## @file | |
# FDF file of Clanton Peak CRB platform with 32-bit DXE | |
# | |
# This package provides QuarkNcSocId platform specific modules. | |
# Copyright (c) 2013 - 2015 Intel Corporation. | |
# | |
# This program and the accompanying materials | |
# are licensed and made available under the terms and conditions of the BSD License | |
# which accompanies this distribution. The full text of the license may be found at | |
# http://opensource.org/licenses/bsd-license.php | |
# | |
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
# | |
## | |
################################################################################ | |
# | |
# Defines Section - statements that will be processed to create a Makefile. | |
# | |
################################################################################ | |
[Defines] | |
# Address 0x100000000 (4 GB reset address) | |
# Base Size | |
# +---------------------------+ | |
# FLASH_BASE | FD.Quark: | 0x800000 (8 MB) | |
# 0xFF800000 | BaseAddress | | |
# +---------------------------+ | |
# | |
# Flash offsets are 0 based, but are relative to FD.Quark BaseAddress, e.g. Payload Base is at 0x400000, Flash Base is at 0xFF800000 for 8 MB SPI part. | |
# 0xFF800000 + 0x400000 = 0xFFC00000. | |
# | |
# Address 0x0 (0xFF800000 for 8 MB SPI part) | |
# +---------------------------+ | |
# FLASH_FV_PAYLOAD_BASE | Payload Image | FLASH_FV_PAYLOAD_SIZE | |
# 0x00400000 | | 0x00100000 | |
# +---------------------------+ | |
# FLASH_FV_MAIN_BASE | FvMain Image (Compressed) | FLASH_FV_MAIN_SIZE | |
# 0x00500000 | | 0x001E0000 | |
# +---------------------------+ | |
# NVRAM_AREA_BASE | NVRAM Area= | NVRAM_AREA_SIZE | |
# 0x006E0000 | Variable + FTW Working + | | |
# | FTW Spare | | |
# +---+-------------------+---+ | |
# NVRAM_AREA_VARIABLE_BASE | | NVRAM_AREA_VARIABLE_SIZE | |
# | | | |
# +-------------------+ | |
# FTW_WORKING_BASE | | FTW_WORKING_SIZE | |
# | | | |
# +-------------------+ | |
# FTW_SPARE_BASE | | FTW_SPARE_SIZE | |
# | | | |
# +---+-------------------+---+ | |
# RMU_BINARY_BASE | RMU Binary | RMU_BINARY_SIZE | |
# 0x00700000 | | 0x00008000 | |
# +---------------------------+ | |
# PLATFORM_DATA_BASE | PlatformData Binary | PLATFORM_DATA_SIZE | |
# 0x00710000 | | 0x00001000 | |
# +---------------------------+ | |
# FVRECOVERY_IMAGE_BASE | FVRECOVERY Image | FVRECOVERY_IMAGE_SIZE | |
# 0x720000 | | 0x000E0000 | |
# +---------------------------+ | |
# | |
# Define value used to compute FLASH regions below reset vector location just below 4GB | |
# | |
DEFINE RESET_ADDRESS = 0x100000000 # 4 GB | |
# | |
# Set size of FLASH to 8MB | |
# | |
DEFINE FLASH_SIZE = 0x800000 | |
DEFINE FLASH_BASE = $(RESET_ADDRESS) - $(FLASH_SIZE) # The base address of the Flash Device | |
# | |
# Set FLASH block size to 4KB | |
# | |
DEFINE FLASH_BLOCKSIZE = 0x1000 # 4 KB | |
# | |
# Misc settings | |
# | |
DEFINE FLASH_BLOCKSIZE_DATA = 0x00, 0x10, 0x00, 0x00 # equivalent for DATA blocks | |
# | |
# Start PAYLOAD at 4MB into 8MB FLASH | |
# | |
DEFINE FLASH_FV_PAYLOAD_BASE = 0x00400000 | |
DEFINE FLASH_FV_PAYLOAD_SIZE = 0x00100000 | |
# | |
# Put FVMAIN between PAYLOAD and RMU Binary | |
# | |
DEFINE FLASH_FV_MAIN_BASE = 0x00500000 | |
DEFINE FLASH_FV_MAIN_SIZE = 0x001E0000 | |
# | |
# Place NV Storage just above Platform Data Base | |
# | |
DEFINE NVRAM_AREA_VARIABLE_BASE = 0x006E0000 | |
DEFINE NVRAM_AREA_SIZE = 0x00020000 | |
DEFINE NVRAM_AREA_VARIABLE_SIZE = 0x0000E000 | |
DEFINE FTW_WORKING_BASE = $(NVRAM_AREA_VARIABLE_BASE) + $(NVRAM_AREA_VARIABLE_SIZE) | |
DEFINE FTW_WORKING_SIZE = 0x00002000 | |
DEFINE FTW_SPARE_BASE = $(FTW_WORKING_BASE) + $(FTW_WORKING_SIZE) | |
DEFINE FTW_SPARE_SIZE = $(NVRAM_AREA_SIZE) - $(NVRAM_AREA_VARIABLE_SIZE) - $(FTW_WORKING_SIZE) | |
# | |
# RMU Binary must be at fixed address 1MB below 4GB (0xFFF00000) | |
# | |
DEFINE RMU_BINARY_BASE = 0x00700000 # HW fixed address | |
DEFINE RMU_BINARY_SIZE = 0x00008000 # HW fixed address, so fixed size | |
# | |
# Platform Data Base must be 64KB above RMU | |
# | |
DEFINE VPD_BASE = 0x00708000 | |
DEFINE VPD_SIZE = 0x00001000 | |
# | |
# Place FV Recovery above NV Storage | |
# | |
DEFINE FVRECOVERY_IMAGE_SIZE = 0x000F0000 | |
DEFINE FVRECOVERY_IMAGE_BASE = $(FLASH_SIZE) - $(FVRECOVERY_IMAGE_SIZE) | |
################################################################################ | |
# | |
# FD Section | |
# The [FD] Section is made up of the definition statements and a | |
# description of what goes into the Flash Device Image. Each FD section | |
# defines one flash "device" image. A flash device image may be one of | |
# the following: Removable media bootable image (like a boot floppy | |
# image,) an Option ROM image (that would be "flashed" into an add-in | |
# card,) a System "Flash" image (that would be burned into a system's | |
# flash) or an Update ("Capsule") image that will be used to update and | |
# existing system flash. | |
# | |
################################################################################ | |
[FD.Quark] | |
BaseAddress = 0xFF800000 #The base address of the Flash Device; set to same value as FLASH_BASE. | |
Size = 0x800000 #The size in bytes of the Flash Device; set to same value as FLASH_SIZE. | |
ErasePolarity = 1 | |
BlockSize = $(FLASH_BLOCKSIZE) | |
NumBlocks = 0x800 #The number of blocks for the Flash Device. | |
SET gQuarkPlatformTokenSpaceGuid.PcdFlashAreaBaseAddress = $(FLASH_BASE) | |
SET gQuarkPlatformTokenSpaceGuid.PcdFlashAreaSize = $(FLASH_SIZE) | |
################################################################################ | |
# | |
# Following are lists of FD Region layout which correspond to the locations of different | |
# images within the flash device. | |
# | |
# Regions must be defined in ascending order and may not overlap. | |
# | |
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by | |
# the pipe "|" character, followed by the size of the region, also in hex with the leading | |
# "0x" characters. Like: | |
# Offset|Size | |
# PcdOffsetCName|PcdSizeCName | |
# RegionType <FV, DATA, or FILE> | |
# | |
################################################################################ | |
######################################################## | |
# Quark Payload Image | |
######################################################## | |
$(FLASH_FV_PAYLOAD_BASE)|$(FLASH_FV_PAYLOAD_SIZE) | |
gQuarkPlatformTokenSpaceGuid.PcdFlashFvPayloadBase|gQuarkPlatformTokenSpaceGuid.PcdFlashFvPayloadSize | |
FV = PAYLOAD | |
######################################################## | |
# Quark FVMAIN Image (Compressed) | |
######################################################## | |
$(FLASH_FV_MAIN_BASE)|$(FLASH_FV_MAIN_SIZE) | |
gQuarkPlatformTokenSpaceGuid.PcdFlashFvMainBase|gQuarkPlatformTokenSpaceGuid.PcdFlashFvMainSize | |
FV = FVMAIN_COMPACT | |
############################################################################# | |
# Quark NVRAM Area | |
# Quark NVRAM Area contains: Variable + FTW Working + FTW Spare | |
############################################################################# | |
$(NVRAM_AREA_VARIABLE_BASE)|$(NVRAM_AREA_VARIABLE_SIZE) | |
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize | |
#NV_VARIABLE_STORE | |
DATA = { | |
## This is the EFI_FIRMWARE_VOLUME_HEADER | |
# ZeroVector [] | |
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
# FileSystemGuid: gEfiSystemNvDataFvGuid = | |
# { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }} | |
0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C, | |
0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50, | |
# FvLength: 0x20000 | |
0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, | |
#Signature "_FVH" #Attributes | |
0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00, | |
#HeaderLength #CheckSum #ExtHeaderOffset #Reserved #Revision | |
0x48, 0x00, 0x19, 0xF9, 0x00, 0x00, 0x00, 0x02, | |
#Blockmap[0]: 32 Blocks * 0x1000 Bytes / Block | |
0x20, 0x00, 0x00, 0x00, $(FLASH_BLOCKSIZE_DATA), | |
#Blockmap[1]: End | |
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, | |
## This is the VARIABLE_STORE_HEADER | |
!if $(SECURE_BOOT_ENABLE) | |
# Signature: gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } } | |
0x78, 0x2c, 0xf3, 0xaa, 0x7b, 0x94, 0x9a, 0x43, | |
0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92, | |
!else | |
# Signature: gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }} | |
0x16, 0x36, 0xcf, 0xdd, 0x75, 0x32, 0x64, 0x41, | |
0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d, | |
!endif | |
#Size: 0x0E000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) - 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0x0DFB8 | |
# This can speed up the Variable Dispatch a bit. | |
0xB8, 0xDF, 0x00, 0x00, | |
#FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32 | |
0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 | |
} | |
$(FTW_WORKING_BASE)|$(FTW_WORKING_SIZE) | |
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize | |
#NV_FTW_WORKING | |
DATA = { | |
# EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEdkiiWorkingBlockSignatureGuid = | |
# { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }} | |
0x2b, 0x29, 0x58, 0x9e, 0x68, 0x7c, 0x7d, 0x49, | |
0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95, | |
# Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved | |
0xE2, 0x33, 0xF2, 0x03, 0xFE, 0xFF, 0xFF, 0xFF, | |
# WriteQueueSize: UINT64 #Size: 0x2000 - 0x20 (FTW_WORKING_HEADER) = 0x1FE0 | |
0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 | |
} | |
$(FTW_SPARE_BASE)|$(FTW_SPARE_SIZE) | |
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize | |
#NV_FTW_SPARE | |
######################################################### | |
# Quark Remote Management Unit Binary | |
######################################################### | |
$(RMU_BINARY_BASE)|$(RMU_BINARY_SIZE) | |
INF QuarkSocBinPkg/QuarkNorthCluster/Binary/QuarkMicrocode/QuarkMicrocode.inf | |
######################################################### | |
# PlatformData Binary, default for standalone is none built-in so user selects. | |
######################################################### | |
$(VPD_BASE)|$(VPD_SIZE) | |
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress | |
FILE = $(OUTPUT_DIRECTORY)/$(TARGET)_$(TOOL_CHAIN_TAG)/FV/8C3D856A-9BE6-468E-850A-24F7A8D38E08.bin | |
####################### | |
# Quark FVRECOVERY Image | |
####################### | |
$(FVRECOVERY_IMAGE_BASE)|$(FVRECOVERY_IMAGE_SIZE) | |
gQuarkPlatformTokenSpaceGuid.PcdFlashFvRecoveryBase|gQuarkPlatformTokenSpaceGuid.PcdFlashFvRecoverySize | |
FV = FVRECOVERY | |
################################################################################ | |
# | |
# FV Section | |
# | |
# [FV] section is used to define what components or modules are placed within a flash | |
# device file. This section also defines order the components and modules are positioned | |
# within the image. The [FV] section consists of define statements, set statements and | |
# module statements. | |
# | |
################################################################################ | |
[FV.FVRECOVERY] | |
BlockSize = $(FLASH_BLOCKSIZE) | |
FvAlignment = 16 #FV alignment and FV attributes setting. | |
ERASE_POLARITY = 1 | |
MEMORY_MAPPED = TRUE | |
STICKY_WRITE = TRUE | |
LOCK_CAP = TRUE | |
LOCK_STATUS = TRUE | |
WRITE_DISABLED_CAP = TRUE | |
WRITE_ENABLED_CAP = TRUE | |
WRITE_STATUS = TRUE | |
WRITE_LOCK_CAP = TRUE | |
WRITE_LOCK_STATUS = TRUE | |
READ_DISABLED_CAP = TRUE | |
READ_ENABLED_CAP = TRUE | |
READ_STATUS = TRUE | |
READ_LOCK_CAP = TRUE | |
READ_LOCK_STATUS = TRUE | |
FvNameGuid = 18D6D9F4-2EEF-4913-AEE6-BE61C6DA6CC8 | |
################################################################################ | |
# | |
# The INF statements point to EDK component and EDK II module INF files, which will be placed into this FV image. | |
# Parsing tools will scan the INF file to determine the type of component or module. | |
# The component or module type is used to reference the standard rules | |
# defined elsewhere in the FDF file. | |
# | |
# The format for INF statements is: | |
# INF $(PathAndInfFileName) | |
# | |
################################################################################ | |
## | |
# PEI Apriori file example, more PEIM module added later. | |
## | |
APRIORI PEI { | |
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf | |
# PlatformConfigPei should be immediately after Pcd driver. | |
INF QuarkPlatformPkg/Platform/Pei/PlatformConfig/PlatformConfigPei.inf | |
INF MdeModulePkg/Universal/PcatSingleSegmentPciCfg2Pei/PcatSingleSegmentPciCfg2Pei.inf | |
} | |
## | |
# SEC Phase modules | |
## | |
INF UefiCpuPkg/SecCore/SecCore.inf | |
INF MdeModulePkg/Core/Pei/PeiMain.inf | |
## | |
# PEI Phase RAW Data files. | |
## | |
FILE FREEFORM = PCD(gEfiQuarkNcSocIdTokenSpaceGuid.PcdQuarkMicrocodeFile) { | |
SECTION RAW = QuarkSocBinPkg/QuarkNorthCluster/Binary/QuarkMicrocode/RMU.bin | |
} | |
INF RuleOverride = NORELOC MdeModulePkg/Universal/PCD/Pei/Pcd.inf | |
INF QuarkPlatformPkg/Platform/Pei/PlatformConfig/PlatformConfigPei.inf | |
INF RuleOverride = NORELOC MdeModulePkg/Universal/FaultTolerantWritePei/FaultTolerantWritePei.inf | |
INF RuleOverride = NORELOC MdeModulePkg/Universal/Variable/Pei/VariablePei.inf | |
INF RuleOverride = NORELOC QuarkSocPkg/QuarkNorthCluster/MemoryInit/Pei/MemoryInitPei.inf | |
INF QuarkPlatformPkg/Platform/Pei/PlatformInit/PlatformEarlyInit.inf | |
INF MdeModulePkg/Universal/PcatSingleSegmentPciCfg2Pei/PcatSingleSegmentPciCfg2Pei.inf | |
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf | |
################################################################################ | |
# | |
# FV Section | |
# | |
# [FV] section is used to define what components or modules are placed within a flash | |
# device file. This section also defines order the components and modules are positioned | |
# within the image. The [FV] section consists of define statements, set statements and | |
# module statements. | |
# | |
################################################################################ | |
[FV.FVMAIN] | |
BlockSize = $(FLASH_BLOCKSIZE) | |
FvAlignment = 16 | |
ERASE_POLARITY = 1 | |
MEMORY_MAPPED = TRUE | |
STICKY_WRITE = TRUE | |
LOCK_CAP = TRUE | |
LOCK_STATUS = TRUE | |
WRITE_DISABLED_CAP = TRUE | |
WRITE_ENABLED_CAP = TRUE | |
WRITE_STATUS = TRUE | |
WRITE_LOCK_CAP = TRUE | |
WRITE_LOCK_STATUS = TRUE | |
READ_DISABLED_CAP = TRUE | |
READ_ENABLED_CAP = TRUE | |
READ_STATUS = TRUE | |
READ_LOCK_CAP = TRUE | |
READ_LOCK_STATUS = TRUE | |
FvNameGuid = 30D9ED01-38D2-418a-90D5-C561750BF80F | |
## | |
# DXE Phase modules | |
## | |
INF MdeModulePkg/Core/Dxe/DxeMain.inf | |
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf | |
!if $(SOURCE_DEBUG_ENABLE) | |
INF SourceLevelDebugPkg/DebugAgentDxe/DebugAgentDxe.inf | |
!endif | |
# | |
# Early SoC / Platform modules | |
# | |
INF QuarkPlatformPkg/Platform/Dxe/PlatformInit/PlatformInitDxe.inf | |
## | |
# EDK Core modules | |
## | |
INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf | |
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf | |
INF UefiCpuPkg/CpuDxe/CpuDxe.inf | |
INF MdeModulePkg/Universal/Metronome/Metronome.inf | |
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf | |
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf | |
INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf | |
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf | |
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf | |
INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf | |
INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf | |
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf | |
INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf | |
# | |
# Platform | |
# | |
INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf | |
#INF MdeModulePkg/Application/UiApp/UiApp.inf | |
INF QuarkPlatformPkg/Pci/Dxe/PciHostBridge/PciHostBridge.inf | |
INF QuarkSocPkg/QuarkNorthCluster/QNCInit/Dxe/QNCInitDxe.inf | |
INF PcAtChipsetPkg/HpetTimerDxe/HpetTimerDxe.inf | |
INF QuarkPlatformPkg/Platform/Dxe/Setup/DxePlatform.inf | |
# | |
# PCI | |
# | |
INF QuarkPlatformPkg/Pci/Dxe/PciPlatform/PciPlatform.inf | |
INF MdeModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf | |
INF QuarkSocPkg/QuarkSouthCluster/IohInit/Dxe/IohInitDxe.inf | |
!if $(SOURCE_DEBUG_ENABLE) | |
!else | |
INF MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.inf | |
!endif | |
# | |
# Console | |
# | |
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf | |
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf | |
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf | |
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf | |
INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf | |
INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf | |
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf | |
# | |
# File System Modules | |
# | |
INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf | |
################################################################################ | |
# | |
# FV Section | |
# | |
# [FV] section is used to define what components or modules are placed within a flash | |
# device file. This section also defines order the components and modules are positioned | |
# within the image. The [FV] section consists of define statements, set statements and | |
# module statements. | |
# | |
################################################################################ | |
[FV.FVMAIN_COMPACT] | |
FvAlignment = 16 | |
ERASE_POLARITY = 1 | |
MEMORY_MAPPED = TRUE | |
STICKY_WRITE = TRUE | |
LOCK_CAP = TRUE | |
LOCK_STATUS = TRUE | |
WRITE_DISABLED_CAP = TRUE | |
WRITE_ENABLED_CAP = TRUE | |
WRITE_STATUS = TRUE | |
WRITE_LOCK_CAP = TRUE | |
WRITE_LOCK_STATUS = TRUE | |
READ_DISABLED_CAP = TRUE | |
READ_ENABLED_CAP = TRUE | |
READ_STATUS = TRUE | |
READ_LOCK_CAP = TRUE | |
READ_LOCK_STATUS = TRUE | |
FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 { | |
SECTION GUIDED A31280AD-481E-41B6-95E8-127F4C984779 { # TIANO COMPRESS GUID | |
SECTION FV_IMAGE = FVMAIN | |
} | |
} | |
################################################################################ | |
# | |
# FV Section | |
# | |
# [FV] section is used to define what components or modules are placed within a flash | |
# device file. This section also defines order the components and modules are positioned | |
# within the image. The [FV] section consists of define statements, set statements and | |
# module statements. | |
# | |
################################################################################ | |
[FV.PAYLOAD] | |
BlockSize = $(FLASH_BLOCKSIZE) | |
FvAlignment = 16 #FV alignment and FV attributes setting. | |
ERASE_POLARITY = 1 | |
MEMORY_MAPPED = TRUE | |
STICKY_WRITE = TRUE | |
LOCK_CAP = TRUE | |
LOCK_STATUS = TRUE | |
WRITE_DISABLED_CAP = TRUE | |
WRITE_ENABLED_CAP = TRUE | |
WRITE_STATUS = TRUE | |
WRITE_LOCK_CAP = TRUE | |
WRITE_LOCK_STATUS = TRUE | |
READ_DISABLED_CAP = TRUE | |
READ_ENABLED_CAP = TRUE | |
READ_STATUS = TRUE | |
READ_LOCK_CAP = TRUE | |
READ_LOCK_STATUS = TRUE | |
# | |
# Shell and Applications | |
# | |
INF ShellPkg/Application/Shell/Shell.inf | |
!if $(PERFORMANCE_ENABLE) | |
INF PerformancePkg/Dp_App/Dp.inf | |
!endif | |
################################################################################ | |
# | |
# Rules are use with the [FV] section's module INF type to define | |
# how an FFS file is created for a given INF file. The following Rule are the default | |
# rules for the different module type. User can add the customized rules to define the | |
# content of the FFS file. | |
# | |
################################################################################ | |
[Rule.Common.SEC] | |
FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED { | |
TE TE Align = 8 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
RAW BIN Align = 16 |.com | |
} | |
[Rule.Common.PEI_CORE] | |
FILE PEI_CORE = $(NAMED_GUID) { | |
TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
[Rule.Common.PEIM.NORELOC] | |
FILE PEIM = $(NAMED_GUID) RELOCS_STRIPPED { | |
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
[Rule.Common.PEIM] | |
FILE PEIM = $(NAMED_GUID) { | |
PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
[Rule.Common.DXE_CORE] | |
FILE DXE_CORE = $(NAMED_GUID) { | |
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
[Rule.Common.UEFI_DRIVER] | |
FILE DRIVER = $(NAMED_GUID) { | |
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
[Rule.Common.DXE_DRIVER] | |
FILE DRIVER = $(NAMED_GUID) { | |
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
[Rule.Common.DXE_RUNTIME_DRIVER] | |
FILE DRIVER = $(NAMED_GUID) { | |
DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
[Rule.Common.DXE_SMM_DRIVER] | |
FILE SMM = $(NAMED_GUID) { | |
SMM_DEPEX SMM_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex | |
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
[Rule.Common.SMM_CORE] | |
FILE SMM_CORE = $(NAMED_GUID) { | |
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
[Rule.Common.UEFI_APPLICATION] | |
FILE APPLICATION = $(NAMED_GUID) { | |
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="$(MODULE_NAME)" Optional | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
[Rule.Common.UEFI_APPLICATION.UI] | |
FILE APPLICATION = $(NAMED_GUID) { | |
PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi | |
UI STRING="Enter Setup" | |
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER) | |
} | |
[Rule.Common.USER_DEFINED.ACPITABLE] | |
FILE FREEFORM = $(NAMED_GUID) { | |
RAW ACPI |.acpi | |
RAW ASL |.aml | |
} |