| <?xml version="1.0" encoding="utf-8"?> |
| <!-- |
| /* |
| ** Copyright 2009, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| --> |
| |
| <!-- These resources are around just to allow their values to be customized |
| for different hardware and product builds. --> |
| <resources> |
| <!-- Default color for notification LED is white. --> |
| <color name="config_defaultNotificationColor">#ffffffff</color> |
| |
| <!-- Default LED on time for notification LED in milliseconds. --> |
| <integer name="config_defaultNotificationLedOn">1000</integer> |
| |
| <!-- Default LED off time for notification LED in milliseconds. --> |
| <integer name="config_defaultNotificationLedOff">5000</integer> |
| |
| <!-- This device is not "voice capable"; it's data-only. --> |
| <bool name="config_voice_capable">false</bool> |
| |
| <!-- This device does not allow sms service. --> |
| <bool name="config_sms_capable">false</bool> |
| |
| <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION. |
| Please don't copy them, copy anything else. --> |
| |
| <!-- This string array should be overridden by the device to present a list of network |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[Connection name],[ConnectivityManager connection type], |
| [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] --> |
| <!-- the 5th element "resore-time" indicates the number of milliseconds to delay |
| before automatically restore the default connection. Set -1 if the connection |
| does not require auto-restore. --> |
| <!-- the 6th element indicates boot-time dependency-met value. --> |
| <string-array translatable="false" name="networkAttributes"> |
| <item>"wifi,1,1,2,-1,true"</item> |
| <item>"bluetooth,7,7,0,-1,true"</item> |
| <item>"wifi_p2p,13,1,0,-1,true"</item> |
| <item>"ethernet,9,9,9,-1,true"</item> |
| </string-array> |
| |
| <!-- This string array should be overridden by the device to present a list of radio |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[ConnectivityManager connectionType], |
| [# simultaneous connection types]" --> |
| <string-array translatable="false" name="radioAttributes"> |
| <item>"1,1"</item> |
| <item>"7,1"</item> |
| <item>"9,1"</item> |
| </string-array> |
| |
| |
| <!-- Array of allowable ConnectivityManager network types for tethering --> |
| <integer-array translatable="false" name="config_tether_upstream_types"> |
| </integer-array> |
| |
| <!-- Boolean indicating whether the wifi chipset has dual frequency band support --> |
| <bool translatable="false" name="config_wifi_dual_band_support">true</bool> |
| |
| <!-- Boolean indicating whether the wifi chipset has background scan support --> |
| <bool translatable="false" name="config_wifi_background_scan_support">true</bool> |
| |
| <!-- Flag indicating whether we should enable the automatic brightness in Settings. |
| config_hardware_automatic_brightness_available is not set, so we will use software implementation --> |
| <bool name="config_automatic_brightness_available">true</bool> |
| |
| <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support. |
| The N entries of this array define N + 1 control points as follows: |
| (1-based arrays) |
| |
| Point 1: (0, value[1]): lux <= 0 |
| Point 2: (level[1], value[2]): 0 < lux <= level[1] |
| Point 3: (level[2], value[3]): level[2] < lux <= level[3] |
| ... |
| Point N+1: (level[N], value[N+1]): level[N] < lux |
| |
| The control points must be strictly increasing. Each control point |
| corresponds to an entry in the brightness backlight values arrays. |
| For example, if LUX == level[1] (first element of the levels array) |
| then the brightness will be determined by value[2] (second element |
| of the brightness values array). |
| |
| Spline interpolation is used to determine the auto-brightness |
| backlight values for LUX levels between these control points. |
| |
| Must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLevels"> |
| <item>10</item> <!-- Pitch black 0, and 9 is next possible value. --> |
| <item>30</item> <!-- Sensor in dark office: 60, well lit: 220 --> |
| <item>90</item> <!-- Sensor in dark office: 60, well lit: 220 --> |
| <item>15000</item> <!-- Screen under direct sunlight, but not sensor. --> |
| <item>225000</item> <!-- Sensor under direct sunlight. --> |
| </integer-array> |
| |
| <!-- Array of output values for LCD backlight corresponding to the LUX values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| The brightness values must be between 0 and 255 and be non-decreasing. |
| This must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLcdBacklightValues"> |
| <item>10</item> |
| <item>13</item> |
| <item>65</item> |
| <item>85</item> |
| <item>220</item> |
| <item>255</item> |
| </integer-array> |
| |
| <!-- Array of output values for button backlight corresponding to the LUX values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| The brightness values must be between 0 and 255 and be non-decreasing. |
| This must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessButtonBacklightValues"> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| </integer-array> |
| |
| <!-- Array of output values for keyboard backlight corresponding to the LUX values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| The brightness values must be between 0 and 255 and be non-decreasing. |
| This must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessKeyboardBacklightValues"> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| </integer-array> |
| |
| <!-- Screen brightness used to dim the screen when the user activity |
| timeout expires. May be less than the minimum allowed brightness setting |
| that can be set by the user. --> |
| <integer name="config_screenBrightnessDim">2</integer> |
| |
| <!-- If this is true, the screen will come on when you unplug usb/power/whatever. --> |
| <bool name="config_unplugTurnsOnScreen">true</bool> |
| |
| <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be |
| autodetected from the Configuration. --> |
| <bool name="config_showNavigationBar">true</bool> |
| |
| <!-- Is the notification LED intrusive? Used to decide if there should be a disable option --> |
| <bool name="config_intrusiveNotificationLed">true</bool> |
| |
| <!-- Maximum number of supported users --> |
| <integer name="config_multiuserMaximumUsers">8</integer> |
| |
| <bool name="config_ui_enableFadingMarquee">false</bool> |
| |
| <!-- Indicate whether closing the lid causes the device to go to sleep and opening |
| it causes the device to wake up. |
| The default is false. --> |
| <bool name="config_lidControlsSleep">true</bool> |
| |
| <!-- Manta cannot send the microphone switch through the uevent mechanism. Setting this |
| true forces it to use the/dev/input/event subsystem. --> |
| <bool name="config_useDevInputEventForAudioJack">true</bool> |
| |
| <bool name="config_enableWifiDisplay">true</bool> |
| </resources> |
