| <?xml version="1.0" encoding="utf-8"?> |
| <!-- |
| /* |
| ** Copyright 2009, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| --> |
| |
| <!-- These resources are around just to allow their values to be customized |
| for different hardware and product builds. --> |
| <resources> |
| <!-- Flag indicating whether we should enable the automatic brightness in Settings. |
| config_hardware_automatic_brightness_available is not set, so we will use software implementation --> |
| <bool name="config_automatic_brightness_available">true</bool> |
| |
| <!-- There is no charging LED. --> |
| <bool name="config_unplugTurnsOnScreen">true</bool> |
| |
| <!-- Our amoled doesn't animate well. --> |
| <bool name="config_animateScreenLights">false</bool> |
| |
| <!-- disable menu hard key on Crespo in non-pattern lockscreen --> |
| <bool name="config_disableMenuKeyInLockScreen">true</bool> |
| |
| <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support. |
| The N entries of this array define N + 1 zones as follows: |
| |
| Zone 0: 0 <= LUX < array[0] |
| Zone 1: array[0] <= LUX < array[1] |
| ... |
| Zone N: array[N - 1] <= LUX < array[N] |
| Zone N + 1: array[N] <= LUX < infinity |
| |
| Must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLevels"> |
| <item>100</item> |
| <item>200</item> |
| <item>400</item> |
| <item>1000</item> |
| <item>3000</item> |
| </integer-array> |
| |
| <!-- Array of output values for LCD backlight corresponding to the LUX values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| --> |
| <integer-array name="config_autoBrightnessLcdBacklightValues"> |
| <item>10</item> |
| <item>35</item> |
| <item>55</item> |
| <item>70</item> |
| <item>70</item> |
| <item>250</item> |
| </integer-array> |
| |
| <!-- Array of output values for button backlight corresponding to the LUX values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| --> |
| <integer-array name="config_autoBrightnessButtonBacklightValues"> |
| <item>255</item> |
| <item>255</item> |
| <item>255</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| </integer-array> |
| |
| <!-- Array of output values for keyboard backlight corresponding to the LUX values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| Crespo has no keyboard so all values are zero. |
| --> |
| <integer-array name="config_autoBrightnessKeyboardBacklightValues"> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| <item>0</item> |
| </integer-array> |
| |
| <!-- Minimum screen brightness allowed by the power manager. --> |
| <integer name="config_screenBrightnessDim">10</integer> |
| |
| <!-- Component name of the default wallpaper. This will be ImageWallpaper if not |
| specified --> |
| <string name="default_wallpaper_component">com.android.wallpaper/.nexus.NexusWallpaper</string> |
| |
| <integer name="config_deskDockKeepsScreenOn">0</integer> |
| <integer name="config_carDockKeepsScreenOn">1</integer> |
| |
| <!-- Default color for notification LED is white --> |
| <color name="config_defaultNotificationColor">#ffffffff</color> |
| |
| <!-- Default blink frequency for notification LED is 9 seconds. --> |
| <integer name="config_defaultNotificationLedOff">9000</integer> |
| |
| <!-- Component name of the service providing network location support. --> |
| <string name="config_networkLocationProvider">com.google.android.location.NetworkLocationProvider</string> |
| |
| <!-- Component name of the service providing geocoder API support. --> |
| <string name="config_geocodeProvider">com.google.android.location.GeocodeProvider</string> |
| |
| |
| <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION. |
| Please don't copy them, copy anything else. --> |
| |
| <!-- This string array should be overridden by the device to present a list of network |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[Connection name],[ConnectivityManager connection type], |
| [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] --> |
| <!-- the 5th element "resore-time" indicates the number of milliseconds to delay |
| before automatically restore the default connection. Set -1 if the connection |
| does not require auto-restore. --> |
| <!-- the 6th element indicates boot-time dependency-met value. --> |
| <string-array translatable="false" name="networkAttributes"> |
| <item>"wifi,1,1,1,-1,true"</item> |
| <item>"mobile,0,0,0,-1,true"</item> |
| <item>"mobile_mms,2,0,2,60000,true"</item> |
| <item>"mobile_supl,3,0,2,60000,true"</item> |
| <item>"mobile_dun,4,0,4,60000,true"</item> |
| <item>"mobile_hipri,5,0,3,60000,true"</item> |
| <item>"bluetooth,7,7,0,-1,true"</item> |
| </string-array> |
| |
| <!-- This string array should be overridden by the device to present a list of radio |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[ConnectivityManager connectionType], |
| [# simultaneous connection types]" --> |
| <string-array translatable="false" name="radioAttributes"> |
| <item>"1,1"</item> |
| <item>"0,1"</item> |
| <item>"7,1"</item> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| USB interfaces. If the device doesn't want to support tething over USB this should |
| be empty. An example would be "usb.*" --> |
| <string-array translatable="false" name="config_tether_usb_regexs"> |
| <item>"rndis0"</item> |
| </string-array> |
| |
| <!-- Array of allowable ConnectivityManager network types for tethering --> |
| <!-- Common options are [1, 4] for wifi and dun or [0,1,5,7] for --> |
| <!-- mobile, wifi, hipri and bluetooth --> |
| <integer-array translatable="false" name="config_tether_upstream_types"> |
| <item>0</item> |
| <item>1</item> |
| <item>5</item> |
| <item>7</item> |
| </integer-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| Wifi interfaces. If the device doesn't want to support tethering over Wifi this |
| should be empty. An example would be "softap.*" --> |
| <string-array translatable="false" name="config_tether_wifi_regexs"> |
| <item>"wl0.1"</item> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this |
| should be empty. --> |
| <string-array translatable="false" name="config_tether_bluetooth_regexs"> |
| <item>"bnep\\d"</item> |
| </string-array> |
| |
| <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap --> |
| <integer-array name="config_keyboardTapVibePattern"> |
| <item>30</item> |
| </integer-array> |
| |
| <!-- Vibrator pattern for feedback about booting with safe mode disabled --> |
| <integer-array name="config_safeModeDisabledVibePattern"> |
| <item>1</item> |
| </integer-array> |
| |
| <!-- crespo doesn't handle this blur effect very quickly. --> |
| <bool name="config_sf_slowBlur">true</bool> |
| |
| |
| <!-- Boolean indicating if restoring network selection should be skipped --> |
| <!-- The restoring is handled by modem if it is true --> |
| <bool translatable="false" name="skip_restoring_network_selection">true</bool> |
| |
| <!-- Specifies the amount of time to disable virtual keys after the screen is touched |
| in order to filter out accidental virtual key presses due to swiping gestures |
| or taps near the edge of the display. May be 0 to disable the feature. |
| It is recommended that this value be no more than 250 ms. |
| This feature should be disabled for most devices. --> |
| <integer name="config_virtualKeyQuietTimeMillis">250</integer> |
| |
| <!-- Boolean indicating if current platform supports bluetooth wide band |
| speech --> |
| <bool name="config_bluetooth_wide_band_speech">false</bool> |
| |
| <bool name="config_ui_enableFadingMarquee">false</bool> |
| |
| </resources> |
