| /* |
| * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| * |
| * Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * |
| * Neither the name of ARM nor the names of its contributors may be used |
| * to endorse or promote products derived from this software without specific |
| * prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef __CONTEXT_H__ |
| #define __CONTEXT_H__ |
| |
| /******************************************************************************* |
| * Constants that allow assembler code to access members of and the 'gp_regs' |
| * structure at their correct offsets. |
| ******************************************************************************/ |
| #define CTX_GPREGS_OFFSET 0x0 |
| #define CTX_GPREG_X0 0x0 |
| #define CTX_GPREG_X1 0x8 |
| #define CTX_GPREG_X2 0x10 |
| #define CTX_GPREG_X3 0x18 |
| #define CTX_GPREG_X4 0x20 |
| #define CTX_GPREG_X5 0x28 |
| #define CTX_GPREG_X6 0x30 |
| #define CTX_GPREG_X7 0x38 |
| #define CTX_GPREG_X8 0x40 |
| #define CTX_GPREG_X9 0x48 |
| #define CTX_GPREG_X10 0x50 |
| #define CTX_GPREG_X11 0x58 |
| #define CTX_GPREG_X12 0x60 |
| #define CTX_GPREG_X13 0x68 |
| #define CTX_GPREG_X14 0x70 |
| #define CTX_GPREG_X15 0x78 |
| #define CTX_GPREG_X16 0x80 |
| #define CTX_GPREG_X17 0x88 |
| #define CTX_GPREG_X18 0x90 |
| #define CTX_GPREG_X19 0x98 |
| #define CTX_GPREG_X20 0xa0 |
| #define CTX_GPREG_X21 0xa8 |
| #define CTX_GPREG_X22 0xb0 |
| #define CTX_GPREG_X23 0xb8 |
| #define CTX_GPREG_X24 0xc0 |
| #define CTX_GPREG_X25 0xc8 |
| #define CTX_GPREG_X26 0xd0 |
| #define CTX_GPREG_X27 0xd8 |
| #define CTX_GPREG_X28 0xe0 |
| #define CTX_GPREG_X29 0xe8 |
| #define CTX_GPREG_LR 0xf0 |
| #define CTX_GPREG_SP_EL0 0xf8 |
| #define CTX_GPREGS_END 0x100 |
| |
| /******************************************************************************* |
| * Constants that allow assembler code to access members of and the 'el3_state' |
| * structure at their correct offsets. Note that some of the registers are only |
| * 32-bits wide but are stored as 64-bit values for convenience |
| ******************************************************************************/ |
| #define CTX_EL3STATE_OFFSET (CTX_GPREGS_OFFSET + CTX_GPREGS_END) |
| #define CTX_SCR_EL3 0x0 |
| #define CTX_RUNTIME_SP 0x8 |
| #define CTX_SPSR_EL3 0x10 |
| #define CTX_ELR_EL3 0x18 |
| #define CTX_EL3STATE_END 0x20 |
| |
| /******************************************************************************* |
| * Constants that allow assembler code to access members of and the |
| * 'el1_sys_regs' structure at their correct offsets. Note that some of the |
| * registers are only 32-bits wide but are stored as 64-bit values for |
| * convenience |
| ******************************************************************************/ |
| #define CTX_SYSREGS_OFFSET (CTX_EL3STATE_OFFSET + CTX_EL3STATE_END) |
| #define CTX_SPSR_EL1 0x0 |
| #define CTX_ELR_EL1 0x8 |
| #define CTX_SPSR_ABT 0x10 |
| #define CTX_SPSR_UND 0x18 |
| #define CTX_SPSR_IRQ 0x20 |
| #define CTX_SPSR_FIQ 0x28 |
| #define CTX_SCTLR_EL1 0x30 |
| #define CTX_ACTLR_EL1 0x38 |
| #define CTX_CPACR_EL1 0x40 |
| #define CTX_CSSELR_EL1 0x48 |
| #define CTX_SP_EL1 0x50 |
| #define CTX_ESR_EL1 0x58 |
| #define CTX_TTBR0_EL1 0x60 |
| #define CTX_TTBR1_EL1 0x68 |
| #define CTX_MAIR_EL1 0x70 |
| #define CTX_AMAIR_EL1 0x78 |
| #define CTX_TCR_EL1 0x80 |
| #define CTX_TPIDR_EL1 0x88 |
| #define CTX_TPIDR_EL0 0x90 |
| #define CTX_TPIDRRO_EL0 0x98 |
| #define CTX_DACR32_EL2 0xa0 |
| #define CTX_IFSR32_EL2 0xa8 |
| #define CTX_PAR_EL1 0xb0 |
| #define CTX_FAR_EL1 0xb8 |
| #define CTX_AFSR0_EL1 0xc0 |
| #define CTX_AFSR1_EL1 0xc8 |
| #define CTX_CONTEXTIDR_EL1 0xd0 |
| #define CTX_VBAR_EL1 0xd8 |
| /* |
| * If the timer registers aren't saved and restored, we don't have to reserve |
| * space for them in the context |
| */ |
| #if NS_TIMER_SWITCH |
| #define CTX_CNTP_CTL_EL0 0xe0 |
| #define CTX_CNTP_CVAL_EL0 0xe8 |
| #define CTX_CNTV_CTL_EL0 0xf0 |
| #define CTX_CNTV_CVAL_EL0 0xf8 |
| #define CTX_CNTKCTL_EL1 0x100 |
| #define CTX_FP_FPEXC32_EL2 0x108 |
| #define CTX_SYSREGS_END 0x110 |
| #else |
| #define CTX_FP_FPEXC32_EL2 0xe0 |
| #define CTX_SYSREGS_END 0xf0 |
| #endif |
| |
| /******************************************************************************* |
| * Constants that allow assembler code to access members of and the 'fp_regs' |
| * structure at their correct offsets. |
| ******************************************************************************/ |
| #if CTX_INCLUDE_FPREGS |
| #define CTX_FPREGS_OFFSET (CTX_SYSREGS_OFFSET + CTX_SYSREGS_END) |
| #define CTX_FP_Q0 0x0 |
| #define CTX_FP_Q1 0x10 |
| #define CTX_FP_Q2 0x20 |
| #define CTX_FP_Q3 0x30 |
| #define CTX_FP_Q4 0x40 |
| #define CTX_FP_Q5 0x50 |
| #define CTX_FP_Q6 0x60 |
| #define CTX_FP_Q7 0x70 |
| #define CTX_FP_Q8 0x80 |
| #define CTX_FP_Q9 0x90 |
| #define CTX_FP_Q10 0xa0 |
| #define CTX_FP_Q11 0xb0 |
| #define CTX_FP_Q12 0xc0 |
| #define CTX_FP_Q13 0xd0 |
| #define CTX_FP_Q14 0xe0 |
| #define CTX_FP_Q15 0xf0 |
| #define CTX_FP_Q16 0x100 |
| #define CTX_FP_Q17 0x110 |
| #define CTX_FP_Q18 0x120 |
| #define CTX_FP_Q19 0x130 |
| #define CTX_FP_Q20 0x140 |
| #define CTX_FP_Q21 0x150 |
| #define CTX_FP_Q22 0x160 |
| #define CTX_FP_Q23 0x170 |
| #define CTX_FP_Q24 0x180 |
| #define CTX_FP_Q25 0x190 |
| #define CTX_FP_Q26 0x1a0 |
| #define CTX_FP_Q27 0x1b0 |
| #define CTX_FP_Q28 0x1c0 |
| #define CTX_FP_Q29 0x1d0 |
| #define CTX_FP_Q30 0x1e0 |
| #define CTX_FP_Q31 0x1f0 |
| #define CTX_FP_FPSR 0x200 |
| #define CTX_FP_FPCR 0x208 |
| #define CTX_FPREGS_END 0x210 |
| #endif |
| |
| #ifndef __ASSEMBLY__ |
| |
| #include <cassert.h> |
| #include <platform_def.h> /* for CACHE_WRITEBACK_GRANULE */ |
| #include <stdint.h> |
| |
| /* |
| * Common constants to help define the 'cpu_context' structure and its |
| * members below. |
| */ |
| #define DWORD_SHIFT 3 |
| #define DEFINE_REG_STRUCT(name, num_regs) \ |
| typedef struct name { \ |
| uint64_t _regs[num_regs]; \ |
| } __aligned(16) name##_t |
| |
| /* Constants to determine the size of individual context structures */ |
| #define CTX_GPREG_ALL (CTX_GPREGS_END >> DWORD_SHIFT) |
| #define CTX_SYSREG_ALL (CTX_SYSREGS_END >> DWORD_SHIFT) |
| #if CTX_INCLUDE_FPREGS |
| #define CTX_FPREG_ALL (CTX_FPREGS_END >> DWORD_SHIFT) |
| #endif |
| #define CTX_EL3STATE_ALL (CTX_EL3STATE_END >> DWORD_SHIFT) |
| |
| /* |
| * AArch64 general purpose register context structure. Usually x0-x18, |
| * lr are saved as the compiler is expected to preserve the remaining |
| * callee saved registers if used by the C runtime and the assembler |
| * does not touch the remaining. But in case of world switch during |
| * exception handling, we need to save the callee registers too. |
| */ |
| DEFINE_REG_STRUCT(gp_regs, CTX_GPREG_ALL); |
| |
| /* |
| * AArch64 EL1 system register context structure for preserving the |
| * architectural state during switches from one security state to |
| * another in EL1. |
| */ |
| DEFINE_REG_STRUCT(el1_sys_regs, CTX_SYSREG_ALL); |
| |
| /* |
| * AArch64 floating point register context structure for preserving |
| * the floating point state during switches from one security state to |
| * another. |
| */ |
| #if CTX_INCLUDE_FPREGS |
| DEFINE_REG_STRUCT(fp_regs, CTX_FPREG_ALL); |
| #endif |
| |
| /* |
| * Miscellaneous registers used by EL3 firmware to maintain its state |
| * across exception entries and exits |
| */ |
| DEFINE_REG_STRUCT(el3_state, CTX_EL3STATE_ALL); |
| |
| /* |
| * Macros to access members of any of the above structures using their |
| * offsets |
| */ |
| #define read_ctx_reg(ctx, offset) ((ctx)->_regs[offset >> DWORD_SHIFT]) |
| #define write_ctx_reg(ctx, offset, val) (((ctx)->_regs[offset >> DWORD_SHIFT]) \ |
| = val) |
| |
| /* |
| * Top-level context structure which is used by EL3 firmware to |
| * preserve the state of a core at EL1 in one of the two security |
| * states and save enough EL3 meta data to be able to return to that |
| * EL and security state. The context management library will be used |
| * to ensure that SP_EL3 always points to an instance of this |
| * structure at exception entry and exit. Each instance will |
| * correspond to either the secure or the non-secure state. |
| */ |
| typedef struct cpu_context { |
| gp_regs_t gpregs_ctx; |
| el3_state_t el3state_ctx; |
| el1_sys_regs_t sysregs_ctx; |
| #if CTX_INCLUDE_FPREGS |
| fp_regs_t fpregs_ctx; |
| #endif |
| } cpu_context_t; |
| |
| /* Macros to access members of the 'cpu_context_t' structure */ |
| #define get_el3state_ctx(h) (&((cpu_context_t *) h)->el3state_ctx) |
| #if CTX_INCLUDE_FPREGS |
| #define get_fpregs_ctx(h) (&((cpu_context_t *) h)->fpregs_ctx) |
| #endif |
| #define get_sysregs_ctx(h) (&((cpu_context_t *) h)->sysregs_ctx) |
| #define get_gpregs_ctx(h) (&((cpu_context_t *) h)->gpregs_ctx) |
| |
| /* |
| * Compile time assertions related to the 'cpu_context' structure to |
| * ensure that the assembler and the compiler view of the offsets of |
| * the structure members is the same. |
| */ |
| CASSERT(CTX_GPREGS_OFFSET == __builtin_offsetof(cpu_context_t, gpregs_ctx), \ |
| assert_core_context_gp_offset_mismatch); |
| CASSERT(CTX_SYSREGS_OFFSET == __builtin_offsetof(cpu_context_t, sysregs_ctx), \ |
| assert_core_context_sys_offset_mismatch); |
| #if CTX_INCLUDE_FPREGS |
| CASSERT(CTX_FPREGS_OFFSET == __builtin_offsetof(cpu_context_t, fpregs_ctx), \ |
| assert_core_context_fp_offset_mismatch); |
| #endif |
| CASSERT(CTX_EL3STATE_OFFSET == __builtin_offsetof(cpu_context_t, el3state_ctx), \ |
| assert_core_context_el3state_offset_mismatch); |
| |
| /* |
| * Helper macro to set the general purpose registers that correspond to |
| * parameters in an aapcs_64 call i.e. x0-x7 |
| */ |
| #define set_aapcs_args0(ctx, x0) do { \ |
| write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X0, x0); \ |
| } while (0); |
| #define set_aapcs_args1(ctx, x0, x1) do { \ |
| write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X1, x1); \ |
| set_aapcs_args0(ctx, x0); \ |
| } while (0); |
| #define set_aapcs_args2(ctx, x0, x1, x2) do { \ |
| write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X2, x2); \ |
| set_aapcs_args1(ctx, x0, x1); \ |
| } while (0); |
| #define set_aapcs_args3(ctx, x0, x1, x2, x3) do { \ |
| write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X3, x3); \ |
| set_aapcs_args2(ctx, x0, x1, x2); \ |
| } while (0); |
| #define set_aapcs_args4(ctx, x0, x1, x2, x3, x4) do { \ |
| write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X4, x4); \ |
| set_aapcs_args3(ctx, x0, x1, x2, x3); \ |
| } while (0); |
| #define set_aapcs_args5(ctx, x0, x1, x2, x3, x4, x5) do { \ |
| write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X5, x5); \ |
| set_aapcs_args4(ctx, x0, x1, x2, x3, x4); \ |
| } while (0); |
| #define set_aapcs_args6(ctx, x0, x1, x2, x3, x4, x5, x6) do { \ |
| write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X6, x6); \ |
| set_aapcs_args5(ctx, x0, x1, x2, x3, x4, x5); \ |
| } while (0); |
| #define set_aapcs_args7(ctx, x0, x1, x2, x3, x4, x5, x6, x7) do { \ |
| write_ctx_reg(get_gpregs_ctx(ctx), CTX_GPREG_X7, x7); \ |
| set_aapcs_args6(ctx, x0, x1, x2, x3, x4, x5, x6); \ |
| } while (0); |
| |
| /******************************************************************************* |
| * Function prototypes |
| ******************************************************************************/ |
| void el1_sysregs_context_save(el1_sys_regs_t *regs); |
| void el1_sysregs_context_restore(el1_sys_regs_t *regs); |
| #if CTX_INCLUDE_FPREGS |
| void fpregs_context_save(fp_regs_t *regs); |
| void fpregs_context_restore(fp_regs_t *regs); |
| #endif |
| |
| |
| #undef CTX_SYSREG_ALL |
| #if CTX_INCLUDE_FPREGS |
| #undef CTX_FPREG_ALL |
| #endif |
| #undef CTX_GPREG_ALL |
| #undef CTX_EL3STATE_ALL |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| #endif /* __CONTEXT_H__ */ |
