NetworkPkg: Fix typos in comments
- assocated -> associated
- malformated -> malformatted
- mal-formated -> mal-formatted
- formated -> formatted
- octects -> octets
- responsiblity -> responsibility
- enought -> enough
- immediatly -> immediately
- integar -> integer
- Alogrithem -> Algorithm
- Initializeion -> Initialization
- primelenght -> primelength
- Vlaue -> Value
- perfoms -> performs
- randome -> random
- verifed -> verified
- finallization -> finalization
- Intializes -> Initializes
- specifed -> specified
- if -> If
- Decrption -> Decryption
- Autahentication -> Authentication
- informatino -> information
- alogrithm -> algorithm
- Authenticaion -> Authentication
- Alogrithem -> Algorithm
- containning -> containing
- paramter -> parameter
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-By: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-By: Jiaxin Wu <jiaxin.wu@intel.com>
diff --git a/NetworkPkg/Application/Ping6/Ping6.c b/NetworkPkg/Application/Ping6/Ping6.c
index 55314e5..66daac2 100644
--- a/NetworkPkg/Application/Ping6/Ping6.c
+++ b/NetworkPkg/Application/Ping6/Ping6.c
@@ -1103,7 +1103,7 @@
BufferSize = 16;
//
- // Parse the paramter of count number.
+ // Parse the parameter of count number.
//
ValueStr = ShellCommandLineGetValue (ParamPackage, L"-n");
ValueStrPtr = ValueStr;
@@ -1120,7 +1120,7 @@
}
}
//
- // Parse the paramter of buffer size.
+ // Parse the parameter of buffer size.
//
ValueStr = ShellCommandLineGetValue (ParamPackage, L"-l");
ValueStrPtr = ValueStr;
@@ -1141,7 +1141,7 @@
ZeroMem (&DstAddress, sizeof (EFI_IPv6_ADDRESS));
//
- // Parse the paramter of source ip address.
+ // Parse the parameter of source ip address.
//
ValueStr = ShellCommandLineGetValue (ParamPackage, L"-s");
ValueStrPtr = ValueStr;
@@ -1155,7 +1155,7 @@
}
}
//
- // Parse the paramter of destination ip address.
+ // Parse the parameter of destination ip address.
//
NonOptionCount = ShellCommandLineGetCount(ParamPackage);
ValueStr = ShellCommandLineGetRawValue (ParamPackage, (UINT32)(NonOptionCount-1));
diff --git a/NetworkPkg/IScsiDxe/IScsiProto.c b/NetworkPkg/IScsiDxe/IScsiProto.c
index 88d9bdd..eb77d75 100644
--- a/NetworkPkg/IScsiDxe/IScsiProto.c
+++ b/NetworkPkg/IScsiDxe/IScsiProto.c
@@ -786,7 +786,7 @@
case ISCSI_LOGIN_OPERATIONAL_NEGOTIATION:
//
- // Only negotiate the paramter once.
+ // Only negotiate the parameter once.
//
if (!Conn->ParamNegotiated) {
IScsiFillOpParams (Conn, Nbuf);
@@ -2117,7 +2117,7 @@
@param[in] Packet The EXT SCSI PASS THRU request packet containing the SCSI command.
@param[in] Lun The LUN.
- @param[in] Tcb The tcb assocated with this SCSI command.
+ @param[in] Tcb The tcb associated with this SCSI command.
@return The created iSCSI SCSI command PDU.
@retval NULL Other errors as indicated.
diff --git a/NetworkPkg/Ip6Dxe/Ip6ConfigImpl.c b/NetworkPkg/Ip6Dxe/Ip6ConfigImpl.c
index 75ecec1..9b6a62e 100644
--- a/NetworkPkg/Ip6Dxe/Ip6ConfigImpl.c
+++ b/NetworkPkg/Ip6Dxe/Ip6ConfigImpl.c
@@ -121,7 +121,7 @@
if (NewPolicy == Ip6ConfigPolicyAutomatic) {
//
- // Set paramters to trigger router solicitation sending in timer handler.
+ // Set parameters to trigger router solicitation sending in timer handler.
//
IpSb->RouterAdvertiseReceived = FALSE;
IpSb->SolicitTimer = IP6_MAX_RTR_SOLICITATIONS;
diff --git a/NetworkPkg/Ip6Dxe/Ip6Option.c b/NetworkPkg/Ip6Dxe/Ip6Option.c
index 9a91fd7..21d28b6 100644
--- a/NetworkPkg/Ip6Dxe/Ip6Option.c
+++ b/NetworkPkg/Ip6Dxe/Ip6Option.c
@@ -18,7 +18,7 @@
/**
Validate the IP6 option format for both the packets we received
and that we will transmit. It will compute the ICMPv6 error message fields
- if the option is malformated.
+ if the option is malformatted.
@param[in] IpSb The IP6 service data.
@param[in] Packet The to be validated packet.
@@ -29,7 +29,7 @@
@retval TRUE The option is properly formatted.
- @retval FALSE The option is malformated.
+ @retval FALSE The option is malformatted.
**/
BOOLEAN
@@ -126,7 +126,7 @@
@param[in] OptionLen The length of the whole option.
@retval TRUE The option is properly formatted.
- @retval FALSE The option is malformated.
+ @retval FALSE The option is malformatted.
**/
BOOLEAN
@@ -231,7 +231,7 @@
/**
Validate the IP6 extension header format for both the packets we received
and that we will transmit. It will compute the ICMPv6 error message fields
- if the option is mal-formated.
+ if the option is mal-formatted.
@param[in] IpSb The IP6 service instance. This is an optional parameter.
@param[in] Packet The data of the packet. Ignored if NULL.
@@ -252,8 +252,8 @@
@param[out] Fragmented Indicate whether the packet is fragmented.
This is an optional parameter that may be NULL.
- @retval TRUE The option is properly formated.
- @retval FALSE The option is malformated.
+ @retval TRUE The option is properly formatted.
+ @retval FALSE The option is malformatted.
**/
BOOLEAN
@@ -436,7 +436,7 @@
//
// RFC2460, ICMP Parameter Problem message with code 0 should be sent
- // if the length of a fragment is not a multiple of 8 octects and the M
+ // if the length of a fragment is not a multiple of 8 octets and the M
// flag of that fragment is 1, pointing to the Payload length field of the
// fragment packet.
//
@@ -606,7 +606,7 @@
@param[in] ExtHdrsLen The length of the extension headers.
@param[in] FragmentOffset The fragment offset of the data following the header.
@param[out] UpdatedExtHdrs The updated ExtHdrs with Fragment header inserted.
- It's caller's responsiblity to free this buffer.
+ It's caller's responsibility to free this buffer.
@retval EFI_OUT_OF_RESOURCES Failed to finish the operation due to lake of
resource.
diff --git a/NetworkPkg/Ip6Dxe/Ip6Option.h b/NetworkPkg/Ip6Dxe/Ip6Option.h
index b62a042..242ec51 100644
--- a/NetworkPkg/Ip6Dxe/Ip6Option.h
+++ b/NetworkPkg/Ip6Dxe/Ip6Option.h
@@ -51,7 +51,7 @@
/**
Validate the IP6 extension header format for both the packets we received
and that we will transmit. It will compute the ICMPv6 error message fields
- if the option is mal-formated.
+ if the option is mal-formatted.
@param[in] IpSb The IP6 service instance. This is an optional parameter.
@param[in] Packet The data of the packet. Ignored if NULL.
@@ -72,8 +72,8 @@
@param[out] Fragmented Indicate whether the packet is fragmented.
This is an optional parameter that may be NULL.
- @retval TRUE The option is properly formated.
- @retval FALSE The option is malformated.
+ @retval TRUE The option is properly formatted.
+ @retval FALSE The option is malformatted.
**/
BOOLEAN
@@ -122,7 +122,7 @@
@param[in] ExtHdrsLen The length of the extension headers.
@param[in] FragmentOffset The fragment offset of the data following the header.
@param[out] UpdatedExtHdrs The updated ExtHdrs with Fragment header inserted.
- It's caller's responsiblity to free this buffer.
+ It's caller's responsibility to free this buffer.
@retval EFI_OUT_OF_RESOURCES Failed to finish the operation due to lake of
resource.
@@ -179,7 +179,7 @@
@param[in] OptionLen The length of the whole option.
@retval TRUE The option is properly formatted.
- @retval FALSE The option is malformated.
+ @retval FALSE The option is malformatted.
**/
BOOLEAN
diff --git a/NetworkPkg/Ip6Dxe/Ip6Output.c b/NetworkPkg/Ip6Dxe/Ip6Output.c
index fe642d3..8330e37 100644
--- a/NetworkPkg/Ip6Dxe/Ip6Output.c
+++ b/NetworkPkg/Ip6Dxe/Ip6Output.c
@@ -23,7 +23,7 @@
@param[in] IpSb Points to an IP6 service binding instance.
@param[out] SourceList The list entry head of all source addresses.
- It is the caller's responsiblity to free the
+ It is the caller's responsibility to free the
resources.
@param[out] SourceCount The number of source addresses.
@@ -364,7 +364,7 @@
@param[in] LastHeader The pointer of next header of last extension header.
@param[in] HeadLen The length of the unfragmented part of the IP6 header.
- @retval EFI_BAD_BUFFER_SIZE There is no enought room in the head space of
+ @retval EFI_BAD_BUFFER_SIZE There is no enough room in the head space of
Packet.
@retval EFI_SUCCESS The operation performed successfully.
@@ -726,7 +726,7 @@
}
//
- // Send out multicast neighbor solicitation for address resolution immediatly.
+ // Send out multicast neighbor solicitation for address resolution immediately.
//
Ip6CreateSNMulticastAddr (&NeighborCache->Neighbor, &Destination);
Status = Ip6SelectSourceAddress (IpSb, &NeighborCache->Neighbor, &Source);
@@ -809,7 +809,7 @@
//
// OK, selected the source and route, fragment the packet then send
// them. Tag each fragment other than the first one as spawn from it.
- // Each extension header is an integar multiple of 8 octets long, in
+ // Each extension header is an integer multiple of 8 octets long, in
// order to retain 8-octet alignment for subsequent headers.
//
Mtu = IpSb->MaxPacketSize + sizeof (EFI_IP6_HEADER);
diff --git a/NetworkPkg/IpSecDxe/IpSecCryptIo.c b/NetworkPkg/IpSecDxe/IpSecCryptIo.c
index dca4423..31fa4fb 100644
--- a/NetworkPkg/IpSecDxe/IpSecCryptIo.c
+++ b/NetworkPkg/IpSecDxe/IpSecCryptIo.c
@@ -45,7 +45,7 @@
BOOLEAN mInitialRandomSeed = FALSE;
/**
- Get the block size of specified encryption alogrithm.
+ Get the block size of specified encryption algorithm.
@param[in] AlgorithmId The encryption algorithm ID.
@@ -69,7 +69,7 @@
}
/**
- Get the key length of the specified encryption alogrithm.
+ Get the key length of the specified encryption algorithm.
@param[in] AlgorithmId The encryption algorithm ID.
@@ -93,7 +93,7 @@
}
/**
- Get the IV size of the specified encryption alogrithm.
+ Get the IV size of the specified encryption algorithm.
@param[in] AlgorithmId The encryption algorithm ID.
@@ -144,7 +144,7 @@
}
/**
- Get the ICV size of the specified Authenticaion alogrithm.
+ Get the ICV size of the specified Authenticaion algorithm.
@param[in] AlgorithmId The Authentication algorithm ID.
@@ -191,7 +191,7 @@
}
/**
- Get index of the specified encryption alogrithm from the mIpsecEncryptAlgorithemList.
+ Get index of the specified encryption algorithm from the mIpsecEncryptAlgorithmList.
@param[in] AlgorithmId The encryption algorithm ID.
@@ -215,7 +215,7 @@
}
/**
- Get index of the specified encryption alogrithm from the mIpsecAuthAlgorithemList.
+ Get index of the specified encryption algorithm from the mIpsecAuthAlgorithmList.
@param[in] AlgorithmId The encryption algorithm ID.
@@ -245,14 +245,14 @@
Encrypt the buffer.
This function calls relevant encryption interface from CryptoLib according to
- the input alogrithm ID. The InData should be multiple of block size. This function
+ the input algorithm ID. The InData should be multiple of block size. This function
doesn't perform the padding. If it has the Ivec data, the length of it should be
same with the block size. The block size is different from the different algorithm.
- @param[in] AlgorithmId The Alogrithem identification defined in RFC.
+ @param[in] AlgorithmId The Algorithm identification defined in RFC.
@param[in] Key Pointer to the buffer containing encrypting key.
@param[in] KeyBits The length of the key in bits.
- @param[in] Ivec Point to the buffer containning the Initializeion
+ @param[in] Ivec Point to the buffer containing the Initialization
Vector (IV) data.
@param[in] InData Point to the buffer containing the data to be
encrypted.
@@ -331,14 +331,14 @@
Decrypts the buffer.
This function calls relevant Decryption interface from CryptoLib according to
- the input alogrithm ID. The InData should be multiple of block size. This function
+ the input algorithm ID. The InData should be multiple of block size. This function
doesn't perform the padding. If it has the Ivec data, the length of it should be
same with the block size. The block size is different from the different algorithm.
- @param[in] AlgorithmId The Alogrithem identification defined in RFC.
+ @param[in] AlgorithmId The Algorithm identification defined in RFC.
@param[in] Key Pointer to the buffer containing encrypting key.
@param[in] KeyBits The length of the key in bits.
- @param[in] Ivec Point to the buffer containning the Initializeion
+ @param[in] Ivec Point to the buffer containing the Initialization
Vector (IV) data.
@param[in] InData Point to the buffer containing the data to be
decrypted.
@@ -417,9 +417,9 @@
Digests the Payload with key and store the result into the OutData.
This function calls relevant Hmac interface from CryptoLib according to
- the input alogrithm ID. It computes all datas from InDataFragment and output
+ the input algorithm ID. It computes all datas from InDataFragment and output
the result into the OutData buffer. If the OutDataSize is larger than the related
- HMAC alogrithm output size, return EFI_INVALID_PARAMETER.
+ HMAC algorithm output size, return EFI_INVALID_PARAMETER.
@param[in] AlgorithmId The authentication Identification.
@param[in] Key Pointer of the authentication key.
@@ -540,9 +540,9 @@
Digests the Payload and store the result into the OutData.
This function calls relevant Hash interface from CryptoLib according to
- the input alogrithm ID. It computes all datas from InDataFragment and output
+ the input algorithm ID. It computes all datas from InDataFragment and output
the result into the OutData buffer. If the OutDataSize is larger than the related
- Hash alogrithm output size, return EFI_INVALID_PARAMETER.
+ Hash algorithm output size, return EFI_INVALID_PARAMETER.
@param[in] AlgorithmId The authentication Identification.
@param[in] InDataFragment A list contains all data to be authenticated.
@@ -657,14 +657,14 @@
Generates the Diffie-Hellman public key.
This function first initiate a DHContext, then call the DhSetParameter() to set
- the prime and primelenght, at end call the DhGenerateKey() to generates random
+ the prime and primelength, at end call the DhGenerateKey() to generates random
secret exponent, and computes the public key. The output returned via parameter
PublicKey and PublicKeySize. DH context is updated accordingly. If the PublicKey
buffer is too small to hold the public key, EFI_INVALID_PARAMETER is returned
and PublicKeySize is set to the required buffer size to obtain the public key.
@param[in, out] DhContext Pointer to the DH context.
- @param[in] Generator Vlaue of generator.
+ @param[in] Generator Value of generator.
@param[in] PrimeLength Length in bits of prime to be generated.
@param[in] Prime Pointer to the buffer to receive the generated
prime number.
@@ -673,7 +673,7 @@
For out, the size of data returned in PublicKey
buffer in bytes.
- @retval EFI_SUCCESS The operation perfoms successfully.
+ @retval EFI_SUCCESS The operation performs successfully.
@retval Otherwise The operation is failed.
**/
@@ -725,7 +725,7 @@
For out, the size of data returned in Key
buffer in bytes.
- @retval EFI_SUCCESS The operation perfoms successfully.
+ @retval EFI_SUCCESS The operation performs successfully.
@retval Otherwise The operation is failed.
**/
@@ -750,7 +750,7 @@
@param[in, out] DhContext Pointer to the DH context to be freed.
- @retval EFI_SUCCESS The operation perfoms successfully.
+ @retval EFI_SUCCESS The operation performs successfully.
@retval EFI_INVALID_PARAMETER The DhContext is NULL.
**/
@@ -773,9 +773,9 @@
If the Random Generator wasn't initiated, initiate it first, then call RandomBytes.
@param[out] OutBuffer Pointer to buffer to receive random value.
- @param[in] Bytes Size of randome bytes to generate.
+ @param[in] Bytes Size of random bytes to generate.
- @retval EFI_SUCCESS The operation perfoms successfully.
+ @retval EFI_SUCCESS The operation performs successfully.
@retval Otherwise The operation is failed.
**/
@@ -869,9 +869,9 @@
@param[in] CertLen The size of Certificate in bytes.
@param[in] InCa Pointer to the CA certificate
@param[in] CaLen The size of CA certificate in bytes.
- @param[in] InData Pointer to octect message hash to be checked.
+ @param[in] InData Pointer to octet message hash to be checked.
@param[in] InDataSize Size of the message hash in bytes.
- @param[in] Singnature The pointer to the RSA PKCS1-V1_5 signature to be verifed.
+ @param[in] Singnature The pointer to the RSA PKCS1-V1_5 signature to be verified.
@param[in] SigSize Size of signature in bytes.
@retval TRUE Valid signature encoded in PKCS1-v1_5.
diff --git a/NetworkPkg/IpSecDxe/IpSecCryptIo.h b/NetworkPkg/IpSecDxe/IpSecCryptIo.h
index 0e106af..0ef83eb 100644
--- a/NetworkPkg/IpSecDxe/IpSecCryptIo.h
+++ b/NetworkPkg/IpSecDxe/IpSecCryptIo.h
@@ -104,7 +104,7 @@
);
/**
- Prototype of HMAC finallization.
+ Prototype of HMAC finalization.
Terminate a HMAC message digest operation and output the message digest.
If Context is NULL, then ASSERT().
@@ -139,7 +139,7 @@
/**
Prototype of Block Cipher initiation.
- Intializes the user-supplied key as the specifed context (key materials) for both
+ Initializes the user-supplied key as the specified context (key materials) for both
encryption and decryption operations.
If Context is NULL, then ASSERT().
@@ -165,7 +165,7 @@
Encrypts plaintext message with the specified cipher.
If Context is NULL, then ASSERT().
- if InData is NULL, then ASSERT().
+ If InData is NULL, then ASSERT().
If Size of input data is not multiple of Cipher algorithm related block size,
then ASSERT().
@@ -193,7 +193,7 @@
Decrypts cipher message with specified cipher.
If Context is NULL, then ASSERT().
- if InData is NULL, then ASSERT().
+ If InData is NULL, then ASSERT().
If Size of input data is not a multiple of a certaion block size , then ASSERT().
@param[in] Context The specified Context.
@@ -256,7 +256,7 @@
This function performs digest on a data buffer of the specified size.
It can be called multiple times to compute the digest of long or discontinuous data streams.
- Context should be already correctly intialized by HashInit(), and should not be finalized
+ Context should be already correctly initialized by HashInit(), and should not be finalized
by HashFinal(). Behavior with invalid context is undefined.
If Context is NULL, then ASSERT().
@@ -285,7 +285,7 @@
This function completes hash computation and retrieves the digest value into
the specified memory. After this function has been called, the context cannot
be used again.
- context should be already correctly intialized by HashInit(), and should not be
+ context should be already correctly initialized by HashInit(), and should not be
finalized by HashFinal(). Behavior with invalid context is undefined.
If Context is NULL, then ASSERT().
@@ -339,13 +339,13 @@
//
CRYPTO_CIPHER_ENCRYPT CipherEncrypt;
//
- // The Function pointer of Cipher Decrption.
+ // The Function pointer of Cipher Decryption.
//
CRYPTO_CIPHER_DECRYPT CipherDecrypt;
} ENCRYPT_ALGORITHM;
//
-// The struct used to store the information and operation of Autahentication algorithm.
+// The struct used to store the information and operation of Authentication algorithm.
//
typedef struct _AUTH_ALGORITHM {
//
@@ -383,7 +383,7 @@
} AUTH_ALGORITHM;
//
-// The struct used to store the informatino and operation of Hash algorithm.
+// The struct used to store the information and operation of Hash algorithm.
//
typedef struct _HASH_ALGORITHM {
//
@@ -421,7 +421,7 @@
} HASH_ALGORITHM;
/**
- Get the IV size of specified encryption alogrithm.
+ Get the IV size of specified encryption algorithm.
@param[in] AlgorithmId The encryption algorithm ID.
@@ -434,7 +434,7 @@
);
/**
- Get the block size of specified encryption alogrithm.
+ Get the block size of specified encryption algorithm.
@param[in] AlgorithmId The encryption algorithm ID.
@@ -447,7 +447,7 @@
);
/**
- Get the required key length of the specified encryption alogrithm.
+ Get the required key length of the specified encryption algorithm.
@param[in] AlgorithmId The encryption algorithm ID.
@@ -460,7 +460,7 @@
);
/**
- Get the ICV size of the specified Authenticaion alogrithm.
+ Get the ICV size of the specified Authentication algorithm.
@param[in] AlgorithmId The Authentication algorithm ID.
@@ -475,7 +475,7 @@
/**
Get the HMAC digest length by the specified Algorithm ID.
- @param[in] AlgorithmId The specified Alogrithm ID.
+ @param[in] AlgorithmId The specified Algorithm ID.
@return The digest length of the specified Authentication Algorithm ID.
@@ -505,14 +505,14 @@
Encrypt the buffer.
This function calls relevant encryption interface from CryptoLib according to
- the input alogrithm ID. The InData should be multiple of block size. This function
+ the input algorithm ID. The InData should be multiple of block size. This function
doesn't perform the padding. If it has the Ivec data, the length of it should be
same with the block size. The block size is different from the different algorithm.
- @param[in] AlgorithmId The Alogrithem identification defined in RFC.
+ @param[in] AlgorithmId The Algorithm identification defined in RFC.
@param[in] Key Pointer to the buffer containing encrypting key.
@param[in] KeyBits The length of the key in bits.
- @param[in] Ivec Point to the buffer containning the Initializeion
+ @param[in] Ivec Point to the buffer containing the Initialization
Vector (IV) data.
@param[in] InData Point to the buffer containing the data to be
encrypted.
@@ -540,14 +540,14 @@
Decrypts the buffer.
This function calls relevant Decryption interface from CryptoLib according to
- the input alogrithm ID. The InData should be multiple of block size. This function
+ the input algorithm ID. The InData should be multiple of block size. This function
doesn't perform the padding. If it has the Ivec data, the length of it should be
same with the block size. The block size is different from the different algorithm.
- @param[in] AlgorithmId The Alogrithem identification defined in RFC.
+ @param[in] AlgorithmId The Algorithm identification defined in RFC.
@param[in] Key Pointer to the buffer containing encrypting key.
@param[in] KeyBits The length of the key in bits.
- @param[in] Ivec Point to the buffer containning the Initializeion
+ @param[in] Ivec Point to the buffer containing the Initialization
Vector (IV) data.
@param[in] InData Point to the buffer containing the data to be
decrypted.
@@ -575,9 +575,9 @@
Digests the Payload with key and store the result into the OutData.
This function calls relevant Hmac interface from CryptoLib according to
- the input alogrithm ID. It computes all datas from InDataFragment and output
+ the input algorithm ID. It computes all datas from InDataFragment and output
the result into the OutData buffer. If the OutDataSize is larger than the related
- HMAC alogrithm output size, return EFI_INVALID_PARAMETER.
+ HMAC algorithm output size, return EFI_INVALID_PARAMETER.
@param[in] AlgorithmId The authentication Identification.
@param[in] Key Pointer of the authentication key.
@@ -609,9 +609,9 @@
Digests the Payload and store the result into the OutData.
This function calls relevant Hash interface from CryptoLib according to
- the input alogrithm ID. It computes all datas from InDataFragment and output
+ the input algorithm ID. It computes all datas from InDataFragment and output
the result into the OutData buffer. If the OutDataSize is larger than the related
- Hash alogrithm output size, return EFI_INVALID_PARAMETER.
+ Hash algorithm output size, return EFI_INVALID_PARAMETER.
@param[in] AlgorithmId The authentication Identification.
@param[in] InDataFragment A list contains all data to be authenticated.
@@ -640,14 +640,14 @@
Generates the Diffie-Hellman public key.
This function first initiate a DHContext, then call the DhSetParameter() to set
- the prime and primelenght, at end call the DhGenerateKey() to generates random
+ the prime and primelength, at end call the DhGenerateKey() to generates random
secret exponent, and computes the public key. The output returned via parameter
PublicKey and PublicKeySize. DH context is updated accordingly. If the PublicKey
buffer is too small to hold the public key, EFI_INVALID_PARAMETER is returned
and PublicKeySize is set to the required buffer size to obtain the public key.
@param[in, out] DhContext Pointer to the DH context.
- @param[in] Generator Vlaue of generator.
+ @param[in] Generator Value of generator.
@param[in] PrimeLength Length in bits of prime to be generated.
@param[in] Prime Pointer to the buffer to receive the generated
prime number.
@@ -656,7 +656,7 @@
For out, the size of data returned in PublicKey
buffer in bytes.
- @retval EFI_SUCCESS The operation perfoms successfully.
+ @retval EFI_SUCCESS The operation performs successfully.
@retval Otherwise The operation is failed.
**/
@@ -684,7 +684,7 @@
For out, the size of data returned in Key
buffer in bytes.
- @retval EFI_SUCCESS The operation perfoms successfully.
+ @retval EFI_SUCCESS The operation performs successfully.
@retval Otherwise The operation is failed.
**/
@@ -702,7 +702,7 @@
@param[in, out] DhContext Pointer to the DH context to be freed.
- @retval EFI_SUCCESS The operation perfoms successfully.
+ @retval EFI_SUCCESS The operation performs successfully.
@retval EFI_INVALID_PARAMETER The DhContext is NULL.
**/
@@ -717,9 +717,9 @@
If the Random Generator wasn't initiated, initiate it first, then call RandomBytes.
@param[out] OutBuffer Pointer to buffer to receive random value.
- @param[in] Bytes Size of randome bytes to generate.
+ @param[in] Bytes Size of random bytes to generate.
- @retval EFI_SUCCESS The operation perfoms successfully.
+ @retval EFI_SUCCESS The operation performs successfully.
@retval Otherwise The operation is failed.
**/
@@ -762,9 +762,9 @@
@param[in] CertLen The size of Certificate in bytes.
@param[in] InCa Pointer to the CA certificate
@param[in] CaLen The size of CA certificate in bytes.
- @param[in] InData Pointer to octect message hash to be checked.
+ @param[in] InData Pointer to octet message hash to be checked.
@param[in] InDataSize Size of the message hash in bytes.
- @param[in] Singnature The pointer to the RSA PKCS1-V1_5 signature to be verifed.
+ @param[in] Singnature The pointer to the RSA PKCS1-V1_5 signature to be verified.
@param[in] SigSize Size of signature in bytes.
@retval TRUE Valid signature encoded in PKCS1-v1_5.
