blob: 64e493f6346a757c964122224a850a8db7d4677e [file] [log] [blame]
/*
* Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <debug.h>
#include <tzc400.h>
#include "juno_def.h"
/*******************************************************************************
* Initialize the TrustZone Controller. Configure Region 0 with Secure RW access
* and allow Non-Secure masters full access
******************************************************************************/
static void init_tzc400(void)
{
tzc_init(TZC400_BASE);
/* Disable filters. */
tzc_disable_filters();
/* Region 1 set to cover Non-Secure DRAM at 0x8000_0000. Apply the
* same configuration to all filters in the TZC. */
tzc_configure_region(REG_ATTR_FILTER_BIT_ALL, 1,
DRAM_NS_BASE, DRAM_NS_BASE + DRAM_NS_SIZE - 1,
TZC_REGION_S_NONE,
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_CCI400) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_PCIE) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_HDLCD0) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_HDLCD1) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_USB) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_DMA330) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_THINLINKS) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_AP) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_GPU) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_CORESIGHT));
/* Region 2 set to cover Secure DRAM */
tzc_configure_region(REG_ATTR_FILTER_BIT_ALL, 2,
DRAM_SEC_BASE, DRAM_SEC_BASE + DRAM_SEC_SIZE - 1,
TZC_REGION_S_RDWR,
0);
/* Region 3 set to cover DRAM used by SCP for DDR retraining */
tzc_configure_region(REG_ATTR_FILTER_BIT_ALL, 3,
DRAM_SCP_BASE, DRAM_SCP_BASE + DRAM_SCP_SIZE - 1,
TZC_REGION_S_NONE,
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_SCP));
/* Region 4 set to cover Non-Secure DRAM at 0x8_8000_0000 */
tzc_configure_region(REG_ATTR_FILTER_BIT_ALL, 4,
DRAM2_BASE, DRAM2_BASE + DRAM2_SIZE - 1,
TZC_REGION_S_NONE,
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_CCI400) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_PCIE) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_HDLCD0) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_HDLCD1) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_USB) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_DMA330) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_THINLINKS) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_AP) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_GPU) |
TZC_REGION_ACCESS_RDWR(TZC400_NSAID_CORESIGHT));
/* Raise an exception if a NS device tries to access secure memory */
tzc_set_action(TZC_ACTION_ERR);
/* Enable filters. */
tzc_enable_filters();
}
/*******************************************************************************
* Initialize the secure environment. At this moment only the TrustZone
* Controller is initialized.
******************************************************************************/
void plat_security_setup(void)
{
/* Initialize the TrustZone Controller */
init_tzc400();
}