<item>34</item>
 	<item>39</item>
 	<item>45</item>
         <item>51</item>
         <item>59</item>
         <item>67</item>
         <item>77</item>
         <item>88</item>
 	<item>101</item>
 	<item>116</item>
 	<item>133</item>
 	<item>152</item>
 	<item>174</item>
 	<item>199</item>
 	<item>228</item>
         <item>250</item>
     </integer-array>

     <!-- Array of output values for button backlight corresponding to the LUX values
          in the config_autoBrightnessLevels array.  This array should have size one greater
          than the size of the config_autoBrightnessLevels array.
     -->
     <integer-array name="config_autoBrightnessButtonBacklightValues">
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
     </integer-array>

     <!-- Array of output values for keyboard backlight corresponding to the LUX values
          in the config_autoBrightnessLevels array.  This array should have size one greater
          than the size of the config_autoBrightnessLevels array.
          Crespo has no keyboard so all values are zero.
     -->
     <integer-array name="config_autoBrightnessKeyboardBacklightValues">
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
         <item>0</item>
     </integer-array>

     <!-- Minimum screen brightness allowed by the power manager. -->
     <integer name="config_screenBrightnessDim">10</integer>

     <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION.
          Please don't copy them, copy anything else. -->

     <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
          [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->
     <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
          before automatically restore the default connection.  Set -1 if the connection
          does not require auto-restore. -->
     <!-- the 6th element indicates boot-time dependency-met value. -->
     <string-array translatable="false" name="networkAttributes">
         <item>"wifi,1,1,1,-1,true"</item>
         <item>"mobile,0,0,0,-1,true"</item>
         <item>"mobile_mms,2,0,2,60000,true"</item>
         <item>"mobile_supl,3,0,2,60000,true"</item>
         <item>"mobile_dun,4,0,3,60000,true"</item>
         <item>"mobile_hipri,5,0,3,60000,true"</item>
         <item>"mobile_bluetooth,7,7,1,-1,true"</item>
         <item>"ethernet,9,9,1,-1,true"</item>
         <item>"wifi_p2p,13,1,0,-1,true"</item>
     </string-array>

     <!-- An Array of "[ConnectivityManager connectionType],
          [# simultaneous connection types]"  -->
     <string-array translatable="false" name="radioAttributes">
         <item>"1,1"</item>
         <item>"0,1"</item>
         <item>"7,1"</item>
         <item>"9,1"</item>
     </string-array>

     <!-- List of regexpressions describing the interface (if any) that represent tetherable
          USB interfaces.  If the device doesn't want to support tething over USB this should
          be empty.  An example would be "usb.*" -->
     <string-array translatable="false" name="config_tether_usb_regexs">
         <item>"rndis0"</item>
     </string-array>

     <!-- List of regexpressions describing the interface (if any) that represent tetherable
          Wifi interfaces.  If the device doesn't want to support tethering over Wifi this
          should be empty.  An example would be "softap.*" -->
     <string-array translatable="false" name="config_tether_wifi_regexs">
         <item>"wlan0"</item>
     </string-array>

     <!-- List of regexpressions describing the interface (if any) that represent tetherable
          bluetooth interfaces.  If the device doesn't want to support tethering over bluetooth this
          should be empty. -->
     <string-array translatable="false" name="config_tether_bluetooth_regexs">
         <item>"bt-pan"</item>
     </string-array>

     <!-- Array of ConnectivityManager.TYPE_xxxx values allowable for tethering -->
     <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or
     <!== [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH -->
     <integer-array translatable="false" name="config_tether_upstream_types">
         <item>0</item>
         <item>1</item>
         <item>5</item>
         <item>7</item>
     </integer-array>

     <!-- Boolean indicating whether the wifi chipset has dual frequency band support -->
     <bool translatable="false" name="config_wifi_dual_band_support">true</bool>

     <!-- Boolean indicating whether the wifi chipset has background scan support -->
     <bool translatable="false" name="config_wifi_background_scan_support">true</bool>

     <bool name="config_ui_enableFadingMarquee">false</bool>

     <string-array name="config_overlay_locationProviderPackageNames" translatable="false">
         <item>com.google.android.location</item>
     </string-array>

     <!-- Is the notification LED intrusive? Used to decide if there should be a disable option -->
     <bool name="config_intrusiveNotificationLed">true</bool>

     <!-- Component name of the default wallpaper. This will be ImageWallpaper if not
          specified -->
     <string name="default_wallpaper_component" translatable="false">com.android.phasebeam/.PhaseBeamWallpaper</string>

     <!-- Vibrator pattern for feedback about touching a virtual key -->
     <integer-array name="config_virtualKeyVibePattern">
         <item>10</item>
     </integer-array>

 </resources>
	<?xml version="1.0" encoding="utf-8"?>
	<!--
	/*
	** Copyright 2011, The Android Open Source Project
	**
	** Licensed under the Apache License, Version 2.0 (the "License");
	** you may not use this file except in compliance with the License.
	** You may obtain a copy of the License at
	**
	** http://www.apache.org/licenses/LICENSE-2.0
	**
	** Unless required by applicable law or agreed to in writing, software
	** distributed under the License is distributed on an "AS IS" BASIS,
	** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	** See the License for the specific language governing permissions and
	** limitations under the License.
	*/
	-->

	<!-- These resources are around just to allow their values to be customized
	for different hardware and product builds. -->
	<resources>

	<!-- Default color for notification LED is white. -->
	<color name="config_defaultNotificationColor">#ffffffff</color>

	<!-- Default LED on time for notification LED in milliseconds. -->
	<integer name="config_defaultNotificationLedOn">1000</integer>

	<!-- Default LED off time for notification LED in milliseconds. -->
	<integer name="config_defaultNotificationLedOff">9000</integer>

	<!-- Our amoled doesn't animate well. -->
	<bool name="config_animateScreenLights">false</bool>

	<integer name="config_deskDockKeepsScreenOn">0</integer>
	<integer name="config_carDockKeepsScreenOn">1</integer>
	<bool name="config_deskDockEnablesAccelerometer">true</bool>

	<!-- If this is true, the screen will come on when you unplug usb/power/whatever. -->
	<bool name="config_unplugTurnsOnScreen">true</bool>

	<!-- Flag indicating whether we should enable the automatic brightness in Settings.
	config_hardware_automatic_brightness_available is not set, so we will use software implementation -->
	<bool name="config_automatic_brightness_available">true</bool>

	<!-- Whether a software navigation bar should be shown. NOTE: in the future this may be
	autodetected from the Configuration. -->
	<bool name="config_showNavigationBar">true</bool>

	<!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
	The N entries of this array define N + 1 zones as follows:

	Zone 0: 0 <= LUX < array[0]
	Zone 1: array[0] <= LUX < array[1]
	...
	Zone N: array[N - 1] <= LUX < array[N]
	Zone N + 1: array[N] <= LUX < infinity

	Must be overridden in platform specific overlays -->
	<integer-array name="config_autoBrightnessLevels">
	<item>6</item>
	<item>9</item>
	<item>14</item>
	<item>20</item>
	<item>30</item>
	<item>46</item>
	<item>68</item>
	<item>103</item>
	<item>154</item>
	<item>231</item>
	<item>346</item>
	<item>519</item>
	<item>778</item>
	<item>1168</item>
	<item>1752</item>
	<item>2627</item>
	<item>3941</item>
	<item>5912</item>
	<item>8867</item>
	</integer-array>

	<!-- Array of output values for LCD backlight corresponding to the LUX values
	in the config_autoBrightnessLevels array. This array should have size one greater
	than the size of the config_autoBrightnessLevels array.
	-->
	<integer-array name="config_autoBrightnessLcdBacklightValues">
	<item>19</item>
	<item>23</item>
	<item>26</item>
	<item>30</item>
	<item>34</item>
	<item>39</item>
	<item>45</item>
	<item>51</item>
	<item>59</item>
	<item>67</item>
	<item>77</item>
	<item>88</item>
	<item>101</item>
	<item>116</item>
	<item>133</item>
	<item>152</item>
	<item>174</item>
	<item>199</item>
	<item>228</item>
	<item>250</item>
	</integer-array>

	<!-- Array of output values for button backlight corresponding to the LUX values
	in the config_autoBrightnessLevels array. This array should have size one greater
	than the size of the config_autoBrightnessLevels array.
	-->
	<integer-array name="config_autoBrightnessButtonBacklightValues">
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	</integer-array>

	<!-- Array of output values for keyboard backlight corresponding to the LUX values
	in the config_autoBrightnessLevels array. This array should have size one greater
	than the size of the config_autoBrightnessLevels array.
	Crespo has no keyboard so all values are zero.
	-->
	<integer-array name="config_autoBrightnessKeyboardBacklightValues">
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	<item>0</item>
	</integer-array>

	<!-- Minimum screen brightness allowed by the power manager. -->
	<integer name="config_screenBrightnessDim">10</integer>

	<!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION.
	Please don't copy them, copy anything else. -->

	<!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
	[associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] -->
	<!-- the 5th element "resore-time" indicates the number of milliseconds to delay
	before automatically restore the default connection. Set -1 if the connection
	does not require auto-restore. -->
	<!-- the 6th element indicates boot-time dependency-met value. -->
	<string-array translatable="false" name="networkAttributes">
	<item>"wifi,1,1,1,-1,true"</item>
	<item>"mobile,0,0,0,-1,true"</item>
	<item>"mobile_mms,2,0,2,60000,true"</item>
	<item>"mobile_supl,3,0,2,60000,true"</item>
	<item>"mobile_dun,4,0,3,60000,true"</item>
	<item>"mobile_hipri,5,0,3,60000,true"</item>
	<item>"mobile_bluetooth,7,7,1,-1,true"</item>
	<item>"ethernet,9,9,1,-1,true"</item>
	<item>"wifi_p2p,13,1,0,-1,true"</item>
	</string-array>

	<!-- An Array of "[ConnectivityManager connectionType],
	[# simultaneous connection types]" -->
	<string-array translatable="false" name="radioAttributes">
	<item>"1,1"</item>
	<item>"0,1"</item>
	<item>"7,1"</item>
	<item>"9,1"</item>
	</string-array>

	<!-- List of regexpressions describing the interface (if any) that represent tetherable
	USB interfaces. If the device doesn't want to support tething over USB this should
	be empty. An example would be "usb.*" -->
	<string-array translatable="false" name="config_tether_usb_regexs">
	<item>"rndis0"</item>
	</string-array>

	<!-- List of regexpressions describing the interface (if any) that represent tetherable
	Wifi interfaces. If the device doesn't want to support tethering over Wifi this
	should be empty. An example would be "softap.*" -->
	<string-array translatable="false" name="config_tether_wifi_regexs">
	<item>"wlan0"</item>
	</string-array>

	<!-- List of regexpressions describing the interface (if any) that represent tetherable
	bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this
	should be empty. -->
	<string-array translatable="false" name="config_tether_bluetooth_regexs">
	<item>"bt-pan"</item>
	</string-array>

	<!-- Array of ConnectivityManager.TYPE_xxxx values allowable for tethering -->
	<!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or
	<!== [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH -->
	<integer-array translatable="false" name="config_tether_upstream_types">
	<item>0</item>
	<item>1</item>
	<item>5</item>
	<item>7</item>
	</integer-array>

	<!-- Boolean indicating whether the wifi chipset has dual frequency band support -->
	<bool translatable="false" name="config_wifi_dual_band_support">true</bool>

	<!-- Boolean indicating whether the wifi chipset has background scan support -->
	<bool translatable="false" name="config_wifi_background_scan_support">true</bool>

	<bool name="config_ui_enableFadingMarquee">false</bool>

	<string-array name="config_overlay_locationProviderPackageNames" translatable="false">
	<item>com.google.android.location</item>
	</string-array>

	<!-- Is the notification LED intrusive? Used to decide if there should be a disable option -->
	<bool name="config_intrusiveNotificationLed">true</bool>

	<!-- Component name of the default wallpaper. This will be ImageWallpaper if not
	specified -->
	<string name="default_wallpaper_component" translatable="false">com.android.phasebeam/.PhaseBeamWallpaper</string>

	<!-- Vibrator pattern for feedback about touching a virtual key -->
	<integer-array name="config_virtualKeyVibePattern">
	<item>10</item>
	</integer-array>

	</resources>