| # Copyright (C) 2010 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| |
| # This file is the device-specific product definition file for |
| # crespo. It lists all the overlays, files, modules and properties |
| # that are specific to this hardware: i.e. those are device-specific |
| # drivers, configuration files, settings, etc... |
| |
| # Note that crespo is not a fully open device. Some of the drivers |
| # aren't publicly available in all circumstances, which means that some |
| # of the hardware capabilities aren't present in builds where those |
| # drivers aren't available. Such cases are handled by having this file |
| # separated into two halves: this half here contains the parts that |
| # are available to everyone, while another half in the vendor/ hierarchy |
| # augments that set with the parts that are only relevant when all the |
| # associated drivers are available. Aspects that are irrelevant but |
| # harmless in no-driver builds should be kept here for simplicity and |
| # transparency. There are two variants of the half that deals with |
| # the unavailable drivers: one is directly checked into the unreleased |
| # vendor tree and is used by engineers who have access to it. The other |
| # is generated by setup-makefile.sh in the same directory as this files, |
| # and is used by people who have access to binary versions of the drivers |
| # but not to the original vendor tree. Be sure to update both. |
| |
| |
| |
| # These is the hardware-specific overlay, which points to the location |
| # of hardware-specific resource overrides, typically the frameworks and |
| # application settings that are stored in resourced. |
| DEVICE_PACKAGE_OVERLAYS := device/samsung/crespo/overlay |
| |
| # These are the hardware-specific configuration files |
| PRODUCT_COPY_FILES := \ |
| device/samsung/crespo/vold.fstab:system/etc/vold.fstab \ |
| device/samsung/crespo/egl.cfg:system/lib/egl/egl.cfg |
| |
| # Init files |
| PRODUCT_COPY_FILES += \ |
| device/samsung/crespo/init.herring.rc:root/init.herring.rc \ |
| device/samsung/crespo/init.herring.usb.rc:root/init.herring.usb.rc \ |
| device/samsung/crespo/ueventd.herring.rc:root/ueventd.herring.rc |
| |
| # Prebuilt kl and kcm keymaps |
| PRODUCT_COPY_FILES += \ |
| device/samsung/crespo/s3c-keypad.kl:system/usr/keylayout/s3c-keypad.kl \ |
| device/samsung/crespo/s3c-keypad.kcm:system/usr/keychars/s3c-keypad.kcm \ |
| device/samsung/crespo/herring-keypad.kl:system/usr/keylayout/herring-keypad.kl \ |
| device/samsung/crespo/herring-keypad.kcm:system/usr/keychars/herring-keypad.kcm \ |
| device/samsung/crespo/cypress-touchkey.kl:system/usr/keylayout/cypress-touchkey.kl \ |
| device/samsung/crespo/cypress-touchkey.kcm:system/usr/keychars/cypress-touchkey.kcm \ |
| device/samsung/crespo/sec_jack.kl:system/usr/keylayout/sec_jack.kl \ |
| device/samsung/crespo/sec_jack.kcm:system/usr/keychars/sec_jack.kcm \ |
| device/samsung/crespo/mxt224_ts_input.kl:system/usr/keylayout/mxt224_ts_input.kl \ |
| device/samsung/crespo/mxt224_ts_input.kcm:system/usr/keychars/mxt224_ts_input.kcm |
| |
| #Bluetooth setup |
| PRODUCT_COPY_FILES += \ |
| system/bluetooth/data/main.conf:system/etc/bluetooth/main.conf \ |
| |
| #NVRAM setup |
| PRODUCT_COPY_FILES += \ |
| device/samsung/crespo/nvram_net.txt:system/vendor/firmware/nvram_net.txt |
| |
| #MFC Firmware |
| PRODUCT_COPY_FILES += \ |
| device/samsung/crespo/samsung_mfc_fw.bin:system/vendor/firmware/samsung_mfc_fw.bin |
| |
| # NFC |
| PRODUCT_PACKAGES += \ |
| libnfc \ |
| libnfc_jni \ |
| Nfc \ |
| Tag |
| |
| # Commands to migrate prefs from com.android.nfc3 to com.android.nfc |
| PRODUCT_COPY_FILES += \ |
| packages/apps/Nfc/migrate_nfc.txt:system/etc/updatecmds/migrate_nfc.txt |
| |
| # file that declares the MIFARE NFC constant |
| PRODUCT_COPY_FILES += \ |
| device/sample/nxp/com.nxp.mifare.xml:system/etc/permissions/com.nxp.mifare.xml |
| |
| # NFC EXTRAS add-on API |
| PRODUCT_PACKAGES += \ |
| com.android.nfc_extras |
| PRODUCT_COPY_FILES += \ |
| frameworks/base/nfc-extras/com.android.nfc_extras.xml:system/etc/permissions/com.android.nfc_extras.xml |
| |
| # NFCEE access control |
| ifeq ($(TARGET_BUILD_VARIANT),user) |
| NFCEE_ACCESS_PATH := device/samsung/crespo/nfcee_access.xml |
| else |
| NFCEE_ACCESS_PATH := device/samsung/crespo/nfcee_access_debug.xml |
| endif |
| PRODUCT_COPY_FILES += \ |
| $(NFCEE_ACCESS_PATH):system/etc/nfcee_access.xml |
| |
| # Generated kcm keymaps |
| PRODUCT_PACKAGES += \ |
| s3c-keypad.kcm \ |
| cypress-touchkey.kcm |
| |
| # Filesystem management tools |
| PRODUCT_PACKAGES += \ |
| make_ext4fs \ |
| setup_fs |
| |
| PRODUCT_CHARACTERISTICS := nosdcard |
| |
| # These are the OpenMAX IL configuration files |
| PRODUCT_COPY_FILES += \ |
| device/samsung/crespo/sec_mm/sec_omx/sec_omx_core/secomxregistry:system/etc/secomxregistry \ |
| device/samsung/crespo/media_profiles.xml:system/etc/media_profiles.xml |
| |
| |
| # These are the OpenMAX IL modules |
| PRODUCT_PACKAGES += \ |
| libSEC_OMX_Core \ |
| libOMX.SEC.AVC.Decoder \ |
| libOMX.SEC.M4V.Decoder \ |
| libOMX.SEC.M4V.Encoder \ |
| libOMX.SEC.AVC.Encoder |
| |
| # Misc other modules |
| PRODUCT_PACKAGES += \ |
| lights.s5pc110 \ |
| hwcomposer.s5pc110 \ |
| sensors.herring |
| |
| # Camera |
| PRODUCT_PACKAGES += \ |
| camera.herring |
| |
| # audio |
| PRODUCT_PACKAGES += \ |
| audio_policy.herring \ |
| audio.primary.herring \ |
| audio.a2dp.default \ |
| libaudioutils |
| |
| # NFC |
| PRODUCT_PACKAGES += \ |
| nfc.herring |
| |
| # Libs |
| PRODUCT_PACKAGES += \ |
| libcamera \ |
| libstagefrighthw \ |
| com.android.future.usb.accessory |
| |
| # Input device calibration files |
| PRODUCT_COPY_FILES += \ |
| device/samsung/crespo/mxt224_ts_input.idc:system/usr/idc/mxt224_ts_input.idc |
| |
| # for bugmailer |
| PRODUCT_PACKAGES += send_bug |
| PRODUCT_COPY_FILES += \ |
| system/extras/bugmailer/bugmailer.sh:system/bin/bugmailer.sh \ |
| system/extras/bugmailer/send_bug:system/bin/send_bug |
| |
| # These are the hardware-specific features |
| PRODUCT_COPY_FILES += \ |
| frameworks/base/data/etc/handheld_core_hardware.xml:system/etc/permissions/handheld_core_hardware.xml \ |
| frameworks/base/data/etc/android.hardware.camera.flash-autofocus.xml:system/etc/permissions/android.hardware.camera.flash-autofocus.xml \ |
| frameworks/base/data/etc/android.hardware.camera.front.xml:system/etc/permissions/android.hardware.camera.front.xml \ |
| frameworks/base/data/etc/android.hardware.location.gps.xml:system/etc/permissions/android.hardware.location.gps.xml \ |
| frameworks/base/data/etc/android.hardware.wifi.xml:system/etc/permissions/android.hardware.wifi.xml \ |
| frameworks/base/data/etc/android.hardware.sensor.proximity.xml:system/etc/permissions/android.hardware.sensor.proximity.xml \ |
| frameworks/base/data/etc/android.hardware.sensor.light.xml:system/etc/permissions/android.hardware.sensor.light.xml \ |
| frameworks/base/data/etc/android.hardware.sensor.gyroscope.xml:system/etc/permissions/android.hardware.sensor.gyroscope.xml \ |
| frameworks/base/data/etc/android.hardware.touchscreen.multitouch.jazzhand.xml:system/etc/permissions/android.hardware.touchscreen.multitouch.jazzhand.xml \ |
| frameworks/base/data/etc/android.hardware.nfc.xml:system/etc/permissions/android.hardware.nfc.xml \ |
| frameworks/base/data/etc/android.software.sip.voip.xml:system/etc/permissions/android.software.sip.voip.xml \ |
| frameworks/base/data/etc/android.hardware.usb.accessory.xml:system/etc/permissions/android.hardware.usb.accessory.xml \ |
| packages/wallpapers/LivePicker/android.software.live_wallpaper.xml:system/etc/permissions/android.software.live_wallpaper.xml |
| |
| # The OpenGL ES API level that is natively supported by this device. |
| # This is a 16.16 fixed point number |
| PRODUCT_PROPERTY_OVERRIDES := \ |
| ro.opengles.version=131072 |
| |
| # These are the hardware-specific settings that are stored in system properties. |
| # Note that the only such settings should be the ones that are too low-level to |
| # be reachable from resources or other mechanisms. |
| PRODUCT_PROPERTY_OVERRIDES += \ |
| wifi.interface=wlan0 \ |
| wifi.supplicant_scan_interval=15 |
| |
| # Set default USB interface |
| PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \ |
| persist.sys.usb.config=mass_storage |
| |
| include frameworks/base/build/phone-hdpi-512-dalvik-heap.mk |
| |
| # we have enough storage space to hold precise GC data |
| PRODUCT_TAGS += dalvik.gc.type-precise |
| |
| # Screen size is "normal", density is "hdpi" |
| PRODUCT_AAPT_CONFIG := normal hdpi |
| |
| ifeq ($(TARGET_PREBUILT_WIFI_MODULE),) |
| LOCAL_WIFI_MODULE := device/samsung/crespo/bcm4329.ko |
| else |
| LOCAL_WIFI_MODULE := $(TARGET_PREBUILT_WIFI_MODULE) |
| endif |
| |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_WIFI_MODULE):system/modules/bcm4329.ko |
| |
| ifeq ($(TARGET_PREBUILT_KERNEL),) |
| LOCAL_KERNEL := device/samsung/crespo/kernel |
| else |
| LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL) |
| endif |
| |
| PRODUCT_COPY_FILES += \ |
| $(LOCAL_KERNEL):kernel |
| |
| $(call inherit-product-if-exists, vendor/nxp/pn544/nxp-pn544-fw-vendor.mk) |