| /** @file | |
| Driver Binding functions and Service Binding functions for the Network driver module. | |
| Copyright (c) 2009 - 2016, Intel Corporation. All rights reserved.<BR> | |
| This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php. | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #include "Udp6Impl.h" | |
| EFI_DRIVER_BINDING_PROTOCOL gUdp6DriverBinding = { | |
| Udp6DriverBindingSupported, | |
| Udp6DriverBindingStart, | |
| Udp6DriverBindingStop, | |
| 0xa, | |
| NULL, | |
| NULL | |
| }; | |
| EFI_SERVICE_BINDING_PROTOCOL mUdp6ServiceBinding = { | |
| Udp6ServiceBindingCreateChild, | |
| Udp6ServiceBindingDestroyChild | |
| }; | |
| /** | |
| Tests to see if this driver supports a given controller. If a child device is provided, | |
| it further tests to see if this driver supports creating a handle for the specified child device. | |
| This function checks to see if the driver specified by This supports the device specified by | |
| ControllerHandle. Drivers will typically use the device path attached to | |
| ControllerHandle and/or the services from the bus I/O abstraction attached to | |
| ControllerHandle to determine if the driver supports ControllerHandle. This function | |
| may be called many times during platform initialization. In order to reduce boot times, the tests | |
| performed by this function must be very small, and take as little time as possible to execute. This | |
| function must not change the state of any hardware devices, and this function must be aware that the | |
| device specified by ControllerHandle may already be managed by the same driver or a | |
| different driver. This function must match its calls to AllocatePages() with FreePages(), | |
| AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol(). | |
| Because ControllerHandle may have been previously started by the same driver, if a protocol is | |
| already in the opened state, then it must not be closed with CloseProtocol(). This is required | |
| to guarantee the state of ControllerHandle is not modified by this function. | |
| @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance. | |
| @param[in] ControllerHandle The handle of the controller to test. This handle | |
| must support a protocol interface that supplies | |
| an I/O abstraction to the driver. | |
| @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This | |
| parameter is ignored by device drivers, and is optional for bus | |
| drivers. For bus drivers, if this parameter is not NULL, then | |
| the bus driver must determine if the bus controller specified | |
| by ControllerHandle and the child controller specified | |
| by RemainingDevicePath are both supported by this | |
| bus driver. | |
| @retval EFI_SUCCESS The device specified by ControllerHandle and | |
| RemainingDevicePath is supported by the driver specified by This. | |
| @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and | |
| RemainingDevicePath is already being managed by the driver | |
| specified by This. | |
| @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and | |
| RemainingDevicePath is already being managed by a different | |
| driver or an application that requires exclusive access. | |
| Currently not implemented. | |
| @retval EFI_UNSUPPORTED The device specified by ControllerHandle and | |
| RemainingDevicePath is not supported by the driver specified by This. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| Udp6DriverBindingSupported ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE ControllerHandle, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| // | |
| // Test for the Udp6ServiceBinding Protocol | |
| // | |
| Status = gBS->OpenProtocol ( | |
| ControllerHandle, | |
| &gEfiUdp6ServiceBindingProtocolGuid, | |
| NULL, | |
| This->DriverBindingHandle, | |
| ControllerHandle, | |
| EFI_OPEN_PROTOCOL_TEST_PROTOCOL | |
| ); | |
| if (!EFI_ERROR (Status)) { | |
| return EFI_ALREADY_STARTED; | |
| } | |
| // | |
| // Test for the Ip6ServiceBinding Protocol | |
| // | |
| Status = gBS->OpenProtocol ( | |
| ControllerHandle, | |
| &gEfiIp6ServiceBindingProtocolGuid, | |
| NULL, | |
| This->DriverBindingHandle, | |
| ControllerHandle, | |
| EFI_OPEN_PROTOCOL_TEST_PROTOCOL | |
| ); | |
| return Status; | |
| } | |
| /** | |
| Start this driver on ControllerHandle. | |
| This service is called by the EFI boot service ConnectController(). In order to make | |
| drivers as small as possible, there are a few calling restrictions for | |
| this service. ConnectController() must follow these | |
| calling restrictions. If any other agent wishes to call Start() it | |
| must also follow these calling restrictions. | |
| @param[in] This Protocol instance pointer. | |
| @param[in] ControllerHandle Handle of device to bind the driver to. | |
| @param[in] RemainingDevicePath Optional parameter use to pick a specific child | |
| device to start. | |
| @retval EFI_SUCCES This driver is added to ControllerHandle. | |
| @retval EFI_OUT_OF_RESOURCES The required system resource can't be allocated. | |
| @retval other This driver does not support this device. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| Udp6DriverBindingStart ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE ControllerHandle, | |
| IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| UDP6_SERVICE_DATA *Udp6Service; | |
| // | |
| // Allocate Private Context Data Structure. | |
| // | |
| Udp6Service = AllocateZeroPool (sizeof (UDP6_SERVICE_DATA)); | |
| if (Udp6Service == NULL) { | |
| Status = EFI_OUT_OF_RESOURCES; | |
| goto EXIT; | |
| } | |
| Status = Udp6CreateService (Udp6Service, This->DriverBindingHandle, ControllerHandle); | |
| if (EFI_ERROR (Status)) { | |
| goto EXIT; | |
| } | |
| // | |
| // Install the Udp6ServiceBindingProtocol on the ControllerHandle. | |
| // | |
| Status = gBS->InstallMultipleProtocolInterfaces ( | |
| &ControllerHandle, | |
| &gEfiUdp6ServiceBindingProtocolGuid, | |
| &Udp6Service->ServiceBinding, | |
| NULL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| Udp6CleanService (Udp6Service); | |
| goto EXIT; | |
| } | |
| EXIT: | |
| if (EFI_ERROR (Status)) { | |
| if (Udp6Service != NULL) { | |
| FreePool (Udp6Service); | |
| } | |
| } | |
| return Status; | |
| } | |
| /** | |
| Callback function which provided by user to remove one node in NetDestroyLinkList process. | |
| @param[in] Entry The entry to be removed. | |
| @param[in] Context Pointer to the callback context corresponds to the Context in NetDestroyLinkList. | |
| @retval EFI_SUCCESS The entry has been removed successfully. | |
| @retval Others Fail to remove the entry. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| Udp6DestroyChildEntryInHandleBuffer ( | |
| IN LIST_ENTRY *Entry, | |
| IN VOID *Context | |
| ) | |
| { | |
| UDP6_INSTANCE_DATA *Instance; | |
| EFI_SERVICE_BINDING_PROTOCOL *ServiceBinding; | |
| UINTN NumberOfChildren; | |
| EFI_HANDLE *ChildHandleBuffer; | |
| if (Entry == NULL || Context == NULL) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Instance = NET_LIST_USER_STRUCT_S (Entry, UDP6_INSTANCE_DATA, Link, UDP6_INSTANCE_DATA_SIGNATURE); | |
| ServiceBinding = ((UDP6_DESTROY_CHILD_IN_HANDLE_BUF_CONTEXT *) Context)->ServiceBinding; | |
| NumberOfChildren = ((UDP6_DESTROY_CHILD_IN_HANDLE_BUF_CONTEXT *) Context)->NumberOfChildren; | |
| ChildHandleBuffer = ((UDP6_DESTROY_CHILD_IN_HANDLE_BUF_CONTEXT *) Context)->ChildHandleBuffer; | |
| if (!NetIsInHandleBuffer (Instance->ChildHandle, NumberOfChildren, ChildHandleBuffer)) { | |
| return EFI_SUCCESS; | |
| } | |
| return ServiceBinding->DestroyChild (ServiceBinding, Instance->ChildHandle); | |
| } | |
| /** | |
| Stop this driver on ControllerHandle. | |
| This service is called by the EFI boot service DisconnectController(). In order to | |
| make drivers as small as possible, there are a few calling | |
| restrictions for this service. DisconnectController() | |
| must follow these calling restrictions. If any other agent wishes | |
| to call Stop(), it must also follow these calling restrictions. | |
| @param[in] This Protocol instance pointer. | |
| @param[in] ControllerHandle Handle of device to stop the driver on. | |
| @param[in] NumberOfChildren Number of Handles in ChildHandleBuffer. If the number | |
| of children is zero stop the entire bus driver. | |
| @param[in] ChildHandleBuffer List of Child Handles to Stop. It is optional. | |
| @retval EFI_SUCCES This driver is removed ControllerHandle. | |
| @retval EFI_DEVICE_ERROR Can't find the NicHandle from the ControllerHandle and specified GUID. | |
| @retval other This driver was not removed from this device. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| Udp6DriverBindingStop ( | |
| IN EFI_DRIVER_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE ControllerHandle, | |
| IN UINTN NumberOfChildren, | |
| IN EFI_HANDLE *ChildHandleBuffer OPTIONAL | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| EFI_HANDLE NicHandle; | |
| EFI_SERVICE_BINDING_PROTOCOL *ServiceBinding; | |
| UDP6_SERVICE_DATA *Udp6Service; | |
| LIST_ENTRY *List; | |
| UDP6_DESTROY_CHILD_IN_HANDLE_BUF_CONTEXT Context; | |
| // | |
| // Find the NicHandle where UDP6 ServiceBinding Protocol is installed. | |
| // | |
| NicHandle = NetLibGetNicHandle (ControllerHandle, &gEfiIp6ProtocolGuid); | |
| if (NicHandle == NULL) { | |
| return EFI_SUCCESS; | |
| } | |
| // | |
| // Retrieve the UDP6 ServiceBinding Protocol. | |
| // | |
| Status = gBS->OpenProtocol ( | |
| NicHandle, | |
| &gEfiUdp6ServiceBindingProtocolGuid, | |
| (VOID **) &ServiceBinding, | |
| This->DriverBindingHandle, | |
| NicHandle, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_DEVICE_ERROR; | |
| } | |
| Udp6Service = UDP6_SERVICE_DATA_FROM_THIS (ServiceBinding); | |
| if (NumberOfChildren != 0) { | |
| // | |
| // NumberOfChildren is not zero, destroy the children instances in ChildHandleBuffer. | |
| // | |
| List = &Udp6Service->ChildrenList; | |
| Context.ServiceBinding = ServiceBinding; | |
| Context.NumberOfChildren = NumberOfChildren; | |
| Context.ChildHandleBuffer = ChildHandleBuffer; | |
| Status = NetDestroyLinkList ( | |
| List, | |
| Udp6DestroyChildEntryInHandleBuffer, | |
| &Context, | |
| NULL | |
| ); | |
| } else if (IsListEmpty (&Udp6Service->ChildrenList)) { | |
| gBS->UninstallMultipleProtocolInterfaces ( | |
| NicHandle, | |
| &gEfiUdp6ServiceBindingProtocolGuid, | |
| &Udp6Service->ServiceBinding, | |
| NULL | |
| ); | |
| Udp6CleanService (Udp6Service); | |
| FreePool (Udp6Service); | |
| Status = EFI_SUCCESS; | |
| } | |
| return Status; | |
| } | |
| /** | |
| Creates a child handle and installs a protocol. | |
| The CreateChild() function installs a protocol on ChildHandle. | |
| If ChildHandle is a pointer to NULL, then a new handle is created and returned in ChildHandle. | |
| If ChildHandle is not a pointer to NULL, then the protocol installs on the existing ChildHandle. | |
| @param[in] This Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance. | |
| @param[in, out] ChildHandle Pointer to the handle of the child to create. If it is NULL, | |
| then a new handle is created. If it is a pointer to an existing UEFI handle, | |
| then the protocol is added to the existing UEFI handle. | |
| @retval EFI_SUCCES The protocol was added to ChildHandle. | |
| @retval EFI_INVALID_PARAMETER This is NULL or ChildHandle is NULL. | |
| @retval EFI_OUT_OF_RESOURCES There are not enough resources available to create | |
| the child. | |
| @retval other The child handle was not created. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| Udp6ServiceBindingCreateChild ( | |
| IN EFI_SERVICE_BINDING_PROTOCOL *This, | |
| IN OUT EFI_HANDLE *ChildHandle | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| UDP6_SERVICE_DATA *Udp6Service; | |
| UDP6_INSTANCE_DATA *Instance; | |
| EFI_TPL OldTpl; | |
| VOID *Ip6; | |
| if ((This == NULL) || (ChildHandle == NULL)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Udp6Service = UDP6_SERVICE_DATA_FROM_THIS (This); | |
| // | |
| // Allocate the instance private data structure. | |
| // | |
| Instance = AllocateZeroPool (sizeof (UDP6_INSTANCE_DATA)); | |
| if (Instance == NULL) { | |
| return EFI_OUT_OF_RESOURCES; | |
| } | |
| Udp6InitInstance (Udp6Service, Instance); | |
| // | |
| // Add an IpInfo for this instance. | |
| // | |
| Instance->IpInfo = IpIoAddIp (Udp6Service->IpIo); | |
| if (Instance->IpInfo == NULL) { | |
| Status = EFI_OUT_OF_RESOURCES; | |
| goto ON_ERROR; | |
| } | |
| // | |
| // Install the Udp6Protocol for this instance. | |
| // | |
| Status = gBS->InstallMultipleProtocolInterfaces ( | |
| ChildHandle, | |
| &gEfiUdp6ProtocolGuid, | |
| &Instance->Udp6Proto, | |
| NULL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| goto ON_ERROR; | |
| } | |
| Instance->ChildHandle = *ChildHandle; | |
| // | |
| // Open the default Ip6 protocol in the IP_IO BY_CHILD. | |
| // | |
| Status = gBS->OpenProtocol ( | |
| Udp6Service->IpIo->ChildHandle, | |
| &gEfiIp6ProtocolGuid, | |
| (VOID **) &Ip6, | |
| gUdp6DriverBinding.DriverBindingHandle, | |
| Instance->ChildHandle, | |
| EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| goto ON_ERROR; | |
| } | |
| // | |
| // Open this instance's Ip6 protocol in the IpInfo BY_CHILD. | |
| // | |
| Status = gBS->OpenProtocol ( | |
| Instance->IpInfo->ChildHandle, | |
| &gEfiIp6ProtocolGuid, | |
| (VOID **) &Ip6, | |
| gUdp6DriverBinding.DriverBindingHandle, | |
| Instance->ChildHandle, | |
| EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| goto ON_ERROR; | |
| } | |
| OldTpl = gBS->RaiseTPL (TPL_CALLBACK); | |
| // | |
| // Link this instance into the service context data and increase the ChildrenNumber. | |
| // | |
| InsertTailList (&Udp6Service->ChildrenList, &Instance->Link); | |
| Udp6Service->ChildrenNumber++; | |
| gBS->RestoreTPL (OldTpl); | |
| return EFI_SUCCESS; | |
| ON_ERROR: | |
| if (Instance->ChildHandle != NULL) { | |
| gBS->UninstallMultipleProtocolInterfaces ( | |
| Instance->ChildHandle, | |
| &gEfiUdp6ProtocolGuid, | |
| &Instance->Udp6Proto, | |
| NULL | |
| ); | |
| } | |
| if (Instance->IpInfo != NULL) { | |
| IpIoRemoveIp (Udp6Service->IpIo, Instance->IpInfo); | |
| } | |
| Udp6CleanInstance (Instance); | |
| FreePool (Instance); | |
| return Status; | |
| } | |
| /** | |
| Destroys a child handle with a set of I/O services. | |
| The DestroyChild() function does the opposite of CreateChild(). It removes a protocol | |
| that was installed by CreateChild() from ChildHandle. If the removed protocol is the | |
| last protocol on ChildHandle, then ChildHandle is destroyed. | |
| @param[in] This Protocol instance pointer. | |
| @param[in] ChildHandle Handle of the child to destroy. | |
| @retval EFI_SUCCES The I/O services were removed from the child | |
| handle. | |
| @retval EFI_UNSUPPORTED The child handle does not support the I/O services | |
| that are being removed. | |
| @retval EFI_INVALID_PARAMETER Child handle is NULL. | |
| @retval EFI_ACCESS_DENIED The child handle could not be destroyed because | |
| its I/O services are being used. | |
| @retval other The child handle was not destroyed. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| Udp6ServiceBindingDestroyChild ( | |
| IN EFI_SERVICE_BINDING_PROTOCOL *This, | |
| IN EFI_HANDLE ChildHandle | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| UDP6_SERVICE_DATA *Udp6Service; | |
| EFI_UDP6_PROTOCOL *Udp6Proto; | |
| UDP6_INSTANCE_DATA *Instance; | |
| EFI_TPL OldTpl; | |
| if ((This == NULL) || (ChildHandle == NULL)) { | |
| return EFI_INVALID_PARAMETER; | |
| } | |
| Udp6Service = UDP6_SERVICE_DATA_FROM_THIS (This); | |
| // | |
| // Try to get the Udp6 protocol from the ChildHandle. | |
| // | |
| Status = gBS->OpenProtocol ( | |
| ChildHandle, | |
| &gEfiUdp6ProtocolGuid, | |
| (VOID **) &Udp6Proto, | |
| gUdp6DriverBinding.DriverBindingHandle, | |
| ChildHandle, | |
| EFI_OPEN_PROTOCOL_GET_PROTOCOL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| return EFI_UNSUPPORTED; | |
| } | |
| Instance = UDP6_INSTANCE_DATA_FROM_THIS (Udp6Proto); | |
| if (Instance->InDestroy) { | |
| return EFI_SUCCESS; | |
| } | |
| // | |
| // Use the Destroyed flag to avoid the re-entering of the following code. | |
| // | |
| Instance->InDestroy = TRUE; | |
| // | |
| // Close the Ip6 protocol on the default IpIo. | |
| // | |
| gBS->CloseProtocol ( | |
| Udp6Service->IpIo->ChildHandle, | |
| &gEfiIp6ProtocolGuid, | |
| gUdp6DriverBinding.DriverBindingHandle, | |
| Instance->ChildHandle | |
| ); | |
| // | |
| // Close the Ip6 protocol on this instance's IpInfo. | |
| // | |
| gBS->CloseProtocol ( | |
| Instance->IpInfo->ChildHandle, | |
| &gEfiIp6ProtocolGuid, | |
| gUdp6DriverBinding.DriverBindingHandle, | |
| Instance->ChildHandle | |
| ); | |
| // | |
| // Uninstall the Udp6Protocol previously installed on the ChildHandle. | |
| // | |
| Status = gBS->UninstallMultipleProtocolInterfaces ( | |
| ChildHandle, | |
| &gEfiUdp6ProtocolGuid, | |
| (VOID *) &Instance->Udp6Proto, | |
| NULL | |
| ); | |
| if (EFI_ERROR (Status)) { | |
| Instance->InDestroy = FALSE; | |
| return Status; | |
| } | |
| // | |
| // Reset the configuration in case the instance's consumer forgets to do this. | |
| // | |
| Udp6Proto->Configure (Udp6Proto, NULL); | |
| // | |
| // Remove the IpInfo this instance consumes. | |
| // | |
| IpIoRemoveIp (Udp6Service->IpIo, Instance->IpInfo); | |
| OldTpl = gBS->RaiseTPL (TPL_CALLBACK); | |
| // | |
| // Remove this instance from the service context data's ChildrenList. | |
| // | |
| RemoveEntryList (&Instance->Link); | |
| Udp6Service->ChildrenNumber--; | |
| // | |
| // Clean the instance. | |
| // | |
| Udp6CleanInstance (Instance); | |
| gBS->RestoreTPL (OldTpl); | |
| FreePool (Instance); | |
| return EFI_SUCCESS; | |
| } | |
| /** | |
| This is the declaration of an EFI image entry point. This entry point is | |
| the same for UEFI Applications, UEFI OS Loaders, and UEFI Drivers, including | |
| both device drivers and bus drivers. | |
| The entry point for Udp6 driver that installs the driver binding | |
| and component name protocol on its ImageHandle. | |
| @param[in] ImageHandle The firmware allocated handle for the UEFI image. | |
| @param[in] SystemTable A pointer to the EFI System Table. | |
| @retval EFI_SUCCESS The operation completed successfully. | |
| @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. | |
| **/ | |
| EFI_STATUS | |
| EFIAPI | |
| Udp6DriverEntryPoint ( | |
| IN EFI_HANDLE ImageHandle, | |
| IN EFI_SYSTEM_TABLE *SystemTable | |
| ) | |
| { | |
| EFI_STATUS Status; | |
| // | |
| // Install the Udp6DriverBinding and Udp6ComponentName protocols. | |
| // | |
| Status = EfiLibInstallDriverBindingComponentName2 ( | |
| ImageHandle, | |
| SystemTable, | |
| &gUdp6DriverBinding, | |
| ImageHandle, | |
| &gUdp6ComponentName, | |
| &gUdp6ComponentName2 | |
| ); | |
| if (!EFI_ERROR (Status)) { | |
| // | |
| // Initialize the UDP random port. | |
| // | |
| mUdp6RandomPort = (UINT16)( | |
| ((UINT16) NetRandomInitSeed ()) % | |
| UDP6_PORT_KNOWN + | |
| UDP6_PORT_KNOWN | |
| ); | |
| } | |
| return Status; | |
| } | |