| /* |
| * Copyright (C) 2009/2010 Motorola Inc. |
| * All Rights Reserved. |
| * Motorola Confidential Restricted. |
| */ |
| |
| |
| #ifndef MASTERCLEAR_BP_H_ |
| #define MASTERCLEAR_BP_H_ |
| |
| #define CMD_ENGINE_FD_NOT_INIT -1 |
| #define CMD_ENGINE_DEVICE "/dev/ttyUSB3" |
| /* Number of times to try to connect to aux engine */ |
| #define CMD_ENGINE_CONNECT_MAX_TRY 30 |
| /* Delay between each aux engine connect try, in microseconds */ |
| #define CMD_ENGINE_CONNECT_TRY_DELAY 1000000 |
| #define CMD_CMN_DRV_BP_MASTERCLEAR_OPCODE 0x0012 |
| #define CMD_BP_MASTER_CLEAR 0x01 |
| #define CMD_BP_MASTER_RESET 0x00 |
| #define CMD_BP_MASTER_RESET_DATALENTH 0x01 |
| |
| #define MDM_CTRL_DEVICE "/sys/class/radio/mdm6600/command" |
| #define MDM_CMD_SHUTDONW "shutdown" |
| #define MDM_CMD_POWERUP "powerup" |
| #define MDM_CMD_FLASH_MODE "bootmode_flash" |
| #define MDM_CMD_NORMAL_MODE "bootmode_normal" |
| |
| #define CMD_DEFS_RSP_FLAG_FAIL 0x04 |
| #define TC_DBG_MAX_DUMP_COLS 16 |
| /* CMD header values */ |
| #define CMD_DEFS_HDR_FLAG_CMD_RSP_COMMAND 0 /**< Header indicates a command */ |
| #define CMD_DEFS_HDR_FLAG_CMD_RSP_RESPONSE 1 /**< Header indicates a response */ |
| |
| #define CMD_DEFS_HDR_FLAG_RESPONSE_EXPECTED 0 /**< Header indicates a response is expected */ |
| #define CMD_DEFS_HDR_FLAG_RESPONSE_NOT_EXPECTED 1 /**< Header indicates a response is not expected */ |
| |
| #define CMD_DEFS_HDR_FLAG_RESPONSE_SOLICITED 0 /**< Header indicates a solicited response */ |
| #define CMD_DEFS_HDR_FLAG_RESPONSE_UNSOLICITED 1 /**< Header indicates a unsolicited response */ |
| |
| #define CMD_DEFS_HDR_FLAG_DATA_NOT_PRESENT 0 /**< Header indicates response data present */ |
| #define CMD_DEFS_HDR_FLAG_DATA_PRESENT 1 /**< Header indicates no response data present */ |
| |
| #define CMD_DEFS_HDR_FLAG_CMD_NOT_FAILED 0 /**< Header indicates command did not fail */ |
| #define CMD_DEFS_HDR_FLAG_CMD_FAILED 1 /**< Header indicates command failed */ |
| |
| #define CMD_DBG_MAX_DUMP_COLS 16 |
| |
| #define CMD_DEFS_OPCODE_T UINT16 |
| |
| #ifndef TRUE |
| #define TRUE 1 |
| #define FALSE 0 |
| #endif |
| |
| |
| static const char *USB1_SETUP_FILE = "/sys/bus/usb/devices/usb2/power/control"; |
| static const char setup_cmd[] = "on"; |
| |
| typedef unsigned char UINT8; /**< Unsigned 8 bit integer */ |
| typedef signed char INT8; /**< Signed 8 bit integer */ |
| typedef unsigned short int UINT16; /**< Unsigned 16 bit integer */ |
| typedef signed short int INT16; /**< Signed 16 bit integer */ |
| typedef unsigned int UINT32; /**< Unsigned 32 bit integer */ |
| typedef signed int INT32; /**< Signed 32 bit integer */ |
| typedef signed long long INT64; /**< Signed 64 bit integer */ |
| typedef unsigned long long UINT64; /**< Unsigned 64 bit integer */ |
| typedef unsigned char BOOLEAN; /**< Boolean type */ |
| typedef BOOLEAN BOOL; /**< Boolean type */ |
| typedef unsigned short W_CHAR; /**< Wide char */ |
| |
| typedef enum |
| { |
| CMD_RSP_CODE_PAR_ERR_LENGTH = 0x00, /**< Parser length error */ |
| CMD_RSP_CODE_PAR_ERR_SECUR = 0x01, /**< Parser security error */ |
| CMD_RSP_CODE_PAR_ERR_PROT = 0x02, /**< Parser protocol error */ |
| CMD_RSP_CODE_PAR_ERR_MODE = 0x03, /**< Parser mode error */ |
| CMD_RSP_CODE_PAR_ERR_OPCODE = 0x04, /**< Parser opcode error */ |
| CMD_RSP_CODE_PAR_ERR_PARM = 0x05, /**< Parser parameter error */ |
| CMD_RSP_CODE_CMD_RSP_GENERIC = 0x06, /**< Generic Response */ |
| CMD_RSP_CODE_CMD_RSP_GEN_FAIL = 0x07, /**< General failure */ |
| CMD_RSP_CODE_CMD_MALLOC_FAIL = 0x0A, /**< Error allocating memory */ |
| CMD_RSP_CODE_CMD_INTL_ERR = 0x0B, /**< Tcmd internal error */ |
| CMD_RSP_CODE_CMD_RSP_TIMEOUT = 0x0C, /**< Timeout error */ |
| CMD_RSP_CODE_CMD_PAR_ERR_SUBMODE = 0x0D, /**< Parser submode error */ |
| CMD_RSP_CODE_CMD_TRANS_LEN_ERR = 0x0E, /**< Transport length error */ |
| CMD_RSP_CODE_CMD_RSP_IRRE_ERR = 0x0F, /**< Irrecoverable error */ |
| CMD_RSP_CODE_CMD_RSP_MUX_ERR = 0x11, /**< Open mux channel error */ |
| |
| CMD_RSP_CODE_ASCII_ERR_LENGTH = 0x80, /**< ASCII length error */ |
| CMD_RSP_CODE_ASCII_ERR_MODE = 0x83, /**< ASCII mode error */ |
| CMD_RSP_CODE_ASCII_ERR_OPCODE = 0x84, /**< ASCII opcode error */ |
| CMD_RSP_CODE_ASCII_ERR_PARM = 0x85, /**< ASCII parameter error */ |
| CMD_RSP_CODE_ASCII_RSP_GEN_FAIL = 0x87, /**< ASCII Generic Failure */ |
| CMD_RSP_CODE_ASCII_MALLOC_FAIL = 0x8A, /**< ASCII allocating memory error */ |
| CMD_RSP_CODE_ASCII_RSP_TIMEOUT = 0x8C, /**< ASCII timeout error */ |
| CMD_RSP_CODE_ASCII_RSP_MUX_ERR = 0x91, /**< ASCII mux channel error */ |
| |
| /** Add all new standard response codes before CMD_RSP_CODE_NOT_SET */ |
| CMD_RSP_CODE_NOT_SET |
| } CMD_RSP_CODE_T; |
| |
| static int cmd_engine_fd = CMD_ENGINE_FD_NOT_INIT; /**< Handle to the aux engine */ |
| |
| typedef enum |
| { |
| CMD_ENGINE_INIT_SUCCESS = 0, |
| CMD_ENGINE_INIT_FAIL = 1, |
| CMD_ENGINE_INIT_NOT_PRESENT = 2 |
| } CMD_ENGINE_INIT_T; |
| /** The Command Protocol Header (Bulk Endpoint/12 byte) - Request Header */ |
| typedef struct |
| { |
| UINT8 reserved1 : 7; /**< Reserved */ |
| UINT8 cmd_rsp_flag : 1; /**< Command/Response Flag */ |
| UINT8 seq_tag; /**< Sequence Tag */ |
| CMD_DEFS_OPCODE_T opcode; /**< Opcode */ |
| UINT8 reserved2; /**< Reserved */ |
| UINT8 no_rsp_reqd_flag : 1; /**< No Response Required Flag */ |
| UINT8 reserved3 : 7; /**< Reserved */ |
| UINT16 reserved4; /**< Reserved */ |
| UINT32 length; /**< Data Length of Request */ |
| } CMD_DEFS_CMD_REQ_HDR_T; |
| |
| /** The Command Protocol Header (Bulk Endpoint/12 byte) - Response Header */ |
| typedef struct |
| { |
| UINT8 unsol_rsp_flag : 1; /**< Unsolicited Response Flag */ |
| UINT8 data_flag : 1; /**< Response Data Flag */ |
| UINT8 fail_flag : 1; /**< Fail Flag */ |
| UINT8 cmd_version : 4; /**< CMD Version Number */ |
| UINT8 cmd_rsp_flag : 1; /**< Command/Response Flag */ |
| UINT8 seq_tag; /**< Sequence Tag */ |
| CMD_DEFS_OPCODE_T opcode; /**< Opcode */ |
| UINT8 reserved1; /**< Reserved */ |
| UINT8 rsp_code; /**< Response Code. For real */ |
| UINT16 reserved2; /**< Reserved */ |
| UINT32 length; /**< Data Length of Response */ |
| |
| } CMD_DEFS_CMD_RSP_HDR_T; |
| |
| /* |
| * BP master clear |
| * BP master clear |
| * Parameters: |
| * none |
| * Return code: |
| * 0 - BP master clear successfully |
| * other - error code |
| */ |
| |
| int bp_master_clear(void); |
| |
| |
| #endif |
